Suspend MDT, Sysprep for disk cloning, and resume with new hardware failure.

I am able to successfully Sysprep for disk cloning after pausing the Deployment (via LTISuspend). The problem is when I attempt to resume the Deployment after duplicating the hard drive and placing in new hardware it fails immediately stating that it cannot
open the TSENV.DAT (80090005). It works fine if you resume in the identical hardware it was built in.
The hardware is identical for all computers receiving the cloned drive with the Mac Address, Serial Number, and UUID being different.
Knowing that the TSENV.DAT is encrypted, is there a way to prep it for minor hardware (mac address, uuid, and serial number only) change prior to pausing and sysprep so it does not fail?
Using MDT 2012 and Windows 7 OS.
Thanks

Let me add to what Mr. Owen described.
We have a complex MDT. It has been used for years for a globally scaled corporate desktop.
What we are looking to do to is sysprep this machine 3/4 of the way through the process, clone the drive, and then use the cloned drive on like hardware models (we used PersistDrivers in the Unattend).
I initially ran sysprep outside of the MDT. It ran successfully, however when we moved the syspreped (and cloned) drive to another hardware of identical type we got the error Mr Owen mentioned. What we hoped would happen if we called Sysprep from
the MDT directly is the TSENV would be cleaned/updated to remove any workstations specific identifiers and thus eliminate the error.

Similar Messages

Directory Damage, what can be used for Disk Repair and Virus Detection?

Hi,
My eMac is acting up. Yesterday I started getting these messages that I needed to restart my computer (message was in a brown box window with an icon of a start up button in background).
I did the disk repair using Start up CD and it came back with "invalid key......." or something like that, and when I tried to repair it, it tried to repair the B-Tree's but then said it could not repair the problem.
I have Diskwarrior 3.03 Build 39, on a CD and on my FW Ext HD, which has a clone of my Mac HD.
Diskwarrior could not produce a graph of Mac HD because the directory was damaged. When I did a rebuild it hung on step 9 comparing directories, said there was 7 million + tests. ( I let it hang on step 9 for 15 hrs. to see if maybe it was just taking a long time due to corrupt directory). I finally clicked on Skip and got to the report page. I could do a preview, but the replace button is greyed out. When I was comparing the sizes of each folder, in both preview and original, I got a can not calculate error message on a few of them. The size of Mac HD in preview compared to the one in Original was different by 4 gbs. A week ago I repaired the Mac HD and did a Diskwarrior directory repair on all my HD's.
Before I do any reformatting of HD or other drastic measures, I was wondering what is safe to use for disk repair and virus detection. I know there is Norton System Works 3.0, Norton AntiVirus and TechTool, are these the only ones? Are these safe to use? Are there any other programs that can repair directory damage?
Thank you in advance,
Deb
eMac 2005 1.42GHz Combo Drive 256MB Tiger 10.4 75GB Mac OS X (10.4) Western Digital (WD) 160GB FW Ext & WD 320gb Media FW Ext, Creative Speakers

The long-standing rule of thimb has been that if Disk Warrior can't repair a mungled disk directory, then you're looking at reformatting or replacing the hard drive. Since this is a week-old hard drive, I'd suspect the replacement hard drive is itself bad. It might save you grief in the long run to contact the vendor who sold you the drive and inquire about their warrenty. You might want to first run the file system check utility fsck as described in Using Disk Utility and fsck
Directory repair and antivirus protection are different critters. Norton AV is mostly safe (if you don't mind it's track record of false positives) and is used by the IT department at the lab where I work. Norton SystemWorks, AKA Disk Doctor Kervorkian, is most assuredly NOT safe. For every poster reporting something nice about it, you'll find at least 2 dozen cursing it. It has a known track record of detecting problems no other utility finds and of "repairing" drives such that nothing can then read or repair the drive short of low-level reformatting (and occasionally even that fails).
Tech Tool Pro 4 has a good reputation, as does Drive Genius. Tiger OS X 10.4.2 and later include a version of Disk Utility that can for the first time also make effective B-tree and keys out of order and overlapped extent repairs. Still, my personal gut feeling is that if Disk Warrior is choking on the hard drive, you're looking at reformatring while zeros the drive (zeroing should detect and map out bad physical secotrs).
You can also refer to Disk First Aid: What to do when it finds an error and to Handling "overlapped extent allocation" errors reported by Disk Utility or fsck

Does anyone have experience for disk damage and loss?

Does anyone have experience for disk damage and
loss for B1? What's the procedure to get new one?
Any cost involved.
Regards,
Kenneth

Hi Kenneth
Usualy we take the strongest measures to avoid that and never let it come to that. You should of had back up's running on and off site. How bad is your problem?? I'm assuming you are talking abou a hard drive that is faulty. Have you tried restarting in Safe Mode??
You get experts that can retrieve data from a hard drive depending how bad the problem is. It usualy cost more than the Hard drive......but if you are desperate and value your data you'll do it.
Hope this helps

Movie plays for 30 secs. freezes and resumes with no sound

I transferred some movies to my Ipod and some of them play normally and some don't.
The videos play on my computer no problem. When I play certain videos on my ipod they'll run for 30 seconds, freeze for 10 seconds and restart with no sound. If I go back to the menu, the movie will play with sound for another 30 seconds and freeze again.
I've updated my software and that didn't help. So frustrating!!
Anyone else having this prob? Any suggestions to fix this?

I just got an iPod 60Gb and am having the same problem with videos I've converted to .mp4 format and loaded onto my iPod. The video plays fine for about 30 seconds, then pauses for about 5 seconds (I didn't press Pause), then continues with no sound.
Did uninstalling version 1.1 of the software and reinstalling version 1.0 work to solve this problem?

I had problem with my apps,they open for a while and closes with in seconds i cant acess them

i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help...

Hi All,How2 delete a pkey for std table and add 2 new primary keys

Hi All,
How2 delete a pkey for std table and add 2 new primary key fields .Please provide me the required procedure .
Thanks&Regards.
Bharat.

Hi Bharat,
First thing is you need to have the access key to change any standard dictionary object/standard programs/ standard transactions.You may get this from your basis person after getting approval from your respective manager.But changing or modifying the standard object is not recommended, but if there is no alternate to meet the business requirement then we have to follow this way only.
Next, you need to check whether this table's primary key is being used in any other table as foreing key or not. If there is, then you must remove this relation and then you can delete the unncessary primary key field from that table.Finally you can add the two new fields and set them as primary key, save, check for any errors and activate.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remeber that password to log out and login with new credentials

I recently changed my apple ID, both email and password. For some reason icloud is on the old email account and i do not remember that password to log out and login with new credentials.

I have the EXACT SAME PROBLEM and have been researching the past 2 hours!!!! Aaargh!

If I buy Creative Cloud subscription for a year and get a new computer in that year, is it transferable?

If I buy Creative Cloud subscription for a year and get a new computer in that year, is it transferable?

You can install on any 2 computer, suppose you have 2 computers already activated with creative cloud, Now if you would like to activate it on a 3rd computer then you have to deactivate from anyone of the previous 2 computer and activate it on the 3rd computer. So totally you can have creative cloud apps in 2 computer.
You can refer the below link for activation and deactivation help.
Activation & Deactivation Help

IPlanet Messaging Server 5.2 (for Solaris 8 and 9) with patch 5.2hf2.13

Hi..
iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)
libimta.so 5.2 Patch 2 (built 19:30:12, Jul 14 2004)
I heard that SUN have released security vulnerability in Sun Java System or iPlanet Messaging Servers that may allow remote unprivileged users to craft specific messages which contain Javascript to be executed in the end user's browser.
The problem can be solved by using iPlanet Messaging Server 5.2 (for Solaris 8 and 9) with patch 5.2hf2.13 or later..
where can I download patch 5.2hf2.13 for messaging server 5.2 ?

Hi,
If you have a support contract with SUN you can log a service request to get a copy of the patch via:
http://www.sun.com/service/online/
Regards,
Shane.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive.

Is it ok to leave my old photos in Aperature and start with new photos in Lightroom? MacPro with 2 x 2.26 Ghz Quad-Core Intel Xeon processor, 6 GB memory, 1 TB harddrive?
Or should I transfer them to Lightroom?

That's really a personal preference. Support for Aperture is coming to an
end and you may find yourself unable to get to theses photos in the future
in the case of a HDD crash if you can't get the software to reinstall.
Faced with that prospect, I would probably put it on my list of things to
do when I am feeling really bored and looking for something to amuse myself
with. You can export your Aperture photos in their original format to a
folder on your desktop and then import them into Lightroom. Use the copy
option on the import to save the photos in a new folder within your
Lightroom catalog.

How do I remove one failing hard drive from raid set and replace with new one

Last Friday apparently one of my raid drives started failing.
As I mentioned on this forum I started getting continous beeping.
I was finally able to get the raid working at a degraded level. I ordered a replacement hard drive which is arriving today.
(In the meantime I made twice daily backups of my work.....)
Below was the message I got from the browser based raid software:
Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
(See this earlier thread if you wish!)
http://forums.adobe.com/thread/727867?tstart=0
At one point when I did the checked the browser interface I saw the message Failed and Degraded
As I said, I was able to work over the weekend on the degraded system.
This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
In any case, the new hard drive is arriving today.
What steps should I take to incorporate the new drive into the raid system.
I have one OS drive
and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
Thanks
Rowby

Harm,
Regarding your comment:
Re: How do I remove one failing hard drive from raid set and replace with new one
Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
Step 1: Identify bad drive serial number using Areca's tools
Step 2: Turn off the computer
Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
Cheers,
Jim

Favicon does not show up on Google chrome and firefox with new muse release. Opera showing favicon ok.

Favicon does not show up on Google chrome and firefox with new muse release when exporting HTML or publishing with FTP. Opera showing favicon ok. Previews Muse release was working fine.
this website was created with one update back BK Foto
this one page was updated with latest updated Muse and after publishing with FTP through Muse favicon does not show up Paslaugų Era | Foto Video Paslaugos

Export your HTML and then Just edit index.html with any text editor look for sentence <link rel="...................................>
Then delete all this sentence and copy this one
<link href="//PATH/favicon.ico" rel="shortcut icon" type="image/x-icon">
PATH = Where you have your favicon.ico
I usually copy the favicon.ico in the folder images so the sentence will be like this
<link href="//mydomain.com/images/favicon.ico" rel="shortcut icon" type="image/x-icon">
i hope it helps you
Sorry about my english, my spanish is much better
Juan Pedro Avila

HT1386 when I first bought my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

when I first got my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

Have you copied your library over from your old computer : http://support.apple.com/kb/HT4527 ?
There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

Moving ZENworks for Desktops 6.5.2ir1 to new hardware

Im preparing to move my NetWare 6.5 server with ZENworks for Desktops 6.5.2ir1 to new hardware.
The recommended way for NetWare is to make use of the Migration Wizard but Im worried about the post tasks, which are mentioned in the documentation. I should reinstall ZENworks as product after the migration and then recover the old configuration. What would be the best way to do so?
And is the Migration Wizard the best tool to move to new hardware for ZENworks or are there better alternatives?
Thanks a lot!
Armand.

Hello,
How did you get on with this? I have been thinking about doing something similar for some time now, but have always been nervous of doing so.
We have PCounter, Printing, SYS/PUBLIC mapping, and ZfD 6.5 running on 1 server, and I would like to just move ZfD to a seperate server.
Can you point me in the direction of the documentation you speak of for migrating ZfD 6.5 ???
cheers,
Originally Posted by voigt-travel
I�m preparing to move my NetWare 6.5 server with ZENworks for Desktops 6.5.2ir1 to new hardware.
The recommended way for NetWare is to make use of the Migration Wizard but I�m worried about the post tasks, which are mentioned in the documentation. I should reinstall ZENworks as product after the migration and then recover the old configuration. What would be the best way to do so?
And is the Migration Wizard the best tool to move to new hardware for ZENworks or are there better alternatives?
Thanks a lot!
Armand.

Suspend MDT, Sysprep for disk cloning, and resume with new hardware failure.

Similar Messages

Maybe you are looking for