SUS PO Confirmation does not trigger XI message in SRM 7.0
I am not able to confirm PO Confirmations in SUS, however, I don't see any message trigger in SXI_MONITOR.
The events table BBPC_EVENT_DEF has an entry for BUS2232 event SENT.
It is my understanding the funciton module BBP_SAPXML1_SUSPCO_SEND gets called and then the event is triggered to generate the message.
Any help is highly appreciated.
Sai
Hi,
We have to use ACW for PO Response.. PCW will only for SRM side of business documents (SC,PO etc )..
Saravanan
Similar Messages
-
When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar -
One of the USB devices have malfunctioned and windows does not recognize it---MESSAGE
Upon plugin, One of the USB devices attached has malfunctioned and window does not recognize it message is displayed. I have tried different settings with the USB driver. Have reset the ipod. Have reinstalled itunes on computer and ipod.
HELP PLEASE!!!Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Package does not exist error-message
When I try to compile a java servlet with the following piece of code I get a compilation error referring to the import statement.
I have just included the initial import statements. A large number of errors follow, as a result of this 'package does not exist error-message'.
Has anyone encountered this or any ideas?
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.* ;
import java.io.* ;
import java.sql.* ;
import com.ericsson.snf.mps.mppapi.mtlr.*;
The error messages come from the 'import com.ericsson.snf.........' statement.
I am trying to integrate ericsson software, into my application.
Thanks,
java-mobile-userThat's probably because you are trying to integrate j2me suff with j2se/ee. That won't work without los of extra work..
-
I bought a used i pod 4 for my daughter and it does not have the message icon on it ( not even in settings) how can I get the message icon on it so it can receive and send messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Print with write statements from webynpro does not trigger top-of-page
Print launched from webdynpro application via application server created with write statements does not trigger top-of-page event. When print is done from sapgui it works ok. The idea is to reuse backend print which was created for sapgui with abap list made application log in webdynpro application.
Hi,
here a short extract like i do it:
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_PRINT_TOP_OF_PAGE
FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID,
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
* Event-Händer Implementierung
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
METHOD HANDLE_PRINT_TOP_OF_PAGE.
PERFORM PRINT_TOP_OF_PAGE.
ENDMETHOD.
ENDCLASS.
CREATE OBJECT GR_EVENT_HANDLER.
SET HANDLER
GR_EVENT_HANDLER->HANDLE_PRINT_TOP_OF_PAGE FOR GR_ALVGRID_LEFT.
CALL METHOD GR_ALVGRID_LEFT->SET_TABLE_FOR_FIRST_DISPLAY
FORM PRINT_TOP_OF_PAGE.
LINSZ = SY-LINSZ - 16.
WRITE: / 'Report: ', SY-REPID,
AT LINSZ 'Datum:', SY-DATUM.
WRITE: / 'Benutzer: ', SY-UNAME,
AT LINSZ 'Zeit: ', SY-UZEIT.
ENDFORM.
hope it helps.
Regards, Dieter -
BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.
These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.
-
Hello,
I am trying to trigger a scope at a certain point. I have a test signal coming after a regular sinusoid. I want to measure the output when the test signal arrives. What happens is that when my test signal comes after 1 second the trigger works perfectly fine but when my test signal comes after 3 seconds the scope does not trigger at the point I want and keeps on triggering at unwanted points. This is a conceptual question. Could anyone please help me in that.
Thanks,
KrunalHello Krunal,
I am not exactly sure what your external signal looks like, however I can suggest a couple things for you to look at. First, if the absolute value of your sine wave amplitude is less than the test point you want to measure, the scope can simply level trigger at that point. It should not matter if the signal comes in after 1 seconds or 3 seconds. The only problem you might be seeing with this is a timeout error. This is caused by the read function not being able to sample enough data within the default 5 seconds limit. Adjusting the timeout would help if you are getting this error.
If your test signal value you need to trigger off of is within the absolute value of your sine wave signal it becomes more difficult because if you specify to trigger off of a rising edge 0.5V signal this point will occur many times before the ideal trigger point. Perhaps a combination of using the trigger hold off and trigger delay might help you time the start of your acquisition a little better. If this does not help, can you please post more detail about the sine wave, your test point you want to trigger off and the behavior you are currently seeing.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D -
I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Custom segment does not exist for message type Debmas_cfs
Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabhHi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi -
Stacked sequence does not trigger
I am reviewing Pull-down Menu.vi in Labview BasicsII: Development Coarse Manual. When I go through Exercise 2-7, I never get the dialog boxes. I have the Get Menu Selection wired to the stacked sequence where it connects to the box containing the question mark. When I choose "Test 2" or any of the menu choices, it does not trigger the frames.
I ran the program in solutions on the disk, and this program runs correctly, showing the dialog boxes.
I have had this problem before. I connect a wire to a stacked sequence where it shows the question mark. But the stacked sequence ignores the information coming to it.First, I think you're refering to a case structure and not a sequence structure.
Second, you are probably not defining your cases properly. You can use probes to examine exactly what data you're sending to the case structure selector terminal (that's the question mark). If you are using strings, the strings have to much exactly to the strings in the case definition. If they don't match, the default case will execute. If, after using a probe to see what data you are sending the case structure, and after making sure you defined the cases correctly, you still don't see what's wrong, you should post your VI.
I realize saying this is a bit unnecessary, because you already started, but...
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world! -
RF_BELEG GMR, number range interval 51 does not exist FBN1 Message no. NR75
HI ALL
IAM GETTING THIS MESSAGE WHILE POSTING MIGO
For object RF_BELEG GMR, number range interval 51 does not exist FBN1
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code: FBN1
Regards,
parameshwarHi,
check following link
[problems in goods receive t.code MIGO;
Regards
Kailas Ugale -
Compressor does not show success message
Compressor finishes job but not give message. Message is 0:00:00 remaining.
Does not give success message even though the job is finished.
Compressor 4.0.7 on iMac 21,5, Core i5 2.5, 4GB RA, OS X 10.8.3 (12D78) - Mountain Lion
Not long ago it worked normally.
Now, finishes rendering, however, does not show the message finishedI know what you mean. When it has happened to me, I have been able to get it to complete by hitting cancel. Then in the file info field of the job pane, adding a numeral to the name. Then re-submitting. The encoding progress bar would quickly go to the end and complete,
Russ -
ADF FACES: af:messages/ does not display my messages at all
I am having an issue displaying messages using ADF MyFaces EA20.
<af:messages />
Within all backing beans I call messages with the following method to conveniently display messages when needed.
// Add invalid email address message
JSFUtils.addMsgToContext(FacesMessage.SEVERITY_ERROR, "setEmail_error", MsgConstants.INVALID_EMAIL);
The method utilized can be seen below:
public static void addMsgToContext(FacesMessage.Severity severity, String msgKey, String descKey) {
// Check the parameter, if either short desc or desc both are empty
if (StringUtils.isEmpty(descKey)) {
logger.error("Message description are empty. Do NOTHING just return");
return;
try {
logger.debug("Add Message to Context");
FacesContext context = FacesContext.getCurrentInstance();
Application application = context.getApplication();
// Add the message to the context
context.addMessage(msgKey, getMessageFromBundle(descKey, severity));
} catch (RuntimeException e) {
* Supress RuntimeException.
logger.error("Error occured when add message to context", e);
With the first login page when validating username and password, the messages I send to the context display correctly, for example, incorrect password please try again and this uses exactly the same code as above in the backing bean.
However once a session has started the messages simply do not get displayed and are not included in the HTML the <af:messages /> is replaced with nothing.
No runtime exception is thrown.
If anyone has any idea of why the messages are not being displayed I would be very grateful to hear them.
Finally if I may add that I used this method of displaying messages in a previous project and it was fine. This time the only difference is that I am using Hibernate.
The closest answer I could find to a similar issue with Oracle Forums was:
The messages have to be added before the Render Response phase. It's generally very unusual to add messages in a bean getter/setter. I'd restrict yourself to adding messages in event listeners and actions.
I do put messages in my setter methods as this is where I perform validation, but I have tried moving them to the main method called by the action button and this still does not display my messages.Frank
There is a standard way? Next time you can simply tell me to RTFM ;-) . I am working on a project and was assigned my particular section and was told that the messaging aspect and validation was not urgent, until now near the end of the project when it has become urgent. Rather then listen to my colleagues answer of "this is the way to do it" your answer suggested that we working in a non-standard way.
Having looked at Oracle JDeveloper 10g (10.1.3) Documentation, Validation, Conversion, and the Application Lifecycle section I noticed:
Render response:
Either display new page based on invoked navigation rules, or displays same page with errors.
I was providing a new navigation String to the same page under all conditions, which I guess gives a new context and so does not display the messages. Under error conditions I now return an empty navigation String and now it displays my messages.
Thank you for your help with this and I promise to read the manual next time.
Andrew -
Whenever i reply to an email i get message that receiver does not accept relay messages.
I have a work email. Whenever I set it up on my Iphone 5 I dont get my calendar. Whenever I try responding to an email I get message "receiver does not accept relay messages"
Your outgoing mail server settings is wrong. Go back in and make sure the password is correct.
Maybe you are looking for
-
Implicit & Explicit Null Labels
Hi.. I am a bit confused in Implicit and Explicit null labels. The RFC Says as follows : IMPLICIT NULL LABEL:This label value is only legal at the bottom of the label stack. It indicates that the label stack must be popped, and the forwarding of the
-
Not able to cancel the Excise invoice for STO process
Hi All, In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the sam
-
I had to force quit from iphoto... then I tried to reopen iphoto and it gave me a Caution message. The iphoto library is locked, on a locked disc, or you do not have permission to make changes to it.... What do I do to be able to get to my photograph
-
Error message "some of your quicktime software is out of date...."
After about 8 hrs of troubleshooting so far I need help here...please...I have a new ipod touch 3g (32gb) that requires itunes-9 and i have itunes-8. when i try to load itunes-9 i get the same error message about apx. half way thru the install. at th
-
Call rfc from Java Web application.
Hi: I am new to SAP Java programming. I am developing a java web application on SAP NW SP16. I need to call a rfc and process the data to be displayed on a jsp page. I have few questions... 1) Can I use the JCO destination created in thru wed dynpro