SUS PO document number same as ECC PO number

Hi Experts,
We are on SRM 7.0 with ECC EHP4, SUS4.0 with SRM on single client.
The requirement is to have the same SUS PO document number as the ECC PO number so that supplier would not require to refer to another number and avoid confusions.
Else can we hide SUS  document link and enable the PO document number as a link for processing in SUS. Please let me know the best possible solutions if any.
Thanks,
-Devi Swain

Hi Devi,
There seems a liitle chance of confusion as the ECC PO no. is also displayed along with SUS document number in the "List of PO" screen and also in the PO secreen.
Making ECC PO no. as a link would defitely require development and then you have to hide the SUS document no. to avoid presumed confusion.
What i have proposed to my client is that we will include the ECC PO no. on the PO print (through smartforms). This was well accepted.
You may try to propose this.
If not accepted then the only way is development.
Regards,
Ashish

Similar Messages

  • APO vendor location number is not same as ECC vendor number.

    Hi Friends,
    I have an issue with CIFing Vendors from ECC to APO. ECC team has created Vendors ie Vendor numbers and Description.
    For Example I have vendor 10000101 in ECC and when I CIF it to APO using integration model I have no issues. The issue is when I check the CIFed vendor location exist in APO. Using 10000101 and location type 1011 if i try to search for vendor it say vendor does not exist. When I add two zeroes ie 0010000101 now I will be able to view the vendor details.  My query is I want to see the same vendor number ie ECC 10000101 (Vendor) in APO. Is there any setting that Iu2019m missing? I really appreciate if someone come up with answer.
    Regards
    KRN

    Hi Senthil ,
    Thank you for your reply. The steps you have mentioned here is for replicating the numbering format for materials. ECC<=>APO. I have  customized material numbering format using the lexicographical under SPRO>APO>Product>Output format of product number. This activity I have already done.
    My question was regarding the vendor number. When I CIF the vendor from ECC to APO. In ECC it does not have leading zeroes but when I see in APO it has leading zeroes. This is where I was wondering and want to know is there any customizing activity to replicate the same ECC vendor number in APO.
    Also I need to know if I have the leading zeroes vendor number in APO will it affect my SNP planning. Mean to say ECC without leading zeores and APO with leading zeroes.
    Regards
    KRN

  • How to show Invoice number same as Sales Order Number..?

    HI,
    I need to show Sales Order Number same as Invoice Number how i can setup this..? can any one help me on this..?
    Ex: I raised a Sales Order: 00001, this has booked and shpieed now i ran the WF back ground process and run the autocreate master program to generate the invoice, here i need to show the invoice number as 00001 i..e same as the Sales Order Number.
    How i can achieve this..?
    Please advice..
    Regards,
    KV.

    KV,
    I suspect you'll need to customize the Autocreate routine to ignore the sequence nextval call and instead look at your sales order number.
    You would also need to be very careful that your OM setups supported this. I've seen this as a 'business requirement' before but almost invariably it doesn't make a lot of sense when you have the originating sales order number, line and shipment to quote as a reference on the invoice. Have you considered all of the following:
    <li> If you ever need to short ship or to ship on different dates, you will need more than one invoice for the same order. How would you manage that given that those invoices would need unique numbers?
    <li> Different order types - by adopting a 'synchronized' invoice sequence, you will need to ensure that you don't create a conflict with order type sequences - i.e. OM allows you to have an order 100001 of Order Type A and an order 100001 of Order Type B if you give different sequence assignments but this would cause problems with your invoice sequence.
    Regards,
    Jon

  • MM and FI document number same

    Dear Experts,
    Can any one tell me how to make the MM document Number range and FI number range same for credit memo in MIRO.
    Now we are facing a problem that MM and FI document is different.
    We are trying to make Print out for Credit Memo.
    The tables used are BSET and RBKP.
    But both this tables different numbers are coming for documents posted.
    Your valuable suggestion will be highly appreciated.

    Dear,
    With number range assignments - I believe you can achieve your requirement together with FI consultant.
    Well most of the businesses not follow this, even for trial purpose also I cannot test this since in quality, dev and sandbox will affect other functionalities. You can check this in your system.
    Please also check the link: http://help.sap.com/saphelp_46c/helpdata/en/65/9c466f0e18d311ae620060b03c9bbe/content.htm
    Make the following settings, if the MM document and FI document are to have the same document number:
    Number assignment:
    Configure internal number assignment for MM and external number assignment for FI.
    Number range interval:
    Configure number range interval 01 for MM and number range interval EX for FI.
    Document types used in company code:
    For each company code used in MM for which external number assignment is configured, the same number range interval must be configured in FI. For example, maintain the following document types in FI for each company code:
    EX: 0001, RE
    EX: 0001, RN
    EX: 0002, RE
    EX: 0001, RN
    Transaction:
    Configure transaction RD (Logistics Invoice Verification) in MM.
    Number range:
    Configure the same number ranges for MM and FI, for example, 5106000000-5106999999.
    Regards,
    Syed Hussain.

  • MM-SUS Scenario - BP Creation from MM with external number

    Hi Gurus,
    We are implementing MM-SUS scenario on landscape involving ECC 6.0 EHP5 and SRM 7.0 EHP1.
    In connection with Vendor transfer from ECC to SUS, We want to achieve that ECC vendor and SUS business partner (BP) have the same number (I E: vendor 300000 in ECC has BP 300000 in SUS)
    But in the tests we performed sending vendors executing on ECC tx BD14 (via PI system), SUS ever creates Business Partners with numbers from internal range in spite of we have available external number range.
    Can anyone tell me if is possible or SUS is able in standard way, receive a vendor xml message and perform BP creation with the same number (XML field <PartnerID>) sended from ECC.
    I appreciate any help of yours. Thanks in advance.
    Regards,
    Horacio Miranda

    Than you very much again Nikhil.
    Also SAP answered to us about this topic as how you did, and definetely is impossible manage in SUS same number for BPs as vendor number in ECC.
    Regards,
    Horacio Miranda

  • Wrong Document typed picked in ECC  Intermediate during CRM invoice Cancel.

    Dear SAP,
    When we cancel an CRM invoice(1159980135) from CP1 (CRM System) FI
    entry(1102100182)in ECC has been posted with AB document type instead
    of RV document type, and
    also system has picked posting key 12(Credit Memo) Instead if 11
    (Reversal Invoice).
    This kind of issue happened twice from last month. it is happening some of the documents we do not have any clue for whihc document and happing intermediately.
    We tried to reproduce the same scenario in our quality system(CT1) but
    FI entry is getting posted with correct document type RV and posting
    key 11.
    Attached screen shots from (CP1) CRM system for your reference.
    Let me know if you need additional information for analysis.
    If reqire send us the Email i will attache the custmization sceen shots
    Regards,
    Prakesh

    Hi SF,
       Most of the times document flow will not be updated in CRM, if any inbound queues are not processed completely in CRM.  This issue happens, when billing document is created in ECC and at that time if some one is in change mode of the order, inbound queue fails with status SYSFAIL.
       Please look into the inbound queues in CRM, release if any queues are failed. 
    Regards,
    Bhanu

  • Inconsistency between a document field and the prof. segment number

    Hi,
    While processing an invoice in one company code for vendor# XXX with the PO# AAAA line# 10, it is showing below error message while posting. Please advise on the below error or fix the issue to post the invoice in to SAP. The using screen T-code is miro.
    Inconsistency between a document field and the prof. segment number
    *Message no. KE396
    *Diagnosis
    A line item was assigned to a profitability segment (number 0008629207) which has the value 0000101000 for characteristic Profit Center. The original document (FI document, sales order, internal order, etc.), however, contains 0000102020 in this field. It is therefore inconsistent with the profitability segment found.
    System response
    The characteristics in Profitability Analysis (CO-PA) must have the same characteristic values as the original document. For example, you cannot assign a sales order to a different customer or product than the one contained in the original sales order. If you wish to fill the characteristics with different contents, you must change the original fields.
    Procedure
    Enter the correct characteristic values on the CO-PA assignment screen. The system will automatically assign a corresponding profitability segment number. If it is not possible to enter values in some of these fields, delete the entire assignment to a profitability segment number and then enter it again.
    As a rule, you should first enter the fields in the original sender document and then make the assignment to a profitability segment.
    What should I do for the above pl ?
    Regards
    Murali

    Hi,
    While doing PGR at VL32N, we are facing this error. Can someone assist.
    Regards,
    Aruna

  • FAGLL03-GRN number without extension of item number for few documents in Le

    In GR/IR account 31901 and 31903, Ref. Key 3 field has shows the year & GRN number without extension of item number for few documents in Ledger view(FAGLL03).  But, if we go through the entries for the same in document display, it will shows with extension numbers, due to this reason auto clearing is not happening for these documents through F.13. Please help.

    PO number at the item level of sc or at the header level of the sc next to description
    Such requirement is going to be difficult to achieve because not only one SC could yield multiple POs, but one SC item could potentially have multiple follow on POs. It's not always a 1:1 relation that can simply be presented in a table row. That is one of the main reasons one separated tab is dedicated to follow-on document.

  • FAGLL03-GRN number without extension of item number for few documents

    In GR/IR account 31901 and 31903, Ref. Key 3 field has shows the year & GRN number without extension of item number for few documents in Ledger view(FAGLL03). But, if we go through the entries for the same in document display, it will shows with extension numbers, due to this reason auto clearing is not happening for these documents through F.13. Please help.

    Hi Dear,
    Thanks for reply....
    I use this code, in the LOOP AT ITAB...
          IF bseg-ebeln = ' ' AND bseg-KOART eq 'K' .
            itab-lifnr = bseg-lifnr.
          ENDIF.
    But, not working....means its not displaying Vendor name against Document Number in BSEG.
    Plz let me know...How...where i can change,,,

  • Documents manually posted within dep.doc.number range

    Hi All,
    I am running the AFAB and this error message is displayed.
    "Documents manually posted within dep.doc.number range"
    I am using the document type AF with the external number range
    AF     2008     1120000000     1129999999
    Do you have any idea what is happening?
    Thanks in advance,
    Miguel.

    Hi,
    I experience the same thing and I'm using ver 4.6C. I've tried to insert the additional number range in FBN1 but I have to remove the extenal number indicator first before I can enter the number.
    But when I want to run the depreciation, I've got another error i.e. please create number range as external number. So i believe there is no effect.
    When I check in TABA, the number range still maintain the same.
    Please help coz my user need to view their asset balance urgently.

  • Excise No. using  Accounting Document Number and the P.O. number

    Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number.
    Now, the requirement is to display the excise no..
    Tried different tables in SE11 using J_1EXC for excise detials, but to no avail.
    And last which vendor to pick, Because vendors in P.O and BSEG differs.
    If I use the BSEG-BELNR I get a different vendor & If I use the P.O. no. in EKKO then also I get a different vendor.
    Please suggest.

    Hi,
    Actually the vendor in the accounting document and PO should match. If not look in table EKBE, It will have the accounting document or at least the invoice receipt against which accounting document would have been created. Check if the vendor number matches with the invoice receipt.
    Regarding the excise number I'm not sure what you mean, If you mean excise invoice number, you can look at the J_1IEXCDTL
    J_1IEXCHDR tables. You could check with FC on what basis the document is getting created to make out the relation ship. If it is vendor excise no etc. you can hit F1 help to find out the table etc.
    Hope it helps.
    Sujay

  • Error while uploading document with same name in Document library

    Hi,
    Whenever I try to upload document with same name in Document library it throws an error. I know its a default behavior but is there any way so that I can upload documents with same name or can we append some unique id with title of the document?
    Please suggest.
    Thanks

    No, unfortunately this is not possible. SharePoint treats the file name as the primary key identifier for a document so if you try to upload a second document with the same name it will assume this is a new version of the file. If you have versioning enabled
    on the document library, it will add this as a new version. If not, it will overwrite the original file with the new one.
    If you need two documents with the same name, you will have to either place them in different folders within a document library or in different document libraries.
    http://stackoverflow.com/questions/11894968/uploading-documents-with-same-name-to-sharepoint-2010
    Regards,
    Rajendra Singh
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
    http://sharepointundefind.wordpress.com/

  • How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

    Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
    The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
     Is this possible?Please suggest.

    Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
    Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
    which doesn't require any special scripts and is tough.
    You can have a look at the following links:
    http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
    http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
    http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
    The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
    http://www.pdflib.com/knowledge-base/pdf-security/
    Balaji Kundalam

  • Mutual Changes of sales document in  CRM and ECC

    HI
    1.We have a scenario as we are creating orders in CRM, but want to change the same in ECC. Also whatever changes we do in ECC should flow back to CRM.
    2.Similarly, if we create sales order in ECC, it should be changeable in CRM and the corresponsing changes flow back to ECC.
    I came across following SAP notes for the same.
    1.889051: Scenario A
    2.642944:Interdependent changes
    My question is What is the difference between Scenario A and Interdependent Changes?
    Please help urgently.
    Regards

    Hi D J,
    Check the below link.
    Data Exchange CRM <--> ECC Sales transactions
    Hope this helps.
    Thanks.
    Best Regards,
    Arun Sankar.

  • Open a document in same window

    Hi
    We have a requirement to open a document in same window(lower part) when a link or button is clicked. Is there any sample explaining how to do that?

    Hi,
    you can use af:inlineFrame component
    Frank

Maybe you are looking for