Suse11.2 SAP ERP6 INSTALL ./sapinst do not start

hi guys
i have done jdk install and /etc/profile work. and ip and hostname in /etc/hosts, export DISPLAY=IP:0.0,xhost. all are done !
but still ./sapinst do not start!!!
Starting GUIServer using:
SAPinst port         : pipe:5:8
GUIServer port       : 21212
GUI autostart        : on
GUI mode             : normal
command       : /usr/java/j2sdk1.4.2_19/bin/java -Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.20600.1392479296/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8
load resource pool /sapinst/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host linux-0sa1, port 21212 to continue with the installation
The process that should run the SAPinst GUI could not be started. Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root directory of your Java installation. As an alternative you may start the GUI on another host (for details please consult the installation guide).
Java has been started with the following command line:
-Xmx256M -Dsap.env.var.javahome=SAPINST_JRE_HOME -cp /tmp/sapinst_exe.20600.1392479296/JAR/instgui.jar SDTServer rootdir=/root/.sdtgui config=jar:sdtserver.xml guiport=21212 httpport=4239 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:5:8

Dear Beny,
Already SUSI Linux having JAVA.
Please check echo $SAPINST_JRE_HOME
above path which java binaries located and if required set this environment to correct java version as per installation guide and also check $PATH...
Thanks & Regards,
V Srinivasan

Similar Messages

Suse11.2 SAP ERP6 INSTALL import ABAP blank screen

hi ,guys
when i used suse11.2 for sap to install erp6 ehp5 in kvm(like local install) and go to import ABAP step, the KVM suddenlly become blank screen.
ps - ls show sapinst. what is the wrong?

Dear Beny,
This issue happen for less memory.
Check running processes using below command.
ps aux | less
Check sapinst is running or not.
Show All Running Processes in Linux
Thanks & Regards,
V Srinivasan

Suse11.2 SAP ERP6 ehp5 java version

hi, guys
whats the java version of suse11.2 SAP ERP6 ehp5
thanks

ah! my mistake, You no longer have to download and install a Java Development Kit (JDK) from another software vendor as a prerequisite for the installation.
I think page 11 https://websmp110.sap-ag.de/~sapidb/011000358700001414082012E
FYI - you need to use the SAP NetWeaver server installation guides (ABAP or Java versions)
in parallel to the Installation Guide for SAP ERP 6.0 Including Enhancement Package 6 ABAP and Java

SAP R/3 Installation : Dispatcher not starting up.

Hi,
 I'm trying to Install SAP R/3 Enterprise ABAP on Windows: Oracle. Central Instance, Database Instance & Gateway Instance Installation went smoothly without any problems.
 But when I tried to start the SAP system the Dispatcher is not starting.
 I'm getting following error which is listed below from various files like dev_wx, dev_ms, stderrx & dev_rfc.
dev_rfc.trc file
>TS> Fri Jun 03 14:02:41 2005
T:5268 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.C01, GWHOST=wipro, GWSERV=3300
ERROR partner not reached (host 10.119.2.66, service 3300)
TIME Fri Jun 03 14:02:41 2005
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
dev_ms file
[Thr 5884] Fri Jun 03 17:51:27 2005
[Thr 5884] systemid 560 (PC with Windows NT)
[Thr 5884] relno 6400
[Thr 5884] patchlevel 0
[Thr 5884] patchno 12
[Thr 5884] intno 20020600
[Thr 5884] pid 5816
[Thr 5884] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5816) [msxxserv.c 1655]
[Thr 5884] MsHttpInit: full qualified hostname = wipro.hobbits
[Thr 5884] HTTP logging is switch off
[Thr 5884] set HTTP state to LISTEN
[Thr 5884] MsHttpOwnDomain: own domain[1] = hobbits
[Thr 5884] *** I listen to port sapmsC01 (3601) ***
[Thr 5884] *** HTTP port 8101 state LISTEN ***
[Thr 5884] CUSTOMER KEY: >P1811225457<
[Thr 5884] Fri Jun 03 17:51:47 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:44 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_01 [msxxserv.c 4190]
[Thr 5884] Fri Jun 03 17:52:49 2005
[Thr 5884] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from wipro_C01_00 [msxxserv.c 4190]
[Thr 5884] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 5884] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 9101]
[Thr 5884] *** ERROR => MsSClientHandle: MsSRead C2 (wipro_C01_00), MSEINTERN [msxxserv.c 3765]
[Thr 5884] Fri Jun 03 18:03:09 2005
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C1 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
[Thr 5884] *** ERROR => MsSCheckConnections: no response from client C0 (10.119.2.66) after 300 secs received [msxxserv.c 2913]
[Thr 5884] *** ERROR => MsSCheckConnections: disconnect now [10.119.2.66] [msxxserv.c 2917]
stderr file
stderr2 file
C:\usr\sap\C01\D00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\C01\D00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo startup 1>>v9start.sql
C:\usr\sap\C01\D00\work>echo exit 1>>v9start.sql
SQL*Plus: Release 9.2.0.5.0 - Production on Fri Jun 3 17:51:27 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORA-01081: cannot start already-running ORACLE - shut it down first
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
stderr4
work process W0 died => tskh_init: db_connect
work process W3 died => tskh_init: db_connect
work process W4 died => tskh_init: db_connect
work process W5 died => tskh_init: db_connect
work process W6 died => tskh_init: db_connect
work process W7 died => tskh_init: db_connect
work process W2 died => tskh_init: db_connect
work process W1 died => tskh_init: db_connect
ICM up and operational (pid: 4100) ***
Shutdown ICM server ......
ICM shutdown completed (pid: 4100) ***
DISPATCHER EMERGENCY SHUTDOWN => DpWPCheck: no more work processes
stderr6
[Thr 3668] Fri Jun 03 17:51:27 2005
[Thr 3668] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3668] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 4144] Fri Jun 03 17:51:28 2005
[Thr 4144] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 4144] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604][Thr 3680] Fri Jun 03 17:51:28 2005
[Thr 3680] *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
[sncxxdl.0340][Thr 3680] *** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
[sncxxdl.0604]
 From the above log, it says that there is problem in database connection. But I am not able to figure out where the problem lies & what are the changes that needs to be done.
 Kindly suggest me what needs to be done.
Cheers,
Jeetu

Hi Jeetendra
I have the same problem of dsipatcher not starting up, i am using XP as operating system , pinning hope that u have got the solutions for the problem
Here are the below
1)dev_wo
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 19 09:23:41 2005
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:42 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 3660
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3660) [dpxxdisp.c 1016]
I
I Wed Oct 19 09:23:43 2005
I MtxInit: -2 0 0
X
X Wed Oct 19 09:23:44 2005
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 19 09:23:50 2005
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
M
M Wed Oct 19 09:23:55 2005
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\PRD\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_PRD_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 19 09:23:55 2005
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3660) [dpnttool.c 345]
2)stder
C:\usr\sap\PRD\DVEBMGS00\work>echo WHENEVER SQLERROR exit SQL.SQLCODE 1>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo connect / as sysdba 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo startup 1>>v9start.sql
C:\usr\sap\PRD\DVEBMGS00\work>echo exit 1>>v9start.sql
'sqlplus' is not recognized as an internal or external command,
operable program or batch file.
3)dev_rfc
ERROR file opened at 20060207 010848 India Standard , SAP-REL 620,0,252 RFC-VER 3 500897 MT-SL
T:2608 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1360
T:2608 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4)dev_ms
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 2316] Wed Oct 19 09:23:36 2005
[Thr 2316] MsSSetTrcLog: trc logging not active
[Thr 2316] relno 6200
[Thr 2316] patchlevel 0
[Thr 2316] patchno 125
[Thr 2316] intno 20020600
[Thr 2316] pid 2328
[Thr 2316] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2328) [msxxserv.c 1515]
[Thr 2316] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 2316] *** I listen to port sapmsPRD (3600) ***
[Thr 2316] *** HTTP LISTEN ***
[Thr 2316] *** I listen to HTTP port 8100 ***
[Thr 2316] CUSTOMER KEY: >B0642345523<
[Thr 2316] Wed Oct 19 09:24:27 2005
[Thr 2316] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from sap_PRD_00 [msxxserv.c 3957]
[Thr 2492] Wed Oct 19 09:27:02 2005
[Thr 2492] MsSExit: received SIGINT (2)
[Thr 2492] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2328) [msxxserv.c 4786]
5) dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Wed Oct 19 09:23:38 2005
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 226]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 251
intno 20020600
pid 2120
***LOG Q00=> DpSapEnvInit, DPStart (00 2120) [dpxxdisp.c 966]
 shared lib "dw_xml.dll" version 252 successfully loaded
 shared lib "dw_xtc.dll" version 252 successfully loaded
 shared lib "dw_stl.dll" version 252 successfully loaded
MtxInit: -2 0 0
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 268 MB
<ES> 267 blocks reserved for free list.
ES initialized.
Wed Oct 19 09:23:39 2005
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 8832]
Wed Oct 19 09:23:40 2005
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Wed Oct 19 09:23:42 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 940]
DpMsgAdmin: Set patchno for this platform to 251
Release check o.K.
Wed Oct 19 09:24:21 2005
ERROR => W0 (pid 3660) died [dpxxdisp.c 11210]
ERROR => W1 (pid 3728) died [dpxxdisp.c 11210]
ERROR => W2 (pid 3716) died [dpxxdisp.c 11210]
ERROR => W3 (pid 4048) died [dpxxdisp.c 11210]
ERROR => W4 (pid 3704) died [dpxxdisp.c 11210]
ERROR => W5 (pid 3700) died [dpxxdisp.c 11210]
ERROR => W6 (pid 3684) died [dpxxdisp.c 11210]
ERROR => W7 (pid 3692) died [dpxxdisp.c 11210]
ERROR => W8 (pid 3896) died [dpxxdisp.c 11210]
ERROR => W9 (pid 3672) died [dpxxdisp.c 11210]
ERROR => W10 (pid 2620) died [dpxxdisp.c 11210]
ERROR => W11 (pid 3628) died [dpxxdisp.c 11210]
ERROR => W12 (pid 3620) died [dpxxdisp.c 11210]
ERROR => W13 (pid 3580) died [dpxxdisp.c 11210]
ERROR => W14 (pid 3612) died [dpxxdisp.c 11210]
ERROR => W15 (pid 380) died [dpxxdisp.c 11210]
ERROR => W16 (pid 3624) died [dpxxdisp.c 11210]
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
ERROR => DpMBufRead: state MBUF_PREPARED, opmode MBUF_USE [dpxxmbuf.c 503]
ERROR => DpModState: DpMBufRead failed (-1) [dpxxdisp.c 13129]
Wed Oct 19 09:24:27 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9058]
MBUF state OFF
MBUF component DOWN
Wed Oct 19 09:24:28 2005
***LOG Q05=> DpHalt, DPStop ( 2120) [dpxxdisp.c 7637]
kindly help me to solve and able to connect to server
and please let me know step by step solutions as i am very much new
Thanking you my emial id ([email protected])

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

After Fresh Install CMS does not start

Hello BO Gurus,
I have got a blank Installation of BO 4.0.
At Install CMS does not start.
I have got a:
- BO 4.0
-Windows 7 Server Enterprise, SP1
Trace shows:
....Server MSMYSERVER3:6400 ... was not found or is possibny down.... (FWM 01003) Connection refused: connect
...Is the CMS alive? Ensure the CMS supports SDK version 1400
How to start CMS ?
Which Username to take to start CMS ?
What is SDK version 1400 + ?
Where to get SDK version 1400 + ?
Thank You !
Best Wishes
Martin

Could also be a database connection issue.
What database are you running?
We've had an issue where the database (MSSQL) was hosted on a seperate server and where Windows Authentication was used. To resolve the issue, we had to change the Server Intelligence Agent (SIA) service to start with the Windows/domain account.
Regards,
CJ

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

RAM INSTALLED BUT COMPUTER NOT STARTED

RESPECTED SIR,
I HAVE G6-2312AX HP PAVILION NOTEBOOK /LAPTOP. WINDOWS 8 INSTALLED IN IT. 4GB RAM ALREADY THERE. NOW I WANT TO ADD 4GB MORE. I PURCHASED 4GB DDR3 1600MHZ RAM AND TRIED TO INSTALL IT. BUT COMPUTER NOT STARTING. KINDLY TELL WHAT TO DO. JAI HIND
This question was solved.
View Solution.

It sounds as if you did not put in a pair of identical memory modules or did not use guaranteed compatible memry modules. You can't use the module that was already there unless the one you are adding is identical in all respects.
Only use guaranteed modules in identical pairs if you want your memory upgrade to work right the first time.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

New install lightdm does not start

I've installed arch and not much past that point. After troubles with lightdm I installed gnome and used 'systemctl enable gdm' and gdm worked after my reboot. Anyway, more info on my lightdm problem.
Steps to install
pacman -S lightdm
pacman -S lightdm-gtk3-greeter
systemctl enable lightdm
reboot
Upon reboot screen flashes a couple of times and then stops.
I had installed xfce4 prior to this and made sure the xfce4.desktop file existed. I've looked up other posts and I have not had look implementing their solutions. Any ideas?
DEBUG: Started session 395 with service 'lightdm-greeter', username 'lightdm'
DEBUG: Session 395 authentication complete with return value 0: Success
DEBUG: Greeter authorized
DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
DEBUG: Session 395 running command /usr/bin/lightdm-gtk-greeter
DEBUG: Greeter closed communication channel
DEBUG: Session 395 exited with return value 1
DEBUG: Greeter quit
DEBUG: Failed to start greeter

My Lightdm stopped working a few days ago after an update.
tschertel wrote:I've fixed it going to /var/lib then "chown lightdm.lightdm lightdm/"
This doesn't work for me.
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.6.1, UID=0 PID=1230
[+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Adding default seat
[+0.00s] DEBUG: Starting seat
[+0.00s] DEBUG: Starting new display for greeter
[+0.00s] DEBUG: Starting local X display
[+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Activating VT 7
[+0.01s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.01s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+0.01s] DEBUG: Launching X Server
[+0.01s] DEBUG: Launching process 1234: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.01s] DEBUG: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.48s] DEBUG: Got signal 10 from process 1234
[+0.48s] DEBUG: Got signal from X server :0
[+0.48s] DEBUG: Connecting to XServer :0
[+0.48s] DEBUG: Starting greeter
[+0.49s] DEBUG: Started session 1241 with service 'lightdm-greeter', username 'lightdm'
[+0.49s] DEBUG: Session 1241 authentication complete with return value 0: Success
[+0.49s] DEBUG: Greeter authorized
[+0.49s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+0.49s] DEBUG: Session 1241 running command /usr/sbin/lightdm-gtk-greeter
[+0.53s] DEBUG: Greeter connected version=1.6.1
[+0.53s] DEBUG: Greeter connected, display is ready
[+0.53s] DEBUG: New display ready, switching to it
[+0.53s] DEBUG: Activating VT 7
[+0.66s] DEBUG: Greeter start authentication for lipek
[+0.66s] DEBUG: Started session 1261 with service 'lightdm', username 'lipek'
[+0.67s] DEBUG: Session 1261 got 1 message(s) from PAM
[+0.67s] DEBUG: Prompt greeter with 1 message(s)
[+5.21s] DEBUG: Continue authentication
[+5.24s] DEBUG: Session 1261 authentication complete with return value 0: Success
[+5.24s] DEBUG: Authenticate result for user lipek: Success
[+5.24s] DEBUG: User lipek authorized
[+5.24s] DEBUG: Greeter sets language pl_PL.utf8
[+5.25s] DEBUG: Greeter requests session gnome
[+5.25s] DEBUG: Using session gnome
[+5.25s] DEBUG: Stopping greeter
[+5.25s] DEBUG: Session 1241: Sending SIGTERM
[+5.25s] DEBUG: Greeter closed communication channel
[+5.25s] DEBUG: Session 1241 exited with return value 0
[+5.25s] DEBUG: Greeter quit
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Restoring privileges
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Writing /home/lipek/.dmrc
[+5.33s] DEBUG: Restoring privileges
[+5.33s] DEBUG: Calling setresuid
[+5.33s] DEBUG: Calling setresgid
[+5.36s] DEBUG: Starting session gnome as user lipek
[+5.36s] DEBUG: Session 1261 running command /etc/lightdm/xsession gnome-session
[+5.38s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+5.38s] DEBUG: Session 1261 exited with return value 0
[+5.38s] DEBUG: User session quit
[+5.38s] DEBUG: Stopping display
[+5.38s] DEBUG: Sending signal 15 to process 1234
[+5.77s] DEBUG: Process 1234 exited with return value 0
[+5.77s] DEBUG: X server stopped
[+5.77s] DEBUG: Removing X server authority /run/lightdm/root/:0
[+5.77s] DEBUG: Releasing VT 7
[+5.77s] DEBUG: Display server stopped
[+5.77s] DEBUG: Switching to greeter
[+5.77s] DEBUG: Starting new display for greeter
[+5.77s] DEBUG: Starting local X display
[+5.77s] DEBUG: Using VT 7
[+5.77s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+5.77s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+5.77s] DEBUG: Launching X Server
[+5.77s] DEBUG: Launching process 1271: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+5.77s] DEBUG: Waiting for ready signal from X server :0
[+6.22s] DEBUG: Got signal 10 from process 1271
[+6.22s] DEBUG: Got signal from X server :0
[+6.22s] DEBUG: Connecting to XServer :0
[+6.22s] DEBUG: Starting greeter
[+6.22s] DEBUG: Started session 1276 with service 'lightdm-greeter', username 'lightdm'
[+6.22s] DEBUG: Session 1276 authentication complete with return value 0: Success
[+6.22s] DEBUG: Greeter authorized
[+6.22s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+6.22s] DEBUG: Session 1276 running command /usr/sbin/lightdm-gtk-greeter
[+6.26s] DEBUG: Greeter connected version=1.6.1
[+6.26s] DEBUG: Greeter connected, display is ready
[+6.26s] DEBUG: New display ready, switching to it
[+6.26s] DEBUG: Activating VT 7
[+6.40s] DEBUG: Greeter start authentication for lipek
[+6.40s] DEBUG: Started session 1296 with service 'lightdm', username 'lipek'
[+6.40s] DEBUG: Session 1296 got 1 message(s) from PAM
[+6.40s] DEBUG: Prompt greeter with 1 message(s)
** (process:1276): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:18: Not using units is deprecated. Assuming 'px'.
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:20: Not using units is deprecated. Assuming 'px'.
** (lightdm-gtk-greeter:1278): WARNING **: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
** (lightdm-gtk-greeter:1278): WARNING **: Failed to load user image: Failed to open file '/home/lipek/.face': Permission denied
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
Any ideas?
Last edited by LiPeK (2013-09-13 21:55:51)

Sapinst does not start after successful finish of an option

Hello Colleagues,
I successfully finished Export Preparation using sapinst of SWPM.
When I start sapinst again it always says:
INFO 2014-12-10 14:11:59.214 [CServiceSelectionBase.cpp:736]
The installation of component NW_Prepare_Export|ind|ind|ind|ind finished 10_Dec_2014_14_11_59 has completed.
INFO 2014-12-10 14:11:59.261 [syuxcpath.cpp:447]
 CSyPath::createFile() lib=syslib module=syslib
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2014-12-10 14:12:01.267 [syuxctask.cpp:849]
 CSyTaskImpl::cancel() lib=syslib module=syslib
Cancelled task 0.
Unknown exception in GuiEngine.
guiengine: 2014-12-10 14:12:01 Ended client connection with unknown exception
I cannot find anything relevant in sapinst_dev.log, sapinst.log, sapinst_loginquirer.log.
Linux 3.0.76-0.11-default x86_64
Kind Regards,
Kirill

Hello All,
Thanks a lot for your suggestions. I was trying everything, but I do not think I've done something good intentionally.
After each of the below steps I tried to run sapinst again.
1. Restart user session (sudo)
2. Reboot server
3. Rename /tmp/sapinst_instdir/.lastInstallationLocation
4. Rename <user_home>/.sdtgui/
5. Rename sapinst_exe.xxxxxx.xxxx
After 4 and 5 it did not start at all.
It now has opened correctly showing me the initial screen with all the options of sapinsts. If I encounter the problem again, I will try each step again more systematically.
Kind Regards,
Kirill

EHP installed front end not started

Hi,
I started EHPI tool in linux box through xmanager , the following message is came then started http://linuxsap1:4239/
sdtdsu.jnlp file also I saved in my system but front end screen not coming?
linuxsap1:sedadm 58> STARTUP
Checking if C++ runtime is installed ...
Starting from /db2/SED/EHPI/sdt...
Checking username "sedadm" for compliance...
Feb 17, 2012 9:36:11 PM [Info]: *************************
Feb 17, 2012 9:36:11 PM [Info]: Starting Server
Feb 17, 2012 9:36:11 PM [Info]: Reading server configuration.
Feb 17, 2012 9:36:11 PM [Info]: Reading service configuration DSUService.
Feb 17, 2012 9:36:11 PM [Info]: Configuring LogManager ...
Feb 17, 2012 9:36:11 PM [Info]: ************************************************
Feb 17, 2012 9:36:11 PM [Info]: Starting SL Controller listening on port 4241 ..
Feb 17, 2012 9:36:11 PM [Info]: Starting StorageService ...
Feb 17, 2012 9:36:11 PM [Info]: Initializing SecurityManager ...
Feb 17, 2012 9:36:12 PM [Info]: Server certificate fingerprint is B6 48 B9 6D F3
3A 2C FC E7 55 48 E6 A5 CE ED 36
Feb 17, 2012 9:36:12 PM [Info]: Configuring HTTPManager ...
Feb 17, 2012 9:36:12 PM [Info]: Starting WebstartService ...
Feb 17, 2012 9:36:12 PM [Info]: Starting RoleService ...
Feb 17, 2012 9:36:12 PM [Info]: Starting AlertService ...
Feb 17, 2012 9:36:12 PM [Info]: Starting NotesService ...
Feb 17, 2012 9:36:13 PM [Info]: Starting ProcessService ...
Feb 17, 2012 9:36:13 PM [Info]: MIDService switched off.
Feb 17, 2012 9:36:13 PM [Info]: Starting FileService ...
Feb 17, 2012 9:36:13 PM [Info]: LogService switched off.
Feb 17, 2012 9:36:13 PM [Info]: Starting MailService ...
Feb 17, 2012 9:36:13 PM [Info]: Starting services ...
Feb 17, 2012 9:36:13 PM [Info]: Starting service "DSUService" ...
Feb 17, 2012 9:36:13 PM [Info]: Service "DSUService" started
Feb 17, 2012 9:36:13 PM [Info]: Services started.
Feb 17, 2012 9:36:13 PM [Info]: Starting HTTP server listening on port 4239 ...
Feb 17, 2012 9:36:13 PM [Info]: HTTP server started.
Feb 17, 2012 9:36:13 PM [Info]: SL Controller started.
Thanks
Siva

sdtdsu.jnlp file also I saved in my system but front end screen not coming?
You don't have to save it, you need to run it in a java enabled web browser. It is hard to diagnose as the problem can be in various areas, Try another client, another browser, check installed java versions etc.
Cheers Michael

SAP JVM switch SAPINST GUI not launching

Hi All,
I have performed SAP JVM switch in all portal servers. One of the server is giving issue. I is not launching sapinst GUI screen. There was 2 JDK versions installed j2sdk1.4.2_13 and j2sdk1.4.2_29. I keep tried changing j2sdk1.4.2_29 in some properties file besides java home is pointing to j2sdk1.4.2_29. I also changed SAPINST_JRE_HOME property in environment variables with j2sdk1.4.2_29 to be in sync. Now below log is showing j2sdk1.4.2_29 but it is still not launching sapinst gui. Please help. System: Portal 7.0.
Program starter log:
Program is starting... Please wait!
SAPinst build information:
Version: 2014.09.0
Build: 1521363
Compile time: Okt 05 2014 - 16:33:50
Make type: optU
Codeline: 720-2_REL
Platform: NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\WINDOWS\TEMP\1\sapinst_exe.6052.1416864069
guiengine: 2014-11-24 16:21:19 Waiting for client connection (1)
SDT start mode [Java: C:\j2sdk1.4.2_29-x64\bin||Home: C:\Documents and Settings\epdadm||Cd: E:\Workarea\SAP_JVM] => /default/
Starting GUIServer using:
SAPinst port : pipe:480:456
GUIServer port : 21212
GUI autostart : on
GUI mode : normal
Curdir : E:\Workarea\SAP_JVM
command : C:\j2sdk1.4.2_29-x64\bin\java.exe -cp "C:\WINDOWS\TEMP\1\sapinst_exe.6052.1416864069\jar\instgui.jar" -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME SDTServer "rootdir=C:\Documents and Settings\epdadm\.sdtgui" config=jar:sdtserver.xml guiport=21212 -nolock -srvarg=/SAPinstService/host=127.0.0.1 -srvarg=/SAPinstService/port=pipe:480:456
CurrentDirectory: E:\Workarea\SAP_JVM.
Thanks,
Kavitha Rajan.

very true Reagan.
Kavitha, you just need to make sure that the instance profile has the right details.
 SAPJVM_VERSION. Enter the new version of the SAP JVM e.g.:
 SAPJVM_VERSION = 4.1.028
 and
 jstartup/vm/home = <location of the new jdk>
 for example:
 jstartup/vm/home = /usr/sap/<SID>/SYS/exe/jvm/hpia64/
 sapjvm_6.1.028
After the change, delete following files (they will be recreated after the j2ee restart):
/usr/sap/<SID>/<INSTANCE>/j2ee/cluster/instance.properties.vmprop
/usr/sap/<SID>/<INSTANCE>/SDM/program/config/sdm_jstartup.properties.vmprop
Now do a complete cluster restart.
Regards,
Hemanth

Sap Installation Messed up (GUI not starting)

Hi there,
I'm not sure if this is the right place to post... anyway I have a problem with my sap installation.
What happened is that I tried to install Adobe LiveCycle Designer using the SAP front end installer.
I left only the Adobe LiveCycle Designer option checked (Business Explorer and SAP GUI were unchecked): the installation program started to install that software, and then began to uninstall the SAP GUI. When I realized that I stopped the setup program, but the SAP GUI was obviously messed up.
The problem now is that I can't install the SAP GUI again, because the option doesn't show anymore in the setup program.
The feeling is that something is not consistent between the filesystem and the Windows register.
Does anybody experienced the same problem or has an idea on how to solve it?
Any help would be greatly appreciated, thank you.

Hi MosMarco,
I am happy to hear that your problem is solved! But you didn´t need to thank me as you found the solution yourself!
Have a nice day and have fun with the Adobe tool!
P.S.: Please check that the Adobe editor is also actually working, because in the past I had some troubles with installing the wrong version! :-s

Virtualbox - Installed VM will not start

Hi,
although I'm satisfied Arch user for quite long time, this is the first time I feel need to ask on this forum. So, please, bear with me
I followed installation instructions on Arch wiki:
pacman -S virtualbox-host-modules virtualbox
modprobe vboxdrv
Since I am using stock kernel, this should be sufficient (according to the guide). Then I ran virtualbox, successfully installed Ubuntu 64-bit and rebooted VM. All went ok. However, after turning the VM off, I am not able to turn it on again - VBox freezes after showing two "Starting mirtual machine" dialogues, similarly as in this post. No dmesg output, vbox log here. I tried this process several times, strangely, sometimes the system booted, but mostly I got stuck again.
My system is 64-bit Intel, package versions:
linux 3.15.8-1
virtualbox 4.3.14-3
virtualbox-host-modules 4.3.14-3
Not sure if its important, but I chose 2 GB RAM and 20 GB HDD space for VM.
Last edited by dooku (2014-08-08 06:22:07)

I have the same problem. I am using virtualbox_4.1.8_OSE. I followed the arch wiki on phpvirtualbox. As suggested I also used the Conf file and rc script from PUEL edition in AUR. But it fails.
~]$ vboxwebsrv -b --logfile /var/log/vboxweb.log --pidfile /var/run/vbox/vboxwebsrv.pid --host 192.168.1.100
Oracle VM VirtualBox web service version 4.1.8_OSE
(C) 2005-2011 Oracle Corporation
All rights reserved.
VirtualBox web service 4.1.8_OSE r75467 linux.amd64 (Dec 19 2011 17:58:34) release log
00:00:00.000 main Log opened 2011-12-28T01:02:00.383082000Z
00:00:00.000 main OS Product: Linux
00:00:00.000 main OS Release: 3.1.5-1-ARCH
00:00:00.000 main OS Version: #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
00:00:00.000 main OS Service Pack: #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
00:00:00.000 main Executable: /usr/lib/virtualbox/vboxwebsrv
00:00:00.000 main Process ID: 1375
00:00:00.000 main Package type: LINUX_64BITS_GENERIC (OSE)
vboxwebsrv: error: failed to daemonize, rc=VERR_FILE_NOT_FOUND. exiting.
and
sudo /etc/rc.d/vboxweb start
Password:
:: Starting VirtualBox Web Service [FAIL]

Suse11.2 SAP ERP6 INSTALL ./sapinst do not start

Similar Messages

Maybe you are looking for