Suspending service while going on vacation

There seems to be no information on suspending service while on vacation. I did it last year and "they" tried to charge me more than I actually pay for the service. I believe there should a transparent fee for aforementioned. Other then that the service has been fine.

I am replying to my message. I called today and asked about suspending my home phone and DSL for two months while we are on vacation. The girl said fine and the cost would be approx. $7.00 a month for the phone and a one time fee of $9.99 for the DSL. A short time later I get a E-Mail from verizon telling me that I will have mobile call up service for the internet and that will be $9.99 a month and that it is mandatory to have to "maintain the account". What a "crock" I have a cell phone, don't really need the home phone and am beginning to think I would be better off without the home phone.

Similar Messages

Suspending service while in Army basic training?

I have been a Verizon customer for almost 10 years..when I go to Army basic training what do I do with my phone/cell service? Am i allowed to break my contract or do i suspend it temporarily? I'll be gone for about 19+ weeks and don't want to pay for service if I can't use it. Thanks!
Seana

SherryInFL wrote:
My son did all of the above, was deployed to Afghanistan for a year, had shown his papers to Verizon, was told he was good for a year, AND just got home to reactivate and has a $300 plus bill and never had a thing come to him in the mail while gone. Just an FYI Apparently Verizon does not give a crap about our soldiers. I hope they make it right and if they do I will share with yall but as of now my son is being punished for following the rules and defending our freedom.
Thank you to the community for assisting with this thread! Service can be suspended for active military deployment purposes up to 24 months total. After that time, a specialized team handles the accounts to ensure proper action is taken on account, including re-suspending service. Verizon Wireless does not penalize those in our countries armed services by purposely re-activating an account or by any other means. We take great care to accommodate in these special and often sensitive circumstances. This sounds like a simple error that should be addressed with Verizon Wireless directly, instead of jumping on a forum that we may or may not see. I would be more than happy to address this situation with you, SherrylnFL. Please PM me your name and mobile number so I can do so.
Thank you!

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Suspending Service for Military Move overseas

My husband is in the Navy and just got orders overseas. We will be living in Italy for 3 years. I have had my number & account with Verizon for over 10 years. I do not want to give up my number and account history while I am out of the country. Is there a way to suspend service for 36 months while the Military moves us to Italy? I know active duty can get it suspended while they are on deployment but I wasn't sure if I, as a military spouse, would be able to use the suspension. I am a very loyal Verizon customer and I do not want to switch my service provider.
Thank You!

Aneal wrote:
My husband is in the Navy and just got orders overseas. We will be living in Italy for 3 years. I have had my number & account with Verizon for over 10 years. I do not want to give up my number and account history while I am out of the country. Is there a way to suspend service for 36 months while the Military moves us to Italy? I know active duty can get it suspended while they are on deployment but I wasn't sure if I, as a military spouse, would be able to use the suspension. I am a very loyal Verizon customer and I do not want to switch my service provider.
Thank You!
I dont think so.
ATTENTION, we need a CSR over here in isle 7 for a question!

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Getting Error While Going For Print Preview in ALV Report

Hi,
We doveloped a new report based on client requirment while going for print preview all the fields are shufling.Can you please guide me I am unable to solve this problem.
Regards
Suresh

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Getting dump error in Sales order creation mode while going to item texts

Hi,
I'm getting an ABAP dump error while going to item text tab in the creation mode of a sales order. This issue is happening only when we make a manual entry in the item text field for a particular text type Y011 in the preceding document of the sales order. Otherwise everything is working fine.
When I checked the settings in SPRO under SD - Text Control - Sales Doc - Item, the definition and assignment for the TEXT type Y011 is maintained correctly. Not sure why the issue is happening only with this text type.
Please assist. Thank you
Taiseer

Thank you for the reply.
We had tried this already. However, since the error is with standard program with many function modules. They are finding it difficult.
There is strange side also for this error that I missed to update. When I replace the Text Id Y011 with a new one it is taking me to the line item text tab with out any error even though I'm using the same access sequence and other settings. However, after saving the order and displaying the order number, immediately it is going to dump again.

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

I used to be able to download files from the Harddrive of my Sony Handycam, but now it won't let me import them while going through "log and transfer." I have tried to update my settings, but this doesn't seem to work. Any help would be much appreciated

Hard Drive: The Hard Drive is on my camera (Sony Handycam)
Just needed some info on what is going on with your particular system.
Knowing the exact camera model will also assist us.
If this camera is standard AVCHD you should be able to connect with USB to Mac with FCE open and use Log and Transfer without all the fiddling around converting etc.
What FCE does during ingest is convert files to AIC. (Apple Intermediate Codec)
FCE cannot read the individual files in the BDMV folder, that's why all the converting is required when you use that method.
BTW: regards formatting drives/cards/memory on cameras; it is wise to use the actual device to format rather than a computer. This is a prime cause of read/write goof ups with solid state media. This applies to still or video cameras.
Keeping the COMPLETE card/memory structure in tact is vital for successful transfers.
Try here for some trouble shooting tips:
https://discussions.apple.com/message/12682263#12682263
Al

I got a text saying that if I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my accoun

I got a text saying that I don't pay my bill, my service is going to get cut off by the end of the day. I don't have the funds to pay it in full, so I paid half the amount. Would that suffice? Or would I have to pay it in its entirety to save my service from being cut off?

As it was pointed out making prior arrangements could of helped extend the time you need to get your account back in order..
But if you have to have the phone and its the only thing you have to make calls, I would try other means ( Family, Friends, or other ) to get the rest of the balance payed and you can pay at a Corporate store using the stores Kiosk machine.! You can pay with Cash, Credit or I think with a check but using a check I'd ask the Local store how the policy is on that..
Hope that Helps.! Good luck..

Can I bring up siebel services while DB in read only / Standby Mode

Hi,
I am trying to bring up the siebel services while DB is in read only mode..
Can I bring up siebel services while DB in read only / Standby Mode ???

Hi ,
Not sure. But I think you can, since bringing up the siebel service require some query from DB and some readings from the gateway.
Cheers

Why to extra service while installing RAC?

Hi All,
I have installed 10gR2 2-node RAC. By following the steps given in the following link:
http://www.oracle.com/technology/pub/articles/hunter_rac10gr2.html
I have the following doubt:
In this link, it is mentioned to create ORCLTEST service apart oracle's original service_name (ORCL) and TAF on ORCLTEST service while creating cluster database using DBCA. Why do we need this? can we apply TAF on the original service name(ORCL)? if so, how can i do it? While connecting from any applications like web based application which one to use ORCL or ORCLTEST?
Thanks,
Praveen.

As Jeffrey says ... during the install, he created the extra TAF-aware service. "It provides all the necessary configuration parameters for load balancing and failover."
TAF has some non-traditional configuration requirements. Go back through the install & configure sections to see exactly how he did that. Or read the Oracle Networking manual ... TAF is primarily implemented in the Oracle Networking layer and the appropriate OCI libraries.

Presentaion service frequently going down

Hello,
I am trying to genrate a report in a pivot table format which contains 15 rows.When i am trying to generate this report ,all of a sudden the presentation service is going down.Its not showing any errors.
What might be the cause.
Thanks in advance.

Which log files did you check?
Try increasing the logging levels for sawserver in logconfig.xml until you do see an error.
Once you've got an error then the obvious place to check is Metalink, there are known bugs around pivot tables in OBIEE.

While going through uninstalling programs I didnt need i accidently uninstalled bonjour, where can i go to download it again?

While going through uninstalling programs I didn't use any longer, I accidently uninstalled bonjour. Where can I go to download it again?

Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
For the reinstall, use an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
... or you could get it back via your Apple Software Update for Windows.
If you'd prefer not to uninstall iTunes, try the following procedure.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

Slow while going from one screen to another screen

Hi,
I have installed SAP 4.7 version. The hardware of system is 3GHz processor and 1 GB RAM. It is taking more time while going one screen to another. So after entering XD01 or any tcode , I have to wait for seconds some times 10 second to a get a screen and getting a screen form another screen.
Can any one tell me reason for this and how can be this issue resolved.
Thanks,
Manas

When using system for the first time, a lot of compiling still has to be done which takes time, but also the fact that your system 'only' has 1 GB RAM, could cause these problems as well. According to requirements, 1GB should be enough, but I would recommend at least 2GB.

I'm going on vacation and would like to have some movies rented for the flight. I won't have wifi so can i download rented movies?

I'm going on vacation and would like to have some movies rented for the flight. I won't have wifi so can i download rented movies?

Prior to going you can rent and download them on your iPad via its iTunes store app, or rent and download them on your computer's iTunes and connect and your iPad and move them to it - they will go in the iPad's Videos app.
Some people have posted that they need to start playing rentals whilst they still have internet connection, so you may want to watch a few seconds prior to going offline - you have 24 hours if you are in the US, 48 hours elsewhere, after starting to watch a rental before it expires.

Suspending service while going on vacation

Similar Messages

Maybe you are looking for