SUS Scheduling agreement - MM SUS Scenario
Hi,
In MM SUS scenario, we create Scheduling agreement and the delivery schedule will be released and schedule will be sent to SUS which is a standard functionality.
But our requirement is to send the Scheduling agreement as whole..like we sned PO from MM to SUS. Does it work if I create a custom idoc message type similar to PO (orders) with proper segments relevant to Scheduling agreement and corresponding mapping with XML in SUS ?
Has anybody worked on this kind of development? if yes please share some inputs.
Appreciate any help
Regards
Kiran
Hi Abhishek,
we don't want to change the idoc type: we would like to know if is correct to configure idoc DESADV for ASN created on SUS from a scheduling agreement release...because the idoc DESADV is not registered on ECC6 because of the error mentioned in my first post.
Anyway, the note you suggested is referred to software components that differ from ours.
Thanks for suggestion.
Francesca
Similar Messages
-
Scheduling agreement in subcontracing scenario
Dear All,
In our client they are using the scheduling agreement for subcontracting scenario in legagy system.
How can we map this in SAP?
I created scheduling agreement for subcontracting vendor but could not see the BOM for line item.And when i am doing MB1B by 541 movement type system is giving the error massage that the `purchase order dont have any item`.
Please give me the inputs.
Regards,
RamuHi
For Subcontrcting through MRP
Other than the normal, in material master MRP 2 view u need to maintain the special procurement. And maintain BOM (CS01), Create scheduling agreement and manitain delvery lines in ME38, and do the transfer posting in MB1B (541 Movement type) and do the GR at MIGO (101 Movement type).
Please check it once.
Regards,
Raman -
Hi
Can anybody let me know,
What are the steps involve in creation of scheduling agreement and distributing the scheduline lines to SUS.
Regards
AshishIn R/3 go to transaction -->
ME31L ---> Create Scheduling Agreement
ME38 ---> Maintain Delivery Schedule
ME84 ---> Create SA Releases
Once this is done --> and all the configurations are in place , system will SEND
SAR to SUS. -
Scheduling Agreement not going to srm
Hi,
Wwhile transfering the SA thru a msg type , we are not able to post it to SRM wen we use the doc type xxx, but if we use the doc type yyy it gets posted .
Please let me know wat setting needs to be changed to send the SA to SRM using doc type xxx thru the msg.
Regards,
ManuHi
<b>Please go through the links below -></b>
http://help.sap.com/saphelp_srm50/helpdata/en/17/303f412124de2be10000000a1550b0/frameset.htm
Re: BADI for Backend Scheduling Agreement
try to transfer scheduling agreement in sus
http://help.sap.com/saphelp_srm50/helpdata/en/da/151241c738f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/f9a830c2673ee2e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/f9a572c2673ee2e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/7d/0a093f7c392e5ae10000000a114084/frameset.htm
Scheduling agreement in SRM 5
http://help.sap.com/saphelp_srm50/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/fa/8a0d41f0faef23e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/c9df3b6ac34b44e10000000a114084/frameset.htm
Re: Benefits SRM contracts compared to MM contracts
Re: Transfer contracts form backend R/3 to EBP
Error in Backend Scheduling agreement Creation
SRM -ECC: Scheduling Agreement Failing
Regards
- Atul -
Scheduling agreement from backend to srm
Hi SRM Gurus,
Can I have the stepup step procedure for a backend scheduling agreement transfer to SRM.
Means we have a scheduling agreement in backend but the further process we have to do in SRM like schedule lines generation.
I suppose we need to have PDP.
Can anyone suggest?
Reg.,
Sridhar.Hi
<b>Please go through the links below -></b>
http://help.sap.com/saphelp_srm50/helpdata/en/17/303f412124de2be10000000a1550b0/frameset.htm
Re: BADI for Backend Scheduling Agreement
try to transfer scheduling agreement in sus
http://help.sap.com/saphelp_srm50/helpdata/en/da/151241c738f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/f9a830c2673ee2e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/f9a572c2673ee2e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/7d/0a093f7c392e5ae10000000a114084/frameset.htm
Scheduling agreement in SRM 5
http://help.sap.com/saphelp_srm50/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/fa/8a0d41f0faef23e10000000a155106/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/c9df3b6ac34b44e10000000a114084/frameset.htm
Re: Benefits SRM contracts compared to MM contracts
Re: Transfer contracts form backend R/3 to EBP
Error in Backend Scheduling agreement Creation
SRM -ECC: Scheduling Agreement Failing
Regards
- Atul -
Schedule lines tranfer from R/3 to SUS in a MM-SUS scenario
Hi SRM gurus,
We are working on the MM-SUS scenario where the scheduling agreement is created in the backend R/3 system. Delivery schedule lines are generated in the backend and transfered to the SUS thru. ME9E transaction for sending the delivery schedule to the SUS.
We have a confirmation control key which guides us in SUS to create an ASN in the backend.
Though there is a confirmation control key exist in the SA for that particular line item, when the ASN is sent from SUS to XI to R/3. There is an idoc error in the R/3 which says that there is no confirmation control key though it is there for the line item which is transfered to SUS.
Now Pls. answer my questions :
1) Will ME9E transfer the total lines in the SA or the schedule lines with the delivery schedules only ?
2) Is it possible to resend the same schedule line ( with the updated delivery schedule) to the SUS as per the standard scenario?
3) In the SUS how do we findout the materials corresponding to that particular delivery schedule line. Because in SUS the reference is only the scheduling agreement number as we could not see any scheduline line item.
Pls. suggest.
We are working on SRM(SUS) 5.0 with ECC6.0 as the backend.
Best regards,
Sridhar.i have seen the code --> where the FM is called for creation of SAR in SRM.
that is FM
BBP_SAPXML1_SUSPO_CREATE_IN --> in this --> search for this
Call API
IF ls_header-description EQ 'DELINS'.
CALL FUNCTION 'BBP_API_SUSPO_CRT'
EXPORTING
is_header = ls_header
it_item = lt_item
it_attach = lt_attach
it_partner = lt_partner
it_longtext = lt_longtext
it_tax = lt_tax
it_limit = lt_limit
it_sdln = lt_sdln
IMPORTING
es_header = ls_header_e
this one creates ---> the SAR in SRM.
and also i have seen further --> there is no place where any BADI is also called.
i am afraid it is not possible to control what you want using BADI.
only --> difference between --> New document and the old document is
the Indicator --> C for create
U for update.
And Also if you can see the XML message for the updated document --> you can see all the lines in the XML message.
Not the added lines... -
Open quantity not displayed in SUS for Scheduled agreement
Hi,
When trying to send a Scheduled agreement from R/3 4.7 to SUS using the
Idoc DELINS, we are getting the open quantity in SUS in column
Quantity. There is another column as Open which should display the
available open quantity in the system for the material which is not
displaying. Plz do let me know what should be done to get the open
quantity in the column.
Regards,
AnandHi
<u>Seems to be like some OSS note is missing in the system.</u>
Please refer to the following OSS notes.
<b>
865410 SRM50-SUS: Missing follow-on doc buttons in sched agrmnt rel
807935 SRM40-SUS: Create links do not show all purchase orders
608760 BAdI for flexible plnd indep. requiremt settlement/reduction
976264 Archiving enhancements in purchasing for ERP 2005
806361 Partner ID of the sold-to party in the SUS-MM scenario
791662 SUS-MM: U.S. postal codes are not transferred correctly
791006 SUS-MM: Updated IDoc creates new order</b>
Have you raised any OSS message with SAP on this yet ?
Regards
- Atul -
Schedule Agreement release to SUS
Hello Experts,
We are implementing MM-SUS. I am new to SUS. Please let me know step by step configuration required to send Schedule lines created (ME38) for Schedule agreement (ME31L) to send to SUS.
I have run the transaction ME84. But it returns with Error code 26. No data for given selection.
Thanks in advacne.
Aakash.HI Ravi,
I didnt get you.
What to check in XI and what status you want to know of ECC.
We have ECC 6.0. All mappings done in XI.
my problme is when i run transaction ME84, it is not creating any Idoc for DELINS.
Can you tell me how to get it done? -
Scheduling agreement from MM to SUS
Dear Experts,
I have implemented plan driven procurement with supplier integration,when i try to transfer scheduling agreement from MM to SUS , it does get transfer to XI then XI is able to send the XML to SUS system.
When I check the SXMB_MONI for the XML status in SUS,
System give me this message: No implementing class registered for the interface (ABAP interface, request message DeliveryScheduleNotification_In, request message, namespace http://sap.com/xi/SCMBasis/Global)
Can anyone please suggest if there is any specific config required or missing for scheduling agreement transfer to SUS.
Thanks,
-Devi Swain
Edited by: DEVI NANDAN SWAIN on Apr 15, 2010 9:34 PM
Edited by: DEVI NANDAN SWAIN on Apr 15, 2010 9:42 PMResolved..
-
MM-SUS for the extended classic scenario
Hi,
I have done SUS-MM for the classic scenario.
Did anyone implement SUS-MM for the extended classic scenario ?
Did you face any problem or will it be same as 'classic' scenario ?
Please help
Thanks
PranavThere shouldn't be any problem especially when the scenarios are concerned. Since the PO's moves from MM-SUS.
Regards, IA -
SCHEDULING AGREEMENT AS FOLLOW-ON DOCUMENT
Hello,
I have an SRM rel 4.0. integrated with R/3.
I have implemented a Plan driven procurement scenarious with auctions and Bid invitations.
I would like to know if is it possible generate, as follow on document a Scheduling Agreement instead of a Contract.
Thank you.
SimoneHi Simone,
This is very much possible if you have SUS component in place.
You will get all the details on configuration and scenario overview and all other required details.
http://help.sap.com/bp_hightechv1600/HighTech_DE/html/SRM/S61_EN_DE.htm
regards,nishant
Reward full point if this helps. -
Scheduling agreement from ECC 6.0 to SRM EBP 5.0
Hi experts
is there a way to send from ECC 6.0 to SRM EBP 5.0 all the kinds of scheduling agreements?
thanks
regards
andreaHi Andrea,
It is not possible to send Scheduling agreements from ECC to EBP.Same is the case with contracts.
You can only upload backend contracts to SRM. Using GOA you can create either a contract or a Scheduling agreement in R/3.
As informed by Usman, when you integrate R/3 (MM) with SUS it is possible to send S.As to vendors via SUS.
Hope this makes you more clear.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja -
Unable to do goods receipt in Scheduling agreement
Hi ,
We have a scheduling agreement and a valid schedule line whose delivery date has passed already.
When we try to do a GR , the system does not allow us to do a GR.
I have been told to check that "confirmation control key 0004 has been set up for schedule agreement but there is no vendor confirmation (shipping notification) for the delivery schedule on 22.12.2009.
Could you please create shipping notification firstly, and retest your scenario?"
Can somebody please tell me where to see if the confirmation control key has been assigned to the scheduling agreement.
ThanksHi ,
tHANKS. The problem has been resolved. Did a shiping notification.
regards
Edited by: Vinayak Venkatesh on Jan 13, 2010 8:59 PM
Edited by: Vinayak Venkatesh on Jan 13, 2010 9:00 PM -
List of Issues in Scheduling agreement ??
Hii experts
Cam somebody explain me about the crictical issue in scheduling agreements in MM .
What kind of issues will occur in SAP SA scenario.
Can somebody share their exp on this ...
ThanksPlease check the SA issues in these links:
Scheduling Agreement
Scheduling Agreement
scheduling agreement
Scheduling Agreement -
Closing of scheduling agreement with open quantity
In our scenario
When ever we receive the sales order,
we will convert it into scheduling agreement (VA31),
then converting them into planned orders through (MD02) & (MD16),
these are converted to PRu2019s and the procurement process continues and the material is taken into production through quality and after the processing of these materials to end products(FG).
These are taken into finished goods and we will create sales order (VA01) with reference to the scheduling agreement.
And with reference to the VA01 we make out bound delivery (VL01N) and
with reference to sch. Agreement we make billing document VF01 and create excise invoice for factory sale and send the goods to the customer
Now the problem is
When we receive sale order of 30,000 units and we will make sch. Agreement for 30,000 units.
But after planning, procurement and production we receive the FG of 29,500 only(as per yield 98%) into UR in stores.
Now we will supply the FG to customer through billing.
And now we will go to MD04 and check for the requirements the sale order sch. Agreement is still open and when we want to close that sch. Agreement to remove it from the requirements.
But the system is not allowing us to delete the sch. Agreement and giving a message no.V1748, which you cannot mark, deletion flag of xxxxx sch. Agreement.
We can only close it when we go back to initial sale order and change the quantity to 29,500 and coming back to sch agreement and changing the quantity to 29,500 and then only it is allowing us to mark delete.
Initially it is allowed but now it not allowing me to close without the reverse setting.
Kindly help me in this issue
mln rajuhi
In Scheduling Agreemnt you can maintain the Reason for rejection for closing the SA maintain it item level also by mentioning the reason for rejection and the quantities will not reflect in MD04
regards
Maybe you are looking for
-
MC-q report is not updating the missing Sales Orders, Deliveries andInvoice
Hi Friends, Before setting the configuration of MC-q report I have created some Sales orders, deliveries and Invoices But I want to update the missing above documents in MC-q report sales report. Could you please suggest me how can I update all the
-
Why isn't my IPad 2 volume going In and out? Sometimes the volume squares won't come up and when I have headphones in it doesn't work the volume will work for 1 second amd then boom it's gone again! I've tried updating, restarting, and the mute botto
-
I am trying to install the latest iTunes update using Windows 7. I have tried uninstalling the itunes program an reinstalling but I keep getting this error message "Microsoft.VC80.CRT,type='win32'.version='8#0#50727#4053',publicKey Token='1fc8b3b9a1
-
READ TABLE pointer ...
Hi there. How can I assign an itab to pointer to have possibility to make operations on pointer (not itab)? [ I ] DATA: itab LIKE dbtab OCCURS 0 . field-symbols: <ritab> type any table . field-symbols: <rline> type any . ASSIGN itab TO <ritab> . it's
-
OS X is missing Romanian spellchecker but iOS already has one
I would like to see a spellchecker in OS X for Romanian language, especially that this is already available for iOS.