SUT and Bin type Bulk storage type

Hi experts,
In cofiguration i have defined for particular storage type, bin type & SUT as 10 HU's per bin. But while doing putaway system has allowed 11 HU's. Kindly explain me how it is happened?
Regards
Maria
Edited by: Maria on Mar 15, 2011 6:53 PM
Edited by: Maria on Mar 15, 2011 7:08 PM

Hi,
Is your placement strategy for the storage type "B"? Is the factor of the stacks x stack height = No of SU's?
Regards,
Hein

Similar Messages

How to find bulk storage type

hi,
i have working on blocking bins in bulk storage type in LX05, i didnt able to find out the bulk storage type out of my all types.
how to figure out the bulk storage type out of all types.
regards
muthuraman.d

Hi
check
SPRO>Logistics Execution>Warehouse Management>Master Data>Define Storage Type
In that for Bulk storage type the putaway strategy will be 'B'(Bulk storage)
You can also check in
SPRO>Logistics Execution>Warehouse Management>Storage Units>Strategies>Define Bulk Storage Area
Regards
Amuthan M
Edited by: Amuthan M on Feb 2, 2010 10:22 AM

[WM] Putaway strategy for bulk storage type SU-managed

Hi Gurus,
I need your help
I have a Bulk storage type with SU-managed. I would undestand the real behaviour of putaway strategy B.
1) Case 1: assume that in bulk storage type there are the followed bins (rows):
- in bin XX1 there is material AAA
- Bin XX2 is empty
In this situation if i receive material AAA, putaway strategy B chooses the bin XX1 by background processing - correct!
2) Case 2: assume that in bulk storage type there are the followed bins (rows):
- In Bin XX1 there is material AAA
- in Bin XX2 there is material AAA
- in Bin XX3 there is material AAA
In this situation if i receive material AAA, i don't undestand the behaviour of putaway strategy B. Seems that the system chooses in random way the bin (XX1, XX2 and XX3).
P.S: the storage unit type is one of default - E1.
Can you help me?
Thank very much

You told
Addn to Stock: X
Block upon placement: empty
Then How can you have Case 2?
In Bin XX1 there is material AAA
Next time also stock goes to XX1 only not XX2 unless you overwrite manually.
What does your block strage structure looks like? i'm sorry but i don't undestand your question.
Go to OMM4 "Define-Block struct." and look No. SUs for your St. bin type, SUT & Bulk stor Ind.

Replenishment From SU Managed Bulk Storage Type

Hi Experts,
We are trying to implement Immediate TO Creation Random Bin Management from a SU Managed Bulk Storage Type.
Our scenario is the following:
We have a SU Managed Bulk Stype: Stype 702
We have a SU Managed Stype with Putaway Strategy "P": Stype 701
We have material 11000026 and we define the following in WM View 2:
Max Qt: 6000
Min Qt: 2000
Replenishment Qt: 3000
Whenever a delivery TO from 701 is confirmed, and the stock level of material 11000026 in SType 701 drops below the Min. Qt, we need the system to immediately generate a replenishment TO: 3000 kg from Source SType 702 to Destination SType 701.
So far we have done the following:
Created a WM.Mov.Type 721, for which Manual TO creation is not allowed and with Ref.Stor.type Search 721.
We defined Replenishment Control for SType 701: with Replenishment Mov.Type 721 and Replenishment Technique 2.
Created SType Indicator with Operation A and Ref.Stor.type Search 721; in the sequence the first and only SType is Stype 702.
We assigned the SType Indicator to Material in WM View 1.
Whenever we actually confirm a delivery TO from 701 and the stock level drops below the min Qt., the system is not generating the immediate TO. What is the correct configuration or how can I achieve our request?
(The configuration described above works perfectly between STypes that have both the same Putaway Strategy, "P")
Thank you,
Leonidas Oyaga

Hi Mihailo,
Just tried running Tx. LT0R. I get Error Message No. L3009: "no destination storage bin to be found in storage type 701."
(Before doing this, I deleted ID Point 711 from SType 701).
I believe the issue is related to the relationship between SU Managed Bulk SType (702) and SType 701. In 702 stock in a storage bin can be identified based on the SU. However, when creating the TR or OT the system is not able to find a destination storage bin because the quantity taken from a storage bin in 702 is greater than the max quantity allowed in a single storage bin in 701. As if when picking the quantities it is trying to deliver the whole quantity to a single storage bin instead of transfering each SU (1000 KG per SU) to a different storage bin.
For Instance:
Material 11000026 Stype 701
Min Qt: 2000
Max Qt: 6000
Replenishment Qt: 4000
Storage Bin Capacity in 701: 1000
When stock level drops belowe Min. Qt, and the system tries to do replenishment from 702 by delivering 4000, the system is not able to find a storage bin in storage type 701 because it excedes the storage bin capacity.
Best Regards,
Leonidas Oyaga

SUT selection in TO from storage type to PSA

Hi All,
The business process is Kanban replenishment where the CCID is scanned for TR creation for demand. TR then automatically converting to TO (movement type- 350). In TO we are getting the storage Unit type selected. need to know the basis of storage unit type selection.
Further details of the movement as eg.
Movement is from storage Type 030 to PSA.
Storage Type 030 has Bulk as Put away strategy and FiFo as Removal Strategy.
It is SUT check active.
warehouse is HU and SU managed.
Two kinds of SUT is there in the storage type 030 - Box and Pallet (L).
Let me know the basis of SUT selection in above TO.
The issue is that different material selects different SUT and there is no consistency. I checked for GR date, Quants, and material master, Move,ment Type data.
Need help from all experts.
Thanks,
Shankar Kumar

Hi Shankar,
As per standard SAP flow,
Step 1 ) system picks the stock removal indicator from the WM1 view of material master
Step 2) Picks the storage type from the T334T table based on the removal indicator from step1
Step 3) Once the storage type selected it goes and check the available Quant in the storage type
Step 4) After selection of all the Quant it sorts the selected record based on the GR date
Step 5) Once the first quant selected it pass all the Quant information to internal table
Step 6) Checks the required quantity minus quantity of first quant selected if the balance is greater then zero process continue from step 2 till the time required quantity - allocated quantity =0
Now your query how system selects the Storage unit type, as you can see from above steps system selects the Quant and the quant is already having the Storage unit type assigned. in the below example i have four quant in the stock and my requirement is for 120 PC, you can see the Sequence in Transfer order system stamps the TO line item based on the Storage type search (003,002 in below case) and then based on ascending order of Goods receipt it selects the Quant from within the Storage unit
in the below example
Storage type search strategy (Entry into T334T)
Stock in warehouse

HU without inventory management and message L3778 in storage type 999

Hi experts,
Need suggestion on the process to add inventory of an HU with status 'HU without inventory Management'. This issue has occurred out of the below scenario:
1. our warehouse is HU & WM managed.
2. We have a transfer order for a delivery document requesting to pick up 100 cases of MAT1 which is assigned to HU1.
3. While confirming the transfer order user has confirmed difference for the full quantity of 100 because the SU/HU was not found in the bin.
4. The system has set the status of HU as 'HU without inventory Management'. The HU is empty.
5. system has moved the stock from the bin to difference storage type 999.
Now user has found the stock for this HU and he wants to post the stock back into the bin. system does not allow to move the stock back to bin using LT01 as we get error message 'L3 778'.
What will be the best practice to get the stock back into the bin and post the stock into the same old HU.
Is there a process wherein we can post this stock to another bin and repack into the old HU?
Thanks,
Harish

Thanks Manish on the hint. I was able to transfer stock to partner location and then bring back to original Storage type/Bin. Below steps was used to fixed the issue:
1. Initiate a transfer of stock from WM/HU Sloc where the IM stock resides into Sloc 9099. An outbound delivery is created during this process.
2. Create a transfer order with reference to delivery and pick the stock from 999 storage type.
3. Create a Pick HU using LH01 and assign the HU on the pallet to the transfer order.
4. Confirm the transfer order using LT12.
5. Perform PGI for the delivery.
6. Use HUMO to display the HU and then you can transfer the stock back to WM/HU location using the storage location transfer option available on the HUMO screen(EDIT à change HU posting à Storage location)
7. Perform Bin to bin transfer to move the SU from 921 storage type to putaway the HU/SU back to the destined Storage type/Bin.
Best Regards,
Harish

High Level Bin Search, before Storage Type Search

Hi,
Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
"" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
I am unable to understand which kind of user exit "+++".
Background: Want to do putaway with storage type 007: Our high rack is having space (Bins) with different capacity. One rack can have 4 type of racks.
We want to putaway material with different bin types in one storage type.
Regards,
Mainsh Gupta

Hi Vijay,
Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
a) We have 98 racks in Warehouse.
b) Product is Ball Bearing.
c) Bearings are handeled in Ea, Issue and Stock unit is Ea
d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
e) Each Rack is having 5 different type of bins.
f) We want to fill rack from bottom to top for first rack, and then next rack.
g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
Case 1) If going with Storage Type 007:
                i) Need to maintain palletization data in Material master WM view 2.
               ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
              iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin, & these quantities are defined from Material Master from Palletization data.
              iv) In this case it is not checking bin capacity.
My query:
i) How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
Case 2) If going for Storage type 002:
              i) Not maintined Palletiztaion data in Material master.
             ii) Maintining capacity check in WM View 1.
            iii) Maintained Capacity check in Bin master.
            iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
Message Number: Message no. L3068
Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
My query: How can we split TO quantity as per next empty bins available.
If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
Regards,
Manish

LT03 for Bulk Storage Types

Dear SAP-Experts,
we use ECC 6.0 with WM. First we create an outbound delivery with VL10a/VL01N, after that we create the TOs with the LT03. We are using storage units(SU) and one SU is one palett. When we create an outbound delivery with 2 paletts the system only created 1 TO. But I need 2 TOs. Is there something to change in the customizing? Should I use an User Exit?
A picture what the system is doing with a bulk storage type:
But this is what I need:
Thanks a lot.
Walter

Hi Walter,
I have never used the split profile in Bulk storage type earlier however i used TO split for other storage type and it works fine for me and i hope the same should work for bulk also. find below the setting which is required to define the TO Split
From the below node select --Define Profile
Define the profile for Performance Data
Select Profile for Transfer order splitting
Sort profile for TO splitting
in my opinion VLENR should work for you however there are multiple option available you can click on the match code button and have a look for other parameter
Define the movement type,Source storage type , Destination storage type and Profile for the TO split which was define in the above steps

Zero stock check for a bulk storage type

Hi Experts,
We have a requirement to do the zero stock check for a bulk storage type. As a standard SAP it is not allowed to do the zero stock check for a bulk storage type. Is there any way to do this?
Thanks & Regards
Sanpan

Hi Sanpan
I am in a similar boat.
We have a Bulk warehouse with storage types with 'B' putaway strategy. We would also like to instigate zero stock check but get the message Zero stock check not supported in bulk storage areas with storage units
Message no. LT246
Did you find a solution to this? Or have you coded a solution?
Many thanks
Adam.

Storage unit types per storage type

Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx

Hi,
Goto SPRO --> Logistics Exection --> Warehouse Management --> Master data --> Define Storage type
In this node for your warehouse number and storage type combination activate the check box SUT check active.
Regards,
DilliB

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

Error in transfer order creation for sto type-- bulk storage

Hi ,
Can someone help to solve the following issue, while doing the Transfer order -- " The error is --> Missing definitions for block storage control ( B1 GB 04 ) "
config settings done are
1. in material master, view Wm-2, the LE qty--> 1, un --> to, SUT --> GB
2. in material master, view Wm-1, stock removal strategies > 004 (bulk storage), stk plcmt strategies > 004 (bulk storage) and bulk storage-->04
Thanks & Regards
Amjad

Hi
Try with OMM4 for block storage control, Also Check the section check indicator in OMM4.

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

Storage Type +++ in Storage Type Search Sequence

Hi Everyone,
Can someone please explain me what a '++' signifies in the Storage type Search Sequence. Like for a warehouse, for a storage type indicator, for a stock category etc. one has defined storage type: '++' in the first storage type column. What does this mean. I understand '***' might imply all storage types are equal, try all. But what does +++ mean?

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

SUT and Bin type Bulk storage type

Similar Messages

Maybe you are looking for