Suzuki GP-3 not visible in GB via USB

I'm new to OS X and am struggling to get my Suzuki digital piano to be seen by GarageBand.
When I first connected the piano via USB I received "MIDI conflict" type errors from GB. So, I installed the Suzuki USB-Midi driver for OS X dated June 19, 2005. Since the install, I no longer receive any error messages from GB, however, I cannot find any MIDI devices in the properties panel.
Does anyone have any suggestions?

Did you find anything? I have two Mightex USB cameras hooked up and believe that I might be having the same problem.
I can actually get both devices to show up in AMCAP, but the 2nd camera that I have hooked up to the computer doesn't show up in NI-MAX.
I have spoken with the camera manufacturer and they have verified that these DirectShow drivers have worked on old versions of LabVIEW. Please get back to me if you know anything regarding this error.

Similar Messages

HT1296 What is causing my iPad 3 not to be charging via USB, even if I connect it to a USB 3.0 port?

What is causing my iPad 3 not to be charging via USB, even if I connect it to a USB 3.0 port?

iPad Charging
"The fastest way to charge your iPad is with the included 10W USB Power Adapter.
iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter.
When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain."

Manually sync Notes and Safari bookmarks via USB cable for iOS device and an iMac with MacOS 10.7 Lion and iTunes 11

"I'm aware that with MacOS 10.8 Mountain Lion there is no support for USB cable sync of iOS devices." Notes and Safari Bookmarks cannot longer be sync via USB cable with iTunes. For owners of iPhone 3G that cannot upgraded the device to a version higher than iOS 4.2, syncing Notes and Safari Bookmarks via usb cable with iTunes is the only option we have. There is no iCloud integration for Notes and Safari Bookmarks under iOS 4.2. I'm not updating to MacOS 10.8, because there is no way to sync Notes and Safari Bookmarks via cable. So I won't be able to sync those anymore unless I upgrade to a newer model of iPhone. I'm not into a new hardware investment, at least not for now. I just want to know if iTunes 11 running in MacOS 10.7 Lion still have the functionality of sync Notes and Safari Bookmarks via USB cable.

Mac OS 10.7.5 and iTunes 11.0.4.
jlbr wrote:
I want to confirm if "other" still appears with iTunes 11 and MacOS 10.7 for sync Notes and Safari Bookmarks:
Yes.
If you are sincing Notes via iCloud, iTunes will tell you so.
If you change the iDevice - Settings> iCloud > Notes - Off, they sync (or not sync) thru iTunes (either wifi or cable).
So my question now would be:
Is "Notes" manual sync checkbox option provided under "Others" in iTunes 11.0.1 with MacOS 10.7 Lion?
If you change the iDevice - Settings> iCloud > Notes - Off, then yes.

Time Capsule not visible when connecting via range extender

Hi,
I have configured a TP-Link WA750RE to expand the range of my Time Capsule's wireless network. The range extender works fine for surfing the web etc., but the Time Capsule doesn't show up as my Time Machine backup device and the Time Capsule is not visible in my Airport Utility. What's even stranger is that when I click on "Configure other" (shift + command + o) in Airport Utility and type in my Time Capsule's IP-address and password, I can still access the devices' configuration menu.
When I move my Macbook very close to my Time Machine to connect directly to the wireless network, leaving out the range extender, none of the above mentioned problems occur. The TP-Link range extender has no NAT or port configuration that could possibly cause this problem, so I'm out of ideas for a way to solve this problem.
Thank you in advance for your help.

A non-apple range extender is not passing the protocols that apple uses.. eg bonjour.. This is a standard problem and why you stick with using Apple's own routers for extensions.

IOS devices not recognized in iTunes via USB

I am on a Windows 7 x64 home-built computer and I am pretty technically inclined, but this one problem has been bugging me for quite a while now.
I am pleased that Apple wants its devices to sync wirelessly with iTunes from now on, but there are times when it is necessary to plug in the device via USB, such as when transferring large files.
However, in the last few weeks/months, I have noticed that iTunes will not recognize my iPhone 4 nor my iPad 2 when they are plugged in via USB. The computer recognizes the devices, drivers are installed properly, and I can see the devices in Windows Explorer, getting photos off of them that way. However, iTunes does not show the devices with that "plugged in" icon next to them, only the usual sync/eject icon.
This is also a problem because sometimes iTunes just won't "see" the devices, but sometimes it will. Regardless, I need to be able to tether them sometimes for transferring relatively large files via USB. Wi-Fi just isn't fast enough. I suppose I may have to disable Wireless syncing altogether, but I fear that may not fix the problem, because it was syncing via USB just fine in the early weeks of iOS 5 and with wireless syncing enabled. I do have the latest iTunes, I do have the latest firmware for both devices, and I have rebooted both my computer and the devices several times lately, all without effect.
I've done all the simple solutions and none of them have worked. Can anyone explain what's going on and, more importantly, what I can do about it?

Yeah, I've tried 5 out of the 7 steps shown in their troubleshooter. The sixth step is one that is a major pain and I doubt would fix the problem: Reinstall iTunes. I know enough about PCs to feel about 80% confident that this step would not fix the issue. Plus, it's a major hassle with re-adding music to the collection. Nevertheless, I will look at it as a last ditch effort.
The seventh step is extremely vague and doesn't really help. "There might be a software conflict." Fine, but there's no way to find any such conflict, if one even exists in the first place, without a heavy dose of trial-and-error, several hours of time, dozens of reboots, and the patience of Job.
However, they do list some other steps that I'll try when I get home, such as making sure certain services are installed and running. I'll post my results here. Thanks, wiclee.

Macbook Air not recognizing anything connected via USB?

My MB Air is not recognizing anything that I connect via USB...camera, harmony remote, phone, toys - nothing! Nothing is showing up as being recongnized...anyone else having this problem? I have tried virtually every device...what the heck?

SMC reset and re verify
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If no USB device of any kind can be found contact Apple for appt. for free in shop full diagnostic and likely parts replacement.

Computer with Windows Vista SP 2 and Desktop 5.0.0.11 does not recognize the BB via USB

Hi all,
I have had an 8100 for some time. Recently the desktop will communicate to the 8100 via bluetooth but Windows does not recognize the 8100 when I plug it in via USB. I have tried downloading and reinstall the desktop with no luck.
Suggestions?
Jim

Hi and Welcome to the Forums!
Here is the list of troubleshooting KB's...hopefully something will be useful:
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My Epson XP - 400 will not print wirelessly or via USB. The documents just sits in the print queue while the computer is "searching for the printer". I set up the printer on the computer and it is connected to the wireless network.

I'm unable to print wirelessly or connected via USB with my Epson XP-400. The computer continues to say it's searching for the printer even though the printer is set up on the computer, the printer is connected to the wireless network and the USB is plugged into the computer.

Try resetting your Mac's printing system as shown here:
http://support.apple.com/kb/PH14141

Nokia PC Suite not detecting my N79 via USB.

Hello!
Got my N79 yesterday and having a bit of a problem with getting the Nokia PC Suite finding it. The program tells me to plug in the phone and when i do this nothing happens. I'm connecting via USB with a CA-101 cable.
Have tried reinstalling the Pc Suite a couple of time and same with the USB connectivity drivers.
I'm using XP Pro x64 SP2 on my PC and the Nokie PC Suite version is 7.1.26.0.
Any solutions?
Regards
Erik

Is the settings in your N79 for the data cable set to "PC Suite Mode" or "Always Ask on Connection"?
Did you try a different PC?
Is the phone getting detected as a removable drive when you connect it in Mass storage mode?
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Active UserConcurrent Program output not visible when submitted via CONCSUB

Hi All,
I am not able to see the concurrent program "Active Users" output from EBS front end, when i submit the Active users request using CONCSUB utility.
After submitting Active user program from CONCSUB, when i go to front end and and try to view output, "View Output" button is disable.
Any idea why is "View Output button" disable.
When i submit the same request from front end, it shows me output.
Thanks,
Prasad

Prasad,
What is the CONCSUB syntax you use?
What is the value of "Concurrent:Report Access Level" profile option?
Note: 200272.1 - How can a user see the output and logs of other users?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=200272.1
Note: 413382.1 - How To View The Output Of A Request Launched By Someone Else
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=413382.1
Regards,
Hussein

My iPod touch is not recognized by my computer or by iTunes. It will not charge or sync via USB cord. I'm not sure what generation it is, I've had it about 2 years. HELP!

I can't do anything between the computer and the iPod... cannot sync purchases, music, anything... I tried resetting my iPod, which was a HUGE mistake because now, none of my music is on it and I can't sync the thousands of songs I've purchased to it... all I am able to use it for is to download directly to the iPod via WiFi. (Which I do, but mostly for apps... I don't want to waste money duplicating music purchases.) I've tried the troubleshooting thru iTunes and nothing has helped. Please help!

Also go to this link http://www.apple.com/support/ipodtouch/assistant/ipodtouch/ and this one http://www.apple.com/support/ipodtouch/

Could not connect Nokia 6303i via USB cable to Win...

Hello guys in this forum
Hello driver development group
This is not a question for help, but more a question for sharing experiences. I recently bought a new Nokia 6303i, worked a little bit with it and finally I wanted to connect it to the PC to enter the contacts from my old phone with the computer keyboard instead of the phonebook keys.
Well, the installation sounded quite easy at a first glance: Download the Nokia OVI suite, connect the Nokia phone to the PC and go on. I did that way, but it just did not work.
The PC I'm using is an Acer laptop, Windows 7 64 Bit system, MS Office 2003, Visual Studio 2003/2005, Firefox, Thunderbird and VMWare Workstation, Comodo Firewall and free-av virus scanner installed. Nothing special, nothing I could not handle, especially no games or other special hardware drivers that could interfere -- most software is installed in virtual machines, so the main computer is rather "naked". I connected the phone to the PC in the "Mass storage mode" to get a drive letter, and installed the OVI suite from the SD card. Worked quite well, and finally I re-connected the phone to the Windows PC.
The phone was detected as "NOKIA" in the Windows explorer. I chose "PC Suite" on the phone and started the OVI suite - but nothing. OVI suite told me: "Detected device: NOKIA. Phone is not in PC Suite mode". Eeeh?!?
I tried it several times, but no chance. Although "PC Suite" was active on the phone, the phone was not recognized. Ok, I though, either a problem with the drivers or a hardware problem. So let's see what an older operating system would tell me. I switched on a Windows XP 32 Bit system in my VMWare virtualisation software and connected the phone. The phone connected but did not directly work. I had to use the "mass storage mode" setting to get a drive letter. I installed the OVI suite that was shipped on the SD card (which deleted itself from the SD card later -- baaad habit, I was hopelessly searching for it later on, but ok...). Then I disconnected the phone, reconnected, chose "PC suite mode" and... perfect, stable connection, OVI suite was working totally fine! So I disconnected the phone and closed the VMware machine again.
Ok, so a problem with Windows 7 64 bit. I deinstalled the OVI suite, downloaded the most recent version from the web which obviously was said to support Windows 7 64 bit, installed, reconnected the phone... nothing. Same situation as before.
I deinstalled OVI suite again and downloaded/installed the most recent version of PC suite -- which was said to contain all connectivity drivers including for Windows 7 64 bit. I connected the phone started PC suite and... well, phone detected, but used in "compatibility mode", although the "PC suite mode" was chosen on the phone. But ok, let's see what I can do in the compatibility mode. Full of hope I clicked on the "address book" in PC suite. The phone reacted, it said "PC suite mode activated". Hoping... Hoping... then it said again "PC suite mode activated". Eeh? It is already activated!?! 10 Seconds later: PC tolds me: "Phone could not be switched to PC suite mode. Shhhhh*t!
I googled as hell, and then I saw that I should use the PC suite cleaner before installing. Ok, PC suite deinstalled, PC suite cleaner used, PC suite reinstalled, phone connected... nothing, same behaviour.
Next tip I read: Install the connectivity driver manually. Ok, everything deinstalled (and I mean, everything! All components in the program list that were entitled to be from NOKIA: PC suite, the two drivers and something else I cannot remember). I downloaded the connectivity driver, connected the phone, phone was recognized as "NOKIA" like before. I installed PC suite again and... nothing. Same behaviour. Arrr*h!
The final tip that really helped: I read somewhere in the web that Windows 7 was using the wrong drivers. I took a look in the control panel, looked up the NOKIA phone in the device manager, took a look to the drivers, and indeed. The driver that Windows 7 was using was somehow from 2008!?! So that was an internal driver of Windows 7 and not the newly installed Windows 7 driver which I manually installed!
I clicked on the button "Update drivers" for the "NOKIA" phone and manually chose the connectivity drivers in the "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder. Suddenly the phone was re-recognized: "NOKIA phone USB parent". That was new!
But now, the PC suite on the PC did not recognize the phone at all andmore. Hmmm, a new look to the device manager revealed the reason: A couple of new devices were detected, but all with an exclamation mark. Drivers not found. But with a little bit of luck... I opened every such device in the device manager and told Windows to update the drivers. It asked me for a path where the drivers were saved, and here I just specified the path of the nokia connectivity drivers again (this "C:\Program Files\NOKIA\Connectivity..." or-something-like-that folder). That worked! Now I got one after the other the COM-port driver, OBEX and etc...
At the end I startet PC suite... whahoooo, it works! Phone connected and address book editable! Uff. Nice.
So a deep driver problem.
Then I did a near-mistake: I wanted to update the operating system on my NOKIA phone. I installed the phone update manager in Windows 7, left the PC suite, started the update manager and it immediately recognized the phone. I started it and in told me: "Do not touch the phone or anything", time 15 Minutes. I waited and waited and saw the phone screen disappearing, but ok. I saw the USB drivers being disconnected and trying to be reinstalled, but Windows did not recognize it. But I did not touch anything. Then, the Hiobs-message from the update manager: "Phone disconnected during update. Please swich on and reconnect". Whaaaaa?!?!?
Ok, disconnected the phone, switched off, switched on, reconnected. But Windows 7 did not recognize it correctly anymore. Some unknown devices in the device manager, only the "NOKIA phone USB parent" was still working correctly, and there was now an unknown device which I was not able to activate by specifying drivers manually (it was most likely a USB flash device what I figured out later). And the phone behaved strangely, sometimes crashing when hoovering through the menues... EEEhhh.....
Ok, emergency plan, phone nearly destroyed. I again turned on my VMware and connected the phone to the OVI software in the virtual Windows XP. Still worked fine. I clicked on the update menu item of OVI suite. OVI suite was detecting the phone software, downloaded the new version and started to update. Again it told me: Wait 15 minutes, do not touch anything. And I did. I saw Windows reconfiguring its hardware settings as new hardware was detected, and there were problems in installing a "USB flash device", but the software did not cancel. And finally: Update successful! Uff... I checked the phone (*#0000#), and it was ok. Uuuuh.
Then I switched off the virtual machine, conected the phone again to Windows 7, but there was still a driver problem. Most devices had an exclamation mark. I manually deinstalled all the NOKIA drivers in the device manager and actuivated the "Delete driver from system" checkbox whereever possible -- including the "NOKIA phone USB parent". I removed the phone from the USB cable and plugged it on again. Now windows re-recognized it as "NOKIA" phone, but again used its own internal -- wrong -- driver set. I switched the driver again as described above to the Nokia Connectivity drivers in the program folder, got again the "USB parent" and the unknown devices, manually specified the drivers for the unknown devices by using the path to the Connectivity drivers and finally I got the situation from before the update: Nokia PC suite running fine, I can access my contacts and do anything I like in Windows 7 64 bit.
That was a nightmare and took me about two days intensive research and testing. What a mess...
I hope I could help anyone of you with this when you have trouble installing the PC/OVI suite in Windows 7. And don't try to update the phone in Windows 7, it's dangerous at the moment!
Probably you guys from the driver development can take a more close look to Windows 7 64 bit and its own pre-installed drivers. Does anyone of you have similar experiences?
Best regards,
Mighty Knife

Uhm, I'm experiencing the same problem with some Linux relase. Unfortunately I was unable to solve the problem if not installing a windows emulator. Maybe you're already familiar with it, but it seems the only solution. Through google I found this, I hope I made you a favor.
http://www.macwindows.com/emulator.html
Bye

My ipod touch will not charge or connect via usb

When i plug in my ipod touch, it only recognizes that it is plugged in for a few seconds at a time. Therefore, it will not charge, and this occurs no matter what cable i use with it, whether i plug it into my computer, or into the wall with an adapter. I also cannot use itunes with it because of this. I have already looked through the forums for other people having the same problem, but most of them just got useless answers such as checking the troubleshooting guide. I would prefer a "REAL" answer to this. To be completely honest, all that the troubleshooting guide tells you is how to do an idiot-check on yourself. I have only had the ipod for a few months, two at the most, so a depleted number of recharges in the battery is highly unlikely, especially since the computer also will not recognize it. An error message comes up saying that it does not recognize the device. Thanks for any help!

I have checked for problems with the connections, but from what i can see with the naked eye, nothing appears abnormal. It is very strange, and very sudden. It just stopped in the middle of a charge. The apple store is my next step. I just wanted to see if anyone on here had some extremely eye-opening solution or check. thanks though!
I'm also within warranty, so it's not a huge problem.

Iphone 4s, 6.1.2. is not charging, though synching via usb

Hey pros,
please help.
My 4s is just randomly charging when I connect it to my Macbook Air. Un- and replugging it doesn´t help. Sometimes it doesn´t charge, sometimes it does. I couldn´t find out why.
The strange thing is, that it is recogniced by Itunes and its even synching but NOT charging.
And this is only since I upgraded to 6.1.2 (from 6.1). I had no problems before (so its not the cable!)
I tried restore already, I tried reset wifi settings (I read, that could help), I tried different plug ins.
Pleas help, don´t know what to do!
Thank you so much,
Feivl

there is a KNOWN bug with the iOS 6 firmwares ever since Apple rolled it out where the iPhone will think it's docked therefore preventing any sound unless you plug in headphones/etc/clean out the docking port/etc
the simplest way to see if your iphone thinks it is docked is if you actually.. DOCK IT to your pc aka connect it
once you plug it in/dock it, sound returns as normal..
the problem with 6.1.2 is that this does not even work. no sound returns whatsoever even while docked
i actually managed to "fix" my problem last night by.. blowing into the docking port. Yes, I blew into it almost pretty much blew my lungs out and somehow my iphone is "fixed"
i have no doubts the problem will reappear though so I hope Apple gets around to fixing it
THERE IS A KNOWN WAY TO FIX THE NO-SOUND PROBLEM FOREVER BUT IT INVOLVES JAILBREAKING. There is no way I'm about to jailbreak my iphone so I pray and hope Apple Engineers are not blindly prideful enough to ignore the 100% guaranteed way to fix this no sound problem
there is a file that needs to be deleted and the no-sound problem will never again return

IPod will not sync or charge via USB

Hey all... new member here.
I tried to sync/charge my iPod today, and I plug it in. Nothing happens. It just sits at the home screen, or as it does right now, dead without a battery charge. I have tried resetting, changing to disk mode, switching USB ports, and restarting the PC.
Any idea on how I can fix this problem?
Tim Burke
Chicago, IL

hey tim,
I have the exact same problem with my 5.5 gen iPod and am very frustrated. There are many discussions on this problem and it seems that it is pretty common with the older models of iPod.
Some people say they have fixed it by downgrading their iTunes (if you recently updated to 7.4.__) and deleting the iTunes library file and replacing it with a older library.
It seems that the lastest version of iTunes is causing the problem and I myself haven't been able to fix mine, but try some of these suggestions.
http://discussions.apple.com/thread.jspa?threadID=1142648&tstart=0

Suzuki GP-3 not visible in GB via USB

Similar Messages

Maybe you are looking for