SVG objects moved and reflected when reopened in Illustrator

Hi,
After saving illustrator files in SVG format and then reopening, the objects are reflected (horizontally) and moved off the artboard. The objects are imported PNG screen captures and line drawings (such as a hand or pointing finger).
Also, we select the Embed option for the images; however, when we reopen it, that option is unselected if we just save. We have to select "Save as" to select Embed again.
The image below shows the SVG options we're using.
Thanks in advance for any ideas.

Hi Peter,
Yeah, that's exactly what's been happening to us, and yes, some of the embedded graphics are svgs. We need to embed them for our CMS.
We just tried opening an EPS illustration with numbered callouts, and then saving as SVG. When we reopened, all the callouts save one were missing, and the one that was present was way off the artboard. Then I tried saving with "Preserver Illustrator Editing Capabilities" enabled, and that seemed to solve the problem. I tried it on your graphic too, and it seemed to work.
Thanks for pointing me in right direction! Hope this is it...

Similar Messages

Objects move and skew when a stroke is applied.

Essentially, almost any object that I apply a stroke to is moved and skewed some amount. It seems that when I apply the stroke it is anchored in the top right corner of the object and it is pushed down to the left, and when I decrease the stroke, the opposite happenes to a lesser degree. Some objects are only moved while others are only skewed, and some are affected by both. It only seems to happen when I increase/decrease the stroke incrementally using the arrows.
I would like for this to not happen, as I prefer my strokes to not affect the base object when I apply and remove it.

Looks like a problem with "align to pixel grid". Do a research in this forum on how to solve it.

Windows moving and shrinking when switching users in Mavericks

My wife and son share the same macbook air. When they switch user accounts, often windows are mysteriously moved and made into a smaller size. Seems like some kind of glitch. Is this happening to other people?

Hi there.
I had a similar problem with the Dock. Try my solution mentioned here (use Terminal to 'kill' the Dock).
https://discussions.apple.com/message/26090676#26090676
Killing the Dock might be enough to bring everything else back into line (your background picture looks similar to how mine used to look -- cut off).
Enjoy!

How to keep objects centered and fixed when window resized

Hi,
Newbie here with a question about centering. What I'm trying to do is center the content of a website and keep the content fixed in size, but what is happening is when I move the right side of the window toward the left side of the window (i.e. contract the window to a smaller size), the items that are centered, keep moving. For example, if I have a menu bar, I want the menu bar area to be fixed, and stay centered when a window is resized. I've attached images of what I'm talking about to hopefully make this more understandable.
Below is the link I used for information regarding centering:
https://forums.adobe.com/thread/454036
Thank you for your assistance

May I suggest a bit more modern list style menu like the one way down the bottom of this page:
http://www.peattiecapital.com/2014.php
Here is the HTML code (classes on the a tag are optional)
<ul>
 <li><a class="nl2014" href="2014.php">2014</a></li>
 <li><a class="nl2013" href="2013.php">2013</a></li>
 <li><a class="nl2012" href="2012.php">2012</a></li>
 <li><a class="nl2011" href="2011.php">2011</a></li>
 <li><a class="nl2010" href="2010.php">2010</a></li>
 <li><a class="nl2009" href="2009.php">2009</a></li>
 </ul>
The CSS is here:
http://www.peattiecapital.com/archive.css

Mysterious lines and gradient when printing from Illustrator or pdf on PC and MAC

First of all I have to admit I'm not a big computer brainiac but this issue keeps on reoccurring no matter what computer I use. When creating files/layouts in Illustrator and either saving them to pdf and then printing or printing directly from Illustrator either from a PC or from Mac (I use both) the print outs come out with mysterious lines and gradient not matter what colour is used. The lines occur on solid colour prints, when gradient or transparency are not used and when they are used as well. Any ideas suggestions how to make them go away?

Monica,
Here's an image of a print out that was meant to be a solid black colour. This happens with other colours as well not just with black.

Changes are not reflected when objects transported from Quality to Productn

Hi
In case of moving some Transport requests from Quality to Production, some times the changes made to the selection screen of a report program doesn't reflect in Production. Also we don't see any Transport error while transporting. Moreover, we can see the changes by regenerating the Program in production.
Would any one help me out in this with the reason for this.
Pls suggest what needs to be done.
Satish.

HI,
Thanks for the reply.
- I have checked the respective transport too, and every thing seems to be fine.
- Recently we went to go live, for the next release, so earlier before go live, we didnt faced any proble.. Only now we are facing this problem, that we find the changes relating to selection screen are not reflected when the object / prog is moved from qty to Prd.
- Only problem is with the selection screen.(not getting reflected in PRD. In Qty we are able to see those changes.
- Then in order to reflect these changes in PRD, we have to re generate the object, then only it get s updated..
Satish.
Edited by: satish c on Sep 22, 2009 3:35 PM

After updateing Firefox all my tabs open object moved so I have to diable plugins and run in safe mode which is a real hassel. What can I do to fix this?

I don't know what else to say other than I have had Firefox for a while and an update came up and so I updated and Firefox has not worked right since then. I open a tab and it comes back Object Move (here) or Object moved temporary or some such crap. I then have to to the Firefox control go to help and and restart with add -on's Disabled I have tried ever other setting listed and nothing changes this problem from happening.

Hmmm, Norton extensions are broken again in Firefox 4.0.1. It seems that Norton didn't allow for Firefox 4.0 security updates when they updated their Firefox extension for Firefox 4.0. Norton says they'll have a fix in two weeks. A Norton user posted a fix in this forum thread.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

Moving selected objects up and down with keyboard is automaticly applying a colour fill.

Hi,
My InDesign is strangely applying a colour fill when i move an objects up or down using the directional arrow in my keyboard. If the colour pallet is open. Nudging an object up makes the pallet disappear on the first press. It then reappears on the second press while filling the object (text frame) with black. This is instensly frustrating. How can I stop this? Suggestions would be very appreciated.
I have already reset the preferences.
Cheers,

Thanks for your reply.
I fixed the problem by replacing the keyboard!
Cheers,
Nick Meadows
0421 976 704
www.nickmeadows.com
Date: Fri, 30 Mar 2012 06:01:22 -0600
From: [email protected]
To: [email protected]
Subject: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    Re: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    created by Peter Spier in InDesign - View the full discussion
I have to ask if you reset the prefs uing one of the methods in this thread: Replace Your Preferences If not, there's a good chance you left out one of the files, so please try again using one of the listed methods. And please tell us the OS and your version of ID, including the patch level. Obviously this is not normal behavior. It sounds as if the Swatches panel has focus when you are pressing the arrow keys.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4302200#4302200
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4302200#4302200. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cropping when moving and resizing a cropping rectangle

I created a program that crops an image and displays the cropped image but I'm trying to add more functionality
by making it movable and resizable. The rectangle moves and resizes but it only crops an image when user draws the rectangle and not when moved or resized. I know that the X,Y, height and width position of the rectangle would need to be updated but I'm not
sure how I can accomplish this being new to WPF. Below is my user control "CropControl and the code behind. Also, I'm implementing my code using MVVM framework.
XAML:
<UserControl x:Class="Klein_Tools_Profile_Pic_Generator.CropControl"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:s="clr-namespace:Klein_Tools_Profile_Pic_Generator"
mc:Ignorable="d"
d:DesignHeight="300" d:DesignWidth="300">
<UserControl.Resources>
<ControlTemplate x:Key="MoveThumbTemplate" TargetType="{x:Type s:MoveThumb}">
<Rectangle Fill="Transparent"/>
</ControlTemplate>

<ControlTemplate x:Key="ResizeDecoratorTemplate" TargetType="{x:Type Control}">
<Grid>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeNS" Margin="0 -4 0 0"
VerticalAlignment="Top"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeWE" Margin="-4 0 0 0"
VerticalAlignment="Stretch" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeWE" Margin="0 0 -4 0"
VerticalAlignment="Stretch" HorizontalAlignment="Right"/>
<s:ResizeThumb Width="3" Height="7" Cursor="SizeNS" Margin="0 0 0 -4"
VerticalAlignment="Bottom" HorizontalAlignment="Stretch"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNWSE"
VerticalAlignment="Top" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNESW"
VerticalAlignment="Top" HorizontalAlignment="Right"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNESW"
VerticalAlignment="Bottom" HorizontalAlignment="Left"/>
<s:ResizeThumb Width="7" Height="7" Cursor="SizeNWSE"
VerticalAlignment="Bottom" HorizontalAlignment="Right"/>
</Grid>
</ControlTemplate>

<ControlTemplate x:Key="DesignerItemTemplate" TargetType="ContentControl">
<Grid DataContext="{Binding RelativeSource={RelativeSource TemplatedParent}}">
<s:MoveThumb Template="{StaticResource MoveThumbTemplate}" Cursor="SizeAll"/>
<Control Template="{StaticResource ResizeDecoratorTemplate}"/>
<ContentPresenter Content="{TemplateBinding ContentControl.Content}"/>
</Grid>
</ControlTemplate>
</UserControl.Resources>
<Canvas x:Name="BackPanel"
MouseLeftButtonDown="LoadedImage_MouseLeftButtonDown"
MouseMove="LoadedImage_MouseMove"
MouseLeftButtonUp="LoadedImage_MouseLeftButtonUp"
Background="Transparent">
<ContentControl x:Name="contControl" Visibility="Collapsed"
Template="{StaticResource DesignerItemTemplate}">
<Rectangle x:Name="selectionRectangle" Fill="#220000FF"
IsHitTestVisible="False"/>
</ContentControl>
</Canvas>
</UserControl>
CODE BEHIND:
namespace Klein_Tools_Profile_Pic_Generator
/// <summary>
/// Interaction logic for CropControl.xaml
/// </summary>
public partial class CropControl : UserControl
private bool isDragging = false;
private Point anchorPoint = new Point();
private bool moveRect;
TranslateTransform trans = null;
Point originalMousePosition;
public CropControl()
InitializeComponent();
//Register the Dependency Property
public static readonly DependencyProperty SelectionProperty =
DependencyProperty.Register("Selection", typeof(Rect), typeof(CropControl), new PropertyMetadata(default(Rect)));
public Rect Selection
get { return (Rect)GetValue(SelectionProperty); }
set { SetValue(SelectionProperty, value); }
// this is used, to react on changes from ViewModel. If you assign a
// new Rect in your ViewModel you will have to redraw your Rect here
private static void OnSelectionChanged(System.Windows.DependencyObject d, System.Windows.DependencyPropertyChangedEventArgs e)
Rect newRect = (Rect)e.NewValue;
Rectangle selectionRectangle = d as Rectangle;
if (selectionRectangle != null)
return;
selectionRectangle.SetValue(Canvas.LeftProperty, newRect.X);
selectionRectangle.SetValue(Canvas.TopProperty, newRect.Y);
selectionRectangle.Width = newRect.Width;
selectionRectangle.Height = newRect.Height;
private void LoadedImage_MouseLeftButtonDown(object sender, MouseButtonEventArgs e)
if (isDragging == false)
anchorPoint.X = e.GetPosition(BackPanel).X;
anchorPoint.Y = e.GetPosition(BackPanel).Y;
Canvas.SetZIndex(selectionRectangle, 999);
isDragging = true;
BackPanel.Cursor = Cursors.Cross;
private void LoadedImage_MouseMove(object sender, MouseEventArgs e)
if (isDragging)
double x = e.GetPosition(BackPanel).X;
double y = e.GetPosition(BackPanel).Y;
contControl.SetValue(Canvas.LeftProperty, Math.Min(x, anchorPoint.X));
contControl.SetValue(Canvas.TopProperty, Math.Min(y, anchorPoint.Y));
contControl.Width = Math.Abs(x - anchorPoint.X);
contControl.Height = Math.Abs(y - anchorPoint.Y);
if (contControl.Visibility != Visibility.Visible)
contControl.Visibility = Visibility.Visible;
private void Image_MouseMove(object sender, MouseEventArgs e)
if (moveRect)
trans = selectionRectangle.RenderTransform as TranslateTransform;
if (trans == null)
selectionRectangle.RenderTransformOrigin = new Point(0, 0);
trans = new TranslateTransform();
selectionRectangle.RenderTransform = trans;
trans.Y = -(originalMousePosition.Y - e.GetPosition(BackPanel).Y);
trans.X = -(originalMousePosition.X - e.GetPosition(BackPanel).X);
e.Handled = false;
private void LoadedImage_MouseLeftButtonUp(object sender, MouseButtonEventArgs e)
if (isDragging)
isDragging = false;
if (contControl.Width > 0)
//Crop.IsEnabled = true;
//Cut.IsEnabled = true;
BackPanel.Cursor = Cursors.Arrow;
contControl.GetValue(Canvas.LeftProperty);
// Set the Selection to the new rect, when the mouse button has been released
Selection = new Rect(
(double)contControl.GetValue(Canvas.LeftProperty),
(double)contControl.GetValue(Canvas.TopProperty),
contControl.Width,
contControl.Height);

Hello HotSawz,
The ResizeThumb and MoveThumb is not in your code so I cannot compile. Anyway, it is not the problem.
Anyway, can you clarify more details about "it only crops an image when user draws the rectangle and not when moved or resized", it is already normal behavoir for you to draw a rectangle and then move it. What kind of action do you want? Do you
mean some controls like this:
http://www.codeproject.com/Articles/23158/A-Photoshop-like-Cropping-Adorner-for-WPF
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My safari is not working. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen stay

. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen and stays like that.

If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

When I try to open any kind of links, the page first shows me "the document has moved" and then goes on to some advertisement page.

When I follow any kind of links or try to open something in another window or new tab, the browser first shows the white page with text "the document has moved", and then moves to advertisement page of some sort. Usually in the small box where the page description is it says "Jump". I don't know how to disable it, it is really irritating.

Sounds like Malware.
Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx]
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

Error when determining a number from object BI_TSDTEL and number 01

Hi BW Experts,
After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
"Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
Transfer structure 0IM_FA_IQ_2_SA does not exist
Error RSAR 440 when handling objects with type R3TR ISTS."
I have gone through the Note: 674818.
Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
Because I have not seen the Intervals in R/3 ( Dev & QA) systems.
please could someone provide Inputs for this.
Thanks in Advance
Regards
SK

Hi,
Try to see that transfer structure is existing in the sytem which is connecting in
the BW quality.
You need the same to be transported from the development server of R/3 to quality server of R/3.
Just check if this helps.
Regards
Rahul Bindroo

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

Why is my text rasterized and blurry when it loads in an object state?

My fonts are coming out blurry when I use them in an object state and the state is displayed, but nice and clear when placed on the main page outside of an object state. I'm using viewer 25 for my folio version and viewing it in adobe content viewer on the ipad. It is not yet published. Thank you.

You need to keep in mind that DPS is still very much a cobbled onto InDesign solution. MSOs were intended for SWF output and any changes beyond that happen in the folio overlays panel.
BTW, your replies via email show up on the web. No need to reply more than once.
Bob

SVG objects moved and reflected when reopened in Illustrator

Similar Messages

Maybe you are looking for