Suspension LOP

Gurus
In Suspension action salary shouls be deducted by entering LOP in Absence Infotype, that is taken care manually.
But in another action Revocation the Deducted LOP is repaid to Employee. What is the best way to do it.
1. Deleting the LOP in Absence which is created During Suspension Action (is there any issue if deletion of LOP will trigger Retro Pay)
2.Any other way to do it.
Edited by: HRSAP2011 on May 4, 2011 7:47 AM

Hi Sikindar
If i need to Pay it in IT015, i cant pay through a sinle wage type.
LOP means Amount will be deducted from wagetypes which is having PCL10 (proration) in IT0008. But Other Processing Class and Cumulation Class will Differ for those Wage types.
In this case how to repay it in the same way and Aount which Suspension LOP is deducted

Similar Messages

Rule on LOP for 30 days

Dear Team,
   I havea requirement, where LOP is calculated on 30 days basis.
   If an employee is taking LOP in month of march.
then LOP calculation should be ( amount / 30 ) * (30 - Lop days).
this I am able to acheive.. and it is working fine.
But in the case of employee joining in between of the month.
then the calculation should be ( amount / 30 ) * (no. of present days - Lop days).
How to get the no.of present days while writting the rule.
Your help is required.
Thanks & Regards,
Satya.G

Dear Sikander Ji / Team,
      Could you please let me know....
      What are the variables for
      1. Total days in the month
      2. Total Employee Active days in the month
      3. Total LOP Days in the month.
Why I am asking this is :
The rule I am planning to excute is :
Take a constant as 30 days and name it as Pay process days.
      Pay process days (PPD) = 30
Take payroll run period , begin and end dates into two variables
      Start date ( SD ) = 01.03.2010
     End date (ED) = 31.03.2010
Take the person present days( Active Days ) in the month as :
Person present days = End date of payroll run date u2013 employee Joining date
     PD = ED u2013 DOJ
In the case of LOP we need to pick the number of days in the payroll run month : say 31 in the case of our example month march.
Now the Payroll calculation works as follows :
1. If   PD < = PPD     = ( Amount * PD ) / PPD
2. If PD > PPD          = ( Amount * PPD ) / PPD
In the case of LOP.
Get the LOP days into ( LOP) and get the number of days in the month into (MD)
IF MD u2013 LOP is > 0
Then in the above two cases:
1.     If PD < = PPD     =    ( Amount * ( PD u2013 LOP ) ) / PPD
2.     If PD > PPD       =   ( Amount * ( PPD u2013 LOP ) ) / PPD.
Need to achieve this logic to run the payroll
Hope my logic is clear. this is how I want to achieve the payroll process.
So, to achieve this I require the above said variables, because I am not that much good in writing rules.
Thanks & Regards,
Satya.G

LOP days are not calculated properly

Dear Experts,
I am new to TM, i have configured abscence type for LOP. but when i maintained the same in IT 2001 for an employee for the entire month, the absence days calculated is only for working days i.e 22 days. but i want it to calculate for the entire month i.e 31 days.Please help me as it very urgent.
Thanks a lot in advance.
MVN

Thanks for your immediate response.
i have maintained all the ticks for the counting rule for LOP absence type. but in the infotype it still shows 22 days instead of 31 days for the month of oct.
Regards,
MVN

Creation of suspension line items for Subscription orders

hi ,
I am currently working on IS-Media project.
I have a requirement that I need to create a suspension for all the line items available for the subscription orders.
I mean I have to create a new line item for all the active line items of a subscription order.
I have seen the FM : ISM_SALES_ORDER_CHANGE.
it is working for only single active line item.
Could you please suggest any of the Function moulesavailable in the SAP : IS-Media?
Thanks in advance.
Vijay.

Vijay,
The best FMs that would meet your needs are below. They are listed in the order that will best address what you are trying to accomplish. They are ISM_SALES_ITEM_UNLIMIT_CHANGE, ISM_SALES_ITEM_SUSPEND and ISM_SALES_SCHEDULE_CHANGE.
I hope this helps.
Sibu

Problem in my phone suspension and billing

Dear Verizon Wireless,
Hi, I've been a loyal customer for Verizon, but I recently figured the website or the customer service are very hard to reach.
Since I had a problem with my billing, I was trying to contact Verizon Wireless via live chat to look for customer help but every time I visit the website, the live chat is not available even in its operation time.
So I looked for Verizon's customer service email to address my issue, but I couldn't find it through the website.
The website kept saying the web page is not currently available and asked me to try later, which never worked.
So here I am trying to post my problem in the discussion forum.
If it causes any problems, I am willing to put this post down but I really need to get in touch with the customer service.
My problem is that I have set my phone (iPhone 4s) on suspension.
The billing was supposed to stop but I've been getting bills constantly.
As the notice mentioned that I won't be charged for any fees for suspending my phone, I didn't care to regularly check my account, since I am outside of the States.
I have never used my phone or Verizon service (no roaming at all), but currently I am billed with more than $300 which I am not willing to pay for service that I never used.
Please take care of my situation.
If you need my information, please leave a note on this post, or email (removed)
Thank you.
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator
Message was edited by: Admin Moderator

Hi Mc7jin,
We want reaching us to be easy! I apologize that this did not occur. We offer customer service via Live Chat, Twitter, Facebook, and Phone http://vz.to/19bXyZu. We can help here as well. If your phone line is on a voluntary suspend, you have the option to suspend services with or with our billing. Suspending services with billing means the contract will not be extended by the time frame the phone was suspended. If you suspend without billing the line contract will be extended by the time frame of the suspension to keep your 24 month agreement http://vz.to/SWW4kE . Did you suspend the line via MyVerizon or customer service?
Did you want to change the suspension to without billing and extend the contract?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Not able to clear the cenvat suspense account

Hi Experts,
Is there any T.code or short-cut method to find out the clearing documents for every open items in cenvat suspense account. Is it possible to run in the automatic clearing method through T.code:F.13
in the absence of month end processing.
Thanks & Regards,
J.Francis

Yes , you can clear the clearing account even you are not doing month end process via f.13 subject to you have configured the Automatic clearing in system.
You can find the clearing document in FBL3n itself by screen layout. Or in BSEG table AUBGL feild gives you details of clering document .
Hope this will helps you
Regards
Parag

Sales from Depo u0096 All Excise amount in A/c document is hitting Suspense A/c

Hi Friends,
Issue: Sales from Depo All Excise amount in Accounting document is hitting Suspense A/c only, we need to clear the Suspense A/c and the amount should hit the relevant and correct GL A/cs.
We are making sales from the Depot Plant & we are following the below
process :
1. Sales Order : VA01
2. Delivery : VL01N
3. Picking
4. Packing
5. Shipment:VT01N
6. Shipment cost : VI01
7. PGI: VL02N
8. Excise Invoices for delivery at Depot: J1IJ
9. Billing (F2): VF01 (Auto account releasing in background).
The main problem is the accounting document is capturing all excise
duties and hitting suspense accounts. Where as we want to clear this
Suspense Accounts through the relevant G/L Accounts.
At the time of creation of Excise invoice for depot sales through the T-Code J1IJ it is only updating RG23D Register and creates the folio
number internally, but no Excise Accounting document is happening.
After Goods Receipt at depot plant and When we are doing the Excise
Invoice for the Goods Receipt to Update RG23D for the Depot plant
through the T-Code J1IG it is only updating RG23D Register and creates
the folio number internally, but no Excise Accounting document is
happening.
Please let me know the solution So that the excise amounts will be
released from suspense account to the respective G/L Accounts.
Thanks in Advance,
Vijay
91-9886214179
Message was edited by:
vijay kumar

hi,
for the accnting doc not getting generated plz check if its not of the deemed export type. u can find this in table j_1iexchdr. img-log general-taxes on goods mvmnt-india-business transactions---outgoin excise invoice --maintain defualt ex grp and series grp
for teh clearing acnt proble plz find this path and check the settings img-log general-taxes on goods mvmnt-india-accnt deternination-specify excise acnt per excise transaction type. (check settings for dlfc here). next following img-log general-taxes on goods mvmnt-india-accnt deternination-specify G/L acnt per excise transaction type- cchk if the g/l codes have been assigned.
saurabh

Try print from Microsoft Word XP : printer (HP Oficejet 4500 G510n-z) lops off top of random lines

try print from Microsoft Word XP: printer (HP Officejet 4500 G510n-z) lops off top of random lines

CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
Now what?

Full Elastic HD Suspension...MEGA 651.

This is the first time I tried an elastic HD suspension setup. It's really a tight fit in this MEGA 651, but it's in there with a 1/2" clearance on all sides. I mounted the drive on a 4mm aluminum plate, which provides some thermal transfer/cooling. I used some fairly small elastic straps, from a drug store....I think kids use these things in their hair. (?)
The case is relatively thin aluminum, and if you mount the HD as intended, the whole case vibrates. This setup stops all that.... I suppose you could apply a similar setup in other cases.
This is the first time I've seen this technique in a SFF. Works good. :D

Looks nice Bluefront, I already enjoyed looking at your photoalbum earlier.
My HD hangs in a Zalman cooler. It was a tiny fit, but it doesn't touch the case at all. The rubber bands I attached for the vibration and I used some cable ties to get it on the right heigt. I actually saw this setup on the MP forum, and I decided to remove all the inside metal as well and achieve some less noise...
I am still dubbing to install an extra fan by the radio module to stimulate some extra air flow, for the temps it would be good but it has to be a real silent one. I will see, at the moment I have pretty stable temps...
Once in a few months though, I have to take the vacuum cleaner to get all the dust out of the heatsink cooler, it blocks all the air.
To demonstrate the setup I add some pics as well:
.

How to offset Cenvat suspense and cenvat clearing

Hi
Please tell me how to clear cenvat suspense and cenvat clearing in case of sales return and purchase return? pls give the T-codes and the entries
thanks in advance

Hi Dina/Experts,
I would like to know the Accounting that takes place while Capital project is setup to collect costs as follows:
Supplier Cost for Architectural drawings: $2,000.00
Supplier Invoice for building Contractor: $5,000.00
Supplier Invoice for building Permit Penalty: $ 100.00
$7,100.00
Employee Labor project Management: $1,400.00
Employee Expense Report for Misc. Costs: $ 800.00
Cost for Usgae of Company Car: $ 150.00
TOTAL COSTS FOR PROJECT X $9,450.00
=======
What is the Accounting in AP for the Capital Project? What is the Accounting that would take place once the Costs are interfaced to Projects fom AP?
What is the Accounting that takes place when you generate Asset Lines if at all?
What is the accounting that takes place once the Project Cost are Interfaced to Fixed Assets?
Thanks,
Arun

Clearing of Cenvat, cvd, cenvat suspense celaring accounts

Hi
Can any one explain how can we clear the gl accounts of Cenvat clearing, CVD Clearing, Cenvat suspense accounts.
Regards,
Naru

Hello Naru,
CENVAT celaring account would clear wrt to Part2 account entry and MIRO entry. ( It should be clear with respect to Purchase order and Line item number). Transaction code :- F.13
Cenvat suspenses account :- Clearing should happens nature of business tranactions. ( Mainly delivery or sales order number )
Regards
Mani

Organization Suspense Account Setup in Labor Distribution

Hi,
We are doing the Labor Distribution Setup for our Client. Our Destination is to Transfer the data to Oracle Projects.
The Issue is with Creating an Organization Suspense Account which is Madatory Part of LD Setup.
We have created a Generic Suspense Account Organization, but When we tried to Populate the Projects, Taska, Awards, Expenditure Type and Expenditure Org for Projects, it is not allowing to do. The field is protected against Update and when tried even then also it throws the error
"APP-PSP-138235: Charging Instruction cannot be updated. Payroll has been imported with Payroll period end date of".
Can anyone please help us in this. As we are working for the first time in LD, we are not sure with the Setup and Profile Options also.
Thanks,
Kamatchi

Hi,
Configure Outlook to connect to your CAS on port 587 (CASSERVER\Client Frontend CASServer) and make sure that "My outgoing server (SMTP) requires authentication" is checked.
Martina Miskovic

Cenvat suspense and cenvat clearing

Hi
Please tell me how to clear cenvat suspense and cenvat clearing in case of sales return and purchase return? pls give the T-codes and the entries
thanks in advance

Hi
Please tell me how to clear cenvat suspense and cenvat clearing in case of sales return and purchase return? pls give the T-codes and the entries
thanks in advance

Clear shortages to suspense account

Hi,
We have had a situation where several shipments where found to be short by several units on several lines for three orders. We have since developed a process to receive all product on the order and write shortages to a suspense account which will then be properly cleared. However, with these three previous orders, SAP will not allow us to go in and receive in the shortages. We need to clear all shortages shown in the MB5T report for orders 4500193685, 4500197424 & 4500204456 to a the interco suspense account 1200000.
Can anyone please tell me how to clear the shortages
Thanks

Try tcode F-03 - Clear . There you can clear a properly set up (open item)account to another GL account. Put in your GL account and documents. Write off the amounts to the account you desire.

Half Day LOP / Unpaid Absence not working for payroll india

Dear Gurus,
I have created Unpaid leave which is working correctly when we maintain full day absence in infotype 2001.
But it is not working for partial absence ie, half day.
I would really appreciate if you help me out on this issue.
Thanks,
Rajesh Badita

Dear Venkey / Rajesh,
My issue is resolved. We have tried with Custom PCR which will convert absence days into hours. With this we are able to achieve the desired result.
Copied from standard PCR "INP1" to "ZNP1" and modified "/801 partial period factor 1" logic. Below is the PCR for your kind reference.
RTE=TKSOLL
RTE*8
RTE-TSAU**
RTE/8
RTE*KGENAU
RTE/TKDIVI
ADDWT *
Kindly go through the below link which is very useful. Hence closing the thread. Thanks for your valuable inputs.
http://wiki.sdn.sap.com/wiki/display/sandbox/PCRmodificationincaseofHalfdayUnpaidLeave(LOP),IndiaPayroll
Thanks & Regards,
Rajesh Badita
Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:05 AM
Edited by: Rajesh Badita - ABAP HR on Oct 13, 2011 7:08 AM

Suspension LOP

Similar Messages

Maybe you are looking for