Suse 9 oracle 10g installation DHCP-assigned public IP addresses problem
Hi,
I got below error when I have tried to install Oracle 10gR2.
I have checked # hostname, it is Ok. I setup network to use static Ip.
I checked /etc/hosts. Does oracle get hostname another file?
How can I solve my problem.
Thanks.
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses. However, the primary network
interface on the system should be configured with a static IP
address in order for the Oracle Software to function properly.
See the Installation Guide for more details on installing the
software on systems configured with DHCP.
Hostname command should return the fully qualified hostname as shown below:
% hostname
hostname.domainname
Similar Messages
-
Error while Oracle 10g Installation suse linux
Hi,
All i am facing issue while installing Oracle 10g release 2 on open suse.
All test are getting passed but getting a error reltated to ip address as follows.
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.31.215.64
INFO: Checking the network interface display name.... :eth0
INFO: Checking the network reference name..... :eth0
INFO: Checking the platform .......46
INFO: Checking the LINUX vendor .... :SuSE
INFO: Check complete. The overall result of this check is: Not executed <<<<
Also while installing getting error as,
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public
IP addresses. However, the primary network interface on the system should be
configured with a static IP address in order for the Oracle Software to function
properly. See the Installation Guide for more details on installing the software
on systems configured with DHCP.
Please help me to resolve issue.
BR,
Rajesh
Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AMHi,
I tried to follow each step of oracle documentation but network configuration requirement is failing.
please find following log.
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9
Actual Result: SuSE-9
Check complete. The overall result of this check is: Passed
=======================================================================
Checking operating system package requirements ...
Checking for make-3.79; found make-3.81-128.14. Passed
Checking for binutils-2.14; found binutils-2.19.51-10.26.4. Passed
Checking for gcc-3.2; found gcc-4.4-4.2. Passed
Checking for libaio-0.3.96; found libaio-0.3.104-144.2. Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking kernel parameters
Checking for semmsl=250; found semmsl=1250. Passed
Checking for semmns=32000; found semmns=32000. Passed
Checking for semopm=100; found semopm=100. Passed
Checking for semmni=128; found semmni=256. Passed
Checking for shmmax=536870912; found shmmax=3294967296. Passed
Checking for shmmni=4096; found shmmni=4096. Passed
Checking for shmall=2097152; found shmall=2097152. Passed
Checking for file-max=65536; found file-max=131072. Passed
Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop. Passed
Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
Checking for rmem_default=262144; found rmem_default=4194304. Passed
Checking for rmem_max=262144; found rmem_max=4194304. Passed
Checking for wmem_default=262144; found wmem_default=262144. Passed
Checking for wmem_max=262144; found wmem_max=262144. Passed
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Recommended glibc version
Expected result: ATLEAST=2.3.3-98.28
Actual Result: 2.10.1-10.4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 5460MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking available swap space requirements ...
Expected result: 5460MB
Actual Result: 10244MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Please suggest how to resolve. -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g installation on Windows 7
I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJPossible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops. -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
Error encounded during oracle 10g installation on mac os 10x
Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
VijayaprakashDuplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini -
OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to meOracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin -
Is Oracle AS part of Oracle 10g installation?
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regards972145 wrote:
I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
I hope, my question is clear.
Please revert with the reply to my query.
Regardsno Oracle Application Server is NOT included with DB installation -
Error in Oracle 10g Installation windows 2000 advance server
Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafiSolution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again. -
While Installing Oracle 10g, I get the following warning
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
========================================================
When I ignored this warning and proceeded with the installation tnsnames.ora was not getting created.
Please help on this.Hi,
You need to configure the Loop Back Adapter on your system, Since ORACLE does not support the dynamic IP Address. Do the Loop Adapater the Problem will be solved.
Refer :-
http://youngcow.net/doc/oracle10g/install.102/b14316/reqs.htm#BABGCEAI
Check for "Installing a Loopback Adapter"
- Pavan Kumar N -
Oracle 10g Installation: JVM Crashes in Net Configuration Assistant
Hi,
I'm trying to install Oracle 10g (10.2.0.1) in Windows 2003 server, Installation goes fine, JVM crashes at the time of configuring, "Network Conf Assistant", Can any one help me out here.... Have given the JVM dump for your reference...
Thanks in Advance....
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x626DB080
Function=Java_oracle_net_common_jlsnrctl_executeCommand+0x9150
Library=E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
Current Java thread:
at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
at oracle.net.ca.ConfigureProfile.typicalConfigure(Unknown Source)
at oracle.net.ca.NetCA.typicalConfigureServer(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x00400000 - 0x0040B000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.exe
0x7C800000 - 0x7C8C0000 E:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F42000 E:\WINDOWS\system32\kernel32.dll
0x77F50000 - 0x77FEC000 E:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CEF000 E:\WINDOWS\system32\RPCRT4.dll
0x77BA0000 - 0x77BFA000 E:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\client\jvm.dll
0x77380000 - 0x77412000 E:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C48000 E:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACD000 E:\WINDOWS\system32\WINMM.dll
0x71BC0000 - 0x71BC8000 E:\WINDOWS\system32\rdpsnd.dll
0x771F0000 - 0x77201000 E:\WINDOWS\system32\WINSTA.dll
0x71C40000 - 0x71C98000 E:\WINDOWS\system32\NETAPI32.dll
0x76B70000 - 0x76B7B000 E:\WINDOWS\system32\PSAPI.DLL
0x10000000 - 0x10007000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\hpi.dll
0x76F50000 - 0x76F63000 E:\WINDOWS\system32\Secur32.dll
0x00380000 - 0x0038E000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\verify.dll
0x00390000 - 0x003A9000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\java.dll
0x003C0000 - 0x003CE000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\zip.dll
0x03270000 - 0x03382000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\awt.dll
0x73070000 - 0x73097000 E:\WINDOWS\system32\WINSPOOL.DRV
0x76290000 - 0x762AD000 E:\WINDOWS\system32\IMM32.dll
0x77670000 - 0x777A4000 E:\WINDOWS\system32\ole32.dll
0x03490000 - 0x034E1000 E:\oracle\product\10.2.0\db_1\jdk\jre\bin\fontmanager.dll
0x626D0000 - 0x626E5000 E:\oracle\product\10.2.0\db_1\BIN\oranjni10.dll
0x62740000 - 0x6277D000 E:\oracle\product\10.2.0\db_1\bin\oranl10.dll
0x60960000 - 0x60A6D000 E:\oracle\product\10.2.0\db_1\bin\oran10.dll
0x62670000 - 0x6268B000 E:\oracle\product\10.2.0\db_1\bin\orancrypt10.dll
0x60870000 - 0x60953000 E:\oracle\product\10.2.0\db_1\bin\oracore10.dll
0x60A80000 - 0x60B44000 E:\oracle\product\10.2.0\db_1\bin\oranls10.dll
0x63690000 - 0x636A8000 E:\oracle\product\10.2.0\db_1\bin\oraunls10.dll
0x7C340000 - 0x7C396000 E:\WINDOWS\system32\MSVCR71.dll
0x60EB0000 - 0x60EB7000 E:\oracle\product\10.2.0\db_1\bin\orauts.dll
0x71C00000 - 0x71C17000 E:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000 E:\WINDOWS\system32\WS2HELP.dll
0x62920000 - 0x6296C000 E:\oracle\product\10.2.0\db_1\bin\oranro10.dll
0x62530000 - 0x62583000 E:\oracle\product\10.2.0\db_1\bin\oraldapclnt10.dll
0x627F0000 - 0x628F9000 E:\oracle\product\10.2.0\db_1\bin\orannzsbb10.dll
0x60300000 - 0x60857000 E:\oracle\product\10.2.0\db_1\bin\orageneric10.dll
0x63430000 - 0x63457000 E:\oracle\product\10.2.0\db_1\bin\orasnls10.dll
0x60FA0000 - 0x61092000 E:\oracle\product\10.2.0\db_1\bin\oracommon10.dll
0x61C20000 - 0x61E72000 E:\oracle\product\10.2.0\db_1\bin\oraclient10.dll
0x636B0000 - 0x636B6000 E:\oracle\product\10.2.0\db_1\bin\oravsn10.dll
0x60B50000 - 0x60EA8000 E:\oracle\product\10.2.0\db_1\bin\orapls10.dll
0x034F0000 - 0x034F9000 E:\oracle\product\10.2.0\db_1\bin\oraslax10.dll
0x63080000 - 0x63284000 E:\oracle\product\10.2.0\db_1\bin\oraplp10.dll
0x03500000 - 0x0359A000 E:\oracle\product\10.2.0\db_1\bin\orasql10.dll
0x035A0000 - 0x03700000 E:\oracle\product\10.2.0\db_1\bin\oraxml10.dll
0x60020000 - 0x60030000 E:\WINDOWS\system32\MSVCIRT.dll
0x62980000 - 0x62990000 E:\oracle\product\10.2.0\db_1\bin\orantcp10.dll
0x61ED0000 - 0x61F5B000 E:\oracle\product\10.2.0\db_1\bin\orahasgen10.dll
0x62AB0000 - 0x62B1A000 E:\oracle\product\10.2.0\db_1\bin\oraocr10.dll
0x62B20000 - 0x62B60000 E:\oracle\product\10.2.0\db_1\bin\oraocrb10.dll
0x71BB0000 - 0x71BB9000 E:\WINDOWS\system32\WSOCK32.dll
0x62790000 - 0x627A7000 E:\oracle\product\10.2.0\db_1\bin\oranldap10.dll
0x77D00000 - 0x77D8C000 E:\WINDOWS\system32\OLEAUT32.dll
0x626B0000 - 0x626B7000 E:\oracle\product\10.2.0\db_1\bin\oranhost10.dll
0x62660000 - 0x62666000 E:\oracle\product\10.2.0\db_1\bin\orancds10.dll
0x629C0000 - 0x629C8000 E:\oracle\product\10.2.0\db_1\bin\orantns10.dll
0x03860000 - 0x03868000 E:\oracle\product\10.2.0\db_1\BIN\orawsec10.dll
0x635D0000 - 0x635E9000 E:\oracle\product\10.2.0\db_1\BIN\orasrvm10.dll
0x77B90000 - 0x77B98000 E:\WINDOWS\system32\VERSION.dll
0x62590000 - 0x625DE000 E:\oracle\product\10.2.0\db_1\BIN\oraldapjclnt10.dll
0x76C10000 - 0x76C39000 E:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D628000 E:\WINDOWS\system32\dbghelp.dll
Heap at VM Abort:
Heap
def new generation total 576K, used 567K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 99% used [0x10010000, 0x1008fa20, 0x10090000)
from space 64K, 88% used [0x100a0000, 0x100ae298, 0x100b0000)
to space 64K, 0% used [0x10090000, 0x10090000, 0x100a0000)
tenured generation total 1408K, used 628K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 44% used [0x104f0000, 0x1058d398, 0x1058d400, 0x10650000)
compacting perm gen total 5120K, used 4967K [0x14010000, 0x14510000, 0x18010000)
the space 5120K, 97% used [0x14010000, 0x144e9eb0, 0x144ea000, 0x14510000)
Local Time = Sun Oct 16 09:26:38 2005
Elapsed Time = 4
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid2820.log.
# Please refer to the file for further information.
Configuration assistant "Oracle Net Configuration Assistant" failed
The "E:\oracle\product\10.2.0\db_1\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------No Srini,
I opted to create a starter database as part of the installation.
The error occurs "during installation" while trying to do the database configurations.
(I did try once without installing and configuring the Loopback adapter (With and without plugging into the network).
Later I read some of the problems with DHCP and installed/configured the Loopback adapter.
Then tried Installing Oracle 11gR2 (With and without plugging into the network)
But end up getting stuck at the same Net Configuration Assistant failure).
Any advise ?
By the way, thanks for the support.
San. -
Oracle 10g installation ora 12154 i really need help anyone
history: reinstallation, can't pass ora 12154; system windows xp sp2 problem ora 12154
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me
Edited by: oraclehelper on May 20, 2009 1:45 AMDestination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me -
Oracle 10g Installation ./runInstaller Issue
I have RHEL 5 64 bit OS installed Oracle 10g Release 10.2.0.1.0
at end of oracle installation there is one error.
ERROR
OUI-10058: The OUI Inventory on this system does not exits or is not writable .
1-The /opt/oracle/oraInventory/orainstRoot.sh script was not executed with root privileges,
or an error occurred during execution;
2-You are not a member of the specified installer gourp
So i run
cd /u01/app/oracle/oraInventory/
./orainstRoot.sh
Changing permissions of /u01/app/oracle/oraInventory to 770.
Changing groupname of /u01/app/oracle/oraInventory to oinstall.
The execution of the script is complete
And i am running version upgrade package p6810189_10204_Linux-x86-64.
cd /u01/Disk1/
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /u01/app/oracle/tmp/OraInstall2010-07-28_12-49-50PM/installActions2010-07-28_12-49-50PM.log
but it fail to install :)
Please export guide me to solve the issue.
Thanks for all your expertise ;o)
Edited by: Oracle DBA P on Jul 28, 2010 5:16 AMthanks buddy
./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /u01/app/oracle/tmp/OraInstall2010-07-28_01-40-35PM. Please wait ...
installer started and it installing now but still it through Failed <<<< error
Edited by: Oracle DBA P on Jul 28, 2010 5:45 AM
Edited by: Oracle DBA P on Jul 28, 2010 5:45 AM -
OracleAS 10g Installation Problem on RedHat AS 3.0
Hi
I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
I think something is wrong here.
a free trial version with a commercial patch !!!
can any one please help me out.
regards yashardear fredrik
I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
please notify about any solution that you think might help me solving this problem. I am in a hurry
regards yashar
Maybe you are looking for
-
HR analytics not showing all Org id
All, BIAPPS : 795 EBS : 11510 The HR Organization Initiallization query is not working properly. It is returning the correct organization for some HR users but not for others. For example for some of our super HR users it is not returning any organiz
-
Why does Firefox show a red screen briefly on startup?
Whenever I start Firefox on my laptop, it briefly shows a red screen before heading to my home page. Is this normal for the browser now or should I be looking at my hardware rather than the software?
-
How to get isight camera to work in windows live messenger
I'm on macbook using VMWare Fusion software, I have split HD into windows XP and Mac side. I'm trying to connect on windows side with my brother who has PC using the windows live messenger. I can't find out how to get my mac isight camera to work in
-
Can I install iOS 5 with Win XP?
I know that I need Windows Vista or 7 on my desktop in order for it to be able to be compatible with iCloud, but can I still download/install iOS 5 on my ipad/iphone using a Windows XP desktop?
-
Just to make things easy I created a video and uploaded it to youtube demonstrating the bugs I'm experiencing. So instead of writing a long, confusing post you can see for yourself the exact issues I'm having. To briefly sum it up: iTunes Radio doesn