[SVN] checking out takes ages..

Hello all,
Do you have the same problem with it? Arch seems to be the only distro I have this problem on. Checking out repositories just takes several minutes. Downloading the files is just as fast as it should be. It's just the initializing part. Maybe svn has too many unneeded dependencies?
Thanks in advance,
--Ronny

svn works fine for me. Perhaps you should mess with some 'verbose' flags or something and try to figure out exactly where the bottleneck is.
DeliQ wrote:Maybe svn has too many unneeded dependencies?
depends=('neon>=0.25.5-4' 'apr-util>=1.2.7-2')

Similar Messages

Why am I unable to post comments from FF. I can do it from IE, but it takes ages. Virus etc. checked.

Two problems:
1. I am unable to post comments from FF, but I can do it from IE,
though it takes ages with IE. Checked for Virus etc. with McAfee,
ZoneAlarm and Spybot. FF versions 4 later changed to 12. Both
do not allow - just keeps waiting (tried up to about 1 hour). It
started about a month ago.
2. I am unable to attach .pdf files from FF in Yahoo Mail. It works
from IE - though it takes ages (script?).
I am using 'NO Script' from FF - but for most cases I have to
go to 'partially allowed' mode.
Thanks
SB

(1) As instructed I went to 'run' and typed in the code. It took me to 'xuowtwd1.default' folder under 'Profiles'. There were several files stored there and
I did not know what to do. Next...
(2). As suggested I went to 'troubleshooting Information' under 'Help' drop down list.
(3). Followed instructions, but could not find the 'Reset Profile' button.
(4). It said the instructions were not for my version (V12) of FF.
(5). Downloaded V. 14.0.1
(6). Will not install. As mentioned earlier I am using Windows 2000 (p.s.initial
complaint)

Can I take my iphone to the store to have it checked out although the contract is not under my name?

Can I take my iphone to the store to have it checked out although the contract is not under my name?

Yes. Make appointment with Genius to avoid possible long wait. Also any Warranty or AppleCare coverage is attached to the iPhone, so just bring the phone for evaluation.

Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

Hi!
I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
Regarding reseting the device, already done. It did not helped.
Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester.

Can I get my Macbook Pro just checked out and tuned up at the genius bar?

I'm having a hard time getting my questions answered. Basically I've had my Macbook Pro for four and a half years, but it's still doing mostly fine. It's just showing it's age slightly I think, with more spinning wheels than usual and odd things like the date is usually set to 1999 when I turn the computer on, but it rights itself in a few minutes. Also most the time when I plug it in it says it's not charging and I have to try multiple times. None of this is a huge deal, it's just that I really need the computer to last me preferably at least another year, so I worry about it a bit. I do take good care of it though. I'm about to move out of the country for a year, so I'd like to get it just checked out and perhaps tuned up a bit so that any problems are taken care of and it's in the best shape before I move away. I'd like to make a genius bar appointment, but the closest Apple store is a two hour drive from my home, so I don't want to go into it not having any idea how much it will cost or if they'll even be able to do what I'm hoping in the span of a single workday. I really don't want to have to drive back later to pick it up or have it sent off somewhere to be repaired, although if it does have serious problems I'd be willing to do that. I'd just like to know going in to it what the price range is likely to be like. I don't want to make the drive to the Apple store and have them tell me it's going to be a few hundred dollars just to have my computer looked over. And I don't even know if they offer that service, let alone if they can do it in a single afternoon. I've tried calling the store and conversations with the automated person really are not helpful. He just tells me to go online and make a reservation, and I can't figure out how to get my questions about cost and service answered.
Also, am I being foolish hoping my four and a half year old Macbook will last at least another year or two? I have no idea what the "life expectancy" is for these things. I know nothing really about computers at all, so forgive my ignorance.
Any help and insight is very much appreciated.

The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Connecting to the intrenet takes ages.....

I am using an MX100 and after about a year problems and nuisances are turning up more often. When I ask in other forums I sometimes get the answer, it might be the SSD.So I ask here too…. I use win 7 ulti with i5 and it took around 10 or 15 sec to start it all up. Now everything is still fast, except connecting to the internet. The blue circle keeps turning… the yellow triangle comes, followed by the red x… after a time of one to five minutes, suddenly it will connect. Anybody has an idea what it might be? Thanks, RD

I have to agree with squall, I found that hibernate story somewhere on the net, when I checked out the background on win 8, when it came out.Even if it would have been true, getting a start up time reduced from 12 to 6 sec would not have improved my life decisively. I do not use google, I use start-page, and I use a very, very old version of google earth. I do not update applications that do not need updating. I prefer the versions that were written in the good old days, when updates were not produced to sniff and make another little slice of money. And if there is one company other that google that I „trust“ with updates, especially when they come free of charge as Win 10 does, then it is microsoft. Just last night I almost updated Ccleaner and found it contains four additional software installs, incl Opera, plus the whole set-up of OpenCandy.You see, it is not that simple: „ It's not that hard to set the appropriate options during install though (and a few after) you just need to read what you're clicking before you click it.“There are NO places to be ticked for many of those, the ones that were there I did click.I use advanced uninstaller, which later shows me all the sh** that was installed as a by-product.It also shows me that after uninstalling almost all software using THEIR own uninstaller, there are almost always files intentionally left on my computer when I use the un-installer the company provides.F.e., uninstalling Opera left 233 files on the computer! Advanced Uninstaller removes those, very recommendable software. And as you probably have have already understood, we are only at the beginning of the age, when EVERY download will be loaded with lots of garbage forced on you. But, I still wish I could have somehow found out why the time my computer uses to connect to the network has become a joke. God bless M$ for „system restore“… I have moved most of my stuff to the HDD, and use the SSD mostly for programmes. That is about 40GB, and a clean install of Win 7, plus all the software, takes a couple of hours.I find that reasonable to have a nice clean computer every one or two years. Thank You all for your help, we may not solved my particular problem, I still learned something new. Is there a special recommended new software to wipe the SSD completely before a clean install?

Mb51 trx (movement type 101) - Doc info- FI Doçuments takes ages

Hello
We are experienceing performance problem when accessing FI document (FB03) from MM document.
in praxis this means when choosing an todays document in mb51 trx (movement type 101) ->Doc info->FI Doçuments
it takes ages to get FI document
Does anyone has idea how to make system faster in this regards
Thank you in advance

hi
check out this SAP Notes
555893 MB51: Preventing runtime error DBIF_RSQL_INVALID_RSQL 15.05.2008
848474 MB_GET_MM_MATBEL: Performance problem 21.08.2007
857311 MB_GET_MM_MATBEL: Performance problem / error
921164 MB51: Improving the runtime using database hints
1608810 MB51: Enhancements for multiple account assignment MAA2

FAST enabled MView takes ages to refresh

Hi All,
I have a materlialized view which is based on a single fact table ( OAS_BALANCE_UNIONED 11,445,156 rows) and a bunch of dimension tables each containing limited number of rows (a typical start schema).
The conditioins to make the mview fast refreshable have been met so the mview created successfully with the FAST option.
The mview then worked just fine after than and had been refreshing FAST (6 minutes) for the whole day till other mviews started to refresh in the same time. Some of those mviews read from some of the base tables of the mview in question. Since then, the mivew has started to take ages (3 hours) to refresh. There is surely something wrong because the COMPLETE refresh was faster than that.
Later, I stopped all the refresh jobs of the other mviews. Yet, the FAST mview still has the same problem of taking ages to refresh.
When I monitored the session that refreshes the mview, I noticed in the "Long Ops" that
most of the time is spent on a step named as "Hash Join" (it appears in the Message column). Hash join occurrs because of the outer join.
Why my FAST mview suddenly started to take so long time to refresh?
How can I make my FAST mivew really refresh fast?
Technical Details are below:
OS: Windows 2003 32-bit
DB version: Oracle 10g R1 ( 10.1.0.2.0 )
CREATE MATERIALIZED VIEW FACT_BAL_MV
BUILD DEFERRED
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
SELECT B.cmpcode BAL_KEY,
       B.CMPCODE,
       B.YR,
       B.PERIOD,
       B.BALCODE,
       B.CURCODE,
       B.REPBASIS,
       TO_NUMBER (B.YR || LPAD (B.PERIOD, 2, 0)) DIM_PERIOD_MV,
       D_CMP.DIM_KEY DIM_COMPANY,
       D_CUR.DIM_KEY DIM_CURRENCY,
       D_EL_1.DIM_KEY DIM_EL_1,
       D_EL_2.DIM_KEY DIM_EL_2,
       D_EL_3.DIM_KEY DIM_EL_3,
       D_EL_4.DIM_KEY DIM_EL_4,
       GRP_1_P_EL.DIM_KEY DIM_GRP_1_P_EL,
       D_GRP_1_B_EL.DIM_KEY DIM_GRP_1_B_EL,
       D_GRP_1_K_EL.DIM_KEY DIM_GRP_1_K_EL,
       D_GRP_2_D_EL.DIM_KEY DIM_GRP_2_D_EL,
       D_GRP_3_E_EL.DIM_KEY D_GRP_3_E_EL,
       B.ROWID X_OB_ROWID,
       D_CMP.ROWID X_CMP_ROWID,
       D_CUR.ROWID X_CUR_ROWID,
       D_EL_1.ROWID X_EL_1_ROWID,
       D_EL_2.ROWID X_EL_2_ROWID,
       D_EL_3.ROWID X_EL_3_ROWID,
       D_EL_4.ROWID X_EL_4_ROWID,
       GRP_1_P_EL.ROWID X_GRP_1_P_EL_ROWID,
       GRP_1_P.ROWID X_GRP_1_P_ROWID,
       D_GRP_1_B_EL.ROWID X_GRP_1_B_EL_ROWID,
       D_GRP_1_B.ROWID X_GRP_1_B_ROWID,
       D_GRP_1_K_EL.ROWID X_GRP_1_K_EL_ROWID,
       D_GRP_1_K.ROWID X_GRP_1_K_ROWID,
       D_GRP_2_D_EL.ROWID X_GRP_2_D_EL_ROWID,
       D_GRP_2_D.ROWID X_GRP_2_D_ROWID,
       D_GRP_3_E_EL.ROWID X_GRP_3_E_EL_ROWID,
       D_GRP_3_E.ROWID X_GRP_3_E_ROWID
FROM CLVE_STAGING.OAS_BALANCE_UNIONED B,
       FINANCE.DW_DIM_COMPANY D_CMP,
       FINANCE.DW_DIM_CURRENCY D_CUR,
       FINANCE.DW_DIM_EL_1 D_EL_1,
       FINANCE.DW_DIM_EL_2 D_EL_2,
       FINANCE.DW_DIM_EL_3 D_EL_3,
       FINANCE.DW_DIM_EL_4 D_EL_4,
       FINANCE.DW_DIM_GRP_1_P_EL GRP_1_P_EL,
       FINANCE.DW_DIM_GRP_1_P GRP_1_P,
       FINANCE.DW_DIM_GRP_1_B_EL D_GRP_1_B_EL,
       FINANCE.DW_DIM_GRP_1_B D_GRP_1_B,
       FINANCE.DW_DIM_GRP_1_K_EL D_GRP_1_K_EL,
       FINANCE.DW_DIM_GRP_1_K D_GRP_1_K,
       FINANCE.DW_DIM_GRP_2_D_EL D_GRP_2_D_EL,
       FINANCE.DW_DIM_GRP_2_D D_GRP_2_D,
       FINANCE.DW_DIM_GRP_3_E_EL D_GRP_3_E_EL,
       FINANCE.DW_DIM_GRP_3_E D_GRP_3_E
WHERE     B.CMPCODE = D_CMP.CODE
       AND (B.CMPCODE = D_CUR.CMPCODE(+) AND B.CURCODE = D_CUR.CODE(+))
       AND (B.CMPCODE = D_EL_1.CMPCODE(+) AND B.EL1 = D_EL_1.EL_CODE(+))
       AND (B.CMPCODE = D_EL_2.CMPCODE(+) AND B.EL2 = D_EL_2.EL_CODE(+))
       AND (B.CMPCODE = D_EL_3.CMPCODE(+) AND B.EL3 = D_EL_3.EL_CODE(+))
       AND (B.CMPCODE = D_EL_4.CMPCODE(+) AND B.EL3 = D_EL_4.EL_CODE(+))
       AND (GRP_1_P_EL.CMPCODE = GRP_1_P.CMPCODE(+)
            AND GRP_1_P_EL.GRP_CODE = GRP_1_P.GRP_CODE(+))
       AND (B.CMPCODE = GRP_1_P_EL.CMPCODE(+)
            AND B.EL1 = GRP_1_P_EL.EL_CODE(+))
       AND (D_GRP_1_B_EL.CMPCODE = D_GRP_1_B.CMPCODE(+)
            AND D_GRP_1_B_EL.GRP_CODE = D_GRP_1_B.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_1_B_EL.CMPCODE(+)
            AND B.EL1 = D_GRP_1_B_EL.EL_CODE(+))
       AND (D_GRP_1_K_EL.CMPCODE = D_GRP_1_K.CMPCODE(+)
            AND D_GRP_1_K_EL.GRP_CODE = D_GRP_1_K.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_1_K_EL.CMPCODE(+)
            AND B.EL1 = D_GRP_1_K_EL.EL_CODE(+))
       AND (D_GRP_2_D_EL.CMPCODE = D_GRP_2_D.CMPCODE(+)
            AND D_GRP_2_D_EL.GRP_CODE = D_GRP_2_D.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_2_D_EL.CMPCODE(+)
            AND B.EL2 = D_GRP_2_D_EL.EL_CODE(+))
       AND (D_GRP_3_E_EL.CMPCODE = D_GRP_3_E.CMPCODE(+)
            AND D_GRP_3_E_EL.GRP_CODE = D_GRP_3_E.GRP_CODE(+))
       AND (B.CMPCODE = D_GRP_3_E_EL.CMPCODE(+)
            AND B.EL3 = D_GRP_3_E_EL.EL_CODE(+));
CREATE INDEX FINANCE.DW_FACT_BAL_MV_INX
ON FACT_BAL_MV (X_OB_ROWID);
SQL> select count(X_OB_ROWID) from FACT_BAL_MV ;
COUNT(X_OB_ROWID)
         11444816
Elapsed: 00:00:27.85
SQL> select bytes/1024/1024/1024 GB from
user_segments where segment_name='FACT_BAL_MV';
        GB
4.4296875search id: redcorolla

Hard to say why the refresh is now slow. Possibilties include
* system resources implemented by the fast refresh
* something changed on the query making the background query run slowly
Look at the query first. 18 tables, with almost every join an outer join. Some of the tables appear more than once in the query.
Get an executioion plan to see how the query is being executed.

TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
Can you help please?

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

Setting up my Line6 UX1 with Audtion 3.0 on Win7 - settings dialog takes ages to respond

I downloaded the trial of Adobe Audition 3.0 (I've been using 1.5 on WinXP for a few years now and it's always been fine to use!)
I am trying to set up my Line6 POD Studio UX1 with Audtion 3.0 on Windows 7 Pro (64 Bit - 32GB RAM Quad Core Intel i7 3770 Processor)
I am noticing that the Settings dialog takes ages to respond and update with the changes I make - when I eventually managed to get playback - the playback only came out on the left monitor.
I should mention that I am doing this on a previous Audition 1.5 session - Audition 3.0 saved the session as a new session so I think that should be fine.
What I'm looking for here is the correct settings I need to use in Audition 3.0 to use my UX1.
I don't want to pay for Audition 3.0 if it's not going to work for me!

You won't be able to pay for Audition 3 since it was discontinued several years ago. However you may be able to upgrade to AA3 for free as a previous Audition user.
http://forums.adobe.com/thread/1129138?tstart=0

My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
Many thanks for reading my speal, I hope somebody can help

lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

Nokia N95 8GB takes ages refreshing even for one t...

Hi All.
I have had this REALLY frustrating problem...
Every time i add a track to my phone, then i refresh it takes AGES to update the library.
Does anyone know how to fix this?
Nokia N97 Mini
V: 10.0.020 : 14/10/09
RM-555
Old: N95 8GB : V 20.0.016 : 28/09/08 : RM-320

The reason it takes a while is that the phone has to scan all memory every time you refresh, doesn't matter whether you're adding/removing 1 track or 1,000 as the phone doesn't know what needs to be added without checking.
One of the downsides of having more space.
If you're deleting tracks from the library, you can still listen to other tracks while this is happening: I listen to a lot of podcasts and always delete the ones I've aleady listened to as I'm listening to a new one. Again, deleting 10 tracks together takes the same time as deleting one.
If you want to listen to a track you've just added, you can do this while the music player library refreshes, just start playing it using file manager then switch to the library to do the refresh.

Office 2013 vs SharePoint 2010 - Unable to check out documents to SharePoint drafts folder

My company is foisting Office 2013 on us without upgrading SharePoint 2010 Enterprise. One of the issues I have discovered since receiving Office 2013 is that SharePoint no longer provides the option to save checked out documents to my local drafts folder.
This is despite having Office set to save checked-out files to the server drafts location and the Office Document Cache Handler enabled in IE9. Is there a registry setting or something I can change that will re-enable this feature?

Hi Nellie,
According to your description, my understanding is that you want to re-enable the add-on Office Document Cache Handler in IE9.
We can re-enable the add-on in IE9 using Group Policy:
Launch the Group Policy Editor.
Go to User Configuration > Administrative Templates > Windows Components > Internet Explorer > Security Features > Add-on Management >
Add-on List.
Set this policy to 'Enabled'.
In the Add-on List, add the CLSID of BHO (Browser Helper Object) (i.e.) {B4F3A835-0E21-4959-BA22-42B3008E02FF} as the ‘Value Name’ and 1 as the 'Value'.
Log out of the machine and log back in again for the setting to take effect.
More references:
http://support.microsoft.com/kb/2463597/en-us
Best regards.
Thanks
Victoria Xia
TechNet Community Support

ITunes takes ages to load

When it finally does it takes ages to be able to select anything and when I plug in either my iPhone or iPad it freezes and has to be shut down throughout the control menu.
Everything else starts and play correctly on the laptop

Small update...
WHen Itunes did eventually load... a few odd things happened.
1. The icons on my toolbar flicked to white / blank and then came back
2. Windows Update sprang into life and asked me to install 1 important update
3. I got an error message
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
5. I clicked Yes...
6. It said it was checking my itunes library
7. I got a message The Bonjour service has been disabled. Bonjour is required to share music with others. Please re-enable the service to use this feature
8. This didn't seem to bad so clicked OK
9. BUt then Itunes disappeared again. It is still running in processes but isn't open.
Gah!!!!!!!!!!!!!!!!!

Unable to check-in & check-out

Hi,
I have subversion client 1.7 and OPA 10.2 installed on my system. The subversion has been detected automatically by OPM . Now the problem is that I have checked in a project into the repository. Now when I try to check out a file then the svn gives error that it was unable to lock the file. For some files I am successfully able to check out and check but for some files it says that it could not lock the file. what can be the issue with the svn?
also, note that I am the only user of that repository. so anyone else having that file check -out can be ruled out.
also. how can i version control the VTL files in release folder of the application.?
Thanks,
Rajan

Hi,
I have not been successful in using the SVN with OPA.
Following different error I am recieveing while using SVN with OPA.
1. When I try to check out project, I am getting error "Unable to lock project". Also, on status bar a message appears "Unable to add new visio document as project is write protected".
2. While gettitng the latest version I am getting error in a message box:
Get Latest Failed
update failed (svn: E155004: Working copy 'C:\OPA Projects' locked svn: E200031: attempt to write a readonly database svn: E200031: attempt to write a readonly database svn: run 'svn cleanup' to remove locks (type 'svn help cleanup' for details))
OK
Please not when using the same SVN respository in Eclipse IDE, all check-ins and check out works fine without giving any errrors.

[SVN] checking out takes ages..

Similar Messages

Maybe you are looking for