.svgz web preview in save options not working
Hi there
I'm a longtime Photoshop / After Effects type with rather less experience in Illustrator, using a newly built PC system
I've just gone to save a diagram created in Illustrator as a .svgz in order to pass to the web guy, but wanted to preview it first, so hit the Web Preview button in the Save dialogue box.... and nothing happens. I have several browser windows opn - IE9 64bit, Chrome - but the svgz appears in none of them
I presumed maybe I need to link Illustrator to a particular web browser somehow, but can't seem to find reference to how to do this, if it is necessary...
How do I get the web preview to happen?
All help appreciated...
I'm using latest Illustrator in Win 7 64bit
jON
I'm using Illustrator CS5 on Win 7 64 bit, and I cannot get Web Preview to work when suning Export, and exporting a file to Flash swf with frames. I have IE set on the Save for Web option, but no such option exists in the Export dialogue box. This option worked fine for the teacher in the help video that shows how to animate a snowboarder graphic when exporting to svf, but I cannot find anything dealing with this in the forums. Are you aware of why this is not working and how to implement it?
Similar Messages
-
Preview in browser option not working
Hi there,
I'm running dreamweaver cs4 on mac osx 10.4.11. I'm trying to use the 'preview in browser' option without any success.
When I try to preview in Firefox, or any other browser in fact, I get the message 'Unable to launch Firefox.app - Please be
sure that this application exists and that there is enough memory to run it'. I know for sure I have firefox installed as
I use it all the time. I have also set Firefox as the primary browser within Dreamweaver.
Any ideas?
Thanks
SimonNot sure if there's anything in this technote that may help:
http://kb.adobe.com/selfservice/viewContent.do?externalId=d9e959b3 -
After installing lion, my screen saver does not work
I installed lion, now my screen saver does not work. I have tried all the hot corners, nothing. Dashboard and mission control work fine but cannot start screen saver.
Any thoughts on what might be wrong.kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
com.symantec.kext.internetSecurity (1.3.2f5)
com.symantec.kext.pf (4.2.1f7)
com.symantec.kext.ips (3.2f8)
at.obdev.nke.LittleSnitch (2.4.0)
com.symantec.kext.filesecurity (1.4.3f19)
com.symantec.kext.fw (1.0.3f5)
com.symantec.kext.SymAPComm (11.2.2f3)
#2:
Password:
com.wdc.drivemanagerservice
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon
com.symantec.sharedsettings
com.symantec.Sched501-3.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-1.plist
com.symantec.navapdaemonsl
com.symantec.navapd
com.symantec.MissedTasks.plist
com.symantec.diskMountNotify.plist
com.symantec.deepsight-extractor
com.symantec.avscandaemon
com.microsoft.office.licensing.helper
com.adobe.versioncueCS3
at.obdev.littlesnitchd
#3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
com.symantec.uiagent.application
com.epson.epw.agent
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
uk.co.markallan.clamxav.freshclam
uk.co.markallan.clamxav.clamscan
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716
#4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
/Library/Components:
iGlasses.component
/Library/Extensions:
/Library/Frameworks:
.dat1bf4.00c
AECore.framework
AEProfiling.framework
AERegistration.framework
AudioMixEngine.framework
Compressor.framework
DSPPublishing.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
MediaServerAPI.framework
Motion.framework
NyxAudioAnalysis.framework
PluginManager.framework
PrintMeSSL.framework
ProFX.framework
ProMetadataSupport.framework
Qmaster.framework
TSLicense.framework
XSKey.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
NPSVG3.zip
NPSVG3Carbon
NPSVG3ReadMe.html
Quartz Composer.webplugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.epson.epw.agent.plist
com.symantec.uiagent.application.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.versioncueCS3.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
com.symantec.MissedTasks.plist
com.symantec.Sched501-1.plist
com.symantec.Sched501-2.plist
com.symantec.Sched501-3.plist
com.symantec.avscandaemon.plist
com.symantec.deepsight-extractor.plist
com.symantec.diskMountNotify.plist
com.symantec.navapd.plist
com.symantec.navapdaemonsl.plist
com.symantec.sharedsettings.plist
com.symantec.symSchedDaemon.plist
com.symantec.symdaemon.plist
com.wdc.drivemanagerservice.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
SymantecQuickMenu.prefPane
VersionCue.prefPane
VersionCueCS3.prefPane
/Library/PrivateFrameworks:
SymAVScan.framework
SymAppKitAdditions.framework
SymBase.framework
SymConfidential.framework
SymDaemon.framework
SymFirewall.framework
SymIPS.framework
SymIR.framework
SymInternetSecurity.framework
SymPersonalFirewall.framework
SymScheduler.framework
SymSharedSettings.framework
SymSubmission.framework
SymUIAgent.framework
SymUIAgentUI.framework
SymWebKitUtils.framework
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
Motion.component
iChatTheaterPreview.component
/Library/ScriptingAdditions:
Adobe Unit Types
Adobe Unit Types.osax
SymWebKitUtilsSL.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iMovie.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
AdobeVersionCue
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
ATBas
ATBraIro
ATBroScr
ATChe
ATIsa
ATMcCol
ATRap
ATUnc
Arial
Basque, etc.
Branding Iron, etc.
Brush Script
ClearGotBolDTC
ClearGotExtBolDTC
ClearGotLHBla
ClearGotLHBol
ClearGotLHLig
ClearGotLHMed
ClearGotLHRom
ClearGotMTBol
ClearGotMTDemBol
ClearGotRegDTC
ClearITCbyBTBla
ClearITCbyBTBlaIta
ClearITCbyBTBol
ClearITCbyBTBolIta
ClearITCbyBTCon
ClearITCbyBTHea
ClearITCbyBTHeaIta
ClearITCbyBTReg
ClearITCbyBTRegIta
Clearface Bd BT
Clearface Blk BT
Clearface BlkIt BT
Clearface Ctr BT
Clearface Gothic A
Clearface Rg:Hv BT
Clearface.ttf
ClearfaceGothic ExtraBold DTC
ClearfaceGothic Regular DTC
ClearfaceGothicLH Bold
Clearface_Gothic_MT_Bd MT
Clearface_Gothic_MT_Dm_Bd MT
Clearly Gothic Light.ttf
Clearly Gothic.ttf
EmbasBTReg
Embassy BT
FIRESTARTER.TTF
FLAMER.TTF
Firecat.ttf
Flame.ttf
Flames.ttf
Redd Or Dedd.ttf
SEAWFA__.TTF
Smokteq.ttf
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
chp-fire.ttf
encodings.dir
fonts.dir
fonts.list
fonts.scale
scythe.ttf
Library/Frameworks:
EWSMac-GC.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Move-Media-Player.plugin
WebEx64.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.ARM.ad895013aeb33ea6e968d9fdc06c0eb42c7c2a5229d98d64ad002716.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.B6A794DC-82A7-47AB-9171-208 B8AEB5B61.plist
com.apple.SafariBookmarksSyncer.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.zeobit.MacKeeper.Helper
uk.co.markallan.clamxav.clamscan.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
MouseLocator.prefPane
#5
osascript -e 'tell application "System Events" to get name of every login item'
2012-03-17 18:58:32.172 osascript[669:8703] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
I hope I copied these correctly. -
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595> -
Preview and Mac Mail not working after upgraded to 10.4.11
Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
BennyThere are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
Wifi option not working in my i phone 4s ios 7.0.2, how to fix it
wifi option not working in my i phone 4s ios 7.0.2, how to fix it
Now my wifi is working but not showing the wifi logo on the top
-
Satellite A660-11M on Windows 7 - Toshiba Power Saver does not work
I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!Toshiba Power Saver is only for XP installations, you can't install the XP Drivers (and most Vista Drivers) in Windows 7.
Make sure all your drivers are for the A660, and make sure they are for Windows 7. -
Hot corners enabling screen saver/ ss not working; restart they're working
Hi, for no discernable reason, my hot corners which are set to start secreen saver were not working; neither it seemed was my screen saver turning on. My computer seemed simply to be going to sleep from the screen image of the desktop without benefit of having gone through the screen saver cycle first. I ran disk utility and verified permissions. Then I did the old pc trick of rebooting the computer. That seemed to have done it. My hot corners are working the way they were set up to function. Por Que? Why is my PB G4 behaving like a PC?
Thanks.Hi, Nagafugi
Had the same problem and here's what worked for me:
Navigate to System Preferences/Desktop & Screen Saver/ and click the Hot Corners button.
I generally set the bottom left corner to Start Screen Saver, with all of the other corners set to minus. I temporarily set the top left corner to Disable Screen Saver, and after moving the mouse pointer into that corner, I was then able to use my bottom left corner again to start my screen saver.
I put the top left corner back to minus.
Simple enough and good luck!
penniewize -
I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?
Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up. -
My screen saver only works when no one is logged on. Otherwise, the screen saver never kicks in. I have a Toshiba Satellite M305-S4848.
Satellite M305-S4848
Do you use a wireless mouse?
The screen saver does not work when you use a Microsoft wireless pointing device on a Windows Vista-...
-Jerry -
I have a 1 week old mac book pro.
I am running the latest issue of FCP X.
Auto save does not work !
I just lost some work after shutting down and restarting the program.
Apple for gods sake dont release a program that doesnt perform the basics.
And give us back the ability to save projects when and where we want !
FFS !Will Power PT wrote:
I have a 1 week old mac book pro.
I am running the latest issue of FCP X.
Auto save does not work !
I just lost some work after shutting down and restarting the program.
Apple for gods sake dont release a program that doesnt perform the basics.
And give us back the ability to save projects when and where we want !
FFS !
Apple knows best... except when they don't.
Send your request to Apple by using Feedback. -
Satellite A660-11M - Power Saver does not work
I have a Satellite A660-11M and I work on Windows 7 Ultimate
The problem is that I have download all drivers and updates but the toshiba power saver does not work its installed with no error and TPSLaunch (green icon) does not open when I click on it and no icon I found in the control panel for the program afterIi install all the Value Added Package!Hi buddy,
Wait a moment, please.
Im a little bit confused about your posting First you write about Power Saver and then about green icon Which one you mean exactly and whats the problem?
If you mean Eco mode you have to install Eco Utility from official Toshiba website. -
I am trying to create a web gallery in CS6. I have done this before in Photoshop with CS3, but now that it has changed to bridge it doesn't seem to work for me. There is no preview option within Bridge which is a bit frustrating, but I at least have the "preview in browser" options. Except, when I hit "preview in browser", my browser opens but it just opens to the current window open - I am not getting a preview at all. The only way I can seem to preview is to save the file, then open it in the browser - but this way I cannot play with the various settings and I am finding it very frustrating.
There should be a way in Bridge to change the default browser. Perhaps my browser settings are not allowing it to open, however, I cannot find an option to switch it open in another browser... also very frustrating.
This extremely simple web gallery creator, which I have used easily in CS3, seems to be less user friendly in Bridge.
Any ideas on how to change browsers or fix the browser I am currently using to use the "preview in browser" button?I am trying to create a web gallery in CS6. I have done this before in Photoshop with CS3, but now that it has changed to bridge it doesn't seem to work for me. There is no preview option within Bridge which is a bit frustrating, but I at least have the "preview in browser" options. Except, when I hit "preview in browser", my browser opens but it just opens to the current window open - I am not getting a preview at all. The only way I can seem to preview is to save the file, then open it in the browser - but this way I cannot play with the various settings and I am finding it very frustrating.
There should be a way in Bridge to change the default browser. Perhaps my browser settings are not allowing it to open, however, I cannot find an option to switch it open in another browser... also very frustrating.
This extremely simple web gallery creator, which I have used easily in CS3, seems to be less user friendly in Bridge.
Any ideas on how to change browsers or fix the browser I am currently using to use the "preview in browser" button? -
CS5 Save to Web; multi-artboard crops do not work
My custom artboards no longer crop graphics properly. Instead of a specific targeted crop area, it just creates a jpg or png of ALL art on displayed layer. What did I turn on or off? Yeah, exporting the graphics works, but I want to control the final image size and preview too. What happened?
Thx for your response, however it is still not working the way it has previously.
I have created a 2nd artboard to crop a specific image with bkgd bleed. In the past, I would select 'artboard 2' (the cropped image area) then go to 'SAVE FOR WEB & DEVICES' which would then provide a preview and further options like PNG, JPEG, final image size, etc, before saving. For some reason it is ignoring my designated crops and saving everything visible. Although the "export" option works, it doesn't have the control options as the SAVE FOR WEB & DEVICES.
I'm pretty sure I inadvertantly turned something on/off since this was an oft used save command. -
InfoPath 2013 - Rich Text box - Expand to show all text option not working
I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
expand the size of the text box based on the content length.
same thing used to work in InfoPath 2010.
Any suggestions?
Thanks,
NeeleshHi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.
Maybe you are looking for
-
Bad performance with many xmlqueries in select and big resultset
I'm running into big performance problems with the following query (edited the query a bit to remove sensitive information): SELECT id "id",created "created", xmlcast(xmlquery('declare default element namespace "http://www.example.com/myproject/sch
-
What should default permissions be of the Groups folder be?
While trying to sort out our Group shared folders permissions problems I might have changed the permissions of the Group folder (/Volumes/Server/Groups) in Server Admin. Can anyone tell me what the default permissions for that folder should be?
-
Footage out of image safe area
Hello, I'm working something for a friend. She has a scene where the person's head is out of the image safe area. Is there a way to fix that other than a re-shoot? I am guessing not but wanted to make sure. I'm using FCP 5. Thanks
-
File-to-idoc erro while creating IDOC
Hi, I am working FIL-TO-IDOC scenario. my idoc : DESADV.DELVRY03. while creating IDOC in target end created with error status 51. the error is POSEX field is empty. I gave the value for POSEX then i tried it is giving another error..'field PO
-
How I can chose another e-mail to confirm Id activation?
I've tried so many times to activate My Apple ID, the problem is when I reseive the e-mail and it says click the link below, there is no link, so I can not confirm that thins is my e-mail