SUT Error at TO Creation from Non-SU to SU managed Storage type
Hi
I am creating TO to move quants from Non-SU Manged Storage type to SU managed Storage type, but at first its giving error saying Enter SUT for storage type. These Non-SU managed Storage types are not having SUT Check but SU Managed storage type is having SUT Check.
I tried to update WM view-2 with SUT and palletization but still issue exists.
I am having batch job for RLAUTA10 where TR is converted to TO but due to above issue , this batch job is getting failed.
I am deseperately trying to find the root cause and fix this asap. Let me know how this issue can be resolved??
Thanks
Like I mentioned earlier in my posts, SU's are typically not managed in interim storage types. Apparently, in this case, the PSA is an SU managed location and you are trying to move inventory from a non-SU ST to SU PSA ST. The isse that you are encountering is due to the reason that the palletization data maintained in the material master is defaulted during receipts rather than staging therefore, the SUT field in the TR remains blank. But, due to business reasons you are using SU's in PSA's then you'd have to venture into development options to include SU types during automatic converion of staging TRs into TOs.
Similar Messages
-
Change existing stock items from Non-Batch to Batch Management Method
Hi,
Any prerequisites before changing the existing stock items from Non-Batch to Batch Management method which have On hand stock qty? Please advise.
Thanks & Regards,
PriscillaHi
You can change the method only when, available Qty becomes zero.
OR
you can do one workaround :
Make Goods Issue of that Item and take value of stock in any GL,
and then change the method of that item, then make Goods Reciept by using that GL which was used in Goods Issue.
Regards
Manoj S -
Bin to bin transfer from SU managed storage type to NON SU storage type
Hi Experts ,
Kindly guide as how i can perform Bin to bin transfer from SU managed storage type to NON SU storage type
Thanks
JinoyThere is no particular technique for this. You can use single or collective method (LT01 or LT10).
Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
The SU number will be lost because you have moved the stock to a non SU storage type.
Regards,
Aroop -
Changed Material from non-batch to batch-managed
Dear Gurus,
Could anyone advise on the steps that I need to perform in order to change the material from non-batch to batch-managed in the material master?
There are stocks being captured in current month and previous month
Hope to hear from you soon.
Thank you in advance.Hi,
Batch management for existing material can not be done if it has stock and value.You can keep stock value NIL (By reversing) and then proceed with batch management.Batch Management you doing means , you just subdividing the material according to its characterstics of material.
The Customisation steps are:
1.Create Characterstics,
2.Create Class,
3.In material master, select classification view and tick batch management
4.Go to Logistic General->Batch Management->Batch Det and back Chk->Condition table-> Define Inventory Management Condition table
4.2 . Like wise Define Acess Sequense,
4.3.Strategy Types,
4.4.batch Serch Procedure,
4.5.Batch Srech Procedure and allocation,
4.6..Condition Record: Logistic->Central Function->Batch Management-> Batch Determination->Batch serch Stratergy->For Inventory Manament-> Create
Once you do all customising steps,Then you can receive the material as per you requirement.Example....Lets say H2SO4,you are receiving 98%,70% and 50% purity.According to you requirement and supply from Vendor you can keep in three different batches.This characterstic of material you can maintain in creating the characterstic ,,step-1. -
Converting from non-batch to batch management
Hi guys,
Can you tell what is the best strategy to convert a system from non-batch managed to batch managed? Batch management should have been implemented from the start, but my client just realized that mistake. This is knowing that we already have inventory and all kinds of transactional data: purchase orders, sales order, production orders...
I am looking for the less painfull strategy, as detailed as possible.
Thank you.
FotsoHI,
Hi,
Procedure to be followed to activate Batch Management for Materials: -
1. Mark Deletion Flag for all the Open Purchasing Documents of Materials
2. Technical Completion of Production Orders to cancel open Reservations of Materials
3. Create a Dummy Material for Material (Batch Management Active)
4. Generate details of Unrestricted Stock of Materials as per Bill of Entry
5. Transfer Stock of Materials to Dummy Material using Movement Type "309" in previous period (Stock will be transferred Bill of Entry wise)
6. Activate batch Management for Materials
7. Transfer Stock from Dummy Material to Materials
Note: -
1) If there is stock available in previous period and also stock available in current period then Transfer Posting from Material to Material can be done directly in previous period. (Comparison of Tables MARD and MARDH)
2) In case if there is stock in previous period but no stock available in current period then we have to post an initial stock entry using movement type "561" to generate stock in current period (Here Quantity = Stock in Previous period)
3) Reverse these Material Documents in previous period
There are several SAP notes that give some useful information:
30656 Change base unit of measure/batch mngt requirement
533383 Resetting batch management requirement
533377 Conversion of batch level
I hope this helps!
Thanks & Regards,
Kiran -
WM-PP : Backflush a material from different bins in the same storage Type
Hi Gurus,
We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
Thanks
Kris TLook like it's not possible using the SAP standard.
-
"Unable to check revocation" error while checking CDP from non-domain user account
Hi!
I use 3-tier PKI infrastructure:
Stand-alone offline Root CA: RootCA;
Stand-alone offline Intermediate subordinate CA: SubCA;
Enterprise CA: EntSubCA.
In certificate we have three CDP point for CRL check:
ldap:///, http:// and file://
I have Windows 2008 R2 server joined to domain.
I use command certutil –verify –urlfetch <filename.cer> >check.txt for revocation checking of certificate.
When I use domain user account for revocation checking, all OK.
I have access to any CDP and all fine.
But when i use local server user account, I haven't access to ldap:/// and process failed although all other links is OK.
My question is "why check fail with non-domain user accout while other CDP point succesfully verifed"?
Here is the logfile from local user:
Issuer:
CN=EntSubCA
DC=DED
DC=ROOT
Subject:
CN=servername.domain_name
Cert Serial Number: 5a896145000300006ee2
dwFlags = CA_VERIFY_FLAGS_ALLOW_UNTRUSTED_ROOT (0x1)
dwFlags = CA_VERIFY_FLAGS_IGNORE_OFFLINE (0x2)
dwFlags = CA_VERIFY_FLAGS_FULL_CHAIN_REVOCATION (0x8)
dwFlags = CA_VERIFY_FLAGS_CONSOLE_TRACE (0x20000000)
dwFlags = CA_VERIFY_FLAGS_DUMP_CHAIN (0x40000000)
ChainFlags = CERT_CHAIN_REVOCATION_CHECK_CHAIN (0x20000000)
HCCE_LOCAL_MACHINE
CERT_CHAIN_POLICY_BASE
-------- CERT_CHAIN_CONTEXT --------
ChainContext.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
ChainContext.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
ChainContext.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
ChainContext.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
SimpleChain.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
SimpleChain.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
SimpleChain.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
SimpleChain.dwRevocationFreshnessTime: 5 Days, 23 Hours, 15 Minutes, 48 Seconds
CertContext[0][0]: dwInfoStatus=102 dwErrorStatus=1000040
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
NotBefore: 05.02.2015 20:03
NotAfter: 05.02.2016 20:03
Subject: CN=servername.domain_name
Serial: 5a896145000300006ee2
SubjectAltName: DNS Name=servername.domain_name
Template: Machine
70 e4 6b 16 05 a1 62 e3 6d 24 96 ff 44 74 ee a2 3e ce df 18
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
Element.dwErrorStatus = CERT_TRUST_REVOCATION_STATUS_UNKNOWN (0x40)
Element.dwErrorStatus = CERT_TRUST_IS_OFFLINE_REVOCATION (0x1000000)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?cACertificate?base?objectClass=certificationAuthority
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crt
---------------- Certificate CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?certificateRevocationList?base?objectClass=cRLDistributionPoint
Verified "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
Verified "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Base CRL CDP ----------------
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
OK "Base CRL (018d)" Time: 0
[1.0] file://\\ca\crl\EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[1.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[1.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[1.0.2] http://webserver/crl/EntSubCA.crl
OK "Base CRL (018d)" Time: 4
[2.0] http://webserver/crl/EntSubCA.crl
Failed "CDP" Time: 0
Error retrieving URL: Logon failure: unknown user name or bad password. 0x8007052e (WIN32: 1326)
[2.0.0] ldap:///CN=EntSubCA,CN=ca,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=DED,DC=ROOT?deltaRevocationList?base?objectClass=cRLDistributionPoint
Old Base CRL "Delta CRL (018d)" Time: 0
[2.0.1] file://\\ca\crl\EntSubCA.crl
Old Base CRL "Delta CRL (018d)" Time: 4
[2.0.2] http://webserver/crl/EntSubCA.crl
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 018d:
Issuer: CN=EntSubCA, DC=DED, DC=ROOT
33 af 4d be 0e 35 45 94 bc 8b 3f d9 c1 60 e7 0c c4 83 17 b6
Application[0] = 1.3.6.1.5.5.7.3.2 Client Authentication
Application[1] = 1.3.6.1.5.5.7.3.1 Server Authentication
CertContext[0][1]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=SubCA
NotBefore: 13.11.2014 19:12
NotAfter: 13.11.2017 19:22
Subject: CN=EntSubCA, DC=DED, DC=ROOT
Serial: 6109015b000100000008
Template: SubCA
9b 04 17 9f c5 fe 52 ca a5 58 49 6c c6 18 fa db 13 b3 92 9e
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Failed "AIA" Time: 0
Error retrieving URL: The network path was not found. 0x80070035 (WIN32: 53)
file://\\sub_ca\CertEnroll\sub_ca_SubCA(1).crt
Verified "Certificate (0)" Time: 0
[1.0] file://\\ca\crl\SubCA.crt
Verified "Certificate (0)" Time: 4
[2.0] http://webserver/crl/SubCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (32)" Time: 0
[0.0] file://\\ca\crl\SubCA.crl
Verified "Base CRL (32)" Time: 4
[1.0] http://webserver/crl/SubCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 32:
Issuer: CN=SubCA
8d a9 9d 51 65 a3 8e 77 02 22 40 57 62 70 e8 f6 c5 2e 60 1e
CertContext[0][2]: dwInfoStatus=102 dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 28.05.2008 12:09
NotAfter: 28.05.2058 12:19
Subject: CN=SubCA
Serial: 616bd19f000100000004
Template: SubCA
06 d2 47 e7 dc 8f a7 97 a2 b8 c3 92 03 19 24 0c 47 45 22 14
Element.dwInfoStatus = CERT_TRUST_HAS_KEY_MATCH_ISSUER (0x2)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 4
[0.0] http://webserver/crl/RootCA.crl
Verified "Base CRL (1c)" Time: 0
[1.0] file://\\ca\crl\RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
CertContext[0][3]: dwInfoStatus=10c dwErrorStatus=0
Issuer: CN=RootCA
NotBefore: 27.05.2008 16:10
NotAfter: 27.05.2110 16:20
Subject: CN=RootCA
Serial: 258de6fbd3bbab92460530e9e9f10536
5d e4 56 38 13 0a 52 aa 66 51 25 61 19 33 c9 d7 a2 c7 dd 38
Element.dwInfoStatus = CERT_TRUST_HAS_NAME_MATCH_ISSUER (0x4)
Element.dwInfoStatus = CERT_TRUST_IS_SELF_SIGNED (0x8)
Element.dwInfoStatus = CERT_TRUST_HAS_PREFERRED_ISSUER (0x100)
---------------- Certificate AIA ----------------
Verified "Certificate (0)" Time: 0
[0.0] file://\\ca\crl\RootCA.crt
Verified "Certificate (0)" Time: 4
[1.0] http://webserver/crl/RootCA.crt
---------------- Certificate CDP ----------------
Verified "Base CRL (1c)" Time: 0
[0.0] file://\\ca\crl\RootCA.crl
Verified "Base CRL (1c)" Time: 4
[1.0] http://webserver/crl/RootCA.crl
---------------- Base CRL CDP ----------------
No URLs "None" Time: 0
---------------- Certificate OCSP ----------------
No URLs "None" Time: 0
CRL 1c:
Issuer: CN=RootCA
dc 98 2f 8d 16 9c 64 6e b2 74 89 95 9a 6c 1b 77 fd 58 63 fb
Issuance[0] = 1.2.700.113556.1.4.7000.233.28688.7.167403.1102261.1593578.2302197.1
Exclude leaf cert:
5b 8d 96 39 f8 a3 6f af f3 89 bc 8d 78 e2 da 53 21 b8 ff aa
Full chain:
ca 99 30 47 9b ad ab ce 97 cc 70 80 a5 4e 11 b3 1a 83 98 78
Verified Issuance Policies: None
Verified Application Policies:
1.3.6.1.5.5.7.3.2 Client Authentication
1.3.6.1.5.5.7.3.1 Server Authentication
ERROR: Verifying leaf certificate revocation status returned The revocation function was unable to check revocation because the revocation server was offline. 0x80092013 (-2146885613)
CertUtil: The revocation function was unable to check revocation because the revocation server was offline.
CertUtil: -verify command completed successfully.What you have discovered is the reason to *not* use LDAP URLs for CDP and AIA extensions in your PKI. To access those URLs, the account must access to the URLs. In your output, it is quite clear that the local account does not have necessary permissions
(you also use FILE URLs for publication, which again is not recommended).
The best practice is to use a single URL for the CDP extension. It should be an HTTP URL that is hosted on a highly available (internally and externally accessible) Web cluster.
For the AIA extension, it should contain two URLs: one for the CA certificate - again to an internally and externally accessible, highly available Web cluster and one for the OCSP service - also
an internally and externally accessible, highly available Web cluster.
the other issue is that the root CA is *not* trusted when run by a non-domain account. How are you adding the trusted root CA. It is recommended to do this by running
certutil -dspublish -f RootCA.crt.
This will ensure that the computer account trusts the root CA. In your output, the root CA certificate is not trusted.
Brian -
Error during PO creation from contract
Hi all,
my requirement is to change the Handling type field of that purchase order that is referred from contract using the BADI ME_PROCESS_PO_CUST and Method PROCESS_ITEM. but i am getting an error message " Data from Business Add-In ME_PROCESS_PO_CUST not transferred successfully " . but when we are pressing ENTER this error was by passed.
This error is occuring only when i am trying to change the Handling type field.
This error does not occur when i am changing the Track number.
Note: i am trying to create a PO that is referred to a contract.
Thanks.Hi Santosh,
362 is not maintained for BASB,but its maintained for condition type JMO1(IN:A/P BED Deductable) & JMO2(IN: A/P BED non deduct )in <b>AltCTy</b> field.
And For BASB 605 is maintained in the field AltCBV.
Can you Pls explain the significance of this alternative calculation type.
Regds -
Hi,
I am using SharePoint 2013 Enterprise with the March CU.
I created a project site template with libraries, lists and workflows and saved it as a template with content. When I try to create a new site using this template, I get the error pasted at the bottom.
I was using SharePoint designer workflow custom activities created in VS2012. I uninstalled those and decided to call a web service directly from SharePoint designer. The workflows work fine inside of the site which I want to create a project template
from. When creating a new site from the template, SharePoint complains about a missing workflow XAML feature.
Do I have some leftover references to the custom features? Does anyone know how to resolve this issue?
<nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e'
from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c.
Client ActivityId : 69e6449c-9c3c-f090-404f
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8107058a): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c'
was not found. HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +0
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +293
[SPException: Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_13602d27_d83f_48bb_b73b_54ef9df29a0e' from scope '/SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c' was not found.
HTTP headers received from the server - ActivityId: 22e889a4-6edb-4b0b-8e09-9bb04483b991. NodeId: SERVERNAME. Scope: /SharePoint/default/cbb1afbb-8112-47b3-82b1-6e1f47923d9a/20857512-9689-4361-a887-04644d740b1c. Client ActivityId : 69e6449c-9c3c-f090-404f]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) +889
Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
+928
Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +532
Microsoft.SharePoint.ApplicationPages.TemplatePickerUtil.ApplyWebTemplateAndRedirect(SPWeb Web, String strWebTemplate, Nullable`1 bSharedNav, Boolean bOnTopNav, Boolean bOnQuickLaunch, Page page, Boolean bDeleteOnError, SPFeatureDependencyErrorBehavior
featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) +2076
Microsoft.SharePoint.ApplicationPages.NewSubwebPage.BtnCreateSubweb_Click(Object sender, EventArgs e) +861
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +146
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3586
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18045Hi Jerry Choinski,
For your error, It could possibly have something to do with that the workflow did not publish before saving your project site as a template.
The "Elements.xml" file, which is packaged within the "wsp" solution file contains 2 "<File" elements. One file element represents the XAML file, and the other
represents the WF association file. If the WSPublishState value for each "<File" element differ (one has a value of "3" and the other a value of "1"), the error will occur. For solving your problem, please update the WSPublishState value for both "<File"
elements to “3”.
PropertyName="WSPublishState"
Value="3"
Also note that the WSPublishState property is also duplicated within the "MetaInfo" property, so both occurrences should be updated. Then the resulting files need
to be re-packaged into the template.
Reference :
http://social.technet.microsoft.com/Forums/en-us/be41f1c5-1dfb-4869-9a52-1c93902bfd91/microsoftworkflowclientactivitynotfoundexception-when-deploying-solution-with-workflow
Please inform me freely if you have any questions.
Thanks -
Error in PO creation from SRM 7.01 to ECC 6.0
Hi Gurus,
Please throw some light on my isssue.
We are developing Plan Driven Procurement Business Scenario in SRM.
Current System details are ECC 6.0 EHP4, PI 7.1 & SRM 7.01.
We have done all the configuration settings in ECC, PI & SRM.
PR created in ECC 6.0 and External source of Supply tab generated in PR, processed through SAP PI successfully to SRM 7.01 and sent confirmation back to ECC. We are using ABAP Proxies and standard content for this PDP Scenario.
1) Using PurchaseRequestERPSourcingRequest_Out as an outbound interface and PurchaseRequestERPSourcingRequest_In as Inbound interface.
2) SRM we are using PurchaseRequestERPSourcingConfirmation_Out as an Outbound Interface and PurchaseRequestERPSourcingConfirmation_In as an Inbound interface in ECC.
3) Using PurchaseOrderERPRequest_Out_V1 as an Outbound interface and PurchaseOrderERPRequest_In_V1 as Inbound interface.
We are facing problem while getting confirmation back to SRM 7.01 from ECC as the interface is not getting triggered in ECC.
We are using
4) Using PurchaseOrderERPConfirmation_Out as an Outbound interface and PurchaseOrderERPConfirmation_In as an Inbound interface.
Please provide inputs to resolve the issue.
AshokHi Imran,
It is compatible, But still for confirmation please see the product availability matrix.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/support/pam/pam.html?smpsrv=https%3A%2F%2Fwebsmp203.sap-ag.de#pvnr=01200615320900003495&ts=4&pt=t%7Co
Best regards,
Rohit -
Getting error in project creation from Appropriation Request
Hi SAPians,
When I am creating a project from appropriation request having same coding mask option(Option 1 in AR type), the project structure is not created as desired. Like I am copying a project from template I-00001 with WBS I-00001 at first level. But when I am creating project in AR by copying this std. project , created project definition is I-00001 and level 1 WBS is I-00001-01. Because of this project entire project structure has changed.
can anybody help me this new created project structure as desired.
Thanks & Regards
RamshaHi,
we also faces the same issue since replace optionis not there on IMA11, what we did was, we created only 1 st level wbs through IMA11 and then inluded the rest using CJ20N using template.
Regards,
SL -
Repair error in material documents (from non-valuated to valuated)
Hi Gurus,
We have a urgent problem, for one mistake in material document type, the valuated flag was change to not valuated, it was create 500 material document without financial document. Now, the mistake was corrected and now generates again material documents with financial documents for this material type. My questios is: is there any way (programs develop for you, so on) to re-generate the financial document for material document non-valuated?
Really, I don´t think so but.....
Thanks in advance & regardsNo you can not do that except you reverse all the non valuated material document and the recevie again then only you can generate the FI documents
-
Problem with STO from non-WM to WM-HU
Hi,
We have found out recently that we cannot move materials from non-WM to WM-HU storage locations with STO (313-315). When we are trying to post 313 from non-WM storage location, system gives error "ILN basis no. for plant XXXX, stor.locat. XXXX or whse number not found" where XXXX is the plant id and storage location id for non-WM stor.loc., so it should not have any ILN configured.
We have been using this functionality for a long time, last time in Septmeber. But since the problem applies to all materials and all STOs between non-WM and WM-HU, the problem is not connected to material master or specific storage location but should be some general setting in the system.
Does anybody has any idea where to look for?
Best regards,
Ewa
Edited by: Ewa Bozejewicz on Nov 13, 2009 2:23 PMHello,
You probably already solved your problem (hope for you!) anyway it should have to do with SSCC number
Glossary: International Location Number (ILN)
Check the customozing under Logistic General - >Handling Unit Management -->External Identification
Regards
Claudio -
SUT selection in TO from storage type to PSA
Hi All,
The business process is Kanban replenishment where the CCID is scanned for TR creation for demand. TR then automatically converting to TO (movement type- 350). In TO we are getting the storage Unit type selected. need to know the basis of storage unit type selection.
Further details of the movement as eg.
Movement is from storage Type 030 to PSA.
Storage Type 030 has Bulk as Put away strategy and FiFo as Removal Strategy.
It is SUT check active.
warehouse is HU and SU managed.
Two kinds of SUT is there in the storage type 030 - Box and Pallet (L).
Let me know the basis of SUT selection in above TO.
The issue is that different material selects different SUT and there is no consistency. I checked for GR date, Quants, and material master, Move,ment Type data.
Need help from all experts.
Thanks,
Shankar KumarHi Shankar,
As per standard SAP flow,
Step 1 ) system picks the stock removal indicator from the WM1 view of material master
Step 2) Picks the storage type from the T334T table based on the removal indicator from step1
Step 3) Once the storage type selected it goes and check the available Quant in the storage type
Step 4) After selection of all the Quant it sorts the selected record based on the GR date
Step 5) Once the first quant selected it pass all the Quant information to internal table
Step 6) Checks the required quantity minus quantity of first quant selected if the balance is greater then zero process continue from step 2 till the time required quantity - allocated quantity =0
Now your query how system selects the Storage unit type, as you can see from above steps system selects the Quant and the quant is already having the Storage unit type assigned. in the below example i have four quant in the stock and my requirement is for 120 PC, you can see the Sequence in Transfer order system stamps the TO line item based on the Storage type search (003,002 in below case) and then based on ascending order of Goods receipt it selects the Quant from within the Storage unit
in the below example
Storage type search strategy (Entry into T334T)
Stock in warehouse -
BRFPlus: error during application creation
Hi,
I'm getting an error in FDT_Workbench when trying to create an application with non-local ( 'System' or 'Customizing') storage type. After selecting development package and transport request, it comes back with two error messages:
*. Check if a changeable development package is assigned to the application
*. Object can only be changed in its original system Display Help
If anyone got any ideas pls let me know.
Thanks!
Sergesolved - oss note 1282506
Maybe you are looking for
-
I have a hearing impairment and use hearing aids but I can only understand about 33% of the dialogue on videos I stream on Apple TV. Is there any way I can connect bluetooth headset to Apple TV or HDTV set?
-
Why did Adobe get rid of making nice neat PDF contact sheets directly in Bridge??
I know there is an output module, but it is not really any help! It still uses photoshop to create multiple seperate PSD files and takes forever! It is VERY important at my job to make contact sheets, we need them to go through hundreds of pictures.
-
NullPointer when getting pageFlow bean from backingBean
Hi, I use JDev11g - full ADF stack. In the backing bean of a page, I use this method : public QueryFilterBean getFilterBean() { FacesContext fc=FacesContext.getCurrentInstance(); return (QueryFilterBean) fc.getApplication().getExp
-
Can't authorize ADE, get an activation server error - help?
can't authorize ADE, get an activation server error - help?
-
Adding panel into JDialog at run time problem
Hi , I am adding one component at a time into the jdialog at run time. What I do , when I launch jdialog instance first time I added one component into the jdialog. when OI press next button it removes this component and adding next one , but the pro