[svn] 3397: Re-add a new internal method to MessageBroker that went missing post-merge .

Revision: 3397
Author: [email protected]
Date: 2008-09-28 22:33:49 -0700 (Sun, 28 Sep 2008)
Log Message:
Re-add a new internal method to MessageBroker that went missing post-merge.
QA: No
Doc: No
Checkintests: Pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java

You would really have to ask the app developer if there is a way to export the data.
As for adding a printer, you would need to purchase an AirPrint compatible printer and connect it to your wireless network.
By the way, your holiday letter/rant/Idon't even know what to call it... is completely inappropriate for these forums.

Similar Messages

  • I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

    I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
    I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
    I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks. 

    Hi,
    I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
    from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
    2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
    on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
     the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files  on visual studio 2010 so that the new report will show in the application. What's your opinion
    ? I have attached 2 images of the application and team foundation server 2010 and the report server.
    Thanks. 

  • [svn:fx-trunk] 13453: Updating mergeinfo with 3. x revs that have already been merged.

    Revision: 13453
    Revision: 13453
    Author:   [email protected]
    Date:     2010-01-12 10:47:04 -0800 (Tue, 12 Jan 2010)
    Log Message:
    Updating mergeinfo with 3.x revs that have already been merged.  This is for svn merge tracking purposes only
    QE notes: no
    Doc notes: no
    Bugs: no
    Reviewer: no
    Tests run: no
    Is noteworthy for integration: no
    Property Changed:
        flex/sdk/trunk/

    T61-Elwood wrote:
    Laptops of all Brands using Nvidia GPUsmade  from 2007-2008  are faulty.
    You wont get good Nvidia ones on Ebay/forumes anywhere.
    I'd beg to differ on both accounts.
    *61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
    As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Add a new International keyboard in ios

    I'm new to IOS development,
    I need a help to develop an International Keyboard for IOS,
    so once user install my application i need to give him the keyboard which he can add to his default keyboard in by Following the path, Settings→General→International→Keyboards→Add New Keyboard.
    Thanks...

    Dear,
    Rouetf.
    You can not maintain accounts manually in OAMK. The accounts which we maintained at the time of assignment for selected  account determination for classes in AO90 are only displayed in OAMK. Additionally here you can you change only their Reconciliation Type for direct postings. When you change the Reconciliation Type you are able to make direct postings to changed accounts. For direct postings make blank and SAVE.
    But changing the Reconciliation type in live system is not recommended.
    Hope this helps you to understand and clears your doubt.
    Please revert for further clarification.
    Regards,
    Pankaj Bhalerao.
    Edited by: pankaj_ab on Jan 4, 2010 2:02 PM

  • Can't add a new internal HD in my G4 MDD

    jimcourtri posted a thread last week regarding this same issue. From everything I've read, the MDD can accommodate larger drive sizes. However, I bought a Western Digital 160gb drive and I'm having the same problem jimcourtri had where the disc won't mount. This is a third drive to accompany two Seagate 80gb's that are already in it. I've tried every jumper setting available and installed it in both front and back slots. Can anyone help?

    Have you let Disk Utility look for the disc? A new disk is not formatted and cannot "mount" (show up on the desktop) until DU formats it/ DU has "special powers" to detect unformatted disks theat the Desktop lacks. DU is located in Applications > Utilities.
    I have two 250GB Western Digital Caviars in my MDD and they have been excellent. BTWM"cable select" is teh only setting that you should be using on the MDD.

  • How to add a new field in target ODS that is not available in source ODS ?

    Hello every one , this is the first time i am placing a question
    - Currently we have an existing ODS based on 2LIS_02_SCL data source. This ODS is already in production.
    We have a requirement to use this existing ODS as our source to load required data in to two different data targets which also are ODS.Their update rules are different.
    Problem: There is  now a requirement to include a new field (PO need date) in the two target ODS. As this field in not available in our source ODS . How do we go about adding this.
    concern: As the source ODS is already in Production, How do we go about loading data if this new field is added.
    Anticipating your co operation.

    The new field is 0SCL_DELDATE  (planned delivery date of document schedule line)
    It is already there in the comm structure of our source ODS. But as it was not needed earlier in the source ODS, it was not used/added.(i.e not there is the source ODS update rules)
    But now as we are basing our targets on this source ODS.
    How do i go about doing this.
    The main idea of doing it this way is because we do not want to reload data from R/3.

  • Can not add a new event with attachments, for that is not ... add file attachaments

    file://localhost/Users/bogdan/Desktop/Screen%20Shot%202012-01-28%20at%2008.59.06 .png

    Hi Cmrl,
    Does it happen when you create an appointment via OWA?
    Does it happen when you create an appointment via Outlook 2003?
    Do you have any mobile device?
    How many users encountered the issue, all users or some user?
    At first, I suggest you recreate outlook profile.
    At second, 
    use PFDAVAdmin
    to correct any problems found.

  • How to add new payment methods to an existing EDI interface to bank

    Hello:
              <b>Requirment:</b> Need to add  two new payment methods to an existing EDI interface to bank. As of now only USD EFT's are sent. With the new set up we need to be able to send CAD and USD checks and CAD EFT's to that particualr bank.
    <b>Scenario:</b> The payment methods are all set up in the payment program. I need two separate variants on the program RFF0EDI1 thats triggers the EDI file. The trigger of the EDI after the payment run should have a different variant... but the message type ought to be the same.
    Can some one please exlpain how I should go about setting this up. Thank you.

    I figured out the way to do it myself, after poking around the system for hours together.
    All I need to do was to make config changes in FI12- define the posting rules and the bank accounts the checks needs to be drawn against. Also adding the payment method "C" in the DME section of the FI12. Next check and see if the Idoc message types have been set to what was required by clicking on "EDI partner  profile in the DME section.  Also to have different varaints for the program RFF0EDI1  , I just had to goto SE38 select the program and create the new variant. For enabling EDI I had to do some config changes in FBZP- MAINTAIN PAYMENT PROGRAM CONFIGURATION: PAYMENT METHODS in country, Delete the entry made in the "Name of print data set" in the form print section and enter "RFF0EDI" under "Name of the print program" in the form data section. If anybody needs any other information , please let me know. Thanks everyone.

  • OS 10.3.9 and adding a new internal drive

    Hi -
    I have a G5 1.8ghz Dual with the original 80gig hard drive.
    I would like to add a new internal drive. After reading post I like the WD SE16 500 GB sata drive.
    Do I have to upgrade to OS 10.4? I know I should but do I have to do this first. Also can I boot off the WD Drive.

    Great drive. No OS limitation. It does work. There was one 400GB model a year or two ago that would not work in early G5s. The 500GB model is fine.
    Check out http://www.xlr8yourmac.com
    OWC also has Maxtor 300GB MaxLine III $73 if you want a couple smaller and less expensive.
    I think 10.4.9 is nice and good time to upgrade.

  • How to add a new dimension in ASO cube without losing all data

    Hi,
    I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of the fact if I have a level0 export or not. Because when I tried to reload the export back into the cube it gave me an error cause all the dimensions were not present in the export. Does anyone know how would I be able to accomplish this task?
    Thanks
    fikes

    You can try this work around solution.
    1) Export Lev0 data
    2) Clear the cube
    3) Add new dimension Regular.
    4) Add a default member Reg00 in the new dimension and save.
    5) Open the Lev0 data in a text editor, Insert "Reg00" in the begining of the file and Enter.
    6) Lev0 file will have first record "Reg00" and the remaining export file will be from the second record.
    7) Load the modified file with out rule file.
    You can verify that all your history data will be loaded w.r.to the Reg00 of the New dimension Regular.

  • Add a new attribute to a user

    I would like to add a new att to an user, that is i would like to have more atts in a user, but these atts aren�t in the inetusergroup, so do you know how to add more attributes to an user? I would like to add for example the att yuuuuuuu but i can add it,. I must create a class that descend for inetgroupuser and add the att, that is easy but the problem is how i do to recognize that for identity server at the time of register.

    The best approch to add new set of attributes are define a custom object class which is extended from the inetorggroup. Add that class in to the Directory Server instance.
    After that the custom object class and it's naming attribute and other attributes you update in the ums.xml.
    Once updatation is done, drop the DAI Sevcie and load it again to make these changes effective.

  • Importing FROM external hard drive to new internal hard drive

    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?

    lksj wrote:
    How can I move my backed up Itunes library from my external hard drive to my new internal hard drive? I went through the steps listed on the support page, and imported the .xml playlist that I moved to the desktop. Now all my playlists (names only) are on Itunes, but there is no content. Help?
    assuming you moved the whole iTunes folder to your new internal HD, try this:
    launch iTunes with the options key pressed. this window will appear
    click +choose library+ and navigate to the _iTunes library file_ on your internal HD.
    any luck ?

  • Need to add a new segment on a live ASA5520 with a failover setup running

    Hi ,
    how do I add a new segment on my ASA5520 that is currently on a lan based active/standby failover. ?
    Will it trigger the failover if I add another interface and will be just as simple as unshutting a normal interface and adding an IP with the same configuration as the other interfaces for failover .
    all of my existing segment has a redundant switch and for the new segment that I will be creating is just a straight forward with only 1 switch on the segment.
    fw-inside-1# show run int
    interface GigabitEthernet0/0
    description OUTSIDE Interface_1
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/1
    description APPS Interface_1
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/2
    description DB Interface_1
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet0/3
    description LAN/STATE Failover Interface
    interface Management0/0
    shutdown
    nameif management
    security-level 100
    no ip address
    management-only
    interface GigabitEthernet1/0
    description OUTSIDE Interface_2
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet1/1
    description APPS Interface_2
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet1/2
    description DB Interface_2
    no nameif
    no security-level
    no ip address
    interface GigabitEthernet1/3           <<<<<<<<<<<<<<<<<< I will use this interface for the new segment.
    shutdown
    no nameif
    no security-level
    no ip address
    interface Redundant1
    member-interface GigabitEthernet0/0
    member-interface GigabitEthernet1/0
    nameif outside
    security-level 0
    ip address 10.50.5.10 255.255.255.0 standby 10.50.5.11
    interface Redundant2
    member-interface GigabitEthernet0/1
    member-interface GigabitEthernet1/1
    nameif apps
    security-level 80
    ip address 172.16.1.1 255.255.255.0 standby 172.16.1.2
    interface Redundant3
    member-interface GigabitEthernet0/2
    member-interface GigabitEthernet1/2
    nameif db
    security-level 90
    ip address 172.16.4.1 255.255.255.0 standby 172.16.4.2
    fw-inside-1#
    fw-inside-1# show run fail
    failover
    failover lan unit primary
    failover lan interface Failover GigabitEthernet0/3
    failover polltime unit 5 holdtime 15
    failover link Failover GigabitEthernet0/3
    failover interface ip Failover 10.0.0.1 255.255.255.252
    fw-inside-1#
    Since I will not be having a redundant switch on the new segment I will use the below config
    interface GigabitEthernet1/3    
      no shut
      nameif
      security-level 75
      ip address 172.16.3.1 255.255.255.0 standby 172.16.3.2
    Then I will connect cables..
    Please let me know if you have any suggestions or links.
    Regards

    You should first configure your interface, then cable both units and after that no shut it on the ASA. Additionally you can remove your new interface from failover-monitoring as a precaution if somerhing goes wrong.
    Sent from Cisco Technical Support iPad App

  • I am new in DART extract and  wanted add the new field in Existing Segement

    Hi ALL
    I am new in DART extract and client is request us to add the new field in Existing Segment.
    What is proceedure i need to follow to add the new field in existing segment.
    Moderator: Please, post in proper forum

    I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server.   In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4".  If I run this from any browser it works.  So what do you think I have done wrong?

  • [svn:fx-3.x] 7499: Addendum to fix for BLZ-233 - adjust visibility of new internal heartbeat util methods to protected from private .

    Revision: 7499
    Author:   [email protected]
    Date:     2009-06-02 16:10:08 -0700 (Tue, 02 Jun 2009)
    Log Message:
    Addendum to fix for BLZ-233 - adjust visibility of new internal heartbeat util methods to protected from private.
    QA: No
    Doc: No
    Checkintests Pass: Yes
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-233
    Modified Paths:
        flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    inspired2apathy wrote:
    ... The goal is a ScrollPane that automatically wraps the text inside it. I've just about got it, but I have one thing that's not working. If I just put the JTextArea{s} in as the Editor, then you lose the any text that doesn't fit inside whatever the initial size was. Instead, I put the JTextAreas inside a JScrollPane which works fine, except that I still have to determine the size of the JScrollPane in advance. I would like to make each Editor/JScrollPane start out with just a single line of text and expand until it reaches a certain small number of lines.
    ... What am I missing?THE BASICS. See if this isn't what you are trying to do.
    import javax.swing.JFrame;
    import javax.swing.JScrollPane;
    import javax.swing.JTextArea;
    public class Test
      public static void main(String[] args) {
        JTextArea ta = new JTextArea();
        ta.setLineWrap(true);
        ta.setWrapStyleWord(true);
        JScrollPane sp = new JScrollPane(ta);
        JFrame f = new JFrame();
        f.getContentPane().add(sp, "Center");
        f.setBounds(0, 0, 400, 300);
        f.setDefaultCloseOperation(f.EXIT_ON_CLOSE);
        f.setVisible(true); 
    }OP, your code was too long and complicated for me to compile and run. However, aren't you forgetting the two simple methods <tt>JTextArea.setLineWrap()</tt> and <tt>JTextArea.setWrapStyleWord()</tt>? Furthermore, I absolutely see no need for you to extend SWING components for demonstration this simple -- that is, if I understand your problem correctly.

Maybe you are looking for