SVG Series chart problems and wish list

Hi,
I've noticed that when I add more than 3 series, the fourth item in the legend is displayed below it, amidst the data, in other words the legend is not resized or the exceeding elements are not accomodated in the spare space available inside the legend's box.
Also, I cannot use dynamic values for series names. This would be very useful when creating charts out of TOP-N queries. The only way around this is to split a chart into N charts, where, at least, I can dynamically assign the chart title.
Likewise, I cannot calculate dinamically the X or Y axis maximum value, which would allow me to round up to the nearest multiple of some value.
It would be great if these requirements could be addressed in a future release of HTML DB.
Bye,
Flavio

Oh yes, my wish list for iTunes:
- Clearer messages that are more intuitive than what appears now.
- The ability to store/swap apps/music/etc. temporarily off-line (because of iDevice storage constraints)
   A backup/offline storage area that is ignored when syncing
- iTunes should respect apps and app folder content and placements
- Allow for multiple iDevices (with different content) on same iTunes account
   I have an iPod, iPad, and iPhone - I want to be able to independently sync them on a single computer
  with a single iTunes account.
- Make it easier to sync in either direction (and change sync direction)
- Allow syncing (or backing up) of apps content. For instance, QUICKVOICE app! I cannot sync the content of this app! Apple doesn't allow access to the datastores (like Android) - very frustrating that I may have to resort to backing up this audio analog via an audio cable! Ridiculous!
- Allow us to use the iDevice as a temporary USB storage device! Grrr... this is frustrating that I cannot do this! I admit, this has little to do with iTunes
   However, it is the forced requirement of iTunes that is frustrating. This means that I cannot easily place documents to/from my iPhone (documents too large to email) when I at work because iTunes is not an allowed software.

Similar Messages

  • Itunes sync problems (and wish list)

    No doubt the iPhone is the most beautiful mobile phone with the greatest (and most consistent user experience). Unfortunately, the same cannot be said for iTunes! This tool (and being forced to use it) is the single greatest frustration in the iPhone experience!
    I am sure many may not agree with me, especially considering it works fairly well as long as you don't change computers, want to sync two different iDevices (with same account BUT different content), temporarily remove apps/songs because of storage limitations, use app folders and expect iTunes to respect their content and placement, or try anything else outside iTunes limited scope. In short, iTunes is either incredibly non-inuitive, I am an idiot for not figuring it out, or it is absolutely the worst part about the iDevice family.
    My problems began when I changed computers and since then, I have not been able to sync to my new computer. The problem is (or seems) that iTune is insisting on syncing in *one direction only*, with the message, "Are you sure you want to sync apps? All existing apps and their data on the iPhone "xxxxxxx" will be replaced with apps from this iTunes library." This message appears when I attempt to check the Sync Apps check box.
    So what do I do? I have already deleted iTunes and reinstalled it.
    - Yes, I have right-clicked on DEVICES, and selected BACKUP and SYNC and TRANSFER PURCHASES (why so many options AND what the heck are the differences?)
    - If I ignore that dire warning and select Sync Apps, the preview window shows all my apps in a jumbled mess. In stark contrast, my iPhone apps are arranged in my own logical order and placed in organized app folders. I am afraid if I click SYNC, this is the mess that iTunes will send to my iPhone!
    All I want to do is start over... I just want to back up (or sync) the contents of my iPhone like I have done for the past two years.
    Can someone please tell me how to sync iPhone ---> iTunes?
    I love iDevices... if I have to purchase another tool, I am happy to do so.
    What about Touchcopy? http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CPqksPK0wbICFYdxQgodV EQAGQ
    Or is iTunes more capable than I realise?
    Thank you for your kind assistance!

    Oh yes, my wish list for iTunes:
    - Clearer messages that are more intuitive than what appears now.
    - The ability to store/swap apps/music/etc. temporarily off-line (because of iDevice storage constraints)
       A backup/offline storage area that is ignored when syncing
    - iTunes should respect apps and app folder content and placements
    - Allow for multiple iDevices (with different content) on same iTunes account
       I have an iPod, iPad, and iPhone - I want to be able to independently sync them on a single computer
      with a single iTunes account.
    - Make it easier to sync in either direction (and change sync direction)
    - Allow syncing (or backing up) of apps content. For instance, QUICKVOICE app! I cannot sync the content of this app! Apple doesn't allow access to the datastores (like Android) - very frustrating that I may have to resort to backing up this audio analog via an audio cable! Ridiculous!
    - Allow us to use the iDevice as a temporary USB storage device! Grrr... this is frustrating that I cannot do this! I admit, this has little to do with iTunes
       However, it is the forced requirement of iTunes that is frustrating. This means that I cannot easily place documents to/from my iPhone (documents too large to email) when I at work because iTunes is not an allowed software.

  • E71 Feedback and Wish list for future development

    Hi Nokia and Nokia Fans.
    E71 is a masterpiece but I believe there's much room for improvement. My E71 is indispensable to me. I wish Nokia will strive to thrive the E series and in particular the E71.
    Here's my wish list / features to add:
    1. A Task Manager for Symbian that's Nokia naively developed is absolutely essential as it's required to manage all aspects of applications, processes and threads, especially the misbehaving ones.
    2. Use better GPS Chipset with better sensitivity as the current one is really slackly.
    3. High-Speed WiFi connection to access and manage the phone including the mass storage instead of fiddling with wires.
    4. Secure zone for creating password-protected notes/memos/etc, previously called "wallet".
    5. Add SMS "Listen" feature for sent messages.
    6. Add "Timed" Profiles.
    My feedback / Issues to fix:
    1. "Memory card in use" Error. Despite proper removal of USB connection when using PC Suite or Mass Storage data transfer.
    2. Configure to display "Firstname Lastname" format .
    3. Configure Date display to American format (Wednesday December 03 2008).
    4. Save current "configurations and user preferences" for future deployment after firmware upgrade or maintenance routine.
    5. When receiving a Bluetooth message with (.sis or .sisx) attachment, provide save to memory card option rather than launching installtion process.
    6. Setting up "WPA2 Only" mode on WLAN Security Settings for a particular Access Point will not allow communication despite the access point router/gateway is configured to work on this particular mode.
    7. Camera is another isssue. Fix color fidelity and picture clarity issues.
    Thanks
    .......To be revised as needed.

    Nice wishlist, willing to front up the extra cash to have these features? Got to remember that until these feature become more common they will stay as premium items and that you need to pay the extra money or move to a higher priced plan for them. Getting something like device locks would be great though but then what would device locks do for a customer base? and they do have the data encryption built in....
    I would like to see a 16:9 aspect ratio in the next version of the phone myself. A holster pouch w/ belt clip rather than looking for and buying an ill fitting pouch cos I really don't like the pouch it comes with and cant find a nice one. The ability to have more than just the plain 6 applications on the screen, it used to scroll if I remember correctly in the older ones. The ability to skip music tracks when pressing volume up or down. 3.5mm audio jack. Time and date or at least time shown on the top strip of the display when going through the menu (there are a number of time I want to know the time and have to program juggle to find out what it is. More symbols on the other keys rather than just on the right hand side, I do have 2 thumbs available to use and fairly dexterous with either hand.
    Less "download - **bleep**" in the web menu it takes me to a link with useless stuff on it.....
    That GPS chip needs to be replaced, it has me walking down the road or in my neighbours house when I'm just lying in my lounge.
    This wish is for all Nokia Symbian devices, I would love to see a Nokia App store. I'm sure it'll come around once they get the symbian foundation off the ground but i'm impatient and a lil lazy and haven't always got the time to find an application for something I have thought up. Blackberry and Apple have got something of a centralised store up and running, C'mon Nokia! Get a move on!
    Nokia E71-1 (254.03)
    110.07.127
    RM-346

  • SVG pipe chart problem!

    Hi guys I will need to develop an application in htmldb 2.0. In this version of apex I can use only svg charts. And I have a problem with pipe chart , when I have this values
    label     value
    B     100
    C     0
    In this situation on the page appear sth that dosent look like a pip chart, any ideas?
    Slavi

    Hi guys I will need to develop an application in htmldb 2.0. In this version of apex I can use only svg charts. And I have a problem with pipe chart , when I have this values
    label     value
    B     100
    C     0
    In this situation on the page appear sth that dosent look like a pip chart, any ideas?
    Slavi

  • Missing Features, Bugs, and Wish List for Apple Engineers

    I LOVE my iPhone. It is by far the best phone I have ever had. The interface is awesome. Great job Apple, but there are missing features and bugs that all of us want updated or wish were added. I know they were probably already thought of by Apple, but in an effort to make the phone perfect removed to make it more stable. Now that it is out lets make it perfect.
    This thread will hopefully give you guys guidance from the early adopters who share your love for the phone (and others who want to chime in). I want to separate the list into a few categories and hope everyone will add to this thread with their ideas:
    1) BUGS/CHANGES TO EXISTING APPS:
    - Period should be in alphabet keyboard (make space smaller) or when you go to symbol keyboard and hit period it should automatically go back to the alphabet keyboard (unless you double click the symbol button which means stay there like caps lock)
    - Individual delete (like Mail) of all lists (eg. call list, bookmarks list, history etc.
    - Multiple item in a List delete (see below for how to select). This is also so un-Mac like to not be able to select multiple items to delete. It is all or none for clear/delete on the iPhone.
    - Implement double finger slide...in maps double finger tap zooms out so the OS recognizes this, why don't you use a double finger drag to mean "select". There is no way to select some words in a sentence or a group of items. This could be how. eg. In a list (eg Mail) double finger slide over items you want to select (instead of singer finger drag which moves the list) then one finger slide to the right to delete the selected items from the list.
    - Copy and paste. Since there are no menus this would require a gesture (ala newton)
    - when you tap the battery icon it should bring up a battery status dialog (ala wifi join dialog where the screen dims): present charge, big battery icon (like the charging one), time left. In addition, instead of giving battery usage details only after a full charge, give it at any point.
    - Since you know that nights and weekends are at set times (and not variable like it was on Sprint where I came from)...the phone usage details should be broken down into: peak minutes used and N+W minutes used (not hard to figure out since you know the time and dates of calls)
    - Be able to change font/background etc in Notes app
    - faster way to get to favorites in the killer phone app after turning on phone. Just seems like it takes too many taps to get there to make a call on a phone.
    2) WISH LIST FOR NEW APPS (apps that can be added with existing hardware, see #3 for other wishes)
    - iChat (obvious and probably almost done)
    - VOIP (probably not going to happen, and wouldn't work in Europe where I would need it most gven network speeds there)
    - Flight tracker widget
    - Exchange support (probably in the works)
    - Push email from gmail and .Mac (probably in the works)
    - Bluetooth sync
    - DUN (probably not going to happen since AT+T does not want it)
    - Data/File storage with sync
    - TODO APP that syncs to to do in iCal
    - Ringtones, definitely from songs from iPod side (obvious and coming soon I am sure)
    -Search function like spotlight. Global would be awesome, but even just in contacts
    3) FUTURE HARDWARE RELATED WISHES (stuff we wish could be in hardware version 1 but know require a version 2):
    - GPS
    - 3G
    - LED that changes color and/or pulses (like MacBooks sleep light) that indicates things (eg charge status, Voice mail status, roaming status etc) without turning on the phone
    - Move camera to front to allow video conferencing (I doubt Steve would allow since it would mess up the clean front look)
    Well I could go on and will add to this thread later, but I need to go to work to show everyone (and sell more apple stuff since many of my colleagues have been converted to macs). Now, all you pioneers, start adding things to help our beloved phone become better!
    Peter
    iMac   Mac OS X (10.3.6)  

    I agree with your post! I'm amazed by the simplicity, the screen, and the apps on the iPhone. They all have worked wonderfully for me, with just a few crashes while surfing or loading big email images. (I heard that shutting down the phone and restarting helps that.)
    The single flaw for me is that the phone app itself should be primary, with more options (quicker access, unique ringtones, voicedial?) and ease of use. The other applications are so elegant, but I need my phone to be very accessible and practical too.
    My wish list:
    1) Make it fewer taps to get to the point where you can make a phone call. How about the main button can be programmed to take you wherever you want. I'd choose to go to Phone Favorites, so I could speed dial right away.
    2) Be able to set a preference as to what app you're in when you wake up the phone. I'd choose phone keypad, some might choose iCal, etc.
    3) Add the period and comma symbols to the alpha keyboard.
    4) Allow different ringtones for specific caller ID's.
    5) Copy and paste.
    V2) With new hardware, add a "back" button to return to prev. screen. It could be small, on the side near volume?
    2.33 ghz dual core Intel Imac   Mac OS X (10.4.9)  

  • Purchased and wish list is empty

    Yesterday I found that on my iPhone 5S, the purchased list & wish list in app store beame empty. I have paid for many apps before and they all disappeared from my list. When I searched for the apps I bought, it shows the price or the "free" icon instead of the cloud icon. I tried logging out and restarted my phone, neither worked. I also tried to buy new apps that I've never purchased before but after a new download, I still can't see the apps I just bought. When I uninstalled them, it didn't show the cloud icon meaning I can't download again. On the other hand, on my 4th gen iPad with same apple ID, I can see my purchased list but can't download the apps.
    I'm running iOS 7.1.2 on both my iPhone 5S and 4th gen iPad.
    Can somebody help me with this please? Thank you!!

    Hello, panamera1103. 
    Thank you for visiting Apple Support Communities.
    Here are the steps on how to download your past purchases.
    Download past purchases
    http://support.apple.com/kb/ht2519
    Cheers,
    Jason H.

  • Svg line chart  problem with latest patch?

    Hi team,
    I was checking out one page containing an SVG chart that I didn't modify in 2 weeks, according to the application builder, but it seems to hang after displaying the first line series of 4 total.
    It was working before the last patch was installed.
    It's page 65 of application 21670 in the online environment.
    Choose "automobile" from the first drop down list and click on the button, the chart appears but then it seems to be waiting for something to download.
    If you move the mouse over any textual part, you can see in the status line the following message:
    "xml processing instuction not at start of external entity: line 172, column 0".
    If you open up the SVG source by right clicking on the chart, you will see at the end of the file an error text message returned by oracle (ORA-06502), but what is particularly strange is the presence of an <?xml> processing instruction just in the middle of the source code listing.
    It looks like it is trying to append the second chart series by appending another svg source file.
    Could you check if I did anything wrong or if it is a problem of the patch?
    I have got other chart type running without problems.
    Thanks!
    Bye,
    Flavio

    Things are getting complicated.
    I found some cases where the chart is displayed correctly, which made me think of some unexpected values returned by the underlying queries.
    Since my chart is made up of 4 different series returning 12 points each, I assembled the queries with UNION ALL and checked out what was returned both in a failing case and a successful one but I can't figure out a valid explanation, the only thing I notice is that in the failing case there are some values higher than average, say 10 times bigger than the average value and for some reason the chart stops drawing points exactly after the peak value (1155.62, see below).
    Each series returns exactly 12 points, some nulls, but that's doesn't seem to be the problem.
    I wonder if the problem is with the "autoscale" algorithm, but I am lost at the moment...
    Here is a successful data sample:
    - APRIL -
    - APRIL 119.57125
    - APRIL -
    - APRIL -
    - AUGUST 160.5
    - AUGUST 157.53
    - AUGUST 157.53
    - AUGUST 119.57125
    - DECEMBER -
    - DECEMBER 119.57125
    - DECEMBER 113.67
    - DECEMBER 131.214
    - FEBRUARY 104
    - FEBRUARY 119.57125
    - FEBRUARY 126.418333333333333333333333333333333333
    - FEBRUARY 125
    - JANUARY 153
    - JANUARY 119.57125
    - JANUARY 134.845
    - JANUARY 145
    - JULY 154.56
    - JULY 119.57125
    - JULY 154.56
    - JULY 154.56
    - JUNE -
    - JUNE -
    - JUNE -
    - JUNE 119.57125
    - MARCH 43.5
    - MARCH 119.57125
    - MARCH 106.918333333333333333333333333333333333
    - MARCH 100.166666666666666666666666666666666667
    - MAY -
    - MAY 119.57125
    - MAY -
    - MAY -
    - NOVEMBER 118
    - NOVEMBER 131.214
    - NOVEMBER 125.3775
    - NOVEMBER 119.57125
    - OCTOBER 164
    - OCTOBER 119.57125
    - OCTOBER 134.5175
    - OCTOBER 134.5175
    - SEPTEMBER 59.01
    - SEPTEMBER 119.57125
    - SEPTEMBER 124.69
    - SEPTEMBER 124.69
    and now an offending one:
    - APRIL -
    - APRIL 287.743333333333333333333333333333333333
    - APRIL -
    - APRIL -
    - AUGUST 1155.62
    - AUGUST 655.09
    - AUGUST 655.09
    - AUGUST 287.743333333333333333333333333333333333
    - DECEMBER 135
    - DECEMBER 287.743333333333333333333333333333333333
    - DECEMBER 197.2525
    - DECEMBER 349.865
    - FEBRUARY 114
    - FEBRUARY 287.743333333333333333333333333333333333
    - FEBRUARY 315.947142857142857142857142857142857143
    - FEBRUARY 130
    - JANUARY 153
    - JANUARY 287.743333333333333333333333333333333333
    - JANUARY 321.741428571428571428571428571428571429
    - JANUARY 190
    - JULY 154.56
    - JULY 287.743333333333333333333333333333333333
    - JULY 154.56
    - JULY 154.56
    - JUNE -
    - JUNE -
    - JUNE -
    - JUNE 287.743333333333333333333333333333333333
    - MARCH 223.5
    - MARCH 287.743333333333333333333333333333333333
    - MARCH 182.787142857142857142857142857142857143
    - MARCH 156.375
    - MAY -
    - MAY 287.743333333333333333333333333333333333
    - MAY -
    - MAY -
    - NOVEMBER 118
    - NOVEMBER 392.838
    - NOVEMBER 452.4075
    - NOVEMBER 287.743333333333333333333333333333333333
    - OCTOBER 354
    - OCTOBER 287.743333333333333333333333333333333333
    - OCTOBER 461.5475
    - OCTOBER 461.5475
    - SEPTEMBER 182.01
    - SEPTEMBER 287.743333333333333333333333333333333333
    - SEPTEMBER 497.396666666666666666666666666666666667
    - SEPTEMBER 497.396666666666666666666666666666666667
    Weird, isn'it?
    Bye,
    Flavio

  • Raptor niggles and wish list

    Hi,
    I've been testing it for a day now and a few of our developers have been testing it out. General comment is that it is a good tool and welcomed.
    I have encountered a few niggles:-
    - Could do with a handier refresh button to refresh the current window
    when you have updated invalid objects. The information is not updated in the
    dependencies window straight away, even when you close the window down and reopen it, plus you have to hunt for the refresh button.
    - Running sql reports should be as easy as select and run without having to
    strip or alter any existing reports that currently work on sqlplus.
    - Addition of a "close all connections" option, when closing the interface.
    - Stores the password from the last login, should have option to store or not
    to store, the default being not to store. This could cause problems if users
    share a computer for any reason.
    - Can you rollback from a series of insert statements in a session??
    - For testing plsql code, it would be better to have the input field in the
    parameter list at the top as opposed to having to add it into the raw code.
    - When disconnecting from a database connection, it should remove the
    named DB connection from the list. As selecting it again automatically restarts the connection. Could be convenient for some users, but I think this may be problematic.
    Requirements
    ============
    - Option to clear sql history or default to not storing sql and have an option to store the sql history, if you so require.
    - The feature that would make it most usable to our developed especially, is if it contained a Designer esq design editor visualization tool. Something to provide a physical diagrammatic representation of the tables, FK's, sequences etc. Options to reverse engineer the diagram from existing schema's would be nice and a function to save and print the diagrams.
    - Running plsql, when selecting the dbms output window, it would be nice if
    this window remained open, when the plsql was rerun. Alternatively, if there was a way to pin it open as an option and leave the default action as it is as returning to the results tab that would be great also.
    This is the feedback I have received so far.
    Regards
    Karen

    Few more othe annoying issues:
    4. When there is a phone in the contacts (e.g. sent by bluetooth) you can't change the tag of what each phone is with one of the presets. You have to type it yourself!!!
    5. No setting for the Alarm volume
    6. There seems to be no way to select a different sound for the Calendar Alarm.Message Edited by morph on 24-Jun-200704:44 PM

  • [sentinel] correlation problem and dynamic list

    Dear All,
    I have two problems as following:
    1. I have write a correlation rule as following:
    filter((((e.CollectorPluginName = "Microsoft Exchange POP3") and
    (e.EventName = "pass")) and (e.XDASOutcomeName = "XDAS_OUT_FAILURE")))
    flow window(((w.SessionID = e.SessionID) and (e.SourceIP =
    w.SourceIP)),filter((((e.CollectorPluginName = "Microsoft Exchange
    POP3") and (e.EventName = "user")) and (e.TargetNewResourceName inlist
    sensitiveuser))),120) flow
    trigger(5,120,discriminator(e.SourceIP,e.TargetNew ResourceName))
    I have following problem:
    I will call the first filter event as A event, the second filter event
    as B event, the first filter corresponding log include username field
    named TargetNewResourceName, the second filter event also called as
    storaged event,
    but B event log does not include username field, so I don`t know who
    logon failed, so i need gain the username from A event, there is same
    sessionID between A and
    B, customer`s demands need know who logon failed when user logon to
    pop3 mailbox failure three times, so correlation results is following:
    username: $TargetNewResourceName$ logon to mailbox failure via pop3 at
    least 3 times in two minutes, sourceip: $SourceIP$,
    MacAddress:$CSOTSourceMac$,Please pay
    attention to it!
    But correlation result is following:
    username: Null logon to mailbox failure via pop3 at least 3 times in two
    minutes, sourcip: 10.108.54.50, MacAdress: 247703743F34,Please pay
    attention to it!
    There is no username value($TargetNewResourceName$), why?
    2. I know arcsight active list(same as sentinel dynamic list) support
    multiple fields in one table, but sentinel dynamic list only support
    alone value,
    if I want storage ip and macaddress for DHCP logs into one table, How to
    implement? and that I also correlation rule can invoke function same as
    get_ipaddress or
    get_dhcpaddress in arcsight, Does sentinel provide same function?
    thanks
    steve_zeng
    steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
    View this thread: https://forums.netiq.com/showthread.php?t=48076

    This sounds like a Sentinel product, vs. Sentinel plugin, issue. Please
    post it in the Sentinel list on forums.netiq.com to get exposure to the
    largest group of people who may be able to help. This list is
    specifically for plugins.
    Also, when posting in the other list, if you can post the raw data from
    each of the events that may help others understand with which data you
    have to work.
    Good luck.

  • 5800 homescreen problem and ringtone list problem.

    i am facing two problems:
    1.Usually when the music player is running you can see the song name and duration on the homescreen. This has disappeared for me. Calendar entries dont show as well. I use handy shell whose task manager i used to kill the homescreen accidentally. I tried restarting the phone and restoring the factory settings. Kindly help.
    2.In my gallery and in my ringtone list there is this one track which appears 96 times! i deleted the track but the entry wont go away. how the hell do i get rid of it??!!
    thank you.

     use option #3, its not usually what it is meant for but if you cant remove a file then that might be a way to go. also did you try to remove it from your memory card via card reader in your computer and see if this helps any ? the option #3 will erase everything off your phone so make sure that you do have a back up. also i think that you store your stuff on the memory card so try this first and see if it works for you. 
    1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
    2. *#7370# - Reformat your phone
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • E65 gripes (and wish-list)

    Just finishing my 2nd week of ownership of this phone, and while the pros outweigh the cons by a substantial margin, at the end of the day, there are some features I miss that were brilliant on my old 6230i.
    1) No timed profiles - this was a really neat feature I wish they'd put back. Often I'd go into a meeting and just put my phone on timed-silent. Great feature if you constantly forget to change back to general setting.
    2) Selective alarms - would be nice to have the alarm only go off on the weekdays. Now, it's all or nothing. I found a 3rd party application (Smartbian) that gives this functionality, but it's got an annoying bug that doesn't shut off the alarm by clicking the stop button.
    3) Poor Bluetooth GPS support - I think this could be my own fault for not checking compatibility at first, but you'd expect that this brand-new model would have some forward compatibility with Bluetooth devices, specifically the new chipset GPS units being promoted on ebay.
    That's it for now. Like I said, this is a nice phone, but at the end of the day, I think I should've waited a couple of weeks for the 6110 Communicator to be released (with the same plan, nonetheless). For now, I'm going to try to sell the GPS unit and recoup some of my costs.

    Few more othe annoying issues:
    4. When there is a phone in the contacts (e.g. sent by bluetooth) you can't change the tag of what each phone is with one of the presets. You have to type it yourself!!!
    5. No setting for the Alarm volume
    6. There seems to be no way to select a different sound for the Calendar Alarm.Message Edited by morph on 24-Jun-200704:44 PM

  • Bug list and wish list premiere pro cs4

    Iam realy interesting someone, sometime work with Premiere pro cs4 from Adobe team ? I gues not!! Some bug might not seen only people who not work on premiere !!! 2 russian video editing forum named premiere cs4 most worst of version premiere. Old bugs not fixed on premiere cs3 adobe make premiere cs4 with new most worst bugs and some options was remove(Fast export to frame\movie) What for ????!!!!! Cuting the clip i must press 2 button - what for ? Cut it most usful operation and adobe make 2 button press to cut. And domenation effects then adding to clip, please try add some effect to clip then add someone again. Why new effects adds not to last posotion ?
    And time warp, posterize time work only with neast sequence!!! What for !!!Its make work with premiere faster ????
    ADOBE PLEASE WORK YOUR SELF ON PREMIERE PRO CS4 SOMETIME !!!

    FAQ:How/Where do I report a bug?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Any ETA on an update to correct the issues and wish lists in this forum

    Hi its been a month or more since the last update (BTW having a release date on teh updates on your website would be great) any news even an update that its being worked on ?
    Ta
    Matt
    Solved!
    Go to Solution.

    All news about upcoming and roll out starts of software will be posted on the product blog.
    http://blogs.sonymobile.com/products/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Wish List, Shopping List in iTunes store?

    I want to save items of interest for possible future purchase, but can't find any way to do it in the iTunes store. Amazon has Shopping List and Wish List, as do other sites, but it appears that the iTunes store has nothing like this. I don't think the shopping cart will work, because everything in it gets purchased at once, so you can't really save things for later.
    Any tips?

    I tried your suggestion, and came up with more problems.
    I couldn't drag movies from the store into the new playlist. The only way I can get a list view is to do a power search, and I can then drag movies from the resulting list view to the playlist. However, iTunes treated almost all of them as music; only a few showed up as movies. Also, the search results (all movie rentals) that I got in the list view omitted a lot of rentals that show up on the main store page.
    I get the impression that your method is supposed to be easier than this.
    Message was edited by: incredulous

  • C API WISH LIST: New info API or return code for txn- commit()

    One problem I have to solve now is that I cannot txn->commit(txn) if there are
    open cursors using that txn. The limitation itself is ok, but I need to know this
    prior to calling commit, or have commit return a suitable error code.
    What happens now if I call commit prior to closing all cursors using it, is that
    it returns the error code -30975 (DB_RUNRECOVERY: Fatal error, run
    database recovery). Then the db is left in an abysmal state for the user.
    All this is happening within a BDB BASIC interpreter where I can't predict
    the user program's cursor usage.
    The only solution for me at the moment is to track each cursor creation
    on the current transaction within the interpreter, and try to preempt this
    problem.
    WISH LIST: It would be nice to either:
    1. have txn->commit() return a more suitable error, without
    corrupting the db (check for this problem first).
    or
    2. have a way to determine how many open cursors there are
    on this txn, so that I can report the failure back to
    the caller.
    Approach #1 is preferable, since api for #2 has limited use. But # 2
    could be provided as part of DB_ENV->txn_stat(), which currently
    lacks this info.
    Thanks, Warren.

    Oh, that does help. The only worry I have is that this appears to be undocumented and could change on the user trying to build my project with a future release. But, I think I'm willing to risk that, at this point.
    Thanks again, Warren.

Maybe you are looking for