Suspend Problems-K9N SLI Platinum (NVIDIA nForce 570 SLI MCP)

I have a problem in that after a suspend (S3) and then restoring back to windows, the PC insists upon doing a full shutdown.
This is a new problem.
Also, the BIOS seems to be not saving it's settings - eg it asked for a 3.5 " floppy at one reboot (never had one installed)
I suspect it is not "remembering the "Restore on AC power Loss" setting. Sometime the "Cool and Quiet" feature works and other times it doesn't. (I have set it and the used Dual Core Centre and I it reports I can change the fan speed)
Any help would be appreciated.
Stephen

Quote from: Bas on 27-February-08, 18:43:42
Check the Jbat1 jumper if you have one, it MUST be set to normal mode, not clearing position.
Can you tell me more about the Jbat1 jumper ? I can't seem to find it in the manual.
I will check all connectors (had a slightly different problem once and it turned out a power lead was loose ...) and try removing my cards and usb devices one at a time.
Thanks 
I've added to my signature ...

Similar Messages

  • K9N SLI/K9N Ultra NVIDIA nForce 570 series chipset based. Boot problems

    Hi
    Im new to these kinds of things and I cant claim to be a tech wiz. I have never encountered this kind of a problem and im not familiar with anything relating to computer hardware, motherboards etc. I will however attempt to describe my dilemma. I have a booting issue with my computer and regardless of re-installing the OS the problem persists. To even get the computer to start i might have to press the power button repeatedly about 30 times. I also get this message on the screen: "Warning!!! The previous performance of overclocking is failed and the system restored to the default settings....". However, I have never attempted any kind of overclocking, nor do I know how to do such a thing. To solve the problem I tried various things, first I reinstalled the OD(win vista). Then I ran various diagnostic tests and eventually entered BIIOS and tried to solve the problem by loading failsafe defaults and later loading optimized defaults. I also reset the CMOS using the red button located next to my chipset. None of the above seem to work and currently im at a loss as to how to solve my predicament. I have no cash to buy a new PC so I HAVE to make it work!
    Keep in mind im merely refering to what it says on the box and I have no idea whatsoever about the meaning and/or interpretation of the combinations of letters and numbers!
    Specs:
    AMD Athlon X2 6000+ 3.0 Ghz Socket AM2 2MB BOXED
    MSI K9N SLI-2F, nForce 570 SLI, DDR 2, Socket-AM2, 2x GbLAN, ATX, 2x PCI ex16
    Cooler master Mystique 631 black
    Hiper type-R black 580 W
    Silent 18 db, 4x SATA, ATX, SLI, 20/24 pin
    Samsung SpinPoint T166 500gb SATA 2, 16 MB 7200 RPM
    2x Corsair value s. PC5300 DDR 2, 2048 MB
    XFX GeForce 8800 GTS 500M 640 MB GDDR3
    PCI-Express, 2x DVI/HDTV/HDCP, 320-bit

    "starting" means my fans and everything else starts running. Well, starting means the power goes on(and stays on) with the familiar whirr of the fans . starting also implies the OS and everything else works. However I cant even get the power to stay on before pushing the power button about 30 times. Slowly and surely it powers up but it really struggles as of late. Its an old computer(about 5 years) and it was running fine until about a week ago.
    Im merely a casual user of my pc, although I enjoy playing games such as world of warcraft, rift or any other MMO. I was thinking that it could be the power supply that is on it's last leg. However, I dont know how to change to a new one, despite reading the guides posted here. I also checked the power supply manual but the information contained within was far too technical for me to comprehend, it might aswell have been written in chinese.
    Im also hesitant to flash BIOS as I have never done such a thing and as far as I know I might fry the whole system if I dont do it right. Lets asume I want to change the powersupply for a new one, should I go with an identical model as the old one? The power supply is a HIPER type-R series 580 W. I can provide all the technical data if necessary, I just want to solver the problem. I cant really think of any other likely solution as it should work asuming the power suppy isnt the problem. I reinstalled the OS from scratch anyway thinking it might be a software problem.
    Could the problem also be caused by an old BIOS version? Not sure which one I have right now but considering I have never dared to update it, its more than likely an old version.

  • K8N NEO PLATINUM Nvidia nforce 3 250 GB Chipset rebooting - hanging !@$%@#$@

     
    Hi folks,
    I am working on the K8N NEO platinum motherboard based on the Nvidia nforce 3 250 GB Chipset.
    A couple of days ago I lost my internet connection (broadband). After a couple of minutes it ok again. But suddenly the computer frooze.
    After rebooting (button on case) I found out that lots of things couldn't be closed anymore once they were opened. I needed to use CTRL-ALT-DEL to go the the active Tasks. But then that started to freeze too so I decided to wipe everything of the system.
    I repartioned and reformated the computer with the win XP PRO CD and reinstalled the OS. I saw immediatly that the system was slower then before and that it did not found the internet connection anymore. I checked the LAN connection and there it sayed that the LAN card was working well but that no cables were connected. This was not true because I dubbel checked them twice. I even replace the cable. It was not my Internet provider neighter because the computer is in a local network and others had no problem to access the internet. So I decided to reinstall and reinstall it again. I reinstalled the system (partioning, formatting) it 4 times. The last time suddenly it found my connection back. Then I installed all updates of windows and I used my live update from MSI to update my components.
    I am using live update 3 and updated the BIOS and all other parts who needed to be updated. This was done without the presence of a AV and so on. Everything went well and no errors occured. I received everytime a message with success.
    Today my computer suddenly hanged itself again. This already 3 times. Nothing is possible anymore except the boot button on the case.
    I also encountered 3 times the while surfing the computer suddenly reboots itself without any warning or message.
    What the hell is going wrong here ???   
    Can aynone give me a clue please ?
    Is the motherboard dying ?
    MSI live bios Version 3.7.000
    MS-7030(K8N Neo Series / K8N Neo platinum)
    BIOS version 1.7 (latest version)
    Award bios release
    2005/05/10

    Charly.P
    Russ_xp  was asking about the Max amps on your power supply should be on label like this:-
    Need yours - 3.3v= ??A.5v=??A,12v=??A
    luck

  • MSI K9N SLI V2 nForce 570LT 64 Bit Driver Problems

    System Specs
    X2 4400+ 2.3ghz
    8800GT 512mb GPU
    250gb HD
    4x 1gb G-skill pc6400 DDR2 800
    MSI K9N SLI V2 nForce 570LT Socket AM2
    vx450w PSU
    Lite-on DVDRW LH-20A1S
    So I recently jumped ship from XP Home to Vista x64 to XP pro x64 and I am having issues updating my drivers I downloaded the MCP55_64_9.17_MW31006 at this site http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1415
    NVIDIA nForce 550/570/570/590 SLI System Drivers
    When I run the install though nothing happens Nvidia splash then nothing and the files are not recognized by the device manager.
    Any idea what the issue could be? sadly need the ethernet update so I can connect to the internet lol also the 2 discs have no effect neither work vista or the xp (tried vista since the x64 drives actually worked on it)

    Vista x64 ultimate. I wanted to try X64 XP but I ran into problems thus the original post ^-^
    Vista is nice I could live with it for Dx10 but man UAC sucks every attempt to disable = vista freak out and repair the file ^-^
    ATM I use XP Home with the DX10 crack (I own vista so I don't see a issue) but yet to install any games on it. I will load up and check it out   Still the fact I get medium with x8 aa is good imo. Game looks fantastic and with luck the FC2 engine won't be such a resource whore like crysis. I recall the Sandune (think thats the name) for FC1 even on low settings things still looked fantastic.

  • K9N SLI Platinum operating system problems

    I have a MSI K9N SLI plat MB, an AMD 64 x2 4200 cpu, a EVGA nvidia 7600GS video card and 2gb mem.
    My problem is that I am unable to get windows XP, XP64, or Vista to run on my IDE hard drive.
    I am running XP from an SATA HD and it works OK. I have a CD/DVD and IDE HD on the IDE controller.
    Updated BIOS to 1.3, no help.

    Quote from: don_mccarter on 24-August-06, 14:16:44
    I have a MSI K9N SLI plat MB, an AMD 64 x2 4200 cpu, a EVGA nvidia 7600GS video card and 2gb mem.
    My problem is that I am unable to get windows XP, XP64, or Vista to run on my IDE hard drive.
    I am running XP from an SATA HD and it works OK. I have a CD/DVD and IDE HD on the IDE controller.
    Updated BIOS to 1.3, no help.
    ==============================
    Trouble here too
    My system bit similer to your one:
    MSI K9N SLI Platinum
    AMD Athlon64 X2 4200
    2x 1Gb Kingsten DDR2 Dual Channel
    2x 256Mb nvidia 7600GS on SLI
    1x 160Gb SATA HDD
    1x 250G  SATA HDD
    1xDVD Rom
    1xDVD-RW
    750W Thermaltake Toughpower PSU
    The problem what I'm getting is when I'm try to burn a DVD or CD... my PC shuts like you unplugged your power (not restarting)
    first I thought something wrong with my DVD burner then I tried with a new one(had ASUS one now having LITE-on).. but still happening.. I have update the BIOS v1.3 as well..but didn't do any changes.. My DVD-RW connected to IDE controller.. that's only thing controlled by IDE.. don know how to fix this... I'm sure it can't be the PSU.. I changed my PSU 500W to 750W because of this matter.. I guess something wrong with the IDE controller.. only MSI can fix this... I'm waiting for a reply from them... :(
    Kamal

  • K9N SLI Platinum - RAID 0 problems

    Hi everyone,
    I've just assembled a new pc with a K9N SLI Platinum (PCB Ver: 1.1; BIOS Ver: 1.3), 1GB (2x512MB DIMM1 & 3) Kingston KVR667, 2 Maxtor SATA-II disks, GF 7300GS with 256MB DDR2.
    I'm able to install windows with one disk but can't do it with both disks setup as raid 0.
    I've tried both Sata Raid Driver from cd and from MSI website.
    With the driver from the cd windows setup finds the raid and starts installation, but freezes somewhere (totally random) without finishing.
    With the driver downloaded from the website windows setup can't find the raid.
    Any hints?
    Thanks

    Quote from: manuelmont on 25-September-06, 07:13:09
    I tried once again to install windows and this time setup finished successfully and the computer boots from the raid. So my first question: what is the relation between the bootable option at the raid setup and the fact that the system booted without it?
    I doubt that the removal of the floppy from the bootable devices list has anything to do with the successful install...
    Well if it is grayed out in the RAID setup is because it is already Bootable, as for the removal of the floppy from the bootable devices, there are things that only the gods of the computers know...
    Quote from: manuelmont on 25-September-06, 07:13:09
    Everything seemed to work ok but the computer started to freeze once again during installation of other software which made the system unstable.
    Then I replace the graphics card with an ATI X300 (just for testing) and the system became stable. I installed software, played some games without problems. As the GF 7300GS I removed works on another pc this seems to be some compatibility problem between the MB and the GF (turbocache?).
    I used Sisoft Sandra 2007 Lite to test/benchmark the system. All the tests were almost normal (except memory - benchmark showed values a bit lower than I expected!) but I could not run Physical Disks Benchmark module neither Physical Disks Hardware module (but could benchmark the file system). What does this mean?
    The disks are in fact DiamonMax 17 (6G160E0) but I'll try another brand as well, these are the only disks. On the IDE channel I only have one dvd recorder.
    Your PSU has way to low amperage for that system, the test is the change you made from a superior GFX to a lower end one, the NX7300GS eats alot of amps in comparison to the X300, and it does not have nothing to do with the TurboCache feature.
    As for Sisoft Sandra I don't use that "I'm a potty mouth" (pardon my french ) I use Lavalys Everest or for disks HDtach, and others.
    You could not test the physical disks because they are in RAID mode, but you can test or benchmark the logical disks because they are the partitions you created in the physical disks and are divided by the 2 disks, half in one half in the other...
    I hope this will shed some light into the questions...
    Be well....

  • K9N SLI Platinum MS7250 ver1.1 ... need help with Windows 7 install

    Hello,
    Having an intermittant issue with Windows 7 32bit.  During startup Windows 7 gets stuck at the logo screen.  Not always though.  Every 7-8th reboot it will make it past and go all the way into Windows 7.  I've tried all sorts of combinations of "ebabling/disabling".  This system ran XP professional for 3 years without any issues.  Currently, I have the most luck by connecting the keyboard and mouse to PS2 and leaving USB disabled.  This may not be the issue though.  Once I got Win7 to boot I performed driver updates etc. 
    If someone has suggestions please let me know.  I'm about to try the USB bios flash but have never done it before. 
    Thank you,
    BK
    CPU:   AMD 64 x2  5000+
    RAM:   4GB Patriot Viper Series  -- set to 2.1V per specs, 800MHz, setup in Dual Channel mode
    Video:  NVidia GeForce 7900GS
    PSU:    600Watt  CoolerMaster ATX12V   12volt rails push around 18amps and I'm using the additional power port for power to the video card
    Bios ver:   1.3  (this is what shows on the splash screen at startup however CPUID shows 080014 - not sure what that means)
    Motherboard:  K9N SLI Platinum MS7250 ver1.1

    Hi Guys,
    Thank you for the replies. 
    -  Yes it is a fresh install of Windows7 on a drive that originally had XP Pro
    -  If I boot into safe mode it does go into Win7 most of the time. 
    -  I posted on the MSI tech support page (http://support.msi.com/index.php) and the response was to upgrade the BIOS.  What do you think?
    -  I've been using this graphics card for three years and is nowhere near as powerful as what's out there now.  In fact all of the components are three years old except the RAM
    -  I tried the old RAM (2GB Corsair) and it also had the same issue.  Even at default RAM settings or otherwise.  Now I'm back to the 4GB Patriot Vipers.
    -  What is this capacitor problem people are referring to?  Is it a problem specifically on this model board? 
    Thank you..
    BK

  • K9N SLI PLATINUM low data transfer rate

    Hi, (sorry for my pour english) I had to go back to Winxp native SATA/IDE drivers and my pc crash & BSOD problem it's gone! :D (BSOD when i install some programs or some games, listening music and moving data at the same time, etc.) now i'm available to execute multitasks without any troubles. But now the transference it's quite poor  , I think this is an easy and temporary solution for this big problem.
    I bought my PC on 2006 and the Windows XP drivers are from 2001, aren't new Nvidia/MSI drivers to fix this annoying problem?
    Thanks.
    AM2 3800+ X2
    MSI K9N SLI PLATINUM, bios 1.4
    2 x 1GB OCZ DDR2 6400 Platinum
    PSU PowerCooler 550w
    HD WD3200 SATAII
    NX7900GT

    I've got nearly the same problem, but a little worse. My data transfer rate seems very slow for a 100mb network and if I start copying files over the network, after only a couple of megs I lose connectivity to the network completely! I've removed the network cable and windows notices this, and when I put it back in windows also notices the change, but the green and orange lights on the port itself stay on solid. If I reboot windows everything comes back. I don't have problems browsing the web, seems to only happen when the ethernat port is running close to full load (for the connection speed of 100mb as apposed to 1gb).
    Anyone else seen this? I'm on the latest drivers, the latest bios and I've tried disabling on of the network ports in the bios but his didn't work.
    Kevpatts

  • K9N SLI Platinum Power off issue when burning CD/DVD

    MSI K9N SLI Platinum
    AMD Athlon64 X2 4200
    2x 1Gb Kingsten DDR2 Dual Channel
    2x 256Mb nvidia 7600GS on SLI
    1x 160Gb seagate SATA HDD
    1x 250G  seagate SATA HDD
    1xDVD Rom
    1xDVD-RW
    750W Thermaltake Toughpower PSU
    The problem what I'm getting is when I'm try to burn a DVD or CD... my PC shuts like you unplugged your power (not restarting)
    first I thought something wrong with my DVD burner then I tried with a new one(had a ASUS one and switched to LITE-on).. but still happening.. I have update the BIOS v1.3 as well..but didn't do any changes.. My DVD-RW connected to IDE controller.. that's only thing controlled by IDE.. don know how to fix this... I'm sure it can't be the PSU.. I changed my PSU 500W to 750W because of this matter.. I guess something wrong with the IDE controller.. only MSI can fix this... I'm waiting for a reply from them  ... Please post if you having the same problem..thx

    HEY GUYS FINALLY GOT A ANSWER FROM MSI Co.
    According to this best thing is RMA..
    Dear Kamal,
    We have fixed this issue by changing C565 from 100pF to 220pF. All the stock had been reworked, and we have informed all the MSI™ Distributor locators.
    So please get your MB for RMA.
    As to the RMA, The normal procedure is to contact your reseller (the place you bought the board from) for repair/exchange , If the reseller for some reason like bankrupt cannot be contacted, then contact MSI distributor http://www.msi.com.tw/program/contact/where2buy/ or MSI office near your place http://www.msi.com.tw/program/about/w2b/index.php
    Sorry for any inconveniency.
    Best wishes,
    MSI Technical Support Team

  • MSI K9N SLI-2F+4GB DDR2 big problem....

    I got this PC:
    MSI K9N SLI-2F
    AMD Athlon64 x2 4200+
    2x1 GB DDR2 Vitesta Extrema 800+
    WD 500 GB AAKS
    LEADTEK 8800 GTS 640 MB
    450 W PSU
    Recently i got another 2x1 GB DDR2 Vitesta Extrema 800+.My OS was Windows XP SP2.Of course i knew about de 32bit SO limitation and didn't expect my Windows to take advantage of all 4Gigs.My PC started to freeze on random ocassions.so i decided to install Windows Vista x64.It didn't start to install it just freezes after unpacking (gray bar with black background screen).I take out 2 Gigs.Works like a charm,so it isn't a dvd read problem. I inserted the 2GIGS back PC doesn't even get to boot screen(with 2GB works).I installed SP1 too,to get all hotfixes up to date.same thing.Memory hole is enabled in bios.Tested the sticks 1 by 1 no problem with eighter of them.Just as i write i am running the recently bought sticks,for 2 days,no problem.My bios is 3.8 now,but i downgraded from 3.9 thinking it may solve the problem.I also don't think that the PSU is the problem,because before i had 4x512 DDR2 800 GEIL Ultra (2.1V) wich practicly need same power to run.Hope somebody can help me :(

    Quote from: Bas on 26-March-08, 22:01:33
    You have tested with all sorts of el-cheapo PSU's.
    Do you really believe any of those will run a power eating videocard like a 8800GTS?
    I believe it's the videocard and/or the powersupply.
    As you managed to install XP without a problem it seems, well then the memory and CPU are fine, as they use a whole lot of memory and CPU power during install.
    It would have stalled during installation as well if it was the board/CPU/memory.
    However, during that stage the videocard isn't initialized to full potential, but just acting like a 100 year old VGA card and thus not using any power or GPU calculations at all.
    Please test your system on a >30A @ 12V powersupply SINGLE rail, to exclude the PSU.
    Also, take your friends videocard and put it in your system, but with a heavy 12V amp psu.
    Wouldn't be the first time it was both.
    Bad memory/CPU/board usually results into BSOD, but underpowered PSU can also cause freezing and those nVidia videocards do react on unstable power by reducing stuff....so yes it can run underpowered...but how long and how good?
    BAS, thanks but no thanks.Already solved,and it wasn't the PSU, you PSU FANATIK ).I already said i finished Crysis with this stinky PSU ,no problems.Go buy a PSU that costs twice your PC if that makes you happy,untill proven otherwise i stick to my cheap'o PSU

  • K9N SLI Platinum reboots while playing games

    Hello,
    System config
    Athlon 64 3800+ x2
    K9N SLI Platinum (Bios version 1.1)
    2 * 1024 ocz 6400 gold memory
    80 gig sata 1 drive
    nec dual layer burner
    Xfx 7600 gt xxx
    floppy
    PSU Coolmax AP-450 (CX-400)
    The system is stable when I browse email and such, but as soon as I play games I'm getting reboots. Blue screen of death a couple times. I bought a couple more fans for my case (waiting to see if it makes a difference when it arrives). It may be getting to hot. I have been reading and perhaps the PSU is not good enough or compatible. I haven't checked the memory yet, But i would think that it would reboot consistantly not just in games if that were a problem. Does anyone have a solution for me?
    Thanks,
    LTBob

    Quote from: eddie_g on 19-July-06, 19:06:28
    I had the same problems as you have.
    The fix I did was, downloaded the drivers for AMD dual core processors from the AMD website.
    Make sure you have your RAM set to 2.1V.
    It's nothing to do with the PSU.
    "It's nothing to do with the PSU."
    cant agree, there is alot of issues with the same symptoms. it may crap or overload PSU also.

  • P6N Platinum, Problem with SLI

    Hi
    I'm newbie...
    I have problem with SLI, maybe Drivers isn't good for Sli...
    My Specs:
    Core 2 Duo 4300
    Zalman 9700 NT
    Msi P6n Platinum 
    Mem 2x1GB OCZ Reaper HPC PC6400,  DDR 2 800
    XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
    Evga Geforce 8600GT (normal) Core 540/1400
    PSU Corsair 620 HX
    Maxtor 160gb SATAII DiamondMAX
    I just install the driver Forceware (Version 163.63_whql) and i cannot using SLI.
    Later I just uninstall my driver 163.63 and Driver Cleaner for uninstall all driver nvidia, (ALL CLEAN).
    So I just install the driver Forceware (Version 163.71_whql) and Finish Installer and restart my system.
    Boot Windows XP, and Show that i have mode SLI CAPABLE.
    I just enable SLI and apply, suddenly Shut down my computer and turn on again, boot post and loading windows xp.
    It's no activate SLI yet 
    What is wrong?
    My system:
    *** NO OVERCLOCKER, ALL DEFAULT
    *** No UPDATE BIOS.
    *** VERY STABLE, but no working SLI...
    I have two card, is same model 8600 GT.. but different core and memory.
    First PCI-ex  is XFX Geforce 8600GT XXX
    Second PCI-ex is Evga Geforce 8600GT
    Question:
    Which is the best drivers for capable SLI?
    Help, for Enable SLI...
    Thank you

    Quote from: Abraham55 on 11-October-07, 01:11:46
    I did, i put SLI Switch Card : SLI MODE, 8x + 8x
    I can see two video cards, (each video cards have 8x)
    So when i want enable SLI MODE, and apply, suddenly SHUT DOWN MY COMPUTER..
    Make sure power cables are connected to the each one.(if they have).
    "XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
    Evga Geforce 8600GT (normal) Core 540/1400"
    If no change try with 2x matched VGAs...

  • K9n SLI Platinum + 4x1GB = Cold

    Got som problems running my K9n SLI platinum with 2x VS2GBKIT667D2 (= 4x1GB dimms)
    With 2x1GB DIMMs , it works fine, in any DIMM slots.
    But when i put in all 4 of them I got Major Freezing problems.
    Memtest86+ works fine.
    But in XP it freezez, in Vista it freezes.
    Trying to install Vista with 4GB it freezes before the installation program even starts..
    Any helpfull thoughts?

    V-ICE, there are at least 3 more people (myself included) who are having this "HT sync flood" error. All of us have K9N motherboards with V1.7 BIOS:
    - K9N SLI Platinum + BIOS 7250v17 (V-ICE)
    - K9N SLI Platinum + BIOS 7250v17 (TomMe)
    - K9N4 Ultra-F + BIOS 7310v17 (zzkey)
    - K9N Platinum + BIOS 7250v17 (Grawp)
    I think there is a problem with those BIOS versions. I've had 3 K9N SLI Platinum boards, never had that error before. Only with my latest board + v1.7 BIOS.
    Have you had any "overclock failed" messages so far?

  • Need to buy a MSI K9N SLI Platinum I/O Back Plate, But where ?

    Where can I buy a I/O back plate for a MSI K9N SLI Platinum Motherboard in the Uk online 
    I've looked on ebay, but most are standard design,,, have email MSI, but no reply so far 
    Thanks for any help.......
    Regards
    NC ........

    Quote from: nuttycomputer on 25-April-07, 19:40:40
    Russell.......
    Rang MSI in the UK and they gave me an email address:
    [email protected]
    And they emailed me back with the following message:
    Hi,
    We have in stock E21-7030012-A91 and we will send you the item free of charge.
    Please provide full delivery address.
    Best Regards,
    MSI (UK) Returns Department
    (non-direct customers)
    UK - www.msicomputer.co.uk
    HQ - www.msi.com.tw
    Thanks Russell for your help !! 
    No problem, I'm glad I could help.
    They are a great bunch of guys, last time I called we ended up talking for almost a hour, about various things
    Russell.

  • Vista Beta 2 (v5472) + K9N SLI Platinum

    Has anyone managed to get Vista installed from scratch with the "K9N SLI Platinum"?
    I tried, 32bit and 64bit. both failed.

    I got Vista Beta 2 32-bit installed on K9N Ultra + 4200+ X2, but because of the poweroff-issues of K9N-series, Vista was really unstable. Well, my mobo is RMA'd now, so let's see how's gonna work with the new revision.

Maybe you are looking for