[svn] 3090: get the Mac DMG web installer up-to-date to player 10.0.0.591

Revision: 3090
Author: [email protected]
Date: 2008-09-04 07:22:28 -0700 (Thu, 04 Sep 2008)
Log Message:
get the Mac DMG web installer up-to-date to player 10.0.0.591
Modified Paths:
flex/sdk/trunk/in/player/10/mac/Install Flash Player 10 UB.dmg

Hi, I appreciate your comments. Since I don't use Mac it's not as easy for me to know exactly where Flash Player files are, etc. as I do with the PC.
There is also a difference of opinion among Mac users regarding the need to Uninstall the current version of Flash Player before Installing the new version. The instructions from Adobe are to use the Uninstaller first. Any update of Flash Player is a new version, not an addon to the current version.
The Uninstaller from my understanding is also changed when a new Flash Player version is released. I don't know if you Uninstalled the 10.1 prior to trying to Install the 10.2, but this may have had something to do with the problem. Then also, the Shockwave Flash plugin for Safari may have been disabled.
Several things to check when a new Flash Player is released.
Thanks,
eidnolb

Similar Messages

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks

Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?

Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion

NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy

Is there any possible ways to get the MAC address?

Hi guys:
I am writing servlets on the server side. Is there any possible ways to get the MAC address when a HTTP request come in? Thank you very much for any helps.
all the best!

It is usually impossible to get the MAC address of the maker of a HTTP request in any programming language or system.
At best, you can get the MAC of the closest intervening router, firewall, whatever.
Are you sure you mean the MAC address? MAC looks like this: 8:ab:f0:0:71:bb:90 (Ethernet), or 01-23-45-67-89-ab (Token Ring), etc, depending on your network type.
In contrast, an IP address looks like this: 209.249.116.195. If you want the IP address, check out the javadoc for HttpServletRequest and ServletRequest. Caveat: load balancers, web caches, proxy servers, etc will mask the "true" peer's address. Don't do anything silly like try to use the IP address for security or authentication.

I have os 10.6.5, but can't get the mac app store

I would like to access the App Store, and even though I have version 10.6 as stated in the requirements, I don't have it on my computer nor can I run software update to get it as the App Store page suggests. My "About This Mac" window says I'm running 10.6.5, but the "Software Update" button is grayed out and when I hover over it says, "This button is disabled because there is no Software Update application."
Seems to me I'm stuck, as I can't run software update to get the mac app store.
Am I missing something simple?

If the Software Update application is not in your Applications folder, then apparently you've inadvertently done away with it. Downloading and installing the standalone Combo Update, as the previous poster has suggested, may install a new copy of it. If it doesn't, you can reinstall it from your original OS installer DVD using Pacifist:
http://www.charlessoft.com/

How can i get the MAC of the users from my router?

Hi I need to get the MAC of the users from my router, but without go its web page. I have to make a program to get that list since a computer desktop wich will be periodically sensing my router. I appreciate your help thanks.

Have you tried psexec? it's a command prompt utility that executes program on the remote computer.
For example: PC1 (192.168.1.2) to PC2 (192.168.1.3)
In the command prompt window on PC1, type psexec \\192.168.1.3 ipconfig /all
Then get the MAC address

My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

FYI Mac OS X is not designed to be installed on additional Macs, unless you purchased it from the App Store, in which case you can make as many copies as you wish and install it on as many Macs as you own.
From the Recovery Disk Assistant -
Notes
If the computer shipped with OS X Lion or Mountain Lion, the external recovery drive may only be used with the system that created it.
If the system was upgraded to Lion or Mountain Lion purchased from the App Store, the external recovery drive can be used with other similarly-upgraded systems.

How can I get the MAC address of my Apple TV?

How can I get the MAC address of my Apple TV? I currently do not have an HDMI device to connect it to, and the MAC is not listed on the box or the Apple TV itself.
(to answer the obvious, I am trying to pair it with an iPad, and I need to register the Apple TV for the network so the two can see each other)

As long as I know java doesn't have support to work on link-layer, only internet and transport layers. You may write simple native code. On windows, IP Helper functions, like SendARP allow you to pass an IP address and get the hardware address. You store the hardware address on your database/file and later, when that machine is off, you send a frame to the address you stored previous.
[http://msdn.microsoft.com/en-us/library/aa366071(VS.85).aspx]
I haven't seen it on Linux, but if you need help let me know I'll check the Linux API's too.

Mac won't start following change of permissions. I have started In recovery and run repair disk and reset permissions to all disks inc backups. What do I do now to get the mac up and running without loosing thousands of pics and all other data? I

The problems occurred after photoshop elements said I did not have the necessary permissions to save changes to a photo. I then allowed all to permissions to all disks, I have three external hard drives but I cannot restore from any as they all appear to have some kind of problem. I have repaired all disks in recovery mode and verified all inc mac hd. All permissions are repaired and all disks are saying repaired. So where do I go from here to get the mac back on running mavericks without loosing thousands of photos and all other data ?
Do I need to reinstall Mac OS ?
The only options I get to reinstall is mountain lion?.. I have been running the latest mavericks .?.
Do I reinstall and then update?
The external drives are not smart drives so how do I ensure I retain all my files?

your best option is to connect an external drive and reinstall OS X on that external to run the system from. then copy all your files over to the new install for safe keeping. then try doing a reinstall of Mavericks over the top of the current install on the internal drive and test.

I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help

ChuckPhilyaw wrote:
I have a MacBook with OS X 10.5.8 ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

How to get the MAC address of the additional 10G NIC with ILO command line

how to get the MAC address of the additional 10G NIC with ILO command line?
thanks.
This question was solved.
View Solution.

Hi Bruce,
Out from what I can find on this network card is it not possible to get the mac address without a OS. I would recommend you to get/burn a Linux/Ubuntu live CD/DVD and run a Ifconfig in there.
Hope it helps you.
Best regards
Zincas
I work on behalf of HP

Can I get the Mac address in Audit logs of Active directory server for the user's machine which connect to the network/Domain

Hello All,
I am trying to get the information of all the user's who connect to our Domain network by signing in using the domain account. For this I am using the Windows audit group policies ( I am not sure of there is any other way). I can see when the user tries
to login to the network there is a audit event created on the AD/DC server. I can see the Kerberos authentication and logon/logoff events in the audit events under event viewer.
However the info which is being populated in these events include :- Hostname, IP address, Username and so on... But I can't see the MAC address of the user machine/system. Is there any way I can
get the Mac address of the endpoint system as its one of the important criteria for our project.
Any inputs on this would be appreciated, incase if there is any other way other than group policies please suggest.
Thanks,
Kavish

> include :- Hostname, IP address, Username and so on... But I can't see
> the MAC address of the user machine/system. Is there any way I can get
> the Mac address of the endpoint system as its one of the important
> criteria for our project.
If you use DHCP, you can query the DHCP server. There's no builtin
method to get the MAC address directly.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to get the MAC address of a PXI in a dll

Hi,
I am looking for a way to get the MAC address of a PXI RT controller. I know that there is a VI to do this, but I am looking for a solution for a dll (C-Code).
I use the "Call library node" to call this dll and want to make sure that it is only used on a specific PXI.
Since the VI provides the functionality, I am wondering if it is also available to be called from C-Code?
Thank you,
Christian
Solved!
Go to Solution.

ChristianEC wrote:
Hi,
I am looking for a way to get the MAC address of a PXI RT controller. I know that there is a VI to do this, but I am looking for a solution for a dll (C-Code).
I use the "Call library node" to call this dll and want to make sure that it is only used on a specific PXI.
Since the VI provides the functionality, I am wondering if it is also available to be called from C-Code?
Thank you,
Christian
If it is available in LabVIEW it is probably available in CVI, which you could then build into a DLL (if there isn't one available already).
CLA, LabVIEW Versions 2010-2013

How to get the MAC address of other hosts in local net

1. Is there any kerner or user function to get the MAC address of other hosts in local net?
2. ire_route_lookup() can only lookup MAC in routing table(arp -a),Is there any way to enable it to find out all MAC of hosts in the local net?
Best Regards
Hann

ChristianEC wrote:
Hi,
I am looking for a way to get the MAC address of a PXI RT controller. I know that there is a VI to do this, but I am looking for a solution for a dll (C-Code).
I use the "Call library node" to call this dll and want to make sure that it is only used on a specific PXI.
Since the VI provides the functionality, I am wondering if it is also available to be called from C-Code?
Thank you,
Christian
If it is available in LabVIEW it is probably available in CVI, which you could then build into a DLL (if there isn't one available already).
CLA, LabVIEW Versions 2010-2013

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection

-1007f cannot get the Mac book air to reinstall, no drive. For disk and no connection please help!!

You can download the product from this link:
<Download Photoshop Elements products | 13, 12, 11, 10>
Your redemption code/Serial number will work with these downloaded products.
Make sure you download the correct version for your operating system - Windows or Apple MAC
Good luck.

[svn] 3090: get the Mac DMG web installer up-to-date to player 10.0.0.591

Similar Messages

Maybe you are looking for