SVN over SSH won't interface with gnome-keyring

The title about says it all. I log into my box at home and try to pull down the latest revision from an SVN server and get the following message.
ATTENTION!  Your password for authentication realm:
   <https://*************> Subversion repository
can only be stored to disk unencrypted!  You are advised to configure
your system so that Subversion can store passwords encrypted, if
possible.  See the documentation for details.
You can avoid future appearances of this warning by setting the value
of the 'store-plaintext-passwords' option to either 'yes' or 'no' in
'/home/om/.subversion/servers'.
Is there anyway to have it store password encrypted? I found another topic which recommended running
export `gnome-keyring-daemon`
but that didn't solve the problem. In my subversion config I have specified gnome-keyring as a password store and it is installed on the system.

Will a simple reboot help? (But how, without ssh )
It might. You can issue a restart command through Server Monitor if you configured LOM properly, as I don't believe that it (Server Monitor) relies on ssh to issue commands.
-Doug

Similar Messages

  • [SOLVED] Chromium with Gnome Keyring as password store?

    Hi there.
    I'm trying to use gnome keyring as default password store for google chromium. I read all over the web about starting chromium using options '--password-store=detect' (to detect gnome evnironment) or even '--password-store=gnome' (force gnome). None of these options work for me, as I get the same result: chromium will store password in its own keyring.
    $ pacman -Q chromium gnome-keyring
    chromium 18.0.1025.162-1
    gnome-keyring 3.2.2-3
    Any idea how I can make it work as planned?
    Thanks in advance!
    Last edited by josephg (2012-06-12 17:56:48)

    sl1pkn07 wrote:makedepends=('python2' 'perl' 'gperf' 'yasm' 'mesa' 'libgnome-keyring'
    chromium use by default libgnome-keyring
    I don't think so, that's a makedepends; it means it's needed for building the package, not for using it.
    On my system (not running any desktop environment), I need to run chromium with --password-store=gnome for it to use the gnome keyring.

  • Having issues with gnome keyring

    So ever since I did a system update (-Syu) I have been having issues with my gnome keyring.
    Before I would use GDM and when I would go to type in my password the first time it would 'hang' and not respond, I would have to hit cancel and re-type in my password. If I would close my laptop lid and open it again, every time I would type in my password jt would just sit there and not respond and then I would have to reboot and go through the process again, first time doesn't work, second time it logs in, can't close laptop lid.
    So I go tired of dealing with that and got rid of GDM and just made a bash script to load X on login from tty1. This works great, just one minor annoyance. Once I log in I get this window http://imgur.com/Slj1V1d except when I try to type in the password, no matter how many tires I take, it still just hangs and sits there. I can hit cancel and go about my merry way, but its always on the back of my mind and its pretty irking. Something that I know is broken that I have to deal with everytime I use my computer can be bothersome.
    Would anyone know how I could either remove (from what I heard this wouldn't be good because gnome relies on the keyring for programs) the keyring, or delete the data with the keyring so that I could get a fresh start. I've tried seahorse, but it does the same thing as i've stated above.
    Thank you for any help!

    x33a wrote:
    @ clandest, using a live media + chroot, use
    # pacman -Qk
    to find out which packages have missing files, and reinstall those packages.
    Thank you x33a, this helped me get my system back up and running.
    Rexilion wrote:
    @x33a: I did not know that command. Maybe
    pacman -Qk | grep -v ' total files, 0 missing files$'
    will be more human parseable.
    Edit: Made sure it was formulated as a joke...
    And thanks to you too Rexilion, the grep made it easy to track what was missing to re-install.
    Even though I got my baby all patched up and working, I still have that damn pesky keyring issue with GDM. So even deleting every thing in that directory, and re-installing the packages, it didn't fix the issue

  • [solved] unison with gnome-keyring

    Hello everyone,
    does anybody know, if there is a way to use unison with the gnome-keyring?
    Thanks in advance!
    David
    Last edited by senior_spielbergo (2011-08-02 15:02:12)

    [solved] https://bbs.archlinux.org/viewtopic.php?id=123620

  • Freenx crash with gnome-keyring-daemon

    I have gnome 2.26 installed with nxserver 3.2.0-73  and nxnode 3.2.0-73 installed.
    When I log into the computer locally, everything works fine.
    Logging into gnome via nx, when the gnome-keyring-daemon is running, anytime after I open
    either gnome-appearance-properties, gnome-keyboard-properties or any of the other gnome programs,
    launching programs causes NX to terminate.
    With logging on, it just says nx session terminated.
    nothing showes up in the main message log.
    using "exec dbus-launch --exit-with-session /usr/bin/gnome-session" as my command.
    I have fonts installed and everything.
    Both XFCE and KDE 4.2 work fine in NX.
    I have all the font packages installed also.
    I have set up older versions of gnome with nx on other machines and never had this problem.
    Anyone have any ideas?

    I just also noticed that opening .jpg files crashes NX.

  • Adobe air won't interface with rosetta totale and mac 10.6.8

    I am having issues with adobe air. It just started about two weeks ago. I installed rosetta stone and can't get rosetta to run at all on my mac version 10.6.8. It says the adobe air is not a good file and to contact adminstrator. I have installed, uninstalled, reinstalled. I don't know what to do and I don't know some of the language on these boards (ie. this file says, blah, blah, blah) just tell me what I need to do please

    When you've reinstalled AIR (http://get.adobe.com/air) does the installer give you any errors or does it complete successfully?  Would you be willing to try installing another AIR application to verify that the AIR runtime is working properly?  If so, please download TweetDeck and double click the .air file to install.  Feel free to delete the application once you've verified that it installed and ran correctly at least once.
    Thanks,
    Chris

  • ASA Redundant interfaces with stack switches

    Hi All,
    we have two ASA 5510 connected in failover, and a pair of cisco 2960s switch connected in stack.
    Currently one interface of primary ASA is terminated on switch1 and a interface from standby is connected to switch2 as Inside, and switch1 and switch2 are in stack.
    for redundancy purpose i want to use multiple interfaces of ASA for inside , so first i thought to use etherchannel , but it has a limitation that , it cannot be terminated on stack switch(as per cisco document http://www.cisco.com/en/US/docs/security/asa/asa91/configuration/general/interface_start.html ).
    So my question is :
    1. can we use redundant interface feature where  2 physical interfaces combined to a redundant interface (eg interface redundant 1) for inside redundancy purpose.
    2. Can these ports from primary/standby ASA terminated on stack switches (2960s), will this work (if the switch with active port goes down, will the other port take over in the redundant interface with the other switch).
    I have attached the nw diagram,
    Regards,
    Ashraf

    Hello Ashraf,
    1. can we use redundant interface feature where  2 physical interfaces combined to a redundant interface (eg interface redundant 1) for inside redundancy purpose.
    Sure, you can. That's the whole purpose of the feature.
    2. Can these ports from primary/standby ASA terminated on stack switches (2960s), will this work (if the switch with active port goes down, will the other port take over in the redundant interface with the other switch).
    It would make sense if that happens, as the status of the interface will be on a different state than up/up so failover to the other interface will be triggered,
    Regards,
    Julio

  • [SOLVED] Subversion will not use gnome-keyring

    Hi,
    Anyone know how to use gnome-keyring with subversion?  When I run svn up, I get the following warning every time:
    ATTENTION! Your password for authentication realm:
    <https://123.456.789.012:443> Subversion Repository
    can only be stored to disk unencrypted! You are advised to configure
    your system so that Subversion can store passwords encrypted, if
    possible. See the documentation for details.
    You can avoid future appearances of this warning by setting the value
    of the 'store-plaintext-passwords' option to either 'yes' or 'no' in
    '/home/david/.subversion/servers'.
    Store password unencrypted (yes/no)?
    I googled a bit and found that you can use gnome-keyring to store passwords encrypted.  I tried setting "password-stores = gnome-keyring" in ~/.subversion/config, but this had no effect.
    I have the package 'extra/gnome-keyring' installed.  From what I can see Subversion is always compiled with gnome-keyring support.  I also tried starting the gnome-keyring-daemon, since it's not started by default (I don't use GNOME as my WM).  I started it from the command line using 'gnome-keyring-daemon' command.  But this had no effect - subversion acts like it doesn't know gnome-keyring even exists.
    Any idea?
    Cheers,
    David
    Last edited by david00 (2010-03-22 09:45:32)

    I had the same problem.
    When the daemon gets started it prints some environment variables with values to stdout. I think other programs like subversion read these to connect to the daemon.
    Starting the daemon like this:
    export `gnome-keyring-daemon`
    in your .xinitrc or at a comparable place should solve your problem.
    Of course, this only applies if you're not using the gnome desktop environment.

  • Gnome over SSH Painfully slow

    Hello all!
    Since recently upgrading to Tarantella 4, and have found that Gnome sessions
    over SSH to Redhat ES3 systems have become extremely slow. We can compare
    this performance change with Tarantella 3.42 because we have one of our
    original array members with exactly the same ens configuration as our new
    TTA4 array.
    Would someone mind helping me with this?
    Kind thanks in advance!
    Paul
    Our new environment:
    TTA Host:
    Redhat ES3 (kernel 2.4.21-20)
    Tarantella 4.00.903
    openssh-3.6.1p2-33.30.1
    openssh-askpass-3.6.1p2-33.30.1
    openssh-clients-3.6.1p2-33.30.1
    openssh-server-3.6.1p2-33.30.1
    openssh-askpass-gnome-3.6.1p2-33.30.1
    gnome-session-2.2.2-3
    *NIX app server:
    Redhat ES3 (kernel 2.4.21-27)
    openssh-3.6.1p2-33.30.1
    openssh-clients-3.6.1p2-33.30.1
    openssh-server-3.6.1p2-33.30.1
    openssh-askpass-3.6.1p2-33.30.1
    openssh-askpass-gnome-3.6.1p2-33.30.1
    gnome-session-2.2.2-3
    Client:
    TTA native client 3.42.903
    Our Old Environment:
    TTA Host:
    Redhat 7.3 (kernel 2.4.18-3)
    Tarantella 3.42.915
    openssh-3.1p1-3
    openssh-server-3.1p1-3
    kdessh-3.0.0-4
    openssh-askpass-3.1p1-3
    openssh-askpass-gnome-3.1p1-3
    openssh-clients-3.1p1-3
    gnome-core-1.4.0.4-54
    *NIX app server:
    Redhat ES3 (kernel 2.4.21-27)
    openssh-3.6.1p2-33.30.1
    openssh-clients-3.6.1p2-33.30.1
    openssh-server-3.6.1p2-33.30.1
    openssh-askpass-3.6.1p2-33.30.1
    openssh-askpass-gnome-3.6.1p2-33.30.1
    gnome-session-2.2.2-3
    Client:
    TTA native client 3.42.903

    Actually, this problem crashes the server.
    Can anyone help me with this? Have there been any changes to the way
    Tarantella connects to a XWindows server over SSH?
    Thanks
    Paul

  • I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

    I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

    Ignore.  I figured it out:)

  • Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

    I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
    So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
    Thanks.

    You mean updating a paid folio... don't know if that needs approving, too.
    Maybe someone else can chime in here (I have no exp in that)
    (mobil gesendet)
    Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
       Re: Does iTunes Connect Christmas break mean apps won't update with
    new folios over Christmas?  created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

  • My iPhone 4 has had a cover on it since the day I first had . But the back of the phone now has lots of little marks all over it . They don't feel like scratches since I can't feel them with finger or fingernail. They won't shift with alcohol or anything

    My iPhone 4 has had a cover on it since the day I first had it . But the back of the phone now has lots of little marks all over it . They don't feel like scratches since I can't feel them with finger or fingernail. They won't shift with alcohol or anything. I am guessing they have been caused by dirt between the cover and the rear of the phone; but that is despite me cleaning the back and the inside of the back cover regularly. Has anyone else had the same?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

    Outlook 365 retrieves same mail over & over  --  stops and restarts  -- won't sync to iPhone  -- won't work with blue tooth in car  'm using Win 8

    Hi,
    How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
    http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
    Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
    get the most qualified pool of respondents there:
    http://community.office365.com/en-us/forums/default.aspx
    If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
    Please let me know the result.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Just replace my HD, restored from backup but now my iPhone won't sync with iTunes over wifi

    Just replace my HD, restored from backup but now my iPhone won't sync with iTunes over wifi

    Is synching over wi-fi viable?  I've never done it, but when I tried something similar back in the old Palm PDA days, it was S-L-O-W, slow as molasses.  I realize that the i-device are far more modern with faster processors, but wondering whether it's even worth exploring doing this.

  • Issue with permissions when using SFTP (FTP over SSH)

    I have an issue when i use SFTP, for some reason users are able to browse the system's root directory and other user's directories. Also some users don't have access to the FTPRoot alias and some do. If i connect using FTP everything is fine. Can someone shed some light on this issue.
    Thanks,
    Toros

    There is absolutely no correlation between FTP and SFTP.
    SFTP is actually a file transfer run over SSH and therefore subject to the normal account/shell restrictions, just as if the user logged in via SSH.
    What you're confusing it with (easily done) is FTPS, which is SSL-encrypted FTP. This uses SSL/TLS to secure a FTP connection and is subject to the account restrictions defined in the FTP server, independent of the user's shell access.
    So, in other words, SFTP uses a SSH session to transfer files. FTPS uses SSL to secure a FTP session.
    There's no trivial way to prevent a SFTP user from walking through the directory tree since there's no difference between their SFTP session and an SSH session.

Maybe you are looking for

  • Caller-70 Error while loading master data into infoobject

    hi , I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings

  • Boot Failure iMac G3 400MHz, goes on firmware mode :S

    Hello everyone, I recently bought a second hand iMac G3, 400MHz processor and 128mb ram, 10gb harddrive. I've always wanted a Mac just for the fun of it, and i finally got it. I dont think this imac is dead, but i'm having trouble on boot. It is not

  • Transferring iMac G5 to new aluminum iMac

    i just bought a new iMac and used a firewire at the initial set up to transfer all the information from my last iMac G5 to my new iMac. It had iLife 06', and now I think that my new iMac that is supposed to have iLife 08' is running on the 06' stuff.

  • XSLT for converting the determination server xml into the debugger xml

    I've seen this before but i can't find the post. I'm looking for an xsl or xslt document to convert a determination server xml payload request into something that can be imported into the debugger for analysis. It would be cool if the xml was constra

  • Adding SWF for pdf interactive

    Hi, I have a multi page indesign doc which is set to export for interactive pdf. I need to add two swf file in different pages and once I add them, they do not show once interactive PDF is exported. I have tried many different options with no success