Sustain Pedal not working when recording with software instrument piano

I have an M-Audio sp-2 sustain pedal going into an M-Audio Keystation 88es, which is connected by USB to my mac. When I'm recording and holding down the sustain pedal, the sustain is working properly. However, when I playback what I have recorded, the sustain is gone and it is just the regular piano key notes with no sustain. Does anyone know what the problem here is?

This appears to have been a bug. After restarting the computer the sustain recording is functioning normally now.

Similar Messages

Sustain pedal not working with my MIDI setup

So, I'm using a Yamaha P-140 hooked up with my Macbook Pro using a Midi-USD cable. I'm mostly using it for Logic Pro X and Sibelius, and it works just fine. However when I use the sustain pedal, it's playing an E3 note and it's messing up all the sound adding a lot of reverb.
Now, this isn't a problem when I'm using the piano as it is. It's also not a problem with either Logic or Sibelius, cause when I'm testing it with the "Sound and MIDI Setup" app on Mac, the sustain pedal is recognized as one of the "hammers" on the keyboard.
I have no idea as how to fix this problem, and it's really annoying having to play super legato when I'm recording.
Thanks in advance.
Note: The keyboard have an "AUX Pedal" input and a "Sustain pedal" input.
USB MIDI Cable specs:
(As written on the package)
- Built-in driver
- USB powered and Class Complaint for true plug & play. Just connect to a computer USB socket for automatic installation of the driver.
- 1 in + 1 out MIDI interface; 16 MIDI input channels & 16 MIDI output channels
- LED's indicate power on, MIDI in signal and MIDI out signal.
- Supports Windows XP, Vista and Mac OS X operating systems
Aditional info:
Now, I've seen the event-recording in Logic for when I use the pedal, and it's picking up 2 different signals. The first one is a "Controller" (as it say under "status") with the info "Sustain", the next 2 have the status "Note" each one triggering an E3.
I looked it up and the pedal is a Yamaha FC3 half damper sustain pedal. I'm not an expert when it come to pedals, but I believe a half damper is a pedal with multiple trigger points? Giving you different amounts of sustain depending on how much you're "pressing it".
(Position 2 1 1 19 = pedal release)

Try deleting Logic's preferences... sounds like a control surface issue.
Delete the Logic 10 preferences file AND the shared control surfaces file.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro User Manual for details on how to do this.
If you are having trouble with a control surface in Logic Pro.
then delete the com.apple.logic.pro.cs file from the preferences folder.
Note: Delete both files, they will be rebuilt the next time Logic runs.

Sustain pedal not working in Mainstage only with Kontakt 4 plugin

I can't get Kontakt 4.0.2 to sustain notes when instantiated in Mainstage.
The sustain pedal works fine for Kontakt in stand alone mode, and for the same patch/channel strip in Logic 9, but not when in a channel strip in MainStage.
I have the pedal mapped properly (same channel, same keyboard selected, same channel selected on Kontakt plugin), since all other patches work fine with said sustain pedal in Mainstage... except for the Kontakt samples.
I have tried a different controller with a different sustain pedal (again, properly mapped and channel synchronized- same channel on controller, pedal and Kontakt interface), and the same thing occurs.
I have gone into the "wrench" area of the Kontakt plugin/instrument options/controller/MIDI controller #64(Sustain Pedal) acts as". I have set this to both Pedal + CC, and Pedal w/o CC and restated Mainstage on both occasions.
Neither setting works. Again, the same settings work fine within Logic (i.e. the sustain works). I have the pedal mapped to the right keyboard and to the same MIDI channel in Kontakt, and I can see it respond on the Mainstage interface; in fact, I can play the patch fine; it just doesn't sustain!
An interesting thing is that when I press the pedal, I can see a MIDI message on Mainstage but not in Kontakt.
Have you come across this issue before? Any ideas on what's going on and/or fixes?
Thanks.
This is the NI reply:
David Das
Moderator
Join Date: Apr 2006
Posts: 3,179
You shouldn't have to assign it in Kontakt -- it just works. I would delete that.
A key indicator is that when you press the pedal, the MIDI message does not appear in Kontakt. That tells me your problem is in MainStage -- for some reason MainStage is intercepting that MIDI data. Therefore, the problem's not inside Kontakt's edit mode. It's somewhere in MainStage.
Sorry I can't be of more help but at least that narrows it down.
www.daviddas.com
My reply:
By the way, if you want to instantiate a Kontakt 4 patch within Mainstage, you have to create a keyboard surface in Layout mode, then assign it and map it to the keyboard you want to play that channel strip with in edit mode. If you don't map a sustain pedal object, Mainstage doesn't receive its message; therefore I am confused when you write: "You shouldn't have to assign it in Kontakt -- it just works. I would delete that."
The keyboard is mapped correctly, since I can play the Kontakt patch fine. Both wheel controllers and the sustain pedal are not getting midi data into Kontakt. As I said, everything works fine in Logic with the same set-up; so I agree, it has to be something I am missing within Mainstage...I just don't know what it is!
Has no one else had this issue on this forum?

Personally I don't think that's a solution and may not change a thing. Logic probably recognized the Akai and tried to use a stock Controller Assignment.
It's easy enough to try this without deleting the file I mentioned.
With Logic running, go to the far left Logic Pro menu, go the Preferences> entry down near the bottom is Control Surfaces. You can Bypass, Rebuild or check what is assigned there.
Believe me... this is not time and trouble... had someone more knowledgeable than me about this particular problem answered you, you would've been on your way.

Sustain pedal not working with some es2 instruments

the sustain pedal works with some es2 instruments and not others. is there a filter setting where it can be turned on and off?
thank you

Some instruments never had sustain pedals, Organs, Clavinet...etc
Which ones aren't working.

WMI InvokeMethod for StartService does not work when used with ManagementOperationObserver on IIS

Hi,
I am using .net 4.5 and C# to remotely restart the services. I am using WMI to do this task. This code works when called from windows application on the machine, but same code when used inside web application it gives exception of invalid parameter.
We saw it log error in System Event log
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
and APPID
{49BD2028-1523-11D1-AD79-00C04FD8FDFF}
to the user IIS APPPOOL\<app pool user> SID (S-1-5-82-634865507-143429395-1373251082-3464226226-3883016302) from address LocalHost (Using LRPC). This security
permission can be modified using the Component Services administrative tool.
I am pasting below code for reference.
m.InvokeMethod(observer, "Startservice", null, null);
//wait until invoke method is complete or 30 sec timeout
int intCount = 0;
while
(!completionHandlerObj.IsComplete)
if (intCount > 60)
MessageBox.Show("Inside 30 seconds");
break;
//wait 1 sec.
System.Threading.Thread.Sleep(1000);
//increment counter
intCount++;
//see if call was successful.
if (HandlerObj.ReturnObject.
Properties["returnValue"].Value.ToString() == "0")
isStarted = true;
Dhanaji

For web apps the context will be the context of the app pool. Unless you set the app pool to run as a user account that has admin privileges on the remote machine then you won't be able to control the services on a remote machine. If you have
enabled Win auth such that the app runs in the context of the remote user then you might need to turn on delegation otherwise the hop won't work.
Note that if you are using Win auth then consider using ServiceController instead which provides the same functionality as WMI but with a cleaner syntax. This wouldn't work if you need to impersonate a user though.
Michael Taylor
http://blogs.msmvps.com/p3net

Function module not working when used with 'In Background Task'

hi,
this is my code
call function 'Z_IBD_FILL_ZINETACT'
              in background task
              destination 'SAPD220125'
              tables
                  it_net1 = it_net1
                  it_net2 = it_net2
                  it_net3 = it_net3 .
when this code is executed i am not getting any data in my internal tables i.e it_net1, it_net2, and it_net3
but i changed this code see the below code
      call function 'Z_IBD_FILL_ZINETACT'
             in background task (THIS IS COMMENTED)
              destination 'SAPD220125'
              tables
                  it_net1 = it_net1
                  it_net2 = it_net2
                  it_net3 = it_net3 .
now i am getting data into my internal tables
can any one tell me what can be the problem and how to solve it in my case
its very urgent

Hi,
Pls. go through the docu..
CALL FUNCTION
Variant 5
CALL FUNCTION func IN BACKGROUND TASK.
Additions:
1. ... AS SEPARATE UNIT
2. ... DESTINATION dest
3. ... EXPORTING p1 = f1    ... pn = fn
4. ... TABLES     p1 = itab1 ... pn = itabn
Effect
Flags the function module func to be run asynchronously. It is not executed at once, but the data passed with EXPORTING or TABLES is placed in a database table and the next COMMIT WORK executes it in another work process.
Note
This variant applies only as of Release 3.0, so both the client system and the server system must be Release 3.0 or higher.
Note
qRFC with Outbound Queue
This is an extension of tRFC. The tRFC is serialized using queues, ensuring that the sequence of LUWs required by the application is observed when the calls are sent.
For further information about qRFC, refer to the Serialized RFC: qRFC With Outbound Queue section of the SAP Library.
Addition 1
... AS SEPARATE UNIT
Effect
Executes the function module in a separate LUW under a new transaction ID.
Addition 2
... DESTINATION dest
Effect
Executes the function module externally as a Remote Function Call (RFC); dest can be a literal or a variable.
Depending on the specified destination, the function module is executed either in another R/3 System or as a C-implemented function module. Externally callable function modules must be flagged as such in the Function Builder (of the target system).
Since each destination defines its own program context, further calls to the same or different function modules with the same destination can access the local memory (global data) of these function modules.
Note
Note that a database commit occurs at each Remote Function Call (RFC). Consequently, you may not use Remote Function Calls between pairs of statements that open and close a database cursor (such as SELECT ... ENDSELECT).
Addition 3
... EXPORTING p1 = f1 ... pn = fn
Effect
EXPORTING passes values of fields and field strings from the calling program to the function module. In the function module, formal parameters are defined as import parameters. Default values must be assigned to all import parameters of the function module in the interface definition.
Addition 4
... TABLES p1 = itab1 ... pn = itabn
Effect
TABLES passes references to internal tables. All table parameters of the function module must contain values.
Notes
If several function module calls with the same destination are specified before COMMIT WORK, these normally form an LUW in the target system. Calls with the addition 1 are an exception to this rule - they each have their own LUW.
You cannot specify type 2 destinations (R/3 - R/2 connections).
(See Technical details and Administration transaction.)
Example
REPORT RS41503F.
/* This program performs a transactional RFC.
TABLES: SCUSTOM.
SELECT-OPTIONS: CUSTID FOR SCUSTOM-ID DEFAULT 1 TO 2.
PARAMETERS: DEST LIKE RFCDES-RFCDEST DEFAULT 'NONE',
            MODE DEFAULT 'N',
            TIME LIKE SY-UZEIT DEFAULT SY-UZEIT.
DATA: CUSTITAB TYPE TABLE OF CUST415,
      TAMESS   TYPE TABLE OF T100,
      WA_CUSTITAB TYPE CUST415.
SELECT ID NAME TELEPHONE INTO CORRESPONDING FIELDS OF TABLE CUSTITAB
               FROM SCUSTOM WHERE ID IN CUSTID ORDER BY ID.
PERFORM READ_CUSTITAB.
EDITOR-CALL FOR CUSTITAB TITLE 'Editor for table CUSTITAB'.
PERFORM READ_CUSTITAB.
CALL FUNCTION 'TRAIN415_RFC_CALLTRANSACTION'
     IN BACKGROUND TASK
     DESTINATION DEST
     EXPORTING
          TAMODE    = MODE
     TABLES
          CUSTTAB   = CUSTITAB.
CALL FUNCTION 'START_OF_BACKGROUNDTASK'
     EXPORTING
          STARTDATE = SY-DATUM
          STARTTIME = TIME
     EXCEPTIONS
          OTHERS    = 1.
IF SY-SUBRC = 1.
EXIT.
ENDIF.
COMMIT WORK.
CALL TRANSACTION 'SM58'.
      FORM READ_CUSTITAB                                   *
FORM READ_CUSTITAB.
WRITE: / 'System ID:', SY-SYSID.
SKIP.
LOOP AT CUSTITAB into WA_CUSTITAB
    WRITE: / WA_CUSTITAB-ID, WA_CUSTITAB-NAME,
             WA_CUSTITAB-TELEPHONE.
ENDLOOP.
ULINE.
ENDFORM.
Pls. reward if useful....

Why does this script not work when run with osascript cli?

I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
set output to {"TODOS:
set highpri to {}
set medium to {}
set low to {}
set nada to {}
tell application "iCal"
repeat with i in calendars
repeat with j in todos of i
if (completion date of j as string) is equal to "" then
if priority of j as string is equal to "high priority" then
copy summary of j & "
" to end of highpri
end if
if priority of j as string is equal to "medium priority" then
copy summary of j & "
" to end of medium
end if
if priority of j as string is equal to "low priority" then
copy summary of j & "
" to end of low
end if
if priority of j as string is equal to "no priority" then
copy summary of j & "
" to end of nada
end if
end if
end repeat
end repeat
end tell
return (output & highpri & medium & low & nada) as string

well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

Airport Express not working when used with Broadband Router **HELP!!!**

Hello.
I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
Is there a way to configure the router to see the AX?
Thanks for your help!

Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
Hope this might help someone.
Michael
iBook G3 (600 MHz) Mac OS X (10.4.3) D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

Plug-ins in Color Efex do not work when used with Lightroom? really need help

Dear all,
I am suffering the problem with some plug-ins (some others still okey) of Color Efex when I use them with Lightroom. Specifically, the image I chose to edit in Color Efex turned black as I tried to apply a plug-in, ex Detail extractor. Pls see the pic below:
Before
...and After
I am using Win XP and wondering whether this is the root of this problem? Pls help me for a solution if you know it.
Many thanks for reading and supporting!

Dear all,
I emailed Nik team and it is just exact as what you said, they are very helpful and supportive when provide me several of solutions. Thank god one amongst them solves my issue completely. I performed the following steps:
If you are able to open Color Efex Pro 4and can see part of the interface, see if you can click on the"Settings" button in the lower left.
In Settings locate the section "GPU" and expand it, in this section you will see a check box "Enable GPU Processing", uncheck this so the GPU will be disabled, then close the settings window.
Close out of Color Efex Pro 4 (click Cancel), quit out of any and all host applications (Photoshop,Lightroom, Aperture), and then relaunch Color Efex Pro 4 to see if this corrects this issue.
Thank to Nik team and you guys here. I'm now able to work with my new project better

Toggle key tones not working when Creative enhancement software is active?

Sound Blaster X-Fi Xtreme Audio
Winows 7 Prof 64bit
All latest drivers
Hello all
I make use of the Windows 7 toggle key tones. For those who don't know that: when enabled, your hear a tone when you strike the Caps Lock, Num Lock and Scroll Lock keyboard keys. Especially the Caps Lock tone is very handy cause you know right away that you pressed it by accident
But when the Creative Sound Blaster enhancements are set to Active in the Properties of Speakers part of Windows 7, those key tones do now work any more? When I switch the Sound Blaster enhancements Off, then the key tones do work just fine.
All other sounds are just great, no trouble at all with that. It's only those key tones that don't work any more whit the enhancements set to On.
Is there a solution for this?
Edit: forgot to mention. I have normal stereo 2.0 speakers, Creative Gigaworks T20 II.
Thanx in advance,
Menno
The Netherlands

thanks
that site seems good but whenever i click on a link to downlad i get
Access Denied
You don't have permission to access "http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1. dmg?" on this server.
Reference #18.8fe9df5a.1393438653.7725c4
any ideas?

[SOLVED] Pacman and yaourt not working when run with "sudo"

Hi,
I am an Arch newbie, just installed Arch 3.10 on my machine. I access internet through a proxy server and I'm facing this strange problem -
Pacman is unable to fetch packages when I run it through sudo - "sudo pacman -S smplayer" (It gives network unreachable error).
However when I run it through root, it retrieves those same packages successfully.
yaourt also faces a similar kind of problem -
When I run it through sudo or as root, it is unable to retrieve packages which can be downloaded by pacman. But, when I run pacman to download those same packages, it is able to do so.
I am using gnome 3.8, and use radiotray ( It's for listening online radios ). When I run it via 'Alt-F2' or as a startup application, it's not able to connect to any radio station ( which means it's not connecting to the internet ). However, on running it via terminal, it connects to the internet successfully. Are these 2 problems related ? I'm facing the first one even without loading gnome, so it's not gnome's problem, i guess.
I can ping successfully through my administrator as well as root account, connect to the internet via browser, and ssh, git, bzr are also working fine.
What can I do to resolve this ?
Thanks
Last edited by parinporecha (2013-09-12 06:01:06)

parinporecha wrote:
To configure proxy, I added the line "export http_proxy=PROXY_LINK" to the bashrc files of user and root.
Regarding Arch 3.10, yes i meant the installation media from 2013.09.01 ( kernel 3.10 )
That's why root works, but not sudo. Sudo clears the environment. See man sudo and man sudoers.

Tinymce declarative component not working when added with PPR

I have a declarative component that i exposed in a resource catalog.
This component uses <af:resource> to inject javascript in the page.
the problem that i have is when in editing mode, and you add the component. the components <af:resource> is not yet injected and i have to manually refresh my browser to see the effect.
I am trying to integrate TinyMCE as a component.
This problem occurs because when you click the add button it does a PPR.
If i load a page where my component was already on, I don't have this problem.
I also tried a refresh commandButton, but because forcePPR is configured in the web.xml and I may not change this, it is not executed correctly.
Any ideas to solve this, or a workaround would be helpful?
thanks in advance
<af:group id="dc_g1">
      <af:commandButton text="refresh"
                        actionListener="#{backingBeanScope.tinymceBean.addScripts}"/>
      <af:resource type="javascript" source="/tiny_mce/tiny_mce.js" />
      <af:resource type="javascript" source="/tiny_mce/config.js" />
      <af:inputText simple="true" value="#{attrs.value}" styleClass="AFStretchWidth"
                    id="dc_it1" rows="2" />
      <af:resource type="javascript" text="initTiny();" />
    </af:group>

Try collecting a Process Monitor trace https://technet.microsoft.com/en-us/sysinternals/bb896645 to check what is the Access is being Denied on.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

Importing to iMovie: How do I use an external usb mic when recording with the built-in FaceTime HD Camera?

Hello all
I'm scheduled to work with a friend this week; I'm going to help him make a simple audition DVD. I promised him I had the necessary equipment and such.
I was importing from the webcam using iMovie. If I can't use my external mic to record for the video, there is more involved in the editing process. I was hoping to record the video and audio into one package. I'm using the built-in FaceTime webcam on my macbook pro and a ZoomH1 on usb.
I've tried changing the audio in system preferences: input to H1. This works when recording with audacity or anything else. I even changed the input on FaceTime to H1. There aren't any preferences I can find in iMovie to change the input for importing video directly from the webcam.
How do I change the audio input for direct import on iMovie?
OR
Is there something else I can do to have HD video and HQ audio captured in one video file on my macbook pro?
I suppose I can record the video and audio separately but that is usually much more involved. This is why I got this usb microphone lol.
Thanks in advance,
-Seth

I just found using QuickTime Player to record a movie works great. I can easily change the audio input. iMovie is silly. lol
If I missed anything let me know.
Thanks
-Seth

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

Sustain Pedal not working when recording with software instrument piano

Similar Messages

Maybe you are looking for