Suspect manufacturer defect, slide to unlock fail on one side of the screen. ls

I have try the right hand side potrait mode, and the digitizer fails to slide to unlock. Is the manufacturer defect ?

I would try restoring the iPad, if it doesn't fix it, I would say get it replaced!

Similar Messages

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls

My iphone doesn't ring when it's unlocked .. i have calls but the screen still black and when i slide to unlock the screen i found i had missed calls
i have tried manythings but it doesn't work
i put it in silent mode and i found my calls comes normaly and it works good but when i turn on ring mode it's back as it how can i fix that ?!

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

On my Mac, when I exit "full screen" with ICAL, ICAL disappears. It appears to slide off to the right side of the screen.

On my Mac, when I exit "full screen" with ICAL, ICAL disappears. It appears to slide off to the right side of the screen.

Create a New Profile as a test to check if your current profile is causing the problems.
-> Basic Troubleshooting: Make a New Profile
* https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
-> If that New Profile works then you can recover your Bookmarks and Passwords from the Old Profile.
-> Recovering important data from an old profile
* https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
Check and tell if its working.

HT1414 My iphone 4 is stuck. master reset did not work. won't slide to unlock and if do get to the passcode screen, it won't recognize my entries. I have tried connecting to itunes through a pc, but since I can't unlock my phone it won't let me do it the

Iphone 4 is stuck. I have tried a master reset and it didn't work. it won't slide to unlock or power off. I did somehow get to the passcode screen but it didn't let me enter anything. I have also tried on a pc through itunes but since I can't unlock it, it won't let me do that either.

http://support.apple.com/kb/ht1808

Follwing query fails on one database, but the same works on other Database

Hi,
The following SQL fails on one database with ORA-01722 but the same works on other database.
SQL> SELECT i.version, d.name, i.instance_name, i.host_name
FROM v$instance i, v$database d, v$parameter p 2
3 WHERE p.name = 'instance_number'
4 AND DECODE(p.value, 0, 1, p.value) = i.instance_number;
AND DECODE(p.value, 0, 1, p.value) = i.instance_number
ERROR at line 4:
ORA-01722: invalid number
both databases are at same version (10.2.0.1) both are on same machine.
Initailly I suspected NLS settings, I am surprised to see NLS settings are also same on both the databases.
Any thoughts why is it happening

Thanks for the reply
Yes, i know that i am comparing varchar against number.
bu there is no way that the database where the query is working has correct types on both sides as the tables are standard oracle dictionary tables.
Yes, i tried this earlier, it works
AND DECODE(p.value, '0', '1', p.value) = to_char(i.instance_number)
it is very weired to see that error, i feel it something else that causing the trouble.

Defective IPAD replaced but what about my investment on the screen guard?

While I was all smiles for the no nonsense replacement of my defective IPAD with a new one, it left me wondering about my investment of INR 1500 on the screen guard of the previous one.
Now since the IPAD was defective and was replaced without any hassle, does it mean my other investment goes for waste?
Regards,
Saurav

This happened to myself a few years back when I had to get my iPod touch (1st gen) replaced under warranty. This was done at a nearby Apple Store and I brought up that I had an Invisible Shield screen protector on the device. These are impossible to remove and replace (using the same shield) because of the adhesive used and stretchiness of the material. They didn't have that brand in the store but they did give me a complimentary one that they *did* have there. This was years ago when the iPod touch was first released so I don't know what their policy regarding instances like this are.
Sorry to say that if the screen guard issue was not mentioned to begin with and you no longer possess the defective iPad (it has already been turned in as defective), I really don't think that they will compensate or that there is much they can do about it...you can always try but without proof that you lost a screen guard in the exchange process, you are probably out of luck.

My new Iphone 4 will not SLIDE TO UNLOCK. Worked when i left the store yesterday not this morning.

I can't get in to the phone. Bought it yesterday at the ATT store, worked, went home loaded apps and what not, worked, played a game, worked. Slept alarm worked in the morning, used Stitcher app on the way to work. at work at about 8 am would not unlock.
Iphone 4 8g.
When i try to power off the slide to turn off does not work either.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.

Apple have just replaced aMLB $945 aus. as my macbook pro graphics card failed. but 4 weeks later the screen has gone blank .i will take it in as the Mlb is still under warranty. could the MLB be damaged or worn out.?

what do you suppose is wrong with my macbook pro seeing as the apple store have just replaced a MLB at $945aus because of a failed graphic card. the new one they replaced lasted 4 weeks and again a blank screen.

You have a 90 day warranty after your machine has been repaired. Call the Apple Store/AASP and have them take another look at it.
Good luck,
Clinton

How to unlock your iPod touch 5g when the screen is broken?

My iPod touch 5g screen broke. It doesn't respond to touching it at all. I'm trying to back it up to my computer but it tells me I need to unlock it first (which I can't do). Is there any way I could unlock it using iTunes or something?

No, there is no way to backup the iPod.
Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price

HI my iphone 3GS does not respond to swipe to unlock or swipe to shut down, its 1st problem was that it did not respond to touch on the left hand side of the screen. I have restored through itunes via laptop but still the same. Any help please.

I have just used restore and it gave the latest IOS 6 something

If no change after restoring the iPhone with iTunes, the iPhone has a hardware problem.

My ipod is disabled and the slide to unlock screen isnt coming up. how do i fix it

my ipod is diabled and the slide to unlock bar isnt coming up on the screen. when i plug it into itunes it tells me to enter my password on the phone before it can be used with itunes which i obviously cant due to the slide to unlock bar not being there. help me...

Place the iPod in recovery mode and then restore the iPod via iTunes. For recovery mode see:
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

HP Pavillion dv6 - 6116 tx - Manufacturing Defect

Hi
I have bought new laptop(HP Pavillion dv6 - 6116 tx) on last Sunday, 06-Nov-2011. Last night, I observed that there is a manufacturing defect as follows:
Down to the touch pad, side layer and top layer are not joined properly - I could see a gap in between - I need replacement for this.
I bought it from 'HP World' show room at Koramangala, Bangalore - I think, I should approach to the same HP World show room for this problem.
Before going, I want to know how much time it will take for replacement? Also, please let me know the if there is any process for replacements in case of manufacturing defects .
Thanks
Ganesh Bhima

Hi,
You need to contact the sale person over there, sooner is better.
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Slide to Unlock Does not respond.

I have the new iPad. When I turn it off and then back on, the slide to unlock does not respond. However, when I do slide it and wait a little bit, it does unlock. Is there anything I can do to get the slide to unlock to respond?

I have the same problem as dberkovich and I too did resets, restores, reboot, etc. Still acts the same.
Power up iPad (3-new)
slide to unlock is frozen, lights do not move in the background,
wait 10-15 seconds, screen goes black
push home button and slide to unlock is working perfectly.
This occurs everytime after complete power off and then back on.
Took it to a Mac Store,(not Apple store) and representative said "We've never heard of this and it may be software and you should take it to an Apple store."
Fact: My nearest Apple store is about a 3 hour drive each way with even no traffic.
This problem occured when my software was updated with IOS6.

Suspect manufacturer defect, slide to unlock fail on one side of the screen. ls

Similar Messages

Maybe you are looking for