[svn] 2472: remove flex4. swc - should not have been checked in as it gets produced during the compile

Revision: 2472
Author: [email protected]
Date: 2008-07-14 13:21:25 -0700 (Mon, 14 Jul 2008)
Log Message:
remove flex4.swc - should not have been checked in as it gets produced during the compile
remove StyleProperty.vm - it is no longer used
Removed Paths:
flex/sdk/trunk/frameworks/libs/flex4.swc
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/StyleProperty.vm

My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Similar Messages

  • [svn:fx-trunk] 7787: this should not have been checked in.

    Revision: 7787
    Author:   [email protected]
    Date:     2009-06-12 09:24:18 -0700 (Fri, 12 Jun 2009)
    Log Message:
    this should not have been checked in.  This will fix the build.xml
    bugs: no
    qa: no
    checkintests: pass
    Modified Paths:
        flex/sdk/trunk/frameworks/build.xml

  • [svn] 1931: the ja_JP swc' s should not have been removed from the locales package, I' m adding them back in

    Revision: 1931
    Author: [email protected]
    Date: 2008-06-03 13:30:46 -0700 (Tue, 03 Jun 2008)
    Log Message:
    the ja_JP swc's should not have been removed from the locales package, I'm adding them back in
    Modified Paths:
    flex/sdk/trunk/build.xml

    Hi Manny1/mreider,
    First, I’m sorry to hear that you two may be having issues utilizing a recently purchased Gamers Club Unlocked (GCU) Gifting Card.
    In all reality, our stores don’t even need to exchange the Gifting Card for the standard GCU card, although that option should be available to you if absolutely needed. The GCU Gifting Card can be applied to your My Best Buy membership by simply following the directions on the back of the card.
    Thanks for sharing your feedback and I hope for a much better experience when you return to your local Best Buy to get this taken care of! If needed, please don't hesitate to ask for a manager or supervisor.
    Brian|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • 3.0 should not have been recommended for original 3g iphone

    This software is just too much for the original 3.0, it has slowed my iphone to an unacceptable pace. Can I revert back to the original software?
    Message was edited by: Mark Livingston

    My iPhone 3G 16GB (Japan) became also very slow over time after the 3.0 update.
    There are many people complaining about the problem, this is a fact.
    Was the phone reset/restore part of the Apple 3.0 update procedure? I don't think so.
    Did Apple acknowledge the problem and provide any workaround or fix? Nothing.
    Should we endure the pain to reset and restore / reconfigure the iPhone while Apple did not have a word on this yet?
    Do as you wish... personally I
    switched off Push (mail)
    removed all Safari pages
    turned off / on the iPhone
    It got better - probably not as "fast" as with the previous firmware, but it is now "usable".
    If it may help the developpers, here is the behavior I could observe:
    from 3.0, switching keyboards (En/Jp) was much slower
    writing (in En) was sometimes very slow (typing "Hello" would show H then after 3 seconds e, then after another 3" the l, then "lo" came faster.
    Tapping the input areas would sometimes take ages to start
    starting apps would take longer sometimes, much longer some other times
    scrolling of lists (songs for instance) was less smoother
    [Maps is sometimes wrong by a large margin while GPS (blue sky above) was used (was already the case with 2.1... just a reminder .
    Note: no problem with the battery (seems better)
    Message was edited by: ring_0

  • Ip[od wqas removed from pc when it should not have been

    Hi guys is this bad, as the ipod is dead or can this be fixed
    cheer
    P

    ALL - I tried what you are suggesting, and it "technically" works, but you still end up bouncing back and forth from the left side of the page (where the TV series are) to the right side of the page (where the episodes are).  It is completely annoying...
    Apple, if you are listening, you should be able to scroll WITHIN THE BOX on the left, and then see the episodes on the right.
    I appreciate the suggestions, at least it is a work around, but not at all what one would expect from a new release.
    NOTE TO APPLE:
    I bought into your marketing, have purchased huge amounts of content, so dont penalize me for it by making me jump up and down my screen like a Jack-in-the-box whenever I want to add content to my iPhone or iPad.

  • My Bionic does not work properly. The phone should not have been released...dead Camels

    I took my Bionic back to Verizon yesterday. I am not getting 4G data, and it will not work in the car dock. When I got to the store, I had 4G, and it worked perfectly in the dock, all he did was sit it in. This phone must only work in the store, maybe that is why they released it before it was ready.
    The Verizon technician told me that there were problems with the phone, but that the responsibility belonged to Motorola. He said there was going to be an update in November and that I should wait. This concerns me because it means Verizon will pass the buck on this one.
    What choice do I have? My return period is way over. I am paying for a service that I don't have yet I can't get out of it. If the phone can't be fixed by a software update, then what? At that point, I will either hope for a class action suite, or cancel my contract and pay $350 so that I can get a decent phone....iPhone from AT&T. That would be cheaper than buying a new phone from Verizon under my current contract. I can't keep a phone that never works. 
    I think yesterday was like the straw that broke the camel's back for me. I tried for 15 min to get the car dock to work, and nothing would turn it on. That is when I just drove to Verizon. I figured they should see one more unhappy customer in person instead of just online...alas, no one there gave a **bleep** and they are still trying to sell the Bionic to the unsuspecting customer. It should be pulled off of the shelf until it is fixed.
    Joey

    techwhiz wrote:
    Verizon and Motorola didn't have the time to test the Bionic.
    They were too busy working on the Razr and screwing us.
    PRE-ORDER YOUR DROID RAZR TOMORROW 10.27 8AM EDT
    Introducing DROID RAZR by Motorola.
    The ultimate power of DROID. The legendary edge of RAZR. Combined to form the world's thinnest 4G LTE smartphone. 
    •  Android 2.3 Gingerbread OS 
    •  Dual-core 1.2 GHz processor 
    •  KEVLAR® strong back plate,    Gorilla® Glass face 
    •  7.1 mm thin with big 4.3 inch    Super AMOLED Advanced display
    My Bionic did it again. It is not recognizing the car dock, and it is not getting data connection. I sat in a La Madelains for 15 min hoping for data. Then, when I drove home, I tried the car dock...nothing. This is basically a little 3G tablet with WiFi and a phone. I can do most of that better with my iPad.
    Joey

  • HT4914 Do i have to subscribe to itunesmatch in order to delete a song thatwas downloaded and should not have been purchased?

    Do i have to subscribe  to itunes match to remove two songs from icoud?

    You don't have to subscribe, you can hide songs via your computer's iTunes so that they don't show in Purchased for redownloading : http://support.apple.com/kb/HT4919 (with apps and iOS 7 I've been needing to log out and back into my account on my iPad after hiding them on my computer for them to then be hidden on it, not sure if the same applies to music)

  • ITunes 11 should not have been released with this extreme a bug.

    When I plug in my iPad, and try to add content from the TV Shows section, you cannot scroll past the fist 10 shows.  It just sticks.  When you use the arrow keys, it goes off the page, so you can't see which show you are on, and even though the episode list shows on the right for which ever show you are on (thought you cant see it),but then the title is off the screen. 
    This is HUGE and way beyond something Apple should have caught.  I am a huge apple fan, but totally disgusted at the moment.  Are other people experiencing this issue?

    ALL - I tried what you are suggesting, and it "technically" works, but you still end up bouncing back and forth from the left side of the page (where the TV series are) to the right side of the page (where the episodes are).  It is completely annoying...
    Apple, if you are listening, you should be able to scroll WITHIN THE BOX on the left, and then see the episodes on the right.
    I appreciate the suggestions, at least it is a work around, but not at all what one would expect from a new release.
    NOTE TO APPLE:
    I bought into your marketing, have purchased huge amounts of content, so dont penalize me for it by making me jump up and down my screen like a Jack-in-the-box whenever I want to add content to my iPhone or iPad.

  • Songs should not have been uploaded, but matched

    Hi!
    Why is it many songs of my library were uploaded to iCloud, instead of being matched? When I check this songs in iTunes Store, there they are. Why iTunes uploaded them in this case?

    Hi,
    Have a read at this user tip. https://discussions.apple.com/docs/DOC-4113
    Jim

  • Why do I have to pay for a charge that I should not of been charged then wait for the credit in two to three billing cycles? If I don't pay it I get charged $5 a month late charge?

    So I spent a considerable amount of time on the phone with Verizon about charges on my wireless bill. The conclusion of it was: Pay the charge and we will credit the charge or it will show as a balance due with a $5.00 late fee every month. I got two phones on a promotion in November. Part of the promotion was no activation fee. Got my first bill and a $70.00 activation fee was on it. On line chatted with Verizon and they said it would be credited in two to three billing cycles. I paid my bill minus the activation fee. This month I have a $5.00 late fee and a $35.00 restocking fee because they messed up and sent three phones and I returned one. It was not activated. They might credit me that money back. What is going on?????

        I am so very sorry for any aggravation you've experienced getting your billing straightened out, Nunu1957. It's true that it can take 1 to 2 billing cycles for some account balance adjustments to appear on a statement. While I know you'd rather not have paid your activation fees, the terms of your agreement do require you to do so in order to avoid late fees or even involuntary service interruptions.
    I am concerns about the restock fee. If the device was sent to you in error, you should not have been billed a restock fee. You stated that there may be a refund for the fee. Has that been confirmed?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • I have a Power Book OS 10.4.11 and cant access my radio library.  I believe I deleted something I should not have. How do I reload Itunes and will I loose my music I loaded?

    I have a Power Book OS 10.4.11 and cant access my radio library.  I believe I deleted something I should not have. How do I reload Itunes and will I loose my music I loaded?  I do not have the original software.  I was trying to free up some memory and removed the wrong thing.

    If you mean the listing of internet streams that seems to have disappeared for many users of older iTunes versions over week ago. Probably some update at Apple broke older versions.  No idea if it will ever come back but you can open stream URLs you find on the web and save them in playlists.

  • Newbie: Method should or should not have side effects

    Hi experts,
    What does it really mean when I read for the InputVerifier class that the method 'shouldYieldFocus' can have side effects but the method 'verify' should not have side effects.
    Thanks for you comments.
    tuckie

    I am but a newbie only asked to learn and maintain. The reason I ask about side effects is that the shouldYieldFocus() method is invoked twice for the same tab key event. When the tab key (or mouse click) wants to move focus to another input the current input's shouldYieldFocus() is invoked, it in turn invokes verify() which validates data returning true or false and checks to see if a warning should be issued that the data is legal but high. If the data is not high it also returns true and the focus is yielded. Also shouldYieldFocus() is only invoked once. It is when the data is high and the showConfirmDialog() is put up that I get the second shouldYieldFocus() invocation. The previous coder put in a de-bouncing mechanism and I think this is where/how the problems with the next field are created. Sometimes the next field's focusLost() is invoked without the operator making any input. The focusLost() does some fill in the blank things that are reasonable only if the operator really wanted not to fill in any data in the field.
    Back to my original point, I was wondering if the fact that the verify() method may have a dialog box put up before it returns to shouldYieldFocus() is the kind of thing that shouldn't be done - no side effects. If so then it could be the likely cause of the problem with the next field sometimes being automatically filled in as if it had received a focusLost() event.
    tuckie

  • JavaDocError: Utility classes should not have a public or default construct

    Hello all,
    I am trying to comply with some check style errors that i am getting and i cannot seem to figure out what is going on. I have set all non-data members to private, except for call point public static void main(string[] args) and i am still getting this error. "Utility classes should not have a public or default constructor." I cannot figure out what is going on, any help would be greatly welcomed. My code is posted below.
    public final class Main
         * Constant Data Member: RECTANGLE
         * Purpose: contains the constant string representing a rectangle.
         * @deprecated RECTANGLE Representitive string value for a rectangle.
        public static final String RECTANGLE = "rectangle";
         * Constant Data Member: TRIANGLE
         * Purpose: contains the constant string representing a triangle.
         * @deprecated TRIANGLE Representitive string value for a triangle.
        public static final String TRIANGLE = "triangle";
         * Constant Data Member: REGEX_NUMBER_TEST
         * Purpose: contains the constant for numerical test within regex method.
         * @deprecated REGEX_NUMBER_TEST regex string for digit comparison.
        public static final String REGEX_NUMBER_TEST = "^[0-9]+$";
         * Constant Data Member: MAX_ARGUMENTS_RECTANGLE
         * Purpose: contains the constant for the maximum number of allowed
         *          arguments coming in from the command line.
         * @deprecated MAX_ARGUMENTS_RECTANGLE constant for rectangle argument.
         *                                      limit.
        public static final int MAX_ARGUMENTS_RECTANGLE = 3;
         * Constant Data Member: MAX_ARGUMENTS_TRIANGLE
         * Purpose: contains the constant for the maximum number of allowed
         *          arguments coming in from the command line, in the case of a
         *          triangle object.
         * @deprecated MAX_ARGUMENTS_TRIANGLE constant for triangle argument limit.
        public static final int MAX_ARGUMENTS_TRIANGLE = 2;
         * Method: main
         * Purpose: Is the execution point for the program. It is in charge of
         *          initiating validation and the creation and application of
         *          objects and their related draw methods.
         * @param args input from the user.
        public static void main(final String[] args)
            String objectType = null;
            int width = 0;
            int height = 0;
            if(args.length > MAX_ARGUMENTS_RECTANGLE || args.length <
                MAX_ARGUMENTS_TRIANGLE || (args.length == MAX_ARGUMENTS_TRIANGLE &&
                !isTriangle(args[0])))
                 // fails
                outputErrorMessage();
            else
                if ((isTriangle(args[0]) && args.length > MAX_ARGUMENTS_TRIANGLE) ||
                    (!isTriangle(args[0]) && args.length > MAX_ARGUMENTS_RECTANGLE))
                    // fails becuase triangle should only have one argument
                    outputErrorMessage();
                else
                    // passes and proceed
                    objectType = args[0];
                    if (validNumber(args[1]))
                        width = Integer.parseInt(args[1]);
                        if(width == 0)
                            outputErrorMessage();
                        else
    ....

    Add a private constructor.
    private Main() {  }
    ...This way it will be not possible to create an instance because it is not needed to use its static members or methods.
    ref : [http://www.javapractices.com/topic/TopicAction.do?Id=40]
    Bye.

  • 1st - itunes downloaded to my ipod albums that are all fractured, compilation albums are seperated.This should not have happened but itunes felt it knew better. I do not like it.

    1st - itunes downloaded to my ipod albums that are all fractured, compilation albums are seperated.This should not have happened but itunes felt it knew better. I do not like it.
    2nd - While trying to fix it, itunes made all albums and artists unknown
    3rd - While trying to get an answer I am unable to contact anyone or even send an email requesting an answer.
    4th - While trying to use the "fast lane" i ran into trying to find the product S/N, I went to my account and it was not there. I tried to see it on the back of the Ipod but had to find a magnifying glass to even read it.
    5th  -- The we will get back to you really ****** me off
    6th  -- I have wasted 2 hours to fix something that should not have happened and the situation is worse than when i started
    7Th  --- Itunes management of songs is terrible and there are NO instructions and even worse no support
    8th  ----  Apple is going down the toilet because the products are good, not great, and the itunes instructions are non existent
    9th  --- to even suggest i pay for product support is insulting and a sign that apple is desperate
    10th -The suggestion for online feedback is this; BE ON-LINE SUPPORT, NOT WHATEVER YOU CONSIDER IT TO BE NOW.

    I agree with stevejobsfan - (0123).
    However, if what you actually want to do is to fix/sort out your problem, why no try posting a question on that subject?
    For starters - you can re-name the tracks in your iTunes library, so it is possible to correct the changes that you must have made that mean that songs are now "unknown artists and albums."

  • I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    Welcome to Apple Support Communities
    Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

Maybe you are looking for

  • Can use the internet but only one computer at a time...

    I have a very old PC with no ethernet ports and i have one macbook pro. I just bought an airport base station and have connected it to my modem via an ethernet cable, and the modem is then connected to my PC via USB. This set up allows me to connect

  • IPhoto keeps eating my pictures

    iPhoto keeps eating my pictures!!! It ate one event last week for which I had to buy a new data recovery program to get my pictures back and it's Monday afternoon, and between Saturday and today it has devoured SEVEN events. All that remains is a gre

  • HT204088 print all purchase history. How can I do this?

    I need print all purchase history of itunes, with the date, description and value of each purchase. How can I do this?? I can see in my account/history purchase/see all .... but first I can not to see the complete value, this is clipped; second here

  • Flash player says its installed, but isn't

    I have installed flash player, get to box saying it was sucessful but it doesn't work..It doesn't show up under my programs, but does show up in my uninstall group.  I have tried many different ways suggested by the help page.  Have Norton anti virus

  • Placing a symbol with an action

    I have an action that places a symbol on my page, however for the action to work I need to have clicked on the symbol in my symbol pallet. Is there a way that I can have the action place the symbol without have to have it clicked on in the symbol pal