SVG problem in FF 2.0

Some SVG charts are not correctly displayed in FF20.
Wrong outputs in FF are like:
"PIE:Chart 1Chart 1druga : 12%prva : 14%treća : 25%četvrta : 49% -"
or
"PIE:Popup Javni : 28.6%Apex Errors : 8.4%Pregled izdavatelja : 4.4%Kontakt : 3.9%e : 3.8%O agenciji : 3.5%Statistika depozitorija : 3.1%Pregled obavijesti : 2.8%Pregled sudionika : 2.8%Statistika WEB-a : 2.4%Pregled ISIN oznaka : 2.3%Stanje na računu : 2.3%Napredno pretraživanje članova-sudionika : 2.2%Izdavatelji-članovi sudionici : 2.2%Zahtjevi za registracijom : 1.7%Other : 25.5% -"
In IE7 they all are OK...
Unfortunatelly there are some pages where SVG is displayed OK.
Any hint how to enable that SVG view on such a pages? Could that have something with column position, region type or...anything else ?
P.S.
In Enterprise Manager images are also missing...but still could not find the solution...
P.S. II
Already tried to unistal SVG and to reisntall again but no success
THX!
Message was edited by:
Funky

ur file basic_darithmetic.jsp has got some error ....
check that out
first write a simple jsp in jsp2.0 dir and try executing it
if tht runs then u can confirm tht the error is with the jsp u've in tht dir.

Similar Messages

  • Export HTML SVG problem

    Hi Muse,
    A little SVG problem after to export HTML site:
    Online Host: doesn't show all SVG files!
    Offline: show all graphic elements
    From what this may be?
    Thanks for help!

    Was this fixed? I have the exact same problem.
    Like in this example where I'm using the muse demo files http://users.telenet.be/pixelbot

  • SVG problem?

    Using Ilustrator CS5 svg files animated in Hype 1.5.2 (previews perfectly in browsers) placed in Dreamweaver CS5 HTML page (again previews perfectly in browsers) and uploaded do not show at all online. What is the problem?

    Are all dependant files being uploaded?
    If so, do you have a link we could see?

  • SVG problems

    Recently I've encountered a few problems while working with Edge Animate.
    Firstly, I was importing SVG Files into Edge that I'd created in Illustrator. This was going fine until Edge stopped responding to my request of adding more SVG files. No error message as such appeared, however the SVG files simply wouldn't upload. I had only imported 8 SVG files as well. In the end I had to open up a blank document in Edge and import the SVG files into there and then copy and paste them into the original file, and that was fine.
    Another problem I had while working with these SVG files in Edge was that when I enlarged the file during the animation, it would pixcelate after slightly expanding. But the whole reason I converted these files into SVG was so they wouldn't blur or pixcelate after being enlarged. 
    Any help will be much appreciated!

    I filed [https://bugzilla.mozilla.org/show_bug.cgi?id=754644 Bug 754644 - Genome Maps is slow].

  • Illustrator CS5 - Save as SVG - Problems embedding fonts

    This is what is happening:
    1. I create a new illustrator document.
    2. I create a text-box in it, and write something. Like "test".
    3. I use the default font face (Myriad Pro) (Any other font will give the same result)
    4. I save as Svg.
    5. In "Fonts" I choose "SVG" and "All Glyphs" (Only Glyphs used gives same result) (SVG profile: SVG 1.1)
    6. Illustrator alerts "One or more of the fonts could not be embedded. Please check the output document and directory."
    7. It saves as SVG, but without embedding the fonts.
    And it does not embed the font. I've tried with different fonts, with same result. I've tried with several text boxes, with different fonts, with same result: No fonts are embedded.
    Any ideas about what might be going on here?

    My PDF files are showing the fonts being live no matter what Adobe preset setting I used. The only way to get the fonts embedded is to outline them first in illustrator. I attached a screen capture to prove that they are still live in the PDF file. This means if the recipient don't have these fonts, they will default to something else.

  • Line chart with more than 15 data series - color problem

    Hi all,
    I've built a line chart with 32 data series (user can control, which of them are displayed at a time). For series 16 to 32 I did manipulate the URL in the browser directly, because Application Express does only display parametrs for up to 15 series. This works fine so far except of displaying the colors. For each sieries I defined a different color. 29 of my 32 series are displayed in the desired color. But series 29, 31 and 32 are displayed in a default-color (#0099CC). It seems that this is a SVG-problem. In the SVG-source I find the wrong color. When I export my application, I see the right color.
    Thanks for help,
    Chris

    Hello,
    Which version of APEX are you using?
    Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
    Regards,
    Dimitri
    -- http://dgielis.blogspot.com/
    -- http://apex-evangelists.com/
    -- http://apexblogs.info/

  • Problem using SVG text in FLASH --ViceVersa

    hi all,
    I had been developing an application to read SVG files in to
    flash.....i am successful in reading shapes,,with the path's....but
    the biggest problem is with the "SVG text".......the positions of
    text with respect to FLASH and SVG differs completely.....
    As far as i know the origin differs from flash to
    SVG.....Flash has it's left top as origin ....SVG has lower left as
    origin....
    when i scale or rotate the flash text ....if i need to
    convert those in to SVG text..the problem arises....because the
    SCALING and ROTATION acts very differently in SVG...when compared
    to FLASH
    iam struck here....pls anyone help me to find a
    solution......
    THANKS in ADAVNCE !!!!!!

    Thanks for answering
    So you have IE8 and the hardware acceleration was able to be UNchecked and FP(Flash Player) is working properly with IE.
    In IE flash works fine with any settings.
    When I unchecked "Hardware acceleration" checbox in IE it also became unchecked in opera, but nothing changed in opera's behavior.
    When you don't use the Aero it's displayed correctly but the settings do not work. What settings are you referring to?
    It's about flash settings in Opera
    With aero: http://img443.imageshack.us/i/settingsh.png/
    Without aero: http://img816.imageshack.us/i/settingswoaero.png/
    In both cases the settings dialog is displayed like in the screenshots above, but when I click on checkbox/tabs/'close' button in it nothing happens. I can't change any settings or close it (dialog disappers only after reloading page)
    Just to sum up everything mentioned above:
    - In IE flash works fine regardless of any settings
    - In Opera text is displayed wrong when using windows aero, and without aero theme it's displayed correct
    - I didn't manage to make settings dialog work in Opera
    - When I change some flash settings in IE, they are also changed in Opera
    Now Flash Player works thru the browser, do you have perhaps have an addon that is conflicting? What Anti-Virus do you have Installed? Any addons of that?
    I have 7 extensions installed in Opera, I've disabled all of them, but nothing changed.
    I use Kaspersky Internet Security 2011, disabling it also gives nothing.

  • Loading EMF and Conversion Problem from EMF to SVG in Adobe illustrator CC

    Hello,
    I have downloaded trial version of adobe illustrator CC.
    I am importing .emf file into adobe illustrator CC. it loads an emf file properly with its content but my emf file contains some lines(--------) also..imported emf file doesn't show any line.
    My main motive is convert this emf file into svg file. but as because my emf file is not imported properly, so as with SVG.
    Ask one more important thing, why converted svg file from emf appears to be having different fonts and margins.
    Kindly help

    The problem is once I finished with the art, I deleted the template, and there's a big art board there and it's in the way, I don't want it to affect the size and dimensions of the channel art. I just need it to be 2560px by 1440px wide, is there any way I can save it exactly like that?
    Not sure what you mean by "it's in the way."
    The size of the artboard doesn't necessarily affect the "size of the art." (There are some workflow scenarios where the artboard size is recognized and utilized, but for the most part it is simply a 'passive' boundary.)
    If your art is 2560px X 1440px, and you want the artboard to match, double-click the artboard tool and choose "Fit to Artwork Bounds" at the top of the preset menu.

  • Svg line chart  problem with latest patch?

    Hi team,
    I was checking out one page containing an SVG chart that I didn't modify in 2 weeks, according to the application builder, but it seems to hang after displaying the first line series of 4 total.
    It was working before the last patch was installed.
    It's page 65 of application 21670 in the online environment.
    Choose "automobile" from the first drop down list and click on the button, the chart appears but then it seems to be waiting for something to download.
    If you move the mouse over any textual part, you can see in the status line the following message:
    "xml processing instuction not at start of external entity: line 172, column 0".
    If you open up the SVG source by right clicking on the chart, you will see at the end of the file an error text message returned by oracle (ORA-06502), but what is particularly strange is the presence of an <?xml> processing instruction just in the middle of the source code listing.
    It looks like it is trying to append the second chart series by appending another svg source file.
    Could you check if I did anything wrong or if it is a problem of the patch?
    I have got other chart type running without problems.
    Thanks!
    Bye,
    Flavio

    Things are getting complicated.
    I found some cases where the chart is displayed correctly, which made me think of some unexpected values returned by the underlying queries.
    Since my chart is made up of 4 different series returning 12 points each, I assembled the queries with UNION ALL and checked out what was returned both in a failing case and a successful one but I can't figure out a valid explanation, the only thing I notice is that in the failing case there are some values higher than average, say 10 times bigger than the average value and for some reason the chart stops drawing points exactly after the peak value (1155.62, see below).
    Each series returns exactly 12 points, some nulls, but that's doesn't seem to be the problem.
    I wonder if the problem is with the "autoscale" algorithm, but I am lost at the moment...
    Here is a successful data sample:
    - APRIL -
    - APRIL 119.57125
    - APRIL -
    - APRIL -
    - AUGUST 160.5
    - AUGUST 157.53
    - AUGUST 157.53
    - AUGUST 119.57125
    - DECEMBER -
    - DECEMBER 119.57125
    - DECEMBER 113.67
    - DECEMBER 131.214
    - FEBRUARY 104
    - FEBRUARY 119.57125
    - FEBRUARY 126.418333333333333333333333333333333333
    - FEBRUARY 125
    - JANUARY 153
    - JANUARY 119.57125
    - JANUARY 134.845
    - JANUARY 145
    - JULY 154.56
    - JULY 119.57125
    - JULY 154.56
    - JULY 154.56
    - JUNE -
    - JUNE -
    - JUNE -
    - JUNE 119.57125
    - MARCH 43.5
    - MARCH 119.57125
    - MARCH 106.918333333333333333333333333333333333
    - MARCH 100.166666666666666666666666666666666667
    - MAY -
    - MAY 119.57125
    - MAY -
    - MAY -
    - NOVEMBER 118
    - NOVEMBER 131.214
    - NOVEMBER 125.3775
    - NOVEMBER 119.57125
    - OCTOBER 164
    - OCTOBER 119.57125
    - OCTOBER 134.5175
    - OCTOBER 134.5175
    - SEPTEMBER 59.01
    - SEPTEMBER 119.57125
    - SEPTEMBER 124.69
    - SEPTEMBER 124.69
    and now an offending one:
    - APRIL -
    - APRIL 287.743333333333333333333333333333333333
    - APRIL -
    - APRIL -
    - AUGUST 1155.62
    - AUGUST 655.09
    - AUGUST 655.09
    - AUGUST 287.743333333333333333333333333333333333
    - DECEMBER 135
    - DECEMBER 287.743333333333333333333333333333333333
    - DECEMBER 197.2525
    - DECEMBER 349.865
    - FEBRUARY 114
    - FEBRUARY 287.743333333333333333333333333333333333
    - FEBRUARY 315.947142857142857142857142857142857143
    - FEBRUARY 130
    - JANUARY 153
    - JANUARY 287.743333333333333333333333333333333333
    - JANUARY 321.741428571428571428571428571428571429
    - JANUARY 190
    - JULY 154.56
    - JULY 287.743333333333333333333333333333333333
    - JULY 154.56
    - JULY 154.56
    - JUNE -
    - JUNE -
    - JUNE -
    - JUNE 287.743333333333333333333333333333333333
    - MARCH 223.5
    - MARCH 287.743333333333333333333333333333333333
    - MARCH 182.787142857142857142857142857142857143
    - MARCH 156.375
    - MAY -
    - MAY 287.743333333333333333333333333333333333
    - MAY -
    - MAY -
    - NOVEMBER 118
    - NOVEMBER 392.838
    - NOVEMBER 452.4075
    - NOVEMBER 287.743333333333333333333333333333333333
    - OCTOBER 354
    - OCTOBER 287.743333333333333333333333333333333333
    - OCTOBER 461.5475
    - OCTOBER 461.5475
    - SEPTEMBER 182.01
    - SEPTEMBER 287.743333333333333333333333333333333333
    - SEPTEMBER 497.396666666666666666666666666666666667
    - SEPTEMBER 497.396666666666666666666666666666666667
    Weird, isn'it?
    Bye,
    Flavio

  • Problems playing SVG animations

    Dear Apple
    It was extremely nice news that you have added the SVG support to Safari 3.0. We would be more than happy to add Apple iPod and iPhone users to our community the fans of “The Spoon” animations. However, when testing my SVG animations with your Safari 3.0.1 for windows, I found following problems:
    1. As our file names are case sensitive, they do not load because Safari converts them lowercase;
    2. Loading the file from Internet will give me error “error on line 1 at column 1: Document is empty”;
    3. When loading them as file from my computer, the animation does not start to play. Every object in appearing in the screen same time and wrong size. Do you support SVG AnimateMotion tag?
    Sincerely,
    Veiko Herne
    Southwave Productions Ltd.
    http://www.southwave.co.uk
    DELL   Windows XP  

    Why did you put a button in the first place? What is its action?
    I am using Captivate for life presentations as well, and then I have sometimes staggered objects (text or others) that I want to appear when I'm clicking on a click box or a button. The action for that click box is then to Continue. Maybe you didn't create this file yourself and it was meant for presenting in that way? Check the action that is mentioned in the Actions accordion if you select that button or click box.
    When that first shape button (highlighted in yellow) is clicked playhead is released, because action is Continue, and the Image that is second from bottom up in the stack gets visible.
    If you don't use your button for anything, just select it and delete. If it has a goal, an action, tell me which one.

  • Problem faced in viewing SVG elements in IE 7 in windows 2003 server machine

    Hi All,
    We are using SVG to use graphics elements in web page for our product. The web page contains HTML+SVG elements.
    If we use an HTML Image element in our web page display and if we draw or configure SVG elements like rectangle or circle over the image element, then on viewing it in browser, the html image element overlaps the SVG elements and they get hidden behind the image.
    Please help us in resolving this issue.
    This scenarios works fine if we use browser IE7 in windows XP machine.
    But on using IE7 in windows 2003 server machine, the problem is faced.
    We have tried all possible and valid IE settings and properties to make the display work. But its helpless. The SVG plugin is also installed properly on systems. But still the display is not as intended.
    I have attached the working scenario screenshot and non working scenario screenshot
    The screenshot here contains an html image which is showing text as Incom tax department and on top of it is SVG element rectangle. This is viewed in Windows XP in IE 7 browser
    This screenshot contains the same page above but when viewed in Windows 2003 IE 7 browser. The SVG rectangle is overlapped by the html image element here
    Kindly please help us in this regard as we are unable to proceed further with this issue. If anyone of you have face this before, then please help us on the resolution. We will be very grateful
    Thanks a lot.
    Regards,
    Shwetha

    If you are using Dreamweaver to create your webpage, please post in the Dreamweaver forum. If you are hand-coding you might try posting in the Web Design forum. This forum is for help using the forums not for general tech support.

  • .svg italics problem

    Hello
    I'm having a problem with italics font in .svg files.
    Illustrator shows the font correctly (times new roman) but if I open it in a browser (firefox) there are no italics.
    Where did I go wrong?
    I made some svg files last year, and didn't have that problem but can't seem to find what did I miss...
    The svgs are going online, so correct browser viewing is essential!
    Thanks for your help in advance.

    Hello,
    The problem is that a & creates malformed XML. Try adding something like
    select replace('&','& amp ;') from dual
    [ & amp ; remove spaces in the example the forum is auto escaping ]
    to your query to replace the ampersand with the proper XML representation.
    Sorry you'll have to change your query a bit but it will work fine after that.
    The Javascripts are for asynchronously updating charts in a page without reloading the page and will not cause the failure your seeing.
    Carl

  • SVG Graph problem

    I have an SVG graph with 2 series and I have 2 check boxes (let me call them Series1 and Series2 for this example) that control the display of this series. When I check Series1 , only the first series is to be displayed and on checking on series2 , the 2nd is to be displayed, if both are chcecked, both the series are displayed on the same SVG chart.
    This actually works well but the problem is that if series 2 is checked without checking series 1 only a shadow of the series 2 is displayed, I guess the SVG chart attributes determining the X,Y coordinates and labels are not being invoked. However , if series 1 is checked it is displyed correctly, a proper chart with only Series 1, and if both are checked, it displays it correctly too. But if only Series2 is checked I get a shadow of the series against a white background, though the shape of the series output is right. The graph background, the legend, the X,Y corordinates etc are missing.It looks like the chart attributes are determined from the first series and so if that is not invoked, only a shadow if the other series are displyed. Can anyone help with this?
    Thanks

    i see what you mean re the second series depending on the first. i've logged it as a bug, too, thanks. consider working around the issue for now by setting up multiple svg regions on your page that fire conditionally based on the series to be shown. so for your example case you could have three regions - one for series1, one for series2, and one for both. you could then show the appropriate region based on whether series1, series2, or both series are to be displayed.
    hope this helps,
    raj

  • SVG pipe chart problem!

    Hi guys I will need to develop an application in htmldb 2.0. In this version of apex I can use only svg charts. And I have a problem with pipe chart , when I have this values
    label     value
    B     100
    C     0
    In this situation on the page appear sth that dosent look like a pip chart, any ideas?
    Slavi

    Hi guys I will need to develop an application in htmldb 2.0. In this version of apex I can use only svg charts. And I have a problem with pipe chart , when I have this values
    label     value
    B     100
    C     0
    In this situation on the page appear sth that dosent look like a pip chart, any ideas?
    Slavi

  • Problems converting PNG image to SVG with autotrace

    Hi,
    I am trying to convert a large number of color PNG images of hieroglyphs (produced after much effort) to SVG format, using "autotrace -background-color ffffff -output-format svg".
    It seems that where there are closed paths with background color inside, autotrace produces an SVG image with the background area in black instead of transparency. (You can see the images at http://5b4az.chronos.org.uk/pkg/hieroglyph/A001.png and http://5b4az.chronos.org.uk/pkg/hieroglyph/A001.svg although the svg image is not rendered by Firefox). You may also download the tarballs with all the hieroglyphs of the Gardiner set if you are interested.
    After all the effort that went into these images, I am stuck with being unable to convert raster images to vector graphics. I did try autotrace before I put in all this effort, but I didn't notice the problem because apparently I tried it on images with no enclosed background color.....
    Any suggestions wellcome greatefully!
    Last edited by neok (2009-10-17 16:59:31)

    I know this is an old thread, but I did some new testing on some line art and want to post my results.
    I started with a PNG, and converted it to PBM and PGM. I got much better quality doing this conversion with GIMP, as opposed to pngtopnm.
    I traced both formats with autotrace and potrace, which I output to SVG.
    Autotrace accepts PNG, so I did the trace with the original as well.
    I got the highest quality with PGM and potrace.  It also was the smallest file size.
    a close second was PBM with potrace, slightly larger.
    third was autotrace and the PBM, larger still.
    Using the PGM with autotrace was unacceptable, and the file size was HUGE!
    So if black/white is OK: Convert PNG to PGM with GIMP, then potrace
    both the best quality, and smallest size SVG.  This is assuming you started with anti-aliased black/white line-art, i guess the full greyscale PGM avoids the aliasing of PBM.
    It seems autotrace is the way to go, if your forced to deal with multiple colors. 
    I suspect you will need to do many passes and really tweak those command options,
    The PNG directly to autotrace was a complete disaster, but i suspect it would improve given enough time to configure command arguments.
    However, even with those perfect options I would believe potrace yields a cleaner trace.

Maybe you are looking for