SUS Vendor block - Help needed
Hi,
We are on SRM 7.0 and have setup MM-SUS scenario with XI as the interface. SRM and SUS are on different clients.
When a vendor is blocked in ECC, I want this same vendor to be with a blocked status in SUS too so that he does not carry out any transactions. In general I want the vendor in SUS to be in sync with the corresponding ECC Vendor.
I have manually run BBPUPDVD in SUS and this works fine i.e. the vendor gets blocked in SUS too.
Pl suggest how this can be automated.
Regards,
Nikhil
Edited by: Pbponikhil on Jan 7, 2011 12:06 PM
Hope it is a program BBPUPDVD and take help from technical resource and massage this program as you expected and schedule it.
I have multiple user IDs on SCN, is it possible to consolidate my IDs and my points?
Yes it is possible. You need to decide which user ID you want to keep, then send an email to [email protected], provide the user ID and ask for the consolidation to be done.
Your blog and forum contributions will all be moved to your single user ID and the points will be consolidated. For the wiki, your points will be brought to your unique user ID but unfortunately, we don't have the ability to move your Wiki contributions to another user ID at this time.
http://www.sdn.sap.com/irj/scn/crphelp
Similar Messages
-
EDI IDOC generation for interface with Vendor software help needed.
EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald -
Oracle Forms - need to update multi-record block - Help needed asap
Hi,
We are using Oracle apps release 11i - Oracle forms 6i.
I have a field "project_start_date" in project_block in a custom form. There is another multi-record block called role_block in the same custom form and it has a field named start_date. Requirement is when ever I make change in the project_start_date in project_block, that should reflect in role_block.start_date. I tried different means and could update only the very first record of the multi-record block - role_block. I need to update all the records in the role_block with the same project_start_date. Used looping and several other methods. But could not achieve. Any help is really appreciated.
Thanks
AkilHi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Application Development in PL/SQL » Forms which you can get more quick response
Regard
Helios -
Vendor blocked (Help required)
Hi Friends,
I want to change one vendor master record. When I go to XK02 to change. It is giving error message Account 123456(Vendor number) is currently blocked by user ABCD(user id)(Message no. F2042). I logged out of the system and again trying the same. No screens are open for that vendor.
Can anybody quickly help me?
Thanks,
Bhairavhi
pls go to t.code sm12 and delete lock entries and try to do the same
Thanks
phaneendra -
Vendor Evaluation - Help Needed
Hello,
We do not have any errors for the vendor evaluation as we are yet to develop the model.
We are trying to get the Automatic scores for Pricing, Quality, Delivery and invoices from ECC to BW.
At the same time we want to use a Web Survey for additional scoring based on Plant
We are not able to find the data sources that can bring the automatic scores especially for Pricing into BW. Also integrating the Web survey scores with the Automatic scoring is not very clear from the configuration documents from SAP. Can you please give me the appropriate information and/or SAP notes pertaining to this development.
Thank you so very much,
LyndaHope it is a program BBPUPDVD and take help from technical resource and massage this program as you expected and schedule it.
I have multiple user IDs on SCN, is it possible to consolidate my IDs and my points?
Yes it is possible. You need to decide which user ID you want to keep, then send an email to [email protected], provide the user ID and ask for the consolidation to be done.
Your blog and forum contributions will all be moved to your single user ID and the points will be consolidated. For the wiki, your points will be brought to your unique user ID but unfortunately, we don't have the ability to move your Wiki contributions to another user ID at this time.
http://www.sdn.sap.com/irj/scn/crphelp -
PO acknowledgement for SUS vendor in MM-SUS scenario?
Dear Experts,
We have SRM 7.01 system with ECC 6.0 enhpk 5 in our client landscape. We have configured classic scenario with MM-SUS in our landscape. Our client wants to have the PO acknowledgement functionality for all SUS vendors.
I have checked and found that SUS portal have standard functionality to confirm the Purchase Orders from MM system. However, we need to configure the few things from MM side to enable the PO acknowledgement by default.
1. Create a confirmation key for PO acknowledgement in MM spro settings.
2. Assign the confirmation key to the SUS vendors in MM side .
Now, there are two questions in the MM side?
1. How can the client easily identify the SUS vendor from MM side (say XK02 or MK02) to maintain the required confirmation control key in the master data?
2. Along with the confirmation control key, the purchase order item for such vendors should also have default checking of the checkbox 'Acknowledgement Required' to enable the SUS vendor to confirm such PO item. How can we default the checkbox in PO item for SUS vendors?
Thanska nd regards,
Ranjan
Ranjan SutradharHi Nikhil/Soumya,
How to proceed with vendor classification to enable the client to easily identify which ECC vendors are SUS vendors to maintain the additional master data settings?
With use of classification, the system will automatically populate the vendor master data with a class say Z_SUS?
Could you please help me how to proceed with the same? is it similar to proceed with material classification?
Actually, the client has over 10,000 suppliers and the client is bringing only 1200 suppliers initially to SUS. I am looking for easier way for the client to identify the SUS vendors from ECC side.
Thanks and regards,
Ranjan
Ranjan Sutradhar -
SRM-SUS Vendor registration BSP enhancement.
Hello Gurus,
Need help on vendor registration screen enhancement on SRM SUS. Its BSP application. How to enhance the BSP application. I need to add almost 20-25 fields in the SRM-SUS Vendor registration process screen. How to achieve this.
Appriciate for the immediate responce.
Thanks,
RamHello Veda,
Do we have an option to edit a specific page form SUS application without the need to create a Z copy of the same. Say I want to provide a new field on SUS PO screen in standard SUS application.
Does system requires an access key for editing this object at Page level or BSP application level ?
I cannot check the same in my system as it asks for normal workbenc request to edit the object.
If you are aware of this access key, please provide some details.
Thanks,
Mridula -
Dear experts,
I currently do not have a system available, therefore I need an answer to a basic question:
Which vendor blocks (Company code, Purchasing or both) do affect the visibility of the vendor in SRM in SRM 7.0 classic scenario?
Appreciate your help.
Cheers, T.Hello Toppika,
Only vendor purchasing blocks (for all purchasing organizations or only selected purchasing organization) are relevant in SRM.
No relation exist in SRM between supplier and company code (R/3 Posting block).
Regards.
Laurent. -
When trying to do a goods receipt, i get a vednor block error message. I have checked the vendor master.. there are no blocks and i also checked the MP02 to see if there were any QI blocks... none. I am thinking this is the QI inf record...
Where else colud I check for a vendor block.
Thanks in advancethanks for the response.
But here is the solution i found out. The po's were created on the MPN part numbers and the vendor in tcode MP02 for this part number was different from the vendor on the PO.
I was checking the blocks on the vendor on the PO, it was the vendor on the MPN number that need to be blocked -
Help needed in using the appropriate Trigger
I have a master detail form.DEPT block is the master block and Employee is Detail block.I need to display the message when user is
trying to enter the ENAME field in the Employee block(detail) when the DEPTNO in the DEPT block(master) is not equal to 10.
Messgae should be displayed when user trying to type the value but not when the user navigates into the ENAME text field.
What is the appropriate trigger that is useful here?
Thanks.
GSRIf the DEPT block is table based in the block's POST-QUERY trigger you can simply set
if :DEPT.DEPTNO !=10 then
set_item_proerty('DEPT.ENAME', insert_allowed, property_false);
set_item_proerty('DEPT.ENAME', update_allowed, property_false);
else
set_item_proerty('DEPT.ENAME', insert_allowed, property_true);
set_item_proerty('DEPT.ENAME', update_allowed, property_true);
end if;if the block is a non-database one then you can put that code in EMPNAME's WHEN-VALIDATE-ITEM trigger
Luca
Don't forget to mark the answer as helpful/correct if it is. please. -
Help needed:Printing HTML file using javax.print
Hi
I am using the following code which i got form the forum for rpinting an HTML file.
The folllowing code is working fine, but the problem is the content of HTML file is not getting printed. I am geeting a blank page with no content. What is the change that is required in the code? ALso is there any simpler way to implement this. Help needed ASAP.
public boolean printHTMLFile(String filename) {
try {
JEditorPane editorPane = new JEditorPane();
editorPane.setEditorKit(new HTMLEditorKit());
//editorPane.setContentType("text/html");
editorPane.setSize(500,500);
String text = getFileContents(filename);
if (text != null) {
editorPane.setText(text);
} else {
return false;
printEditorPane(editorPane);
return true;
} catch (Exception tce) {
tce.printStackTrace();
return false;
public String getFileContents(String filename) {
try {
File file = new File(filename);
BufferedReader br = new BufferedReader(new FileReader(file));
String line;
StringBuffer sb = new StringBuffer();
while ((line = br.readLine()) != null) {
sb.append(line);
br.close();
return sb.toString();
} catch (Exception tce) {
tce.printStackTrace();
return null;
public void printEditorPane(JEditorPane editorPane) {
try {
HTMLPrinter htmlPrinter = new HTMLPrinter();
htmlPrinter.printJEditorPane(editorPane, htmlPrinter.showPrintDialog());
} catch (Exception tce) {
tce.printStackTrace();
* Sets up to easily print HTML documents. It is not necessary to call any of the setter
* methods as they all have default values, they are provided should you wish to change
* any of the default values.
public class HTMLPrinter {
public int DEFAULT_DPI = 72;
public float DEFAULT_PAGE_WIDTH_INCH = 8.5f;
public float DEFAULT_PAGE_HEIGHT_INCH = 11f;
int x = 100;
int y = 80;
GraphicsConfiguration gc;
PrintService[] services;
PrintService defaultService;
DocFlavor flavor;
PrintRequestAttributeSet attributes;
Vector pjlListeners = new Vector();
Vector pjalListeners = new Vector();
Vector psalListeners = new Vector();
public HTMLPrinter() {
gc = null;
attributes = new HashPrintRequestAttributeSet();
flavor = null;
defaultService = PrintServiceLookup.lookupDefaultPrintService();
services = PrintServiceLookup.lookupPrintServices(flavor, attributes);
// do something with the supported docflavors
DocFlavor[] df = defaultService.getSupportedDocFlavors();
for (int i = 0; i < df.length; i++)
System.out.println(df.getMimeType() + " " + df[i].getRepresentationClassName());
// if there is a default service, but no other services
if (defaultService != null && (services == null || services.length == 0)) {
services = new PrintService[1];
services[0] = defaultService;
* Set the GraphicsConfiguration to display the print dialog on.
* @param gc a GraphicsConfiguration object
public void setGraphicsConfiguration(GraphicsConfiguration gc) {
this.gc = gc;
public void setServices(PrintService[] services) {
this.services = services;
public void setDefaultService(PrintService service) {
this.defaultService = service;
public void setDocFlavor(DocFlavor flavor) {
this.flavor = flavor;
public void setPrintRequestAttributes(PrintRequestAttributeSet attributes) {
this.attributes = attributes;
public void setPrintDialogLocation(int x, int y) {
this.x = x;
this.y = y;
public void addPrintJobListener(PrintJobListener pjl) {
pjlListeners.addElement(pjl);
public void removePrintJobListener(PrintJobListener pjl) {
pjlListeners.removeElement(pjl);
public void addPrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.addElement(psal);
public void removePrintServiceAttributeListener(PrintServiceAttributeListener psal) {
psalListeners.removeElement(psal);
public boolean printJEditorPane(JEditorPane jep, PrintService ps) {
if (ps == null || jep == null) {
System.out.println("printJEditorPane: jep or ps is NULL, aborting...");
return false;
// get the root view of the preview pane
View rv = jep.getUI().getRootView(jep);
// get the size of the view (hopefully the total size of the page to be printed
int x = (int) rv.getPreferredSpan(View.X_AXIS);
int y = (int) rv.getPreferredSpan(View.Y_AXIS);
// find out if the print has been set to colour mode
DocPrintJob dpj = ps.createPrintJob();
PrintJobAttributeSet pjas = dpj.getAttributes();
// get the DPI and printable area of the page. use default values if not available
// use this to get the maximum number of pixels on the vertical axis
PrinterResolution pr = (PrinterResolution) pjas.get(PrinterResolution.class);
int dpi;
float pageX, pageY;
if (pr != null)
dpi = pr.getFeedResolution(PrinterResolution.DPI);
else
dpi = DEFAULT_DPI;
MediaPrintableArea mpa = (MediaPrintableArea) pjas.get(MediaPrintableArea.class);
if (mpa != null) {
pageX = mpa.getX(MediaPrintableArea.INCH);
pageY = mpa.getX(MediaPrintableArea.INCH);
} else {
pageX = DEFAULT_PAGE_WIDTH_INCH;
pageY = DEFAULT_PAGE_HEIGHT_INCH;
int pixelsPerPageY = (int) (dpi * pageY);
int pixelsPerPageX = (int) (dpi * pageX);
int minY = Math.max(pixelsPerPageY, y);
// make colour true if the user has selected colour, and the PrintService can support colour
boolean colour = pjas.containsValue(Chromaticity.COLOR);
colour = colour & (ps.getAttribute(ColorSupported.class) == ColorSupported.SUPPORTED);
// create a BufferedImage to draw on
int imgMode;
if (colour)
imgMode = BufferedImage.TYPE_3BYTE_BGR;
else
imgMode = BufferedImage.TYPE_BYTE_GRAY;
BufferedImage img = new BufferedImage(pixelsPerPageX, minY, imgMode);
Graphics myGraphics = img.getGraphics();
myGraphics.setClip(0, 0, pixelsPerPageX, minY);
myGraphics.setColor(Color.WHITE);
myGraphics.fillRect(0, 0, pixelsPerPageX, minY);
java.awt.Rectangle rectangle=new java.awt.Rectangle(0,0,pixelsPerPageX, minY);
// call rootView.paint( myGraphics, rect ) to paint the whole image on myGraphics
rv.paint(myGraphics, rectangle);
try {
// write the image as a JPEG to the ByteArray so it can be printed
Iterator writers = ImageIO.getImageWritersByFormatName("jpeg");
ImageWriter writer = (ImageWriter) writers.next();
// mod: Added the iwparam to create the highest quality image possible
ImageWriteParam iwparam = writer.getDefaultWriteParam();
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT) ;
iwparam.setCompressionQuality(1.0f); // highest quality
ByteArrayOutputStream out = new ByteArrayOutputStream();
ImageOutputStream ios = ImageIO.createImageOutputStream(out);
writer.setOutput(ios);
// get the number of pages we need to print this image
int imageHeight = img.getHeight();
int numberOfPages = (int) Math.ceil(minY / (double) pixelsPerPageY);
// print each page
for (int i = 0; i < numberOfPages; i++) {
int startY = i * pixelsPerPageY;
// get a subimage which is exactly the size of one page
BufferedImage subImg = img.getSubimage(0, startY, pixelsPerPageX, Math.min(y - startY, pixelsPerPageY));
// mod: different .write() method to use the iwparam parameter with highest quality compression
writer.write(null, new IIOImage(subImg, null, null), iwparam);
SimpleDoc sd = new SimpleDoc(out.toByteArray(), DocFlavor.BYTE_ARRAY.JPEG, null);
printDocument(sd, ps);
// reset the ByteArray so we can start the next page
out.reset();
} catch (PrintException e) {
System.out.println("Error printing document.");
e.printStackTrace();
return false;
} catch (IOException e) {
System.out.println("Error creating ImageOutputStream or writing to it.");
e.printStackTrace();
return false;
// uncomment this code and comment out the 'try-catch' block above
// to print to a JFrame instead of to the printer
/* JFrame jf = new JFrame();
PaintableJPanel jp = new PaintableJPanel();
jp.setImage( img );
JScrollPane jsp = new JScrollPane( jp );
jf.getContentPane().add( jsp );
Insets i = jf.getInsets();
jf.setBounds( 0, 0, newX, y );
jf.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
jf.setVisible( true );*/
return true;
* Print the document to the specified PrintService.
* This method cannot tell if the printing was successful. You must register
* a PrintJobListener
* @return false if no PrintService is selected in the dialog, true otherwise
public boolean printDocument(Doc doc, PrintService ps) throws PrintException {
if (ps == null)
return false;
addAllPrintServiceAttributeListeners(ps);
DocPrintJob dpj = ps.createPrintJob();
addAllPrintJobListeners(dpj);
dpj.print(doc, attributes);
return true;
public PrintService showPrintDialog() {
return ServiceUI.printDialog(gc, x, y, services, defaultService, flavor, attributes);
private void addAllPrintServiceAttributeListeners(PrintService ps) {
// add all listeners that are currently added to this object
for (int i = 0; i < psalListeners.size(); i++) {
PrintServiceAttributeListener p = (PrintServiceAttributeListener) psalListeners.get(i);
ps.addPrintServiceAttributeListener(p);
private void addAllPrintJobListeners(DocPrintJob dpj) {
// add all listeners that are currently added to this object
for (int i = 0; i < pjlListeners.size(); i++) {
PrintJobListener p = (PrintJobListener) pjlListeners.get(i);
dpj.addPrintJobListener(p);
// uncomment this also to print to a JFrame instead of a printer
/* protected class PaintableJPanel extends JPanel {
Image img;
protected PaintableJPanel() {
super();
public void setImage( Image i ) {
img = i;
public void paint( Graphics g ) {
g.drawImage( img, 0, 0, this );
Thanks
RamRam,
I have had printing problems too a year and a half ago. I used all printing apis of java and I still find that it is something java lacks. Now basically you can try autosense. To check whether your printer is capable of printing the docflavor use this PrintServiceLookup.lookupPrintServices(flavor, aset); . If it lists the printer then he can print the document otherwise he can't. I guess that is why you get the error.
Regards,
Kevin -
Vendor Blocked for Local Purchase Organization
Hi,
I have checked the vendor details in SRM and ECC. The vendor is not locked in SRM & ECC, still the User is getting the Error message that Vendor Blocked for Local Purchase Organization.
Please suggest.
Regards,
LovkeshHello,
To prevent a shopping cart being created with blocked vendors, you shall
make an implementation in BBP_DOC_CHECK_BADI. This badi is called for
each refresh of ITS screen. Here
Call FM BBP_ITEM_GETDETAIL by supplying IV_DOC_GUID
The FM will return among others a table E_PARTNER.
select the corresponding partner related to E_PARTNER from table BUT000
Check weather the BUT000-XBLCK and E_PARTNER are matching
If yes, Fill ET_MESSAGES with an error message.
I hope this information help.
Thanks and regards,
Gaurav -
Hi,
I have the following requirement here:
The vendor master record will be created descentralized, so I need to create this vendo blocked and after the purchase department (MK01) and the finance departament (FK01) create the data, someone will enter in xk05 t-code and unblock this vendor.
I need a simple solution, only to block the vendor when someone starts to create.
Thanks,
GuizaHI
When you are creating a vendor by mk01 or fk01, in the last screen got to EXTRAS: DELETION FLAG.
Here you can set the deletion indicator at the time of creation.
Regards
Girish -
Standard Vendor IDoc CREMDM04 needs to be triggered from the transactions
The Standard Vendor IDoc CREMDM04 needs to be triggered from the following transactions:
u2022XK01 (Create Vendor)
u2022XK02 (Modify Vendor)
u2022User Exit EXIT_SAPOTM_VEND01 .
The following are some more details:
u2022Receiving System: SAP PI
u2022Sending System: SAP ECC
u2022Direction: Outbound from SAP ECC.
How do we achieve it ??
BR.
Tan
Moderator message: please do more research before asking, show what you have done when posting.
Edited by: Thomas Zloch on Feb 20, 2012Hi,
In Tx. WE42, Select the process code for the corresponding partner and bind your workflow / task inplace of the function module with the process code. Now, this will enable the idoc to get placed in the agents(identified by that workflow)inbox.
But to design the workflow, you`ll have to use tx. swdd and prior to that get some basic understanding of Business Workflow from SAP Library.
Hope the info. is helpful and reward points if so.
Regards -
1941W configuration help needed
Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A 192.168.10.x
Vlan 11 for Cisco _Kamran_BGN 192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting Started with Wireless - View the full discussion
conf t
interface Dot11Radio0
no ssid Cisco_Kamran_BGN
no encryption mode ciphers aes-ccm
exit
interface Dot11Radio1
no encryption mode ciphers aes-ccm
no ssid Cisco_Kamran_A
exit
dot11 ssid Cisco_Kamran_A
vlan 10
dot11 ssid Cisco_Kamran_BGN
vlan 11
exit
interface Dot11Radio0
encryption vlan 11 mode ciphers aes
ssid Cisco_Kamran_BGN
exit
interface dot11radio0.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio 0.11
encapsulation dot1q 11
bridge-group 11
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
exit
interface Dot11Radio1
encryption vlan 10 mode ciphers aes-ccm
ssid Cisco_Kamran_A
interface dot11radio1.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio1.10
encapuslation dot1q 10
bridge-group 10
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home
Maybe you are looking for
-
24" iMac - light visible through case
Soes anyone else have their 24" in a dark room ? At night when my room is pitch black, I can see a light shining through the case. It's NOT the sleep light, and I can see it even when the computer is turned off. The location of the light is immidiate
-
Hi I am facing a problem while releasing transport oif copies. I have created a TC which contains a Workbench request. When I am releasing the request its not getting released. it gives message at bottom of the screen " tp successfully connected" and
-
Command Line Parameters Nightmare!
My issue--and it seems to only be my issue--is with the Command Line Parameters. I have been trying to install iTunes 5.0 for five days now. I have tried everything posted in these forums. Dmitry, thanks for such a great resource; it helped some, but
-
Has anyone used bluetooth to sync an iPhone with a Laptop PC? If possible, how do you do it? My laptop is detecting the device, but not connecting. I already have a bluetooth headset paired iwth iPhone - does it have any affect? How many devices can
-
HT1688 How to hook iPhone to tv
How do I hook my iPhone up to the tv? I bought iPhone digital AV Adapter and a HDMI cord and it claims that my iPhone it's not supported by an iPhone? My iPad2 and iPod will connect to it though? What am I doing wrong? Please help!!!