Suspect 'activity' (log provided & analysis requested)

Everytime I use my Air, after anywhere from 5 to 15 minutes it gradually starts making this loud 'fan' noise... and, if I'm on the internet, it's performance slows down dramatically.
Does anyone have an inkling as to what may be going on here?
Thanks!
Here's a sample of my log from Console:
10/10/09 3:52:53 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 3:52:53 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 3:53:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10a210.cron[3773]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:53:02 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 3:53:02 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 3:53:33 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:54:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3809]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:54:37 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:55:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3839]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:55:43 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:56:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3871]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:56:11 PM OK-Computer-2 WMV Player[3897] WMV Player 3897 com.apple.console Warning F4MUpdateCheck: Connection failed! Error - no Internet connection http://www.flip4mac.com/Updater/WMV/update2.plist?version=2.2.0.49&productid=000 0000&OSVersion=10.5.2&CPU=Intel%20Core%202%20Duo&QTVersion=7.6.2
10/10/09 3:56:39 PM OK-Computer-2 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[134] /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder 134 auth Error Unexpected quarantine error: -5000; ignoring
10/10/09 3:56:48 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:57:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3908]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:57:53 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:58:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3937]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 3:58:59 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 3:59:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[3968]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:00:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4000]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:00:03 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:01:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4031]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:01:08 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:02:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4060]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:02:12 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:02:25 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:02:25 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:02:57 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:02:57 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:02:57 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:02:57 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:03:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4098]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:03:17 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:04:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4128]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:04:22 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:05:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4159]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:05:27 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:06:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4186]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:06:33 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:06:25 PM OK-Computer-2 com.apple.launchd[77] com.apple.launchd 77 com.apple.console Notice (0x10b590.Locum[4089]) Exited: Terminated
10/10/09 4:07:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4213]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:07:38 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:08:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4240]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:08:43 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:09:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4267]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:09:43 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:09:43 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:09:43 PM OK-Computer-2 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[134] /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder 134 user Error StatusMonitor::volumesChangedCallBack returned -47
10/10/09 4:09:49 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:10:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4299]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:10:03 PM OK-Computer-2 airportd[4325] airportd 4325 Daemon Warning FastFinder scanning channels again
10/10/09 4:10:03 PM OK-Computer-2 airportd[4325] airportd 4325 Daemon Warning Could not find "SkyBlox Secure"
10/10/09 4:10:04 PM OK-Computer-2 airportd[4325] airportd 4325 Daemon Warning Could not find any preferred networks; trying broadcast requests..
10/10/09 4:10:06 PM OK-Computer-2 kernel kernel 0 kern Debug WLCE_COUNTRY_CODECHANGED
10/10/09 4:10:06 PM OK-Computer-2 airportd[4325] airportd 4325 Daemon Warning Broadcast requests failed..
10/10/09 4:10:06 PM OK-Computer-2 kernel kernel 0 kern Debug en0: 802.11d country code set to 'US'.
10/10/09 4:10:06 PM OK-Computer-2 kernel kernel 0 kern Debug en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 40 48 56 64 104 112 120 128 136 153 161 36 44 52 60
10/10/09 4:10:12 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:12 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:12 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:12 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:13 PM OK-Computer-2 kernel kernel 0 kern Debug WLCE_COUNTRY_CODECHANGED
10/10/09 4:10:13 PM OK-Computer-2 kernel kernel 0 kern Debug en0: 802.11d country code set to 'X0'.
10/10/09 4:10:13 PM OK-Computer-2 kernel kernel 0 kern Debug en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 5 6 7 8 9 10 11 1 2 3 4 5 6 7 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 40 48 56 64 104 112 120 128 136 153 161 36 44 52 60
10/10/09 4:10:18 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:18 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:18 PM OK-Computer-2 kernel kernel 0 kern Debug AirPort: Link Up on en0
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:22 PM OK-Computer-2 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[134] /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder 134 user Error StatusMonitor::volumesChangedCallBack returned -47
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:22 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:29 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:29 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Error (com.apple.familycontrols) Failed to count the number of files in "/Library/Application Support/Apple/ParentalControls/ALRHelperJobs": No such file or directory
10/10/09 4:10:52 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:11:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4351]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:11:56 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:12:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4379]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:13:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4406]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:13:00 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host
10/10/09 4:14:00 PM OK-Computer-2 com.apple.launchd[1] com.apple.launchd 1 com.apple.console Warning (0x10b850.cron[4433]) Could not setup Mach task special port 9: (os/kern) no access
10/10/09 4:14:05 PM OK-Computer-2 ntpd[14] ntpd 14 daemon Error sendto(17.151.16.23) (fd=20): No route to host

Martin,
In my OOW session on thursday about Dispelling Myths about Apex I'm going to be sharing some metrics, which hopefully I can share after the session too, which should be interesting.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd

Similar Messages

Is my mac dead? log screenshot analysis request

Salutations! And thanks in advance for any help offered.
Would anyone here be so kind as to look over the attached screenshot and offer an interpretation of my MBP's condition? I'm guessing that the motherboard is fried. When I see the word "Fault" followed by "CPU" I get nervous.
MBP 2012 or 2013 13", not retina, has had prior water damage but was fine until now, runs Mac OS 10.8 and Windows 8 through VMware Fusion, all on the same internal drive. Wouldn't boot after minor water intake (from the thin hinge side). removed bottom of case and set in front of air conditioner overnight to dry. Powered up fine in the morning. Shut down fine, too. now it mysteriously has stopped booting- will briefly flash this screen before shutting down (screen goes black) and then displays the "you must restart your computer" and then tries to boot again in an infinite loop. also got this message after trying to restore from time machine:
Thank you so much!
Bill

I suppose it's a HDD failure. Get new drive and install it would be fine.
And you have TimeMachine back up, you can restore it as well.

How to monitor the Activation process of a request in DSO

Hi all,
I have loaded the data ( 7 million) records in DSO as a new request. I have clicked on the activation button.
Can any one tell me where can we check the status of this activation process of this request?
When clicked on monitor or logs button it shows me all as status green, but not able to figure out where to check the status of activation process.(the data is still not activated )
any help would be great.
Thanks in advance.
Regds,
Maddy

Hi,
There are a couple of places where you can see the activation progress.
1) To start with SM37 job log > (give BI_PROCESS_ODSACTIVAT or BI_ODSA*)
and it should give you the details about the activation job. If its active make sure that the job log is getting updated at frequent intervals.
2) For very huge number of records SM37 job log may not get update frequently. In that case you have a workaround.
Go to contents > Active Data table > No. of entries > This will keep on increasing at frequent intervals.
3) SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
4) Go to Activate button in Target > Request tab. Inside you can see a job log button. It will also show some log regarding the last activation.
Thanks,
JituK

Field Changes not captured in processing log in service request

Hi Experts,
I have activated the processing log for service request in CRM, but I am only able to see the changes done to status,notes,attachments. As the field level changes are not shown in processing log in web ui, but the same is visible in the GUI in change log. Is there any specific setting which I need to do capture the field level changes? Please let me know on the same
Thanks
Abishek

Hi Navin,
Please navigate to the following SPRO path and update the customizing the field that you display in the processing log.
SPRO->Customer Relationship Management-> Transactions -> Settings for Service Requests -> Settings for Processing Log -> Define Change History for Processing Log.
Thank you,
Regards,
Mayoo

Virsa Toolbox - Reason/Activity & Log Report

Hello and Happy New Year!
I have been experiencing an issue where I am frequently kicked out of the SAP GUI when running some of the Virsa Tool Box -- Virsa Utilities and Reports --- Reason/Activity & Log Reports specifically. My SAP GUI is 710, Build 967944, Patch Level 7 and my FF/SPM is 5.2 SP12. This problem of getting kicked out started at or near the end of the year and continues today. There is really no rhyme or reason when or why it happens, but I want to see if anyone else experiences this same issue or if anyone knows of a work around/resolution?
Regards,
Greg

I have upgraded the 7.10 GUI to SP15 and the problem still exists. I had our Basis team take a look at the logs and it shows that my connection was terminated or that I lost connection. Also, as a side note, the problem is not server specific.
To provide a little more info, this problem occurs after I have ran the report and then save the file to my desktop as an .rtf. It is intermittent and could happen when I run either report and could occur 50% of the time. I still get the final report, but the GUI will disappear.

Announcing new activity logging and reporting capabilities for Office 365

Announcing new activity logging and reporting capabilities for Office 365We are pleased to announce the rollout of new activity logging and reporting capabilities for Office 365, including the Office 365 activity report, comprehensive logging capability, PowerShell command or cmdlet and a preview of the Office 365 Management Activity API.Thisnew capability provides you increased transparency, allowing you to monitor and investigate actions taken on your data, and comply with laws and regulations.Office 365 activity reportThe Office 365 activity report enables you to investigate a user’s activity by searching for a user, file or other resource across SharePoint Online, One Drive for Business, Exchange Online and Azure Active Directory, and then download the activities to a CSV (comma separate values) file. You can filter by date range,...
This topic first appeared in the Spiceworks Community

Hi,
Do you have any specific questions? We'll certainly try to help you, but we won't do your homework for you. That wouldn't help you learn at all.
I recommend looking over the learning materials here, they're quite good for getting started with PowerShell:
http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Find messages/ichat activity log

Someone I don't know recently requested a connections in messages via a .mac address request. I accidentally clicked accept instead of refuse. Now I can't find any record of that user or the accepted connection. I had a look in the activity log but can't find it. Running 10.9.4.
Any ideas?

Hi,
Was it and AIM Buddy List request or an iMessages one ?
An @mac.com ID can be used as an iMessages account if linked to iCloud (normally because it was updated to MobileMe and then iCloud).
It can also be used as a AIM Screen Name (now only on iChat 6.0.1 and in Messages dues to security changes at Apple and AIM)
If it is AIM you still may not see the name in the Buddy List if they are Invisible or are blocking you.
See the Buddy list for the First (Status drop down) and check the Preferences > Accounts > AIM Login > Privacy tab.
9:45 pm Thursday; September 25, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Record milli-second into Activity Log table

Hello,
Can we have any option to make ME logs into its table(s) the time stamp by milli-second like 2011-03-24 10:31:08.123?
[Background]
We develop a custom program to request SAP ME to perform signoff, adjust qty, start and complete.
The 4 requests will request one by one in the described sequence.
When we perform above program with an active status SFC and confirm how ME's Activity Log Report displayed.
Then, the sequence was strange.
[operation sequence]
1. SIGNOFF, 2. ADJUST_QTY, 3. START, 4. COMPLETE
[Activity Log displayed]
1. ADJUST_QTY, 2. COMPLETE, 3. SIGNOFF, 4. START
We This log will make user confused.
According to our engineer, all of these 4 actions are recorded with same time stamp like 2011-03-24 10:31:08.000.
So, I think if there's some option to allow mill-second log into ME database, it will be a solution.
(I guess, the other log tables like production log, resource_time_log and production_comment are also in similar situation.)
Best Regards,
Takahiro Uesugi

Takahiro,
Such changes have already been implemented for some customers to meet requirements of their workload. Not sure about including them into future releases. You need to discuss this with SAP consultants to submit the change for review by Product Management.
Regards,
Sergiy

How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give.

Activity log design issue in web application .. Whatabout AOP ?

Hi guys. ..
I am working on a big web application in which there is module called activity log which actually logs most of the activities one perform in application like make a payment , defere the payment , issue the check etc. Almost all components in the application less or more use this component.
Now what is my issue is its design sucks. Every time a new activity has to added one has to add a separate class for that and make a call at a particular place in other component depending on some logic. sometime it becomes a nightmare to maintain all this.
I am sure there should be better way to do it .without making a call to this component every othere class.
I dont know much about AOP. Is AOP got some solution for that.? or any design pattern I should use to make it maintainable or simple to add new activities whenever need arise.
Thanks
HibernFan.

Hi guys. ..
I am working on a big web application in which there
is module called activity log which actually logs
most of the activities one perform in application
like make a payment , defere the payment , issue the
check etc. Almost all components in the application
less or more use this component.
Now what is my issue is its design sucks. Every time
a new activity has to added one has to add a separate
class for that and make a call at a particular place
in other component depending on some logic. sometime
it becomes a nightmare to maintain all this.
I am sure there should be better way to do it
.without making a call to this component every othere
class.
I dont know much about AOP. Is AOP got some solution
for that.? or any design pattern I should use to make
it maintainable or simple to add new activities
whenever need arise.You are thinking exactly the right thing. AOP is born for this sort of thing, and it addresses exactly the problem you've experienced: Move all that code that's duplicated with every new activity into the advice class.
You can do AOP if you have AspectJ or, better yet, Spring.
If not, you can think of Filters as a kind of AOP. Since this is a Web app you can write a Filter that does the logging for you.
Either way, you've nailed the idea. Good thinking.
%

Activity Templates inside Service Request Templates

I have run into a problem and I was hoping there is an easy solution.
I have built Activity Templates for Access Requests, one template per application.
Then I have Service Requests for per Job Code, which include up to 20 of those Activity Templates.
I did it this way specifically so if an Application Access process changed, I could just edit the Activity Template for that Application, and all the Service Requests that use that template would update as well.... or so you would think.
I just had to change some, and my service request is still showing the old templates, not the esits I did. I waited over an hour. Is this a workflow problem, or a functionality problem? If the Service Request Template saves when created instead of pullign
the activity templates each time its opened, it defeats my purpose of trying to do this modularly. This also makes absolutely no sense to me either, if that is in effect how it works.
What that will mean is I will have to edit every service request that uses a specific activity, instead of just that activity template.

Activity templates do not cascade. When you add an activity template to a Service Request, SCSM creates a copy of the activity template _inside_ the SR template. That's where they diverge.
Any further changes to the original activity template will not be replicated to any SRs that contain that activity.
I'm sorry to say that's the way SCSM's template management was implemented.

Is there a way to restore an accidentally deleted activity log?

I am soooo embarrassed. I accidentally deleted the activity log of a phone number I wish to keep. Is there anyway that I can have that activity restored or is it gone forever??

Backing up the device AFTER the calls have been deleted will not backup something that has been previously deleted.
Weekly backups, or more often, are very worth doing.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to capture content activity log from DMP?

Hi There,
I try to implement content activity log from DMP. The information that I want to get are DMP IP, Conent File Name (video or jpg file), open date/time. The only way that I can do is sending http command direct to DMP (http.file via port 7777).
Is it possible to implement Syslog server to get those information from DMP?
Thank you
Panya

Hi Panya,
There is a feature called "Proof Of Play" which was created exactly to track what the DMPs are playing, you can find the documentation at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmm/user/guide/signs/proof.html
Is this what you are looking for?
Best Regards,
Marco

LOGS PROVIDER HAS STOPPED ,WHAT DO I DO TO FIX PROBLEM?

GALAXY S4 -"LOGS PROVIDER HAS STOPPED .HOW DO I FIX PROBLEM?

OKUN999,
We're on the case and can help stop that error message from popping up! Please go to Apps>Settings>Application Manager>select LogsProvider from the All tab to clear the cache and history from this program. Then restart phone and test. Keep us posted!
SarahO_VZW
Follow us on Twitter @VZWSupport

SSIS 2008 Logging - SSIS Log Provider for SQL Server

Simple SSIS package - copies a table from Server A to Server B.
Everything works except logging using SSIS Log Provider for SQL Server. Selecting the similar events to using
SSIS Log Provider for Text Files does generates a file on the server.
I specified server B on the configuration for SSIS Log Provider for SQL Server.
Logged on with a username with sysadmin rights on Server B. Executed the package using that login and nothing is written to msdb..sysssislog
any ideas what's going on or what am I doing wrong?

Just to be sure that the basics are right :
You sure that you configured the log provider correctly?
Selected the required 'components' on the left bar?
Selected events on the Details Tab?
selected the right table? I mean it should be --> select * from msdb..sysssislog
The default schema in your DB setup is dbo right? Coz, if not the logging will be a real problem. You might wanna recreate the table then ..
Btw, if you still experience issues, I'd advise you to enable all events and check for logging just to make sure that there isnt any prob with the DB setup ..
Do try and let us know :)
Edited:
Also a few more:
Check what database you chose in the connection setting page of the logging configuration wizard and check for entries in sysssislog of tht DB as, the sysssislog will be created only in that db.
Ensure that you have execute permission on sp_ssis_addlogentry in that particular db (mostly msdb). Can be checked via:
select name,
has_perms_by_name(name, 'OBJECT', 'EXECUTE') as has_execute
from msdb.sys.procedures
where name like 'sp_ssis_addlogentry' --for 2008 edition and up
or name like 'sp_dts_addlogentry' --for 2005 edition
Thanks to @Sathyanarrayanans for pointing this out :)
Hope this should help ..
Thanks, Jay <If the post was helpful mark as 'Helpful and if the post answered your query, mark as 'Answered'>

Suspect 'activity' (log provided & analysis requested)

Similar Messages

Maybe you are looking for