SUT issue while replenishment of fix bin..

Hello,
I have two storage type 035 overstock with SUT IP and fix bin storage type 005 with SUT allowed as F1 only. While replenishment, from over stock 035 to 005 fix bin with transaction code LP21 TR gets created. I am getting SUT related issue while converting TR to TO as SUT IP from 035 is not allowed for storage type 005 which has allowed SUT as F1. I can resolve this error by manual input as F1 SUT while creating TO. But for may of such TRs it is time consuming task. Is there any way by which we can convert the TR to TO without manual input of SUT as F1? Please note that, I don't want to allow SUT of 035 to fix bin in SUT configuration.
Thanks,
Milind

Hello Jürgen,
Thanks!
I am closing this forum with summering the resolution as below.
(1) The only way to achieve this in standard way is, to allow both SUT IP and F1 for storage type 005 in customization. . If there is business constrain of not to allow SUT IP for storage type IP then, either we need to manually change SUT or look for development.
I am proposing below simple development in point (2)
(2) Main principle of development is to use TO creation functional module and add default value of SUT F1. We can use this in RF customized transaction.
Thanks again Manish and Jürgen,
Milind

Similar Messages

Automatic Replenishment for Fixed Bins

Hi,
We have successfully implemented Automatic Replenishment for our Fixed Bins when Picking Transfer Order is Confirmed. We have used the scenario where full stock removal (a palletized quantity) is removed from the source bin and only the Replenishment quantity is placed in the destination bin with the difference quantity placed into a Return bin in a consolidation storage type. This is accomplished in a single Transfer Order. We use RF Scanning to confirm the Fixed Bin Replenishment.
Our problem now is the following:
There is no positive instruction that the full quantity must be removed from the Source bin and the remainder quantity placed into the Return bin.
Question:
Can the Replenishment Transfer Order be split automatically into two. One to Replenish the Fixed Bin and the other to move the remainder to the Return bin.
Our SAP system is: SAP R/3 Enterprise 4.7
Thanks and regards,
Mike

Hi,
Thank you for your prompt reply. Through all my investigation you have confirmed the conclusion that I suspected. Thank you.
Is there possibly a different solution? Is there a User Exit or Function Module that can be called/used to create another TO while creating the automatic replenishment TO? We could then use this separately to move the stock to the consolidation area.
Thanks,
Mike

Replenishment of fixed bins for batch managed materials.

WM - Replenishment of Fixed Bins. Batch selection and full pallet selection
My issue is as follows: I am performing the replenishment of fixed bin based on SD deliveries. Stock is batch managed and batch selection is based on the shortest expiry date. If there is both a partial and full pallet of a particular batch of a material in the source warehouse, the full pallet will always be proposed in the TO, before the partial pallet. Is there a way of forcing the selection of a partial pallet before the full pallet?

Removal of material based on quantities could be driven by using picking strategy 'M'. This is closest option that I could think of that matches your requirement. If this does not meet your requirements then you may have use a custom picking strategy via exit MWMTO004.

Putaway Strategy for replenishment of fixed bins - SU destination bin

My client is using ECC 6.0 Retail and using WM.
After creating the TR for the replenishment of the fixed bins according to the bin situtation using LP21, we create TOs using LB11 for article. At the TO creation, the system creates a new Quant and automatically proposes the SU# from the source bin to the destination bin. We allow addition to stock but not mixed SUs. However you can manually overwrite and input the current SU destination bin but this is very time consuming. Is there a way to have this process done automatically?
Thanks Gaetan

Hi Gaetan,
It seems this topic is extremly important recently...e.g.:
Addition to storage unit
I'm not aware of anything in standard SAP that would help you to realize your scenario. (if it is very important maybe it should be indicated to SAP AG. However, in a WH where SU management is active the material flow is realized trough SUs > if warehouse workers add the stock physically from one SU to other SU it means additional work for them physically and therefore in SAP too).
Regards,
Csaba

Replenishment for fixed bins in WM

Hello Experts,
I have a need to create auto TOs for replenishing fixed bins.If I am correct for auto TOs,i dont need to run LP21.
I have defined a custom WM movement type for 319.In the custom movement type I have defined source storage type and destination storagetype and selected Auto TO in background.
I have defined replenishment control for storage type-- entered the movement type and selected repleishment method '1'.
Can some one suggest me if i am missing some thing?
Do i need to define the search sequense as putaway to be directed to fixed bin storage type from other storage types?
Thanks in Advance

Hi,
Yes, you are correct, you need to define search sequence for the storage types and for the replenishment storage types as well.
Hope it is clear.
Aktar

SAP WM-Fixed bin replenishment

Hi
While run replenishmnet for the fixed bin through LP21 ,system is generating individual Transfer orders for each Storage Bins.How to generate to single Transfer Order for all the bins selected in LP21.
Most urgent pls help
Regards
alagukumaran

Hi Aktar
Thanks for the reply
For the stoarge type if the user selects some 100 fixed storage bins to be replenished from the another storage bins ,currently system triggers 100 Transfer requirenment and will go to LB10 to convert TR to TO.
Need to generate one TO ,having replenishment details of all 100 fixed bins through LP21 ,How to proceed .kindly help me.
Regards
Kumar

Open Transfer Requirements - Fixed Bin replenishment

We have a situation where TR's remiained open for lack of stock in source Storage types. When these Tr's are closed as completed, they re-appear due to min/max. It is being cumbersome to check each TR if this was due to LP21 or a genuine TR. could some one advise how to get around this issue. Mov type 319 is configured to ctrate TO from TR autommatically.
appreciate any help on this.
thanks

What is a "genuine" TR?
One idea:
When listing TRs in LB10 you can see the movement type. For fix bin replenishment you can define which movement type should be used by system. Based on this you can distinguish between replenishment related TRs and other TRs.

One t.o. fixed bin replenishment

Hello, and good day
I have a question about replenishing fixed bins. We currenty use two step with TR-TO mirror TR-TO creation automated via batch job and it's working fine. The issue is that the replenishments are slowed to much waiting for the second t.o. that brings the stock to the fixed picking bin.
My question: is one step replenishment a standard SAP function and please guide me on the steps to implement if so.
Or provide me with any links or documentation on the process please, So far I have only been able to find info on the two step process, I have only seen some posts mentioning movement 320 for this but it wasn't clear to me if there where specificaly refering to a one step replenishment.
When I say one step I mean to say only one transfer order - source = genaral storage - destination = fixed bin
user in genaral storage can view the t.o. for source bin and do the physical move then another user access the same t.o. and confirm when the stock is placed into the fixed bin, so in practice it's still a two step but in the system user only needs one t.o.
we have WM active obv

Hi
Reason for error message "LP301- no material relevant for stock replenishment found" is because the below statement fails to find the record from table MLGT on the set criteria, Looks like there is a mismatch in the LP21 selection entry screen (Plant, warehouse , fixed bin storage type, requirement number, requirement type) and master data which you defined. check the entry on the selection screen
or the another way to check is goto SE11 enter table MLGT
on the selection screen pass the warehouse number, Pickface storage type(005) and execute, check whether system is giving you any result or not
Make sure the material is extended for pick face storage type
fixed bin is defined in the material master WM2 view, the bin should be from pickface storage type 005

Sap wms fixed bin replenishment

hi experts,
i am creating fixed bin replenishment the max bin qty 40, min 10 and replenishment qty 50
and i try to create LP21   fil the fields the whno storage type and bin and executed but the replenishment is not happened . the automatic TR also not triggering so plz tell me where is the setting we need

Hi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock     =   10
Maximum stock     = 100
Replenishment qty =   40
Storage bin stock =    5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh

WM : Automatic replenishment TO for fixed bin from warious storage types

Hi Gurus,
We have storage type 011 - fixed Bin storage type , 022 - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
Can anyone advise me on this? I will be really grateful.
Kind Regards
Raja Ram

Hi,
Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
Thanks & Regards
Raja Ram

HT3743 HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?

If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone.

AutoTOs for replenishing fixed bins

Hello Experts,
I have a need to create auto TOs for replenishing fixed bins.If I am correct for auto TOs,i dont need to run LP21.
I have defined a custom WM movement type for 319.In the custom movement type I have defined source storage type and destination storagetype and selected Auto TO in background.
I have defined replenishment control for storage type-- entered the movement type and selected repleishment method '1'.
I have also defined the search sequense as putaway to be directed to fixed bin storage type from other storage types.
For some reason when , Its not creating the Automatic transfer orders.
Please advise..

Hi,
I think, you are missing "A" indicator at the movement type level and at the storage type level. Please check.
Thanks
Aktar
Edited by: Aktar Ahmed Shaik on Feb 14, 2008 5:26 PM

Reg Storage location control when pulled materials via fixed bin replenishm

We are Using Storagelocation Control Functionality in WM
We have below Storage locations
RW01 - Raw Material Storing
PD01 - Materials staged for Production Lines
I have setup RW01 as Standard Storage location and PD01 as 'not copied to TR'
When i try to do bin to bin tranfer raw material to production lines From Bin in RW01 to Bin in PD01, TO has RW01 as expected, i Run posting change background job and this functionality is working fine
We would be using Fixed bin replenishment strategy to stage materials for productions from raw materials storage
I run LP21 for PD01, it has created TR but has storage location PD01 instead of RW01.
PD01 shouldnt have copied as i have set 'Not to be copied to TR' for PD01
Fixed bin replenishment doesnt support storage location control? does we need to go for customization ?
Please help

Please help
Bin to Bin is working fine as per storage location control functionality set-up
We have issue with fixed bin replenishment combined with storage location control
Please share your inputs, Thank you
While debugging we relaixed SAP doesnt check storage location control config at all while doing fixed bin replenishment, only custom solution to force system to check storage location control config and assign storage location is TR?
Edited by: Sasi nagireddy on Jul 18, 2011 8:34 AM

Performance issue while opening the report

HI,
I am working BO XI R3.1.there is performance issue while opening the report in BO Solris Server but on window server it is compratively fast.
we have few reports which contains 5 fixed prompt 7 optional prompt.
out of 5 fixed prompt 3 prompt is static (it contains 3 -4 record only )which is coming from materlied view.
we have already use many thing for improve performance in report like-
1) Index Awareness
2) Aggregate Awareness
3) Array fatch size-250
3) Aray bind time -32767
4) Login time out -600
the issue is that before refresh opening the report iteslf taking time 1.30 min on BO solris server but same report taking time in BO window server 45 sec. even we import on others BO solris server it is taking same time as per old solris server(1.30 min).
when we close the trace in solris server than it is taking 1.15 sec time.it should not be intial phase it is not hitting more on database.so why it is taking that much time while opening the report.
could you please guide us where exectly problem is there and how we can improve performance for opening the report.In case the problem related to solris server so what would be and how can we rectify.
Incase any further input require for the same feel free to ask me.

Hi Kumar,
If this is happening with all the reports then this issue seems to be due to firewall or security settings of Solaris OS.
Please try to lower down the security level in solaris and test for the issue.
Regards,
Chaitanya Deshpande

Embedded JMS/OC4J issue while running an application in Jdeveloper 10.1.3.2

Hi,
I am facing an issue while running an application on my laptop.I downloaded Jdeveloper 10.1.3.2.Installed Jheadstart along with that.
Created a new application specified in HR demo.When I run the application I get following messages,After that it does not show my application pages.It does not even open browser window.
[waiting for the server to complete its initialization...]
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
07/08/29 18:01:55 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized
When I delete persistnce directory files under embedded oc4j (specifically jms.state), It logs following messages.But it does not run my application pages and not even open browser window to display some error.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config>
C:jdevstudio10132\jdk\bin\javaw.exe -client -classpath C:jdevstudio10132\j2ee\home\oc4j.jar;C:jdevstudio10132\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
07/08/29 18:06:16 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized.
I tried by creating another standalone application with simple html page, it throws same logs and does not show up browser window.I even tried with Jdeveloper 10.1.3.3, but still same issue .
can you please throw some light on this issue and any suggestion for resolutions.
Thanks.

Can someone throw somelight on this issue?
I posted the same issue in Jdeveloper forum but did not receive any reply .appreciate your suggestions.
Thanks
Sekar.

SUT issue while replenishment of fix bin..

Similar Messages

Maybe you are looking for