Svctag account not created, package check reports errors

# pkgchk SUNWlwact
ERROR: /opt/SUNWlwact/bin/lwact_init
permissions <0744> expected <0644> actual
group name <sys> expected <other> actual
And the account was not created:
# logins -x -l svctag
svctag was not found
the log says the installation was ok:
08) Succeeded
Installed package SUNWlwact(3.0)
Installation of Light Weight Availability Collection Tool (3.0) Succeede
d
--------------

How did you install lwact? Did you run the stb install script, or did you extract the packages and add them manually?

Similar Messages

  • CUSTOMER_REL - Business partner not created; duplicate check on address

    Hello Colleagues
    I have a problem during CUSTOMER_REL replication from ERP to CRM.
    In r3am1 object looks fine but in some BDoc following error appears:
    Assignment person - address exists already
    Message no. AM038
    and the Business Partner for Contact Person is not created.
    We are on:
    SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
    SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
    PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0001     SAPKITLRD1          SAP Solution Tools Plug-In
    SAP_BS_FND701     0005     SAPK-70105INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
    SAP_AP     700     0018     SAPKNA7018     SAP Application Platform
    WEBCUIF     00     0005     SAPK-70005INWEBCUIF     SAP WEBCUIF 700
    BBPCRM     700     0005     SAPKU70005     BBPCRM
    BP-CRM70     700V1     0000               SAP Best Practices for CRM 7.0
    BP-INSTASS     600V7     0000               SAP Best Practices Solution Builder
    ST-A/PI     01L_CRM5700000               Application Servicetools for CRM 500 51
    And have already applied
    1394635
    1396910
    1397895
    1410788
    1438046
    But it is seems problem lies on SAP_ABA as I have found note
    1092089 - Business partner not created; duplicate check on address
    which is valid for different BP role and
    SAP_ABA 700
    SAP_ABA 710 but not for our 701
    Have you ever seen similar issue?
    Thanks in advance
    Michal

    Hi Naresh,
    Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
    I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
    What is more we have implemented in our CRM note 564538  To change Contact Persons grouping replicated from ECC to CRM.
    But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
    We checked as well
    Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
    Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
    Thanks in advance if you have any other idea.
    Cheers,
    Michal

  • Payment not possible because of reported error Message no. FZ311

    i am a fresher in FI module... kidly give the solution  how to solve the error in automatic payment program..f110...
    i have attached my log here....
    Job log overview for job:
    F110-20140315-A1    -X / 13365701
    Date
    Time
    Message text
    Message class
    Message no.
    Message type
    ABAP program
    Screen no.
    15.03.2014
    13:36:59
    Job started
         00
        516
         S
    15.03.2014
    13:36:59
    Step 001 started (program SAPF110S, variant &0000000002023, user ID RAGU)
         00
        550
         S
    15.03.2014
    13:37:00
    Log for proposal run for payment on 15.03.2014, identification A1
         FZ
        402
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    > Additional log for vendor 100263 company code ALRF
         FZ
        691
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    >
    Due date determination additional log
         FZ
        799
         S
    15.03.2014
    13:37:04
    >
    Document 6
    004 line item 001 via INR      200.000,00-
         FZ
        700
         S
    15.03.2014
    13:37:04
    > Terms of payment: 15.03.2014    0  0,000 % 0  0,000 %    0
         FZ
        701
         S
    15.03.2014
    13:37:04
    >  00 days grace period is being considered
         FZ
        726
         S
    15.03.2014
    13:37:04
    >   Payment must take place before 15.03.2014; next payment on 16.03.2014
         FZ
        728
         S
    15.03.2014
    13:37:04
    > Item is due with 0,000 % cash discount
         FZ
        721
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    >
    Payment method selection additional log
         FZ
        699
         S
    15.03.2014
    13:37:04
    >
    Payment me
    thod selection for items due now to the amount of INR      200.000,00-
         FZ
        601
         S
    15.03.2014
    13:37:04
    > Payment method "C" is being checked
         FZ
        603
         S
    15.03.2014
    13:37:04
    > Street or P.O. box entry is missing
         FZ
        617
         S
    15.03.2014
    13:37:04
    > No permitted payment method exists
         FZ
        608
         S
    15.03.2014
    13:37:04
    Information re. vendor 100263 / paying company code ALRF ...
         FZ
        305
         S
    15.03.2014
    13:37:04
    ... payment not possible because of reported error
         FZ
        311
         S
    15.03.2014
    13:37:05
    End of log
         FZ
        398
         S
    15.03.2014
    13:37:06
    Job finished
         00
        517
         S

    Hello Experts,
    I am blocked with a strange issue which is similar to FZ311 mentioned above.
    Enclosing the screenshot for your reference.
    I am bit confused whether anything needs to be configured within the FBZP or it is purely the vendor master data .
    Any help will be appreciated.
    Kind Regards,
    Sanjay

  • Unit KG is not Created in language EN-- Error in MMBE

    Dear Guru,
    When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
    After Executing the report, at header level when i am chaing Unit of Messasurement  ( Ex. to KG) system giving Error message
    <b>Unit KG is not Created in language EN</b>
    But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
    Y i am getting error message after excuting report and changing the UoM.
    Plz guide me.
    Regards,
    Venkat

    Hi,
    As with most SAP messages it is always a good idea to trust what it is saying.
    The system is telling you that KG has not been created in the English language.
    Go to transaction CUNI to check the settings.
    Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
    KG should be there and should have an English description (the message said it was not there for EN)
    If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then  KG?)
    Steve B

  • AnyConnect installation issues - Network Adapter is not created - cannot find any error?

    I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access.  I am about the only person with this installation issue, that I know of.  When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect.  I have turned off Firewall services, I've turned off SQL services, Citrix, etc.  But nothing I have tried allows this to install correctly.
    When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
    The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
    I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
    The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
    Can anyone here point me in the right direction  - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
    Thank you!
    Michael

    Hi Jacob,
    Let's try this & report the outcome...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    The interface that connects to the Internet should be dragged to the top of the list.
    Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
    208.67.222.222
    208.67.220.220

  • AnyConnect installation issue - Network Adapter is not created - cannot find any error?

    I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access.  I am about the only person with this installation issue, that I know of.  When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect.  I have turned off Firewall services, I've turned off SQL services, Citrix, etc.  But nothing I have tried allows this to install correctly.
    When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
    The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
    I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
    The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
    Can anyone here point me in the right direction  - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
    Thank you!
    Michael

    Hi Jacob,
    Let's try this & report the outcome...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
    The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
    10.5.x/10.6.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    The interface that connects to the Internet should be dragged to the top of the list.
    Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
    208.67.222.222
    208.67.220.220

  • Consumption accounts not created as cost elements - Implications

    Hi
    There are following GL accounts as an Expense GL accounts:
    Cost of Raw Material Consumption
    Cost of Finished Goods Manufactured
    Cost of Finished Goods Sold
    Change in Stock WIP.
    I have not created them as cost elements since its asking me cost center when i do any PGI or issue to sub contract stock, etc.
    So i wanted to know the implications on CO-PA if i do not create cost element. I believe that value will flow to CO-PA on the basis of material code.
    Further my doubt is, if i do not create it as cost element, how it will impact my cost center reports and product costing.
    Please help. I am confused very much.
    Edited by: Meenu_ND on Aug 4, 2011 7:55 PM

    Hi Meenu
    cogs - can not be created as cost elements- GBB-VAX- COSTING BASED COPA- MTS
                Can be created as cost element -GBB-VAY- COSTING BASED COPA- MTO
    always as a cost element GBB-VAY- Accounting based copa
    Thanks
    ram

  • R12 AP: Accounting Not Created

    Hi Friends,
    We are running into a very peculiar type of problem in R12 (12.0.4), wherein the Accounting is not getting created. I would like to explain the whole steps of the scenario here.
    When i run the Validate Invoices, the invoice gets validated perfectly. Now, when i run the Online Accounting, i get a message, Accounting Created Successfully for the invoice, but the value for the "Accounted" field always displays as "No".
    Even, when i see the Tools > View Accounting Events, only the events for Validation would be created and no events for accounting are created.
    Background:
    =========
    We have a custom module designed specifically for R12, which works in the following way.
    1. As soon as the custom module is installed, it places a System hold on all types of invoices (whether manual or any other source).
    2. Then when we run our custom concurrent program, the invoices are taken into a custom workflow for the invoice approval process.
    3. The invoices distributions, during the approval process can be changed by the user (i.e he can update the code combination, or split the rows into n number of rows etc..)
    4. Once the invoice is finally approved by the person who has the appropriate approval limit, the hold that was placed on the invoice gets finally released.
    5. Now the invoice is again handed over to Standard AP module for further processing like Validation, Accounting, Payment etc...
    Hence, to summarize, our custom module work starts from Placing a hold on the invoice, Take invoice for approval and Release the Hold.
    Questions:
    1. Is there a need to capture the XLA tables in our custom module coding? I dont think it is needed, becoz, our custom module job is over, before the Validation of the invoice takes place.
    2. May be there are any setups that i need to check for?
    3. May be there is a bug in the instance?
    Your suggestions are really needed and appreciated.
    Awaiting for your help!!!
    Thanks,
    aar

    Hi Nagmohan,
    Thanks for the updates.
    Without the extension, i have not tried the accounting.
    But, the validation event is happening appropriately, without any issues. And as far as i know, the first event to impact XLA tables is Validation and then there would be events related to accounting.
    I would like your help in understanding, the detailed process (technical) that takes place when create accounting is run (If there are any docs related to this), so that it would help us to rectify if there is any issue there.
    Thanks,
    AAR

  • Oper account not created but how can i get sysoper privilege

    Hello Everyone ;
    Hello Everyone ;
    When installing oracle i did not create oper account.
    now  i am checking my personal database;
    SQL> show user;
    USER is "SYS"
    SQL> select * from system_privilege_map where name like '%SYS%';
    PRIVILEGE  NAME      PROPERTY
      -3    ALTERSYSTEM    0
      -4    AUDIT SYSTEM  0
      -83    SYSDBA        0
      -84    SYSOPER 0
    SQL> select count(*) from session_privs;
      COUNT(*)
      166
    >> Connecting as sysoper
    I   can connect  SYS  /as SYSOPER  but  this  session has only 3 privilegs - why ?
    SQL> conn /as sysoper
    Connected.
    SQL> select count(*) from session_privs;
      COUNT(*)
      3
    SQL> select * from system_privilege_map where name like '% SYS%';
    PRIVILEGE NAME PROPERTY
      -3  ALTER SYSTEM  0
      -4  AUDIT SYSTEM  0
    SQL> select * from session_privs;
    PRIVILEGE
    CREATE SESSION
    RESTRICTED SESSION
    SYSOPER
    SQL> show user;
    USER is "PUBLIC"
    SQL> shut immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    Even i did NOT create oper account for sys user then how can i get all sysoper privilege for public user.

    Thanks for quick response;
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2659418700346202574
    sysoper is another role, if you connect as sysoper, you'll be in a schema "public" a
    i am getting confused  from  given link and your answer.
    because  system is displaying  USER is "PUBLIC" .
    when i review  (See $ORACLE_HOME/rdbms/lib/config.c in your installation).
    /*  SS_DBA_GRP defines the UNIX group ID for sqldba adminstrative access.  */
    /*  Refer to the Installation and User's Guide for further information.  */
    #define SS_DBA_GRP "dba"
    #define SS_OPER_GRP "dba"
    char *ss_dba_grp[] = {SS_DBA_GRP, SS_OPER_GRP};
    ~
    I am sorry for comparing both replies.
    please clarify little more.

  • Resource account not created

    Using a custom anonymous regestration process a new user is created, this user is created with a LDAP resource. After the process is approved the user is now in SIM but the account not provisioned to LDAP. In order to get this to provision to LDAP you have to :
    1. Open the user in the admin interface and click Save.. Or
    2. Check the user and Update
    If either of these are done, the LDAP account is created sucessfully.
    We have the same configuration on another machine and the account is created without having to update.

    Hi. I think that your workflow that is on charge of the provision has some definition or property where you define the Workflow context were his process will run.
    I will like to know how to set up a custom anonymous registration process that starts with a login page. I really will appreciate if you can help me with this.
    Best regards.

  • Payment Wizard Run does not create Payment/Check

    Does anyone know possible reason/s, why payment wizard run will not create payments and checks?
    The wizard goes up to Execute Step, after execution, it shows:
              0 Payments Created
              0 Checks Created
    I have compared settings (Banking, BP, Payment methods) with Demo Company (Where wizard runs to create Payments and Checks)
    The client is on SAP B1 2007A
    Thanks in advance for help

    I've found several reasons for the Wizard not creating checks.  I don't know if any of these are relevant to you, but take a look.
    1. The vendors do not have default pay-to addresses.  They may have pay-to addresses, but if there is not one that is designated as the default for each vendor, the wizard will not select any checks for them.
    2. The vendors have a default house bank that is different than the bank you are using for the checks.  It is OK if the house bank for a vendor is blank, but it cannot be different from the bank you are using.
    3. If the vendor reference number on any AP invoice is more than 34 characters long, the wizard will not select any invoices from that vendor for payment (yes, the reference number field is 100 characters, but SAP support confirmed this limitation).  Since you are not getting selections for any vendors, this is probably not the issue in your case - but keep it in mind.
    I hope this is helpful.
    Marcia

  • Could not create mountpoint for SC error in during import configuration

    Hi,
    I have succesfully created a tack in NW7 and during the import of the configuration in developer studio I get the following error on the last step of import
    com.sap.tc.devconf.SyncException: Could not create mountpoint for SC in compartment example.org_APPLICATION_1: Could not create remote path /dtr/ws/APPL/example.org_APPLICATION/dev/inactive/SCs/example.org/APPLICATION/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
         at com.sap.tc.devconf.impl.DTRClientErrorMapper.toSyncException(DTRClientErrorMapper.java:65)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2758)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3046)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5207)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
         at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
         at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
         at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
         at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
         at org.eclipse.jface.window.Window.open(Window.java:563)
         at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
         at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
         at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
         at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
         at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
         at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
         at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
         at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
         at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
         at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
         at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Could not create remote path /dtr/ws/APPL/example.org_APPLICATION/dev/inactive/SCs/example.org/APPLICATION/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:230)
         at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2748)
         ... 47 more
    Caused by: com.tssap.dtr.client.lib.deltavlib.DeltavException: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
         at com.tssap.dtr.client.lib.deltavlib.impl.PersistentResourceFactoryImpl.createCollection(PersistentResourceFactoryImpl.java:233)
         at com.tssap.dtr.client.lib.deltavlib.impl.PersistentResourceFactoryImpl.createCollection(PersistentResourceFactoryImpl.java:79)
         at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:216)
         ... 48 more
    Caused by:
    [VFS version: 7.00 645_VAL_REL 0010 (2006-08-26 16:27:43 CEST)] com.tssap.dtr.client.lib.vfs.config.ConfigurationException: Could not create remote path /dtr/ws/APPL/example.org_APPLICATION/dev/inactive/SCs/example.org/APPLICATION/_comp/TopLevelDCs/ (Internal Server Error [(pre||post)-condition failed: Internal Server Error]).
        at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:230)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2748)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.createMountPointsForSCs(DevelopmentConfiguration.java:3046)
        at com.sap.tc.devconf.impl.DevelopmentConfiguration.goOnline(DevelopmentConfiguration.java:5207)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:773)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:698)
        at com.sap.tc.devconf.DevelopmentConfigurationFactory.addConfiguration(DevelopmentConfigurationFactory.java:669)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.addDevConf(DevConfWizard.java:505)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.access$100(DevConfWizard.java:67)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard$1.run(DevConfWizard.java:348)
        at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
        at com.sap.ide.eclipse.component.wizard.DevConfWizard.performFinish(DevConfWizard.java:346)
        at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:608)
        at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:321)
        at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
        at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
        at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
        at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
        at org.eclipse.jface.window.Window.open(Window.java:563)
        at com.sap.ide.eclipse.component.provider.actions.DevConfNewAction.run(DevConfNewAction.java:46)
        at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
        at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
        at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
        at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
        at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
        at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
        at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
        at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
        at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
        at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
        at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
        at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
        at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
        at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
        at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
        at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
        at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
        at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
        at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
        at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
        at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
        +++ Nested exception part 1/1
        com.tssap.dtr.client.lib.deltavlib.DeltavException: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
            at com.tssap.dtr.client.lib.deltavlib.impl.PersistentResourceFactoryImpl.createCollection(PersistentResourceFactoryImpl.java:233)
            at com.tssap.dtr.client.lib.deltavlib.impl.PersistentResourceFactoryImpl.createCollection(PersistentResourceFactoryImpl.java:79)
            at com.tssap.dtr.client.lib.vfs.config.impl.RepositoryServer.assureRemotePathExists(RepositoryServer.java:216)
            at com.sap.tc.devconf.impl.DevelopmentConfiguration.findOrCreateMountPointForSC(DevelopmentConfiguration.java:2748)
            ... 47 more

    Hi There !
    Run SDM RemoteGui.
    Log in.
    Go to deployment tab.
    Find sap.comtcdtr~dbschema.sda in root directory under SDM.
    Adjust deployment configuration to Update deployed SDAs/SCAs that have any version.
    Complete the wizard.
    this works !
    rajendra

  • Page could not create the iView. Error for KMC iviews

    Hi,
    I am getting this error for all KMC related iviews.
    <i>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.netweaver.coll.colcontent/com.sap.netweaver.coll.RoomCreation/com.sap.netweaver.coll.RoomCreationWizard
    Component Name : null
    Page could not create the iView.
    See the details for the exception ID in the log file</i>
    This is the description in the log file:
    #Error#1#/Applications/comsaptcstylesStyleSheetLinkProvider#Plain###Style sheet link will be provided by WebDynpro since the style sheet link provider coding is not able to provide a style sheet link.#
    Any clues?

    Hi Omri,
    Harini gave the right solution.
    I just want add a small detail:
    The par file is actually a zip file.
    The simplest way to "open" it (as Harini suggested) is to change its extention to ".zip" and open it with winzip.
    Yoav.

  • All line items on a Cost Center Are archived, do not see in custom reports - error No actual line items were selected

    Hello, experts !
    Please advise,
    I have a cost center,
    on witch I know there are bookings,
    1. I do KSB1, have message "No actual line items were selected"
    2. I select - extras - data source - archive
    in this way I can see my items.
    ok.
    maybe all bookings are archived.
    no:
    I de a new movement on this CC - KB11N (exemple) - and on the new one I have the same problem
    I se it only when I check "archive",
    and do not see it on custom reports.
    Why ?
    Ay idea ?

    Dear Jonny,
    Check the T Code: S_ALR_87013611
    Then T Code: KSB1 by removing all the filters like date restriction..etc.
    Still if you are not finding the postings:
    Check the postings in the T code FAGLB03 - Display Balances by giving GL Account.
    Postings happen in co module if there is a cost object.
    If there is no cost object it will not flow to controlling, that will be in FI.
    What you need to do is:
    Select your GL
    Select your Payment date
    Select your Document number.
    You can check the same in FBL3N also.
    go to the transaction summary and verify the cost object whether it is a cost center or Order...etc.
    Also check whether the payment is in parking stage ....?
    Regards,
    Pavan Kumar Arvapally

  • Can not create or check out Enterprise Calendars

    Hi folks,
    MS Project Professional 2013 does not display the enterprise calendar(s)
    that I want to edited/ created after I select the Enterprise Calendar choice from PWA > Server Settings in Project On-line.  This behaviour is isolated to my client's users.
    They are using IE ver.8.
    I on the other hand have no issue.  I am using IE ver.11.
    Note, none of has have any problem checking-out resources in MS Project Professional from the enterprise resource pool, PWA and MS Project Pro seem to be communicating at that level.
    Any ideas?
    \Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

    Check also the account URL in MS Project Pro. It should typically be
    https://servername/PWA without the default.aspx. Finally ensure that the users have the correct permissions for editing calendars.
    Finnaly try to start the IE with administration rights.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

Maybe you are looking for

  • How to Validate Schedule Line in Debugging

    Hi, When saving the Schedule Lines a spool was getting created and from the spool I'm able print the output. But to validate the values I have to get into the debugging mode. But from the spool it is not goint into debugging. As I have to finish it b

  • Am I able to link a photo in a lightbox, to another different lightbox?

    I am working on a furniture website for my work. I have various main pages- Chairs, Barstools, etc.... I am working in the chair page (which has all the chairs under a tabbed accordion panel according to the series name) When clicking on a certain ch

  • How do I delete album images?

    I've discovered I can drag and drop album images to correspond to my music in iTunes. However, I've occasionally "missed" and now some songs are associated with the wrong album art. I can't figure out how to delete those images so I can start over (o

  • Changing Paragraph Style Names

    I asked this question about a month ago, but I did't really ask it right. I am bringing documents from InDesign to InDesign6. In the process, we are changing style names to make things future compabile by eleminating all spaces. periods, dashes, etc.

  • ALV last 10 columns are truncating in background mode

    I am using Reuse_alv_list_display function module and running the report in the background mode, the spool is generating fine but the problem is that the last 10 columns of the report are truncating.what will be the possible solution.