Suspended install of CS6 during power outage

Hi, we were installing CS6 from disc when there was a power outage in the building that affected the Mac in question. We were installing CS6 professional and not CC. Installation of CS 6 was suspended due to the power outage. Since then we have been unable to restart installation for CS5 or CS6. We encounter an non-descript error: Installer failed to initialize. Download Adobe Support Advisor to detect problem (ASA has been discontinued). Same error for both CS5 and CS6.
Adobe FAQ/Troubleshooting recommended uninstalling CS6 and CS5 and then running Adobe Creative Cloud Cleaner Tool (v 2.6.0.4). This was done but still no love.
I checked for Adobe installation logs and the PDApp logs and they are gone. Nada.
Mac OS 10.8.6
We're down to wiping the Mac and starting over. Users not happy. Revolution possible.
Any thoughts?
Many thanks in advance.

Mea culpa...the Adobe install logs are there but the PDApp logs are gone.
The install log for Adobe CS6 is incomplete. Rather than ending with summary information, the log ends "END InstallOperationsQueue Ordered operations".
There is no summary, no fatal errors, no recorded errors.
Unlike the CS5 install logs, the CS6 install log file ends with .log rather than .gz (not sure if that's important or not). The Adobe log analyzer has been discontinued (http://www.adobe.com/go/loganalyzer) and it routes users back to Customer Care.

Similar Messages

No Internet during power outage - Isn't the battery in the NTU supposed to keep the circuit up?

During yesterday's power outage in Northern Virginia I lost all Internet connectivity; yet my NTU battery was up but my Verizon router was saying the cable wan was down. Why?
Isn't the NTU battery supposed to keep the circuit up in case of power failure? if is not, why did I spend $30 replacing it when it failed since Verizon is too cheap to replace it, even though we all pay them those outragous bills every month.
Why, Why, Why
Solved!
Go to Solution.

Vuser wrote:
During yesterday's power outage in Northern Virginia I lost all Internet connectivity; yet my NTU battery was up but my Verizon router was saying the cable wan was down. Why?
Isn't the NTU battery supposed to keep the circuit up in case of power failure? if is not, why did I spend $30 replacing it when it failed since Verizon is too cheap to replace it, even though we all pay them those outragous bills every month.
Why, Why, Why
No, only the phone circuit, for up to 8 hours, if you have phone service. Although my experience is that the battery does power the internet and TV service for a short time to cover a brief power outage.
As to why you paid $30 to replace the battery, I have no idea, you can generally get batteries locally or from Amazon, etc. for $15 to $20. And it is very clearly stated that the battery is your responsibility, you should have already known that.
If you feel FiOS too expensive, why do you have it?
Justin
FiOS TV: Extreme HD, Internet: 50/25, Digital Voice
VMS Enhanced Service: 1 server, 2 clients
Keller, TX 76248 (VHO 1)

Apple tv was working fine until power outage. Now stuck on Computers and Settings Icons. Cannot get back to normal function.

Apple TV was installed and functional until power outage. Now I am stuck on Computers and Settings Icons and cannot get back to normal operation. Can get to settings which I have tried many times. Any thoughts?

Happened once to me also following a nasty storm
One of the 2 things worked for me (can't recall which):
1. Power down everything. UNPLUG your apple TV and whatever it's connected to, including the power cord and the HDMI cable (disconnect at both ends) Wait a minute or two.
Reconnect everything: Restart.
2. Totally Reset the Apple TV (this is more work since you'll need to add all your settings)
Whatever worked: My Apple TV resurrected itself (unfortunately can't say the same for my DVD player).
3. Lastly, the timing of the storm could be a cooincidence - this happened to someone else here (no storm invoived) and it turned out to be a temporary outage at Apple. see this: https://discussions.apple.com/message/18027331#18027331
For the future, if you've grown paranoid...
I always unplug my computer for heavy storms (on the advice of a techie at power protection company), But These days, if a storm is really severe (or very extended) I also unplug my AV equipment. the The ATV is chump change compared to the cost of my other components - but I've grown really dependant on it.
Remember: Surge suppressors will take the first hit, but often that's it, their circuitry can then get blown. Also if you do unplug power, Unplug power for everything (very easy by connecting everything to a Surge suppressor) just don't forget RF Cables or ethernet cables (If you leave your router connected).
Personally, I leave my router on, and am willing to rebuy if neccessary, in order to at least access my laptops, and iPad. BUT this means I have to unplug the ethernet cables.
Good luck, doubt your ATV is toasted if anything comes up.

During a power outage, my mac was on and when it came back on, it was reset. No pictures, documents, etc. How can I fix this?

My mac was on during a power outage, and when I turned it back on, it was reset. I cannot find any of my pictures or documents. I would really like to fix this on my own. Does anyone have any ideas? The memory seems to be cleared.

There may be no fix. The outage may have caused a damaging electrical spike.
Try this first:
Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work, then try this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it isthree times faster than wireless.
If this doesn't work then:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Power outage during 5.0.1 download possible to do clean reinstall?

power outage during 5.0.1 install. Now No iTunes purchased tv shows or movies will sync to touch. Error that video format not supported. They all synced and played fine before the new iOS. I have reset & restored with no success. Anyway to reinstall 5.0.1?

Hi, Toonz! Rather forgetful of me not to include the 1301, I tried another installation earlier & it popped up first, that's when my memory got a big jolt. Anyway, I figured the an uninstall/reinstall was probably going to have to be done. That's on the agenda for today, I was just hoping to get out of it. I assume that the Cleanup Utility should be run on both iTunes & QT in the list, once the uninstall is done?
Thanks for checking in,
Debbie

Photoshop fails to run or re-install after power outage

I experienced a power outage while performing an update to Photoshop via Creative Cloud on my iMac. Since then I have been unable to use or re-install the app. Initially when trying to re-install, Adobe Application Manager would run through most of the install process and then error out towards the end, stating that the download was corrupt. This happened twice, and now after several reboots I no longer have the option to un-install on the Adobe sub-menu. Other Adobe apps seem to function without issue.

Run the Creative Suite Cleaner Tool, download AAM from here:
Adobe - Adobe Application Manager : For Macintosh
Reinstall everything.
Mylenium

Power outage during incremental. Time Machine "lost" Time Capsule

I had a power outage during an incremental backup and got a "delayed" message. "No big deal" I though since I figured it'd backup once the power came back on. it did and an hour later I noticed i still had "delayed." I forced a backup with "back up now" and nothing happened. Opening the preferences showed the backup had "failed" and a backup disk was not associated with Time Machine. I selected the TC and all was well.
This begs the question of whether this is a bug or not. If TC + TM is supposed to be "set and forget," power outages should no cause this type of behavior. Had I been less "techie" I might very well have gone weeks in the this situation.
Anyone else notice this?

Any thoughts? (If the above is unclear, say so and I'll edit it )

865PE Neo2-PFISR problems after power outage

I need some help with a problem. A recent power outage while my supposedly "surge protected" 865PE Neo2 based machine was running, apparently messed something up. After our power came back on, I powered it back up and discovered that I now have 4 ongoing problems. Problem 1) it now hangs twice during the boot process, once at "auto detect 3rd master - press escape to abort", which if I then press ESC, it then moves to "auto detect 3rd slave - press escape to abort" and hangs there until I press ESC, at which time it then finishes booting like normal. (by the way, I don't even have any 3rd master or 3rd slave installed) Problem 2) I can no longer enter the Bios setup, even though I press the DEL key at the appropriate time. Problem 3) The case light for hard drive activity stays on constantly, even though the drive seems to be working normally without any other problems. Problem 4) A few issues here. My sata dvd/cd combo drive is no longer recognized as being installed; the activity light on the drive is constantly on even though the drive is not running; the drive bay will no longer open.
I'm guessing that something has possibly been damaged on the motherboard or maybe the bios was affected somehow, or maybe the power supply was somehow damaged. Either way, I'm not sure what to do now. With the exception of the problems I listed, my system otherwise works normally as it always has, with the only real downside being that I don't currently have a dvd/cd drive. I haven't tried any troubleshooting myself because I'm not sure where to look or what to look for. The specs for my system are listed in my signature, with the only change being that I'm still running the original Antec 350w power supply that came with the case. I could sure use some expert advice and help with this.

Problem Update.
Well, I finally got my machine up and running "almost" as good as it was before my power surge problems. Thank you to everyone that responded with advice. I ended up replacing the Antec 330w TruePower psu with the new Enermax Noisetaker 420w (EG425P-VE SFMA V2.0) that I had, and I had to replace the MSI sata combo drive (went with a Pioneer 710 DVD-RW, which is an excellent unit) and now things are back to normal. Plus, I bought an APC 650VA/390watt battery backup with soft shutdown to help prevent any power outage problems again.
When I said "almost" as good as new, that is because this morning when I booted up, all I got was a black screen (no post) for a couple of minutes, and then a message appeared that approximately said "the dram timings are too tight, reload timings", or something like that. Well, since the timings have never been changed, I'm not sure what is going on, but after turning it off and then re-powering it up again, it booted (though slowly at first) and I've just been letting it run all day. Ha, just when I was ready to venture into OCing this rig. Think I will anyway. If the problem continues, I'll be back seeking helpful advice again.

Mac Mini wont start after power outage, and problem copying iPhoto library. HELP!

    So, recently there was a power outage in my neighborhood, the power was intermitent for about 2 hours, during this time my mac rebooted itself several times, but on the second time it rebooted the power went out during boot, then the power finally went out for good, it was back in about 3 hours, but when i finnaly turned on my mac it got stuck at the Apple logo with a spinning wheel and a progress bar that wouldnt go past 40%, when i boot holding command -v it said that there were a lot of errors which were automatically fixed, except for one, "Incorrect Thread records" or something like that.
    I have another partition with Mountain Lion installed for emergencies, the other one with Lion became inaccessible to mountain lion or any other OS X version, but oddly enough, I can access my Lion partition via HFSexplorer and see all my files untouched.
    My main concern are my pictures in iPhoto, and thats about 36Gb of data, I want to backup them to my windows pc by copying the whole iPhoto library package, but HFSexplores for some reason cant copy the folders with date (XX/XX/XXXX) with the /, and it keeps changing them to XX_XX_XXXX and I know that would pretty much break my iPhoto library!
I googled my drive problem and people said that I need a Disk Utility called DiskWarrior, but I cant seem to find how to to use it, I got a copy from a friend, it was the digital version of the boot disk which need to be burned to a dvd.
Any help would be appreciated, and sorry for the bad english

OK, we need more info about your Mac. Do you know how much RAM it has in it?
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

Hyper-V - virtual machines don't start automatically after power outage

Hi,
I have a HP server running Windows 2012 R2 + Hyper-V. On this server, four VM have Windows Server 2003 R2, and one VM has Windows 2012. After power outage, 1 2003 R2 VM and 1 2012 VM are started properly, but the other three machines aren't. I've started
it manually. All VM's have last version of Hyper-V integration tools installed, the option "Automatically start VM if it was running before the service was stopped" was chosen. I'm not very familiar with Hyper-V, so, I've investigated only Hyper-V-VMMS
event log. There are some recurring errors:
The Integration Services Setup Disk image could not be updated: The process cannot access the file because it is being used by another process. (0x80070020).
and
Failed to get the disk information.
But I think it isn't a clue.
How can I clarify, why these machines aren't started automatically?

Hi EugenBerend,
Maybe it is related to system resources allocation during the start up .
I would suggest you to configure a startup delay for those lower priority machines so that system
can locate enough resource for them.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NVG589 RG low battery light blinks after power outage

ATT installed a new Motorola NVG589 RG about a week ago.After a power outage today, the low battery light keeps blinkingMeanwhile, an ATT automated call keeps calling my Uverse home phone telling me to replace the battery.Now, my Uverse phone has a low battery so I can't make any calls.It must be due to the low RG battery.I can't even call ATT (for some reason my cell phone is not working either) to get their help.The DSL is still working (so far).I see that the NVG589 has a battery.Do I need to replace that myself? (If so, where do I get a cheap one?)It must have been a bad battery to only work for a week. Is there a warranty?I appreciate any advice you can send my way!Thanks a lot!EG

There may be a short (30 day) warranty on the Backup Battery, it would not hurt to ask. Normally, though, you're responsible for replacing an exhaused backup battery.
Since the backup battery is designed to support the phone side of the RG during a power failure, it could be that the failure of that battery is causing an issue. You could, for the time being, remove it and see if that helps with your U-verse Voice problem. I doubt it's affecting your cell phone.
In your shoes, I'd click this U-verse Customer Service link to send a Private Message (PM) to the AT&T customer service team to help you resolve your U-verse Voice and Battery issue. You can expect a reply via return PM (the blue envelope in the upper right hand corner of this site, next to your name and avatar) in a business day or three.
This is a group of U-verse service specialists who are knowledgeable about U-verse and will stay with your problem until the end (instead of forgetting about it when the phone hits the cradle). Speed things up by including your Billing Account Number, and the best time and way to reach you.

Unable to load OS bound to a domain after power-outage

I currently manage 200 2013 iMac but since installing Yosemite I've noticed that after the macs are joined to the domain and a network user is using the machine and a power outage occurs ALL iMac running Yosemite will not boot up. The boot process reaches about 30 percent and stays on the grey apple logo screen. After extensive troubleshooting we found that this only occurs when a user is logged in when the power outage occurs. However if the power outage occurs and the units are not being used by a network user the computer boots up fine. We completed a fresh install created a local user without adding it to the domain. We then logged in with the local user mimic'd a power-outage and the computer booted up fine. I have done extensive troubleshooting noticed that the issue does not occur with local users only users authenticated on a domain.
Note: We also noticed that if we deleted network users from the user folder and then performed the power outage and the unit loads the OS fine.
Any help with this is greatly appreciated...

Insert the Mac OS X 10.4 installation disk into the drive, and then restart the computer with the Option key held down. If you are able to successfully start up from the drive, install Mac OS X 10.4.
(22892)

After a series of very short power outages in my town our Imac boots with the pinwheel going and a progress bar, then the users screen comes up but our passwords no longer opens up desktops, just returns to the users choice screen. What should I do?

I'm on the choose a user screen and when I enter the password the screen goes white then returns to choosing a user. The system is rebooting differently when I tried turning off then back on, the pinwheel screen has a progress bar and it takes minutes instead of seconds.
what should I try?

You can try an SMC reset, especially if there was a power outage.
http://support.apple.com/kb/HT3964
If the issue seems like it just doesn't want to accept the password you'll need to boot to the install disc/recovery partition of the hardrive by holding the 'option' key while booting up. There should be a utility in there to reset your password.

Time Machine won't recognize my last backup after a power outage

Good Afternoon Everyone,
I just set up a Western Digital My Book Live on my network. Last week, I set up Time Machine to start a backup on my MacBook Pro (running 10.7.5). It took 2 days to finish, but all went well. For three days, all the backups worked perfectly. However, we had a power outage for an hour during the night and now that I turn on my MacBook Pro, Time Machine recognizes the disk, but doesn't have a record of any backup.
I have gone to the drive manually and seen that the files are still there, but how to I tell Time Maching on my MacBook that the full backup is already on that NAS drive, so that it won't do a full backup?
I would really appreciate the help.
Brett

TM apparently identifies the machine's backup by the Computer Name stored in the Sharing preferences. Try opening Sharing preferences and changing the Computer Name to the one you used previously when your TM backup was created.
Also see:
Time Machine Troubleshooting
Here are several articles to help troubleshoot Time Machine Problems as well as assist in properly setting up Time Machine.
Mac 101- Using Time Machine in Mac OS X 10.5 Leopard
Is Time Machine all you need?
Some advice for those using Time Machine
TidBITS Macs & Mac OS X- Time Machine- The Good, the Bad, and the Missing Features
Mac OS X 10.5- Time Machine backups are not visible
OS X 10.5- Time Machine stops backing up to external disk
10.5- Disable the 'use this disk?' Time Machine dialog
Time Machine tips and troubleshooting
Mac OS X 10.5 Help- Restoring files backed up with Time Machine
OS X 10.5- Using Time Machine and troubleshooting Time Machine issues

Can't install Photoshop CS6 64bit on Window 8

i can't install photoshop cs6 64bit on window 8
Below is my computer spec
THIS IS MY ERROR
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 44 warning(s)
WARNING: DW066: OS requirements not met for {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0
WARNING: DW066: OS requirements not met for {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0
WARNING: DW066: OS requirements not met for {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1
WARNING: DW066: OS requirements not met for {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
WARNING: DW066: OS requirements not met for {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0
WARNING: DW066: OS requirements not met for {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0
WARNING: DW066: OS requirements not met for {99290358-A784-4218-A7BA-954AE5F9207C} AdobeCMaps x64 CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {9AB0EFC0-AC6B-11E0-9E61-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x86) 6.0.2900.2180
WARNING: DW066: OS requirements not met for {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {093DEFC4-542D-4D0A-8162-0592055515F4} Adobe XMP Panels 4.0.0.0
WARNING: DW066: OS requirements not met for {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148
WARNING: DW066: OS requirements not met for {CFC3110A-491C-4DBF-A97D-66C567600A2F} Photoshop Camera Raw 7 7.0.0.0
WARNING: DW066: OS requirements not met for {246C4B99-19F7-4475-9787-5FF8595B86D7} AdobePDFL x64 CS6 10.9.0.0
WARNING: DW066: OS requirements not met for {B2D792AF-F407-4EFA-9A03-3F2A476146F6} AdobeTypeSupport x64 CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1
WARNING: DW066: OS requirements not met for {55F0AFED-606D-476A-A07A-134291002FBA} Photoshop Camera Raw 7 (64 bit) 7.0.0.0
WARNING: DW066: OS requirements not met for {1F955A4A-F365-4379-AEE2-B7C83E1AA883} Adobe Photoshop CS6 Support 13.0.0.0
WARNING: DW066: OS requirements not met for {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {51C77DC1-5C75-4491-8645-A17CC33F5A36} AdobeColorEU CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {26F763C9-076F-473D-9A0E-4050C973737C} AdobeColorJA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {BB66788C-4C4F-4EB0-B146-9178857DE287} AdobeColorNA CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0
WARNING: DW066: OS requirements not met for {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0
WARNING: DW066: OS requirements not met for {0377892E-FCAC-46EC-AA70-C6AC8A86A81F} Dynamic Link Media Server 1.0.0.0
WARNING: DW066: OS requirements not met for {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0
WARNING: DW066: OS requirements not met for {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0
WARNING: DW066: OS requirements not met for {B98E0DCB-1A75-4394-9813-3A114AA3891D} Adobe Mini Bridge CS6 2.0.0.0
WARNING: DW066: OS requirements not met for {EFBC1075-F890-4293-A0D1-04BE66EE2AB3} Adobe ExtendScript Toolkit CS6 3.8.0.0
WARNING: DW066: OS requirements not met for {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0
WARNING: DW066: OS requirements not met for {29DB26AB-81CE-41D6-B0C9-BE15E36C87C6} Adobe Hunspell Linguistics Plugin CS6 x64 1.0.0.0
WARNING: DW066: OS requirements not met for {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0
WARNING: DW066: OS requirements not met for {99FE4191-AC6B-11E0-B602-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x64) 6.0.2900.2180
WARNING: DW066: OS requirements not met for {8085C16A-3148-40B4-BC8B-12ED59C9C478} Recommended Common Fonts Installation x64 2.0.0.0
WARNING: DW066: OS requirements not met for {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0
WARNING: DW066: OS requirements not met for {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0
WARNING: DW066: OS requirements not met for {00496505-D56B-4B07-A8C5-70A0B4E689F7} Adobe Bridge CS6 (64 Bit) 5.0.0.0
WARNING: DW066: OS requirements not met for {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} Adobe Photoshop CS6 Driver 13.0.0.0
WARNING: DW066: OS requirements not met for {3289C0E8-78B9-47D4-98E5-F25BFF1CBED4} Adobe Photoshop CS6 Core_x64 13.0.0.0
WARNING: DW066: OS requirements not met for {29A80A19-9E35-455A-AF9D-B39AE5B3035D} Adobe Photoshop CS6 English Language Pack_x64_AdobePhotoshop13-en_US_x64 13.0.0.0
----------- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------
ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\PRINCE\Desktop\Adobe Photoshop CS6\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
Anyone can help me please.........

i can't install Microsoft Visual C++ 2008 Redistributable Package (x64)

Suspended install of CS6 during power outage

Similar Messages

Maybe you are looking for