SUS when SRM is add-on for ECC

Gurus:
Did anyone implemented SAP Supplier Self-Service when you have SRM Add-on in ECC (SRM One Client Scenario)?
Any help is well appreciated.
Regards,
Vijay Alisetty

In a security point of view the production SUS should stay in a independent server. I think that you have to see this with the security team. The vendor's companies are going to do log-on in your SUS system (via web).
Two years ago, analyzing SRM versus SRM add-on SAP told us that materials with MRP are not supported with the add-on so the company decided to do not use the SRM add-on. SAP told us that contract management is not supported also with the add-on.
We did not use the SRM add-on for other motives (MRP). Did you asked SAP his advice using SUS with the add-on.
Hope to help you.
Marta

Similar Messages

  • Vendor Migration issue for SRM as add-on to ECC

    Hello Experts,
    I am working on SRM as add-on to ECC.
    When I am trying to migrate vendors from ECC to SRM using MDS_LOAD_COCKPIT. Within monitor, all queues are 'green' indicating that data has successfully migrated to SRM.
    But when I check vendors in trx- ppomv_bbp, i don't see any vendor being migrated from ECC. Neither the BPs are crated for these vendor masters.
    I have configured all necessary configuration- i.e.
    1) I have carried out necessary settings in tables-
    mdsv_ctrl_opt_a
    crmc_but_call_fu
    v_tbc001
    2) In addition, I have maintained backend Purchase Org in PPOMA_BBP.
    3) I have checked RFC connections, definition of logical systems and
    it seems to be alright.
    Can anybody please guide if I am missing on any config or can point
    me in right direction to investigate??
    At SRM GUI, I tried making a local vendor using 'BBPMAININT' but end up in a short-dump.
    Can you please help?
    Thanks and Regards,
    Amit

    Hi,
    if you problem is still existing, following might be possible solution. Try it.
    Maintain Table BBP_MARKETP_INFO with corresponding Vendorroot ID (ex. VG50000....) that you already created in the PPOCV_BBP trx.
    Hope it helps.
    Regards
    PM

  • General Understanding SRM as Add-On to ECC 6.0

    Since I checked in this forum there is no configuration guide for SRM as Add-On available I have some general problems. Does SRM Add-On as single client installation with ECC 6.0  require replication and download of data objects and do I have to maintain the middleware parameters? If it is like this I understand why tere is no specific configration guide for SRM as Add-On!
    In Detail:
    When I configure SRM as Add-On do I have to replicate objects like product, product category, customizing (UOM), vendor from the backend as in stand alone implementation?
    Do I also have to replicate organizational structure via report from the backend or can I use the organizational structure form the backend directly for the SRM?
    Do I have to download the locations from the backend?
    Rgds.
    Dieter

    Hi
    ECC 5.0 does not come with EBP or SRM. ECC 6.0 (ERP 2005) comes with SRM Server as an add-on. Only self service procurement and supplier enablement scenarios are supported. Not recommended for sourcing scenarios and multi-backend deployment options.
    <u>Please look at http://help.sap.com/erp
    Then click on SAP SRM for ERP.
    you will find very good documentation here.</u>
    <u>Please go through these detailed pointers for more information -></u>
    http://help.sap.com/saphelp_srm50/helpdata/en/43/028c9ce2a35158e10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
    What is hub deployment?
    Re: SRM as ADD On in ECC6.0
    SRM@ERP2005
    Re: SAP SRM - ERP INTEGRATION
    Re: SAP R/3 MM and Electronic external Catalog
    SRM Server as an Add on to ERP 2005
    SRM as an add-on to ERP 2005
    Hope this will definitely help.
    Regards
    - Atul

  • Computer freezes up when trying to add contacts for photo sharing.

    I am using Potoshop Elements 8. I have a short list of contacts for sharing photos from my previous Version 3. However, when I follow the instructions for adding a contact to my list my computer is freezing up forcing me to Cntrl>Alt>Delete.
    Can anyone help?

    can you preview it? -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    If that works fine and you still have problems boot into safe mode and try again
    LN

  • Images not displaying correctly when using crystal add-on for SAP B1

    If you have a jpeg logo which has a graduated colour affect on a crystal report and preview and print it straight from Crystal, the image appears normal but when you run it through the crystal add-on viewer the graduated colour comes out in different coloured blocks and the image is not as well defined.
    Is there a way to stop this from happening?  Is there a setting I can change?
    Thanks,
    Kate

    Hi Kate,
    At this moment I am facing the same problem: I want to display pictures on a quotation lay-out.
    Tomorrow I will take a look at this with a collegue of mine. If we are able to solve this issue I will inform you.
    Kind regards,
    Hendri Wessels

  • MM SUS on SRM one client

    Dear Experts,
    Need your help. 
    We are planning to implement MM SUS on SRM one client.
    I have some questions/ doubts before starting the implementation could you please help me to answer them
    Do we need PI to have a connection between SRM and MM
    because its SRM one client SRM is add-on to ECC I mean on the same server?
       b. Do we need to have separate client to implement SUS and
           SRM as we generally do in case of separate SRM system ?
    Thanks & Regards
    Ankit Jain

    Hi Ankit,
    a, If you are going to use MM-SUS scenario, then XI is a must. Because you will need XI for message exchange for Supplier Self registration,PO Response, ASN, GR , Invoice creation
    b, Yes, it is recommeded to implent SUS in a separate client than SRM.
    Regards,
    Ivy

  • What are the check points when SRM system is up after Basis maintenance

    All,
    When SRM system is down for Basis maintenance example down for Kernal upgrade.
    What are the things we need to check when SRM is back online to ensure that the system functions properly.
    Thanks,
    Ravi

    Build a Desktop Video Editing PC
    -3 price level ideas in http://www.pacifier.com/~jtsmith/ADOBE.HTM
    -what PC to build http://forums.adobe.com/thread/947698
    -2 how to build videos http://forums.adobe.com/thread/1104182
    -another video http://forums.adobe.com/thread/1145366
    -planning & Building http://ppbm7.com/index.php/intro-part-1
    -memory for LGA2011 http://forums.adobe.com/thread/1098759
    -an Adobe FAQ http://forums.adobe.com/thread/878520
    -http://www.shawnlam.ca/2012/premiere-pro-cs6-video-editing-computer-build/
    -http://www.videoguys.com/Guide/E/Videoguys+DIY9+Its+Time+for+Sandy+Bridge+E/0xe9b142f408a2 b03ab88144a434e88de7.aspx
    -several more links http://forums.adobe.com/thread/815798
    -build tuning http://ppbm7.com/index.php/final-results

  • SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?

    Hello experts,
    i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
    Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
    Or do we have to use different clients on the system like for SUS?
    I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
    SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
    Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
    I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
    Best regards,
    PATRICK

    Thanks for your reply. I've checked the offline documentation because i've no access to solman.
    There is a document which describes the steps for configuring one-client customizing on marketplace.
    Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
    The problem is that its impossible to cofigure the system like it's described in the document.
    Let me explain why...
    SRM Addon is installed and customizing is done in client 001 (same client as erp)
    overview about defined logical systems:
    -ONECLNTERP (for ERP is defined)
    -ONECLNTEBP (for SRM is defined)
    When I try to assign the logical system to client 001 it works for the first entry
    for the second log. system it shows up an error message.
    -->I assume because client 001 has been already assigned. I cant use client 001 again.
    But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
    Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
    Am I right? Do I have to use two Clients on One System for proper Customizing?
    Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
    I'm totally confused. Any help would be appreciated  - any tips/hints/experiences from someone who has customized One-Client?
    BR, Patrick

  • SRM 5.0 as an Add on with ECC 6.0

    Even i have the same question on how we would manage the distibution model when the SRM System is installed as an add on with ECC. Since being on the same client here are some of the Questions. I have also opened a new thread on this.
    1.) How would the distribution model be distributed when on the same client?
    2.) How would the Documents flow between two different systems?
    3.) In an SUS-MM scenario, how would this be handled when installed on the same client?
    4.) How would material and vendor replication facilitated?
    Any thoughts would be highly appreciated !!
    Thanks,
    Sundeep

    Hi Sundeep,
    I have answered for vendor replication here :
    One Client Solution
    For product category, material and material type replication, this is same process through activation of relevant objects in table mdsv_ctrl_opt_a
    Then you have to trigger the replication through mds_load_cockpit
    For SUS, you have to select SUS_ONE (instead of EBP_ONE) in table bbp_backend_dest
    That all what i know so far
    Kind regards,
    Yann

  • Logical systems assignment when SRM and ECC are on 2 different servers

    Hi SRM guru's,
    What is the standard practice for Logical system creation and assignment when  ECC and SRM are on 2 different servers.
    I could not able to find which i created a logical system  in SRM server which i created in ECC
    Same for the ECC also.
    how do i assign logical system of SRM to ECC
    vice versa.
    your prompt response is appreciated.
    Regards

    Hi Sai,
    Logical System Naming/Creation procedure is not dependent on the servers but it is just a logical representation of a system.
    As you are trying to name logical systems for ECC & SRM, please follow the below procedure which is usually recommeded by SAP and followed.
    Logical System : <SID>CLNT<Client Number>
    For Example if you have a client 300 in system DE0 (also called SID), the logical system name will be DE0CLNT300. And it will be same for SRM system.
    You can refer the below document which eplains the creation of logical system and RFC destinations etc
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    Note: Only while configuring the RFC Destination, the servers will play a crucial role.
    Regards
    Kathirvel

  • SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server

    Hi
    Are  there any limitations if we go with SAP SRM 5.5 Server as an add-on on ECC 6.0 compared to Implementation of SAP SRM 5.5 server on its own.
    FYI-We just have one ERP Back-end system.
    BTW, what is the difference between SAP SRM server 5.5 vs SAP SRM server 5.5 Plus.
    Thanks in advance.
    Thanks & Regards,
    Anji

    Hi
    Summary:
    You can use classic scenario in Add-on.
    You can use self-service procurement and SUS in Add-on.
    You cannot have Sourcing and other scenarios.
    No migration from Add-on to Separate server available.
    Best regards
    Ramki

  • SRM as an Add on to ECC

    Hi All,
    Can anybody please forward me the presentation for SRM as an Add on to ECC
    6.0. Also please provide any other presentations giving overview of SRM activities
    and configuration steps.
    Regards,
    Sourabh

    Closed

  • Java Add-in for AS ABAP ERP ECC 6.0 non-unicode

    Hi all,
    I have a AS ABAP ECC 6.0 NON-UNICODE system and i need to install Java add-in to the system without doing unicode conversion. The problem is that when i go to SAPinst:
    Start SAPinst [page 90].
    2. On the Welcome screen, choose <SAP system> Additional Software Life-Cycle Tasks Java Add-In for
    ABAP <database> <system variant>
    I have to use UC-Kernel even though my system is Non-unicode.
    Is it mandatory to convert to unicode to be able to install Java add-in. I am doing this installation so i can configure Adobe Interactive Forms in the system.
    All help will be apprieciated!!

    The J2EE instance will always be unicode.  The installation process should create an addiitional subdirectory, 'uc', under the existing kernel path to store the unicode kernel.  We have been through this process and OSS note 669902 describes additional settings that are needed for a non-Unicode ABAP instance being combined with Unicode J2EE add-on.  You will need to maintain both kernel versions going forward.

  • Order Change Mappping Missing for ECC SRM Integration

    Hello XI Experts,
    We are using  ECC-XI-SRM SUS for PDP scenarion.
    We have uploaded the contents and find that no message mapping program exists for Order Change -- that is ORDCHG.ORDERS02 idoc to SRM.
    However there is a Interface mapping but it refers to the same mapping program as that for Order Create -- ORDERS.ORDERS02 to SRM.
    Can You please let us know , if you faced this as well or not ... and what should be our course of action now.
    Thanks,
    Mani

    Anand ,
    can you let us know one more thing..
    For ECC-XI-SRM integration all the conents are readymade...
    What else do we need to consider... like Alert config etc?
    Cheers,
    Himadri

  • Advantages and disadvantages for SRM on one client with ECC

    Dear SAP gurus,
    We are evaluating the use of SRM on one client with ECC. Is there a paper spesifally discuss the advantage and disadvantages of having this deployment option?
    Best regards,
    John

    Hi
    check this  link
    SRM Server as an Add on to ERP 2005
    Advantages
    1) one backend for SRM and ECC6.0
    Disadvantage
    1.Sourcing scenario cannot be implemented.
    2.It does not support multiple backend system.
    Regards
    G.Ganesh Kumar

Maybe you are looking for

  • Update error!!!

    why all my songs and video had been erased after updating my ipod? it displayed an error message when im trying to update.. the second time after i remove my ipod and reset it. i updated once again, and it goes fine. but my songs and videos are gone.

  • Unable to switch between tools in Photoshop CC.

    Hi, I am seriously about to loose my mind over this problem. I use key commands to speed up my work flow while creating storyboards.  Say I have the brush selected and i want to erase a bit of a line I would switch to the eraser tool just by tapping

  • Attribute mapping not working with complex searches

    Hi all, We are using "attribute mapping" for some attributes and that works fine as far as we don't make a complex search. We are doing the attribute mapping at the Directory proxy 6.3 so we map businessSector to businessUnit. Everything work fine if

  • Error: Common entries are not permitted for plan queries and input queries

    Hi, I have a 2 selections in the column struct: 1. year = 2005, version = actual 2. year = 2006, version = plan, marked as data can be changed using user entry or planning function row has posting periods from 1-12 in the workbook I have inserted thi

  • Barcodes in form guides

    Hi! I have a problem with using Barcodes added with Livecycle Designer in Workspace ES. The Barcode works great in preview and also with adobe reader and adobe acrobat, but when i add a form guide to the pdf and try to show it in Workspace ES I get a