Svc:/system/device/fc-fabric
Why, when I disable this service, does my system boot into System Maintenance mode?
I don't have anything related to Fiber in my PC at all.
svc:/system/device/fc-fabric:default (Solaris FC fabric device configuration.)
State: disabled since Fri Dec 22 18:13:08 2006
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M cfgadm_fp
Impact: 15 dependent services are not running:
svc:/milestone/devices:default
svc:/milestone/single-user:default
svc:/milestone/sysconfig:default
svc:/system/utmp:default
svc:/system/console-login:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
svc:/system/system-log:default
svc:/system/sac:default
svc:/system/filesystem/local:default
svc:/system/dumpadm:default
svc:/system/fmd:default
svc:/system/cron:default
svc:/network/initial:default
svc:/network/service:default
Similar Messages
-
Missing driver for "Base system device" x2 after Windows 7 install on laptop
Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
Both devices report the following code in system information:
PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success. Any help will be greatly appreciated
This question was solved.
View Solution.Here is the link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059 -
Sat Pro 6000: Unknown Base System-device Windows XP Prof. v.2002 SP1
Where can I find a diver for an unknown Base System-device?
Hi
All neccassery Toshiba drivers you can find on the official Toshiba site:
Check this link:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Bye -
Missing driver for "Base System Device"
Hi,
I have a N200 (0769) with WIN7 (32 bit).
In the Device manager I have two "other devices" with missing drivers named "Base System Device".
I could'n find any of that.
I try looking for the Hardwar IDs:
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
But with no success.
Any help where can I find that?
Thanks in advance
Solved!
Go to Solution.hi nadne,
Welcome to Lenovo Community Forums!
Can you try installing this driver
Ricoh Multi Card Reader Driver
7kss73ww.exe
3.25 MB
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Missing drivers after fresh installation of window 7 the base system device missing.
missing driver on HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.
Hi:
The base system device is most likely your card reader.
Missing audio is related to something else.
On the bottom of your PC on the sticker with the serial number, please post your p/n.
That will identify the specific model of your dv4 and I can send you the link to the drivers.
The p/n should be arranged similar to this: AF846AW#ABA
Paul -
Missing Base System Device Driver for Elitebook 8440p
Missing Base System Device Driver for Elitebook 8440p
Hi Doctorsherif,
I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at
http://h30499.www3.hp.com/hpeb/
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Cannot create queue system device
hi all, I try to create a queue system device. Here's my code:
Fchg32(request_buffer, TA_OPERATION, 0, "SET", 0);
Fchg32(request_buffer, TA_CLASS, 0, "T_DEVICE", 0);
Fchg32(request_buffer, TA_STATE, 0, "NEW", 0);
Fchg32(request_buffer, TA_CFGDEVICE, 0, "/IBPS2/training/tuanta/mib_mess/device_file", 0);
Fchg32(request_buffer, TA_LMID, 0, "SITE1", 0);
size = 5;
<b><i>Fchg32(request_buffer, TA_DEVSIZE, 0, (char *)size, 0);</i></b>
tpcall(".TMIB", (char *)request_buffer, 0, (char **)&reply_buffer, &len, TPSIGRSTRT);
The problem is the size, see bold line. Everything is ok when that line isn't included. But if it's included, I receive a error, like this:
LIBTMIB_CAT:50: ERROR: Could not create device entry specified.
In both cases, file device_file is created. What's wrong here? thanks!
nullThe phrase should be "Fchg32(request_buffer, TA_DEVSIZE, 0, (char *)&size,
sizeof(size));"
Wayne
<tuan tran> wrote in message news:[email protected]..
hi all, I try to create a queue system device. Here's my code:
Fchg32(request_buffer, TA_OPERATION, 0, "SET", 0);
Fchg32(request_buffer, TA_CLASS, 0, "T_DEVICE", 0);
Fchg32(request_buffer, TA_STATE, 0, "NEW", 0);
Fchg32(request_buffer, TA_CFGDEVICE, 0,"/IBPS2/training/tuanta/mib_mess/device_file", 0);
Fchg32(request_buffer, TA_LMID, 0, "SITE1", 0);
size = 5;
<b><i>Fchg32(request_buffer, TA_DEVSIZE, 0, (char *)size, 0);</i></b>
tpcall(".TMIB", (char *)request_buffer, 0, (char **)&reply_buffer, &len,TPSIGRSTRT);
>
The problem is the size, see bold line. Everything is ok when that lineisn't included. But if it's included, I receive a error, like this:
LIBTMIB_CAT:50: ERROR: Could not create device entry specified.
In both cases, file device_file is created. What's wrong here? thanks!
null -
Satellite A10: 'base system device' after HDD reinstallation
I have formatted my laptop's hard drive (Toshiba Satellite A10) and downloaded the necessary drivers from Toshiba Europe web site. Everything worked out fine. Then I decided to upgrade my network adapter driver (wrong decision) and it slowed down considerably the system.
Believing that I was holding the solution in my hands I formatted again HDD and when it came to reinstalling the drivers everything loaded ok except one:
BASE SYSTEM DEVICE
Please let me know how to resolve this issue.Did you install the chipset utility?
If not, do that firstly before installing any further Toshiba tools and drivers.
i recommend you to use the Toshiba Recovery CD.
Please check also this useful Intel article:
http://www.intel.com/support/motherboards/server/S5000VSA/sb/CS-022703.htm -
ThinkPad W530 - 2447 3U2 - Base System Device unknown
Hi guys, I tried to install a fresh copy of Windows Enterprise 7 64 bits, in my new laptop. I reinstall all drivers recommended in lenovo support (all) but in device manager window continues with yellow Base System Device message.
These are the list of drivers installed:
6hgx75ww.exe, 79oi30ww.exe, g1a133ww_w78.exe, g1ic09ww.exe, g1im15ww.exe, g1io15ww.exe, g1ir15ww.exe, g1ku20ww.exe, g1ra15ww.exe, g1rf42ww.exe, g1rg14ww.exe, g1rw10ww_64.exe, g1ss01ww.exe, g1w216ww_s64.exe, g1xv51ww.exe, g1ys12ww.exe, g4wb11ww.exe, g5de36ww.exe, geku18ww.exe, gfvv03ww.exe, hfu406ww.exe, os7021ww_64.exe, os7025ww_64.exe, osfj08ww.exe, osfq03ww.exe
The last driver was 8ass82ww.exe and the problem persist.
I need your help. Thanks
Solved!
Go to Solution.Guys, sorry for the little post. Here the complete:
With this driver update:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
I installed and all devices were recognized.
Thanks you very much -
Svc:/system/ca-certificates:default in maintenance
After Upgrade from U1.SRU19 to U2.SRU5 the ca-certificates SMF is in maintenance
-bash-4.1$ svcs -x
svc:/milestone/multi-user-server:default (multi-user plus exports milestone)
State: maintenance since January 10, 2015 01:23:34 PM CET
Reason: Start method died on Killed (9).
See: http://support.oracle.com/msg/SMF-8000-KS
See: init(1M)
See: /var/svc/log/milestone-multi-user-server:default.log
Impact: 4 dependent services are not running. (Use -v for list.)
svc:/system/ca-certificates:default (CA Certificates Service)
State: maintenance since January 10, 2015 12:52:26 PM CET
Reason: Start method failed repeatedly, last exited with status 1.
See: http://support.oracle.com/msg/SMF-8000-KS
See: openssl(5)
See: /var/svc/log/system-ca-certificates:default.log
Impact: This service is not running.
-bash-4.1$ tail -13 /var/svc/log/system-ca-certificates:default.log
[ Jan 10 12:52:25 Executing start method ("/lib/svc/method/svc-ca-certificates start"). ]
Re-generating OpenSSL hash Links
Traceback (most recent call last):
File "/lib/svc/method/svc-ca-certificates", line 108, in <module>
smf_include.smf_main()
File "/usr/lib/python2.6/vendor-packages/smf_include.py", line 95, in smf_main
sys.exit(frame.f_globals[sys.argv[1]]())
File "/lib/svc/method/svc-ca-certificates", line 91, in start
generate_links()
File "/lib/svc/method/svc-ca-certificates", line 43, in generate_links
os.symlink(os.path.join(RELCDIR, cfile), os.path.join(LINKDIR, shash))
OSError: [Errno 17] File exists
[ Jan 10 12:52:25 Method "start" exited with status 1. ]
Any ideas? Which file is the problem?
Thanks,
MarcelThanks for your answer.
/etc/openssl/certs was fine, but /etc/certs/CA contained "illegal files"
# pwd
/etc/certs/CA
# ls *Ops*
192.168.100.59.OpsCenter_cert.pem 192.168.20.59.OpsCenter_cert.pem
# rm 192.168.100.59.OpsCenter_cert.pem
# rm 192.168.20.59.OpsCenter_cert.pem
SMF is online now.
Best regards,
Marcel -
Windows 7 RC - Portege M200 - Base System Device
Windows 7 RC is running nicely on my M200 but the Device Manager is showing an 'Other Device' with no driver loaded. It is described as 'Base System Device' and Properties shows its location as 'PCI Bus 2, Device 13, Function 0'.
I have tried on-line searches and browsing within my M200 for a driver with no success. I have read elsewhere in these forums that the 'Base System Device' could be tied up with the SD Utilities. I have downloaded a fresh copy of the SD Utilities and installed them but still no luck. Certainly the SD Format utility won't work - it does not recognise when an SD card in inserted - so may be the SD Utilities need revision for Windows 7.
Not a major problem as I can format SD cards elsewhere but it would be nice to get a clean bill of health from Device Manager.
Has anyone else run into this problem and, even better, found a solution?
Keith WoolfSome progress! I have checked out the IR device; it has a 'later' driver installed than the one listed on the laptopvideo2go website so I have left it alone. It report 'working OK' although I have no means of checking it.
I found the VENdor and DEVice numbers under Base System Device\Properties\Details\Hardware Ids; they are VEN 1179 and DEV 0805. The 'pcidatabase' decodes these as VENdor Toshiba America Info Systems and DEVice SD Card Controller.
This seems to confirm that, as I guessed from a thread on another forum, it is the SD Card Controller that lacks a driver and that it is 'Toshiba' who - we hope - will come up with an updated driver 'in due course'.
Thanks very much for your help; I have learned how to identify PCI problems and have bookmarked the M200 Impressions site - very interesting and I shall keep an eye on your work.
Thanks again, all. -
What is 'Base System Device'?
After working with my laptop for over two years, i encounter more and more problems but the weirdest thing is that suddenly it tells me that it found a new hardware called base system device, which should be installed.
I have no clue what that is, where to find the software or whether I need to install it at all. Can somebody please give me some advice here?
Thanks.Hi
Firstly could you please post you notebook name?
Secondly: did you install the OS from the Toshiba recovery CD?
This image contains whole drivers and necessary tools and after the installation of the OS from the recovery CD no unknown device should appears in device manager
PS: Base system device is usually the SD Card Controller. -
where can i find the driver of base system device..
the hardware id is
PCI\VEN_1180&DEV_0843&SUBSYS_30DB103C&REV_14Hi:
Below is the link to the card reader driver for your HP Elitebook 6930p.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&sp... -
Missing base system device on HP Pavilian dv7-1285dx - Windows7
Getting the followin errors:
Other devices
Base System Device
Base System Device
Base System Device
Unknown Device
This question was solved.
View Solution.32 or 64 bit?
These are likely the HP Quicklaunch and the Card reader driver.
Here is the full download page for 64 bit:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3860... -
My device does not have base system device.
Hi:
You need this driver...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76430_3&swEnvOid=4053
Maybe you are looking for
-
hi everybody i have an error at MB31 level This particular error occured while doing MTO scenario, system says "GR quantity is greater than Confirmed quantity for the last transaction" though i gave the lesser quantiy also system shows the same error
-
Margin trouble with a Flash object in Dreamweaver.
Hi everyone, I am having trouble with the top and bottom margins of a banner created in Flash and then inserted into Dreamweaver. I thought I had done the proper zero margin adjustments, I usually use IE8 and everything looked fine. However, when vie
-
How to get the current class name in static method?
Hi, I'd like to get the current class name in a static method. This class is intended to be extended. So I would expect that the subclass need not to override this method and at the runtime, the method can get the subclass name. getClass() doesn't wo
-
How to use electronic signature
how to use electronic signature
-
"Pages" and "Sheets" columns in Server Admin Print Service Jobs
I've been using Print Service for a while now and it's been working reasonably well. When I'm monitoring queues in Server Admin, I've noticed there are columns for "Pages" and "Sheets." These columns are always blank for every print job in every prin