Sview08 unable to switch computers

I have a sview08.  Around december i noticed it has started to act up, and now I am unable to get it to switch computers via button.  I have to hit the power button and turn it on/off and then i can switch 1 time if i do it when i turn it on.  Then its stuck on that pc.  I have powered down all my computers and reset the switch.  It will do the same thing.  now if i turn it off and on and then hit computer 3 right away (while off) the green light will slowly flash.  Has anyone ever experienced this issue?  I have regular ps2 mouse/keyboard hooked through the ps2 ports.  I also double check to make sure that the dc plug was pluged in to the back and the wall.

Ok after reading other posts.  I discovered my unit doesn't have a osd menu. however..i found out if i use alt control shift hit a number and press enter it will switch.   On back ihave some dip switches.   is there a dip switch that changed on its own that has rendered the front buttons unusable?

Similar Messages

  • HT1349 I switched computers (running Windows 8.1, 64 bit).   I authorized my new one.   There is no content in my library.   How can I get my library to my new computer?   I cannot deauthorize my old computer.   It died.

    I switched computers.   New one runs Windows 8.1, 64 bit.   I authorized it in iTunes.   I am unable to see any of my library.   I cannot unauthorize my old computer, as it died--hence the new one.

    I have only been running iTunes for a very short time, so it was not backed up.   I know my library is toast.   I can recreate that.   But I should still be able to recover my purchased songs.   There is only music involved, no movies or other media.   Still have an answer?  Thanks.

  • Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi, I activated my CS6 in 2012 under my student licence and still using it. I've heard that you can't run CS6 on multiple computers. How do I transfer it from one computer to another as I am switching computers?

    Hi,
    first, I'm not Adobe's "slave" as you might to accuse me. Most of the posters here are users like me.
    I only can repeat that what I found in Adobe's help sites, as I wrote above. You are free to figure out the "real" truth and - the best would be - you may contact Adobe directly, here are - I'm sure you know them -  the links I would use: http://helpx.adobe.com/support.html  and http://helpx.adobe.com/contact.html.
    Hans-Günter

  • After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G.

    After upgrading from iOS 7.1.2 to iOS8 on my iphone5, i am unable to switch 2G/3G, i think apple has removed that toggle. Poor 3G range is here in india-Pune. Requesting Apple Dev. Team to do the needful asap.

    ios 8 *****. i am unable to switch 2G to 3G while it eating my battery. *****

  • HT1414 i am unable to switch on the wifi on my iPhone 4s? I have tried all of the above ways.

    I am unable to switch on the wifi on my iPhone 4s.
    I have tried restart, restore, update etc.
    But its still not working.
    Please help

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • I switched computers and need to download Acrobat 9 Standard and I can't find it

    I switched computers and need to download Acrobat 9 Standard and I can't find it anywhere. Does anyone know how to find it?  I have a serial number -- oi just want to download it!

    Hi Jim8008,
    Please try to download Acrobat 9 Standard setup from the below link.
    https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
    Regards,
    Anand

  • Unable to Switch Audio Sync Settings

    Hey everyone,
    I'm trying to create an animation based off of a 5-minute mp3 audio recording. I need to be able to switch my audio sync settings to Stream so that I can preview audio anywhere in my animation. Currently if I press play just anywhere in the animation it doesn't play the audio. I have to play from the beginning to hear.
    After doing some searching on the Internet, I figured out I have to switch my audio sync setting to Stream so that I can play audio anywhere in the timeline. However, the only option I have available is Event. The other ones are greyed out, as the screenshots below testify. Any help would be appreciated. Thanks!
    Hardware and Software Statistics:
    Adobe Flash Professional CC (CS6) - Version 13.1.0.226
    Windows 7 Home Premium - Version 6.1 - Build 7601: Service Pack 1
    Intel Core i7, 4GB RAM, NVIDIA GeForce GT 525M

    The first the thing a person should always do when they encounter a problem is restart their computer. No worries, I did that.
    I tried converting the file to OGG and WAV to see if it would work better. Apparently Flash Professional handles WAV fine, allowing me to switch between Stream and Event audio sync settings. That's kind of strange, because WAV files are so huge and aren't practical when developing a game or something like that.
    Thankfully, I'm just using Flash Professional to export a video, so I don't care about file size, but it's a disturbing bug.
    If anyone knows why I was unable to switch to Stream audio sync settings with MP3 files, please speak up.

  • Unable to switch on my mw1

    dear sony team
    i am sandeep rathore from chhattishgarh bilaspur i purchasing a sony mw1 month ago but now iits not working , i am unable to switch on, even when i charging the led screen are not showing battery mono pls suggest what i am do.
    regards
    Sandeep Rathore

    You should take it to a Sony repair center
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Unable to switch Central System Administration into Change Mode

    Hi,
    I am bit rusty on the Solution Manager - Central System Administration.
    While experimenting with my Solman system I did the following.
    1. Logged into Solman and started transaction Solution_Manager
    2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
    3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
    4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
    I am unable to switch back the system to Change Mode.
    Am I missing something ? What needs to be done ?
    Regards,
    Siddhesh

    Siddhesh Ghag wrote:>
    >
    > 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
    >
    > Regards,
    > Siddhesh
    This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
    The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
    You might state my name in the message, I will then assist the message processor.
    Best regards,
    Ruediger Stoecker

  • When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    When I switched computers my songs now cut off and don't play out.  How can I get my songs back to play fully that I purchased from ITunes over the past years?

    Other people have been having similar problems with songs over the last few days, I assume that there has been a problem with Apple's servers.
    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting those tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

  • I downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. looks like all of the applications have not disappeared. maybe a trial was uploaded instead of the actual updates? anyway, i just want to get the applicat

    i downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. now I am back using the original computer and it looks like all of those Adobe applications (both 5.5 and 6.0) have disappeared. Maybe a "trial" was uploaded instead of the actual updates? Anyway, i just want to get the applications back onto my computer. i tried to enter the serial numbers on my original packaging but systems side error message from Adobe says they were already "redeemed" (which makes sense bc I already downloaded the updates. Apparently there is no phone customer service for Creative Suite anymore. ARRGGG. Any and all suggestions welcome!
    -Michele

    there is no update from 5.5. to 6.0.
    you could have upgraded from 5.5 to 6.0, but you would know that because you paid money.
    assuming you paid no money for a 6.0 upgrade, you still have your 5.5 license.  uninstall clean and reinstall 5.5 per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • My iPhone 4 has switched off for no reason , and now I am unable to switch this on again ??? if anybody has a answer about how I could reboot it , he's welcome, many thanks .

    my iPhone 4 has switched off for no reason, and now I am unable to switch this on again???if anybody could help about a reboot tip , he's welcome, many thanks...

    1. On your iPhone 4 press and hold both the button and the Home button for about ten seconds. After ten seconds you should see the Apple logo showing up.
    2. Now try to run you phone again and see if it works.
    If a hard reset the still can't get the device back to a working order.
    1. Plug in the device to the cumputer and start iTunes.
    2. Press and hold the Sleep/Wake + Home for 10 seconds.
    3. Once you see the Apple Logo appears, release the power and continue to hold down the home button for about 5-10 seconds. Look iniTunes and see if your device have shows up.
    4. iTunes will notify you that you are now in Recovery mode. Click on OK to continue with the restore process.
    5. Next press and hold on the SHIFT button and click on the Restore button. Select the latest IPSW file and the prompt appears.
    6. iTunes should now attempt to get your device back to the manufacturer setting.
    7. iTunes will later give you an opportunity to restore you content from the PC. Every time when you do a sync, iTunes makes a backup so you can choose the latest backup from the sync.

  • HT4623 I am unable to switch on my IPad as it states that 'iPad is disabled'.  How do i fix this problem when I have no access to the iPad?  Any help or advice will be gratefully received.

    I am unable to switch on my IPad as it states that 'iPad is disabled'.  How do I fix this problem when I have no access to the iPad?  Any help or advice will be gratefully received.

    Forgotten Passcode or device disabled after entering wrong passcode

  • I am unable to switch on/ off my wifi

    I'm unable to switch on /off my wifi, any helps?
    Also I'm having problems through my camera ,when I open my camera app
    And capture a picture the app automatically switches off,also the captured pic is not saved,
    Any helps on this?

    Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Sony Xperia Z1 No Alarm Display and Unable to switch off alarm

    Eversince I had the first Android Kit Kat update, my Xperia Z1 C6903 was not able to hear any notification sounds, my alarm sound worked but unable to switch it off or delete it and when my contacts call me, it send it straight to voicemail and I don't even hear the notifcation call sounds either. Did a reboot and went on safe mode, I still had the same problem. Found out online that there is a sound bug with my current firmware version: 14.3.A.0.681.
    When the new update 14.3.A.0.757 was available, I downloaded it. After this, my sound notifications worked fine, however, my alarm is still not working. Both on normal and safety mode, my alarm does the following:
    1) The alarm sound works
    2) Side key behaviour does not show up on my screen, so I am not able to dismiss my alarm
    3) I manually go to my "Alarm and Clock" app and press the "OFF" indicator. Alarm sound does not stop.
    4) I have to go to > alarm settings >Delete alarms >Choose the current alarm to delete > Alarm Sound then stops.
    This has been happening eversince the Android Kit Kat version was available for download (the previous and current one). I have reboot my phone, gone on safety mode, I have gone to >Settings >APPS> All> Clock > Clear Data, and went to the Sony PC Companion > Support Zone > Repair phone/tablet, as well as deleted all my apps.
    I do not know what else to do. I can only conclude that this is an existing problem with the new software update. I need my alarm working or else I am unable to get up for my morning meetings. PLEASE HELP!

    so i have been having the exact problem on my Z1. the alrm goes off at the right time....the notification works perfectly but you just cannot switch it off or snooze it. if i go to the drop down menu the active alarm is not listed there...the side buttons dont work or have no effect even when configured.
    you literally have to power the phone off for it to stop sounding. this is really annoying and i notice that teh last comment here was a month ago and Sony have still not addressed this problem. if you google this issue there a stacks of people with the same problem and more frustarted as we keep getting suggested fixes like clear clock cache which EVERYONE knows will not work as the problem is not with the data of the alarm....its a bug in the software that prevents the app from excuting teh way it was intended to.
    my alarms worked perfectly fine before teh update was applied. ever since teh update i ahev had this problem. i dont believe that a solution is to install another alarm app from google play store. i bought the phone which advertises the alarm as a feature and if sony cannot fix or address this probelm then you have falsely advertised...
    i am a sold out sony fan...i will never purchase any other brand of phone based on my past experience with sony products but this problem is making me think otherwise. give us a proper fix for this alarm issue and dont treat us like ignorant fools with your suggessted fixes like start in safe mode or reboot your phone....that will never ever fix the problem....its just a way of avoiding the fact that you dont know what to do to fix this problem...

Maybe you are looking for