[svn:sb-natebeck] 7811: dropping current trunk setup in my sandbox for a re-sync
Revision: 7811
Author: [email protected]
Date: 2009-06-12 17:06:12 -0700 (Fri, 12 Jun 2009)
Log Message:
dropping current trunk setup in my sandbox for a re-sync
Removed Paths:
flex/sdk/sandbox/natebeck/trunk/
Revision: 7811
Author: [email protected]
Date: 2009-06-12 17:06:12 -0700 (Fri, 12 Jun 2009)
Log Message:
dropping current trunk setup in my sandbox for a re-sync
Removed Paths:
flex/sdk/sandbox/natebeck/trunk/
Similar Messages
-
[svn:sb-natebeck] 7812: copy the trunk to my sandbox dir
Revision: 7812
Author: [email protected]
Date: 2009-06-12 17:06:38 -0700 (Fri, 12 Jun 2009)
Log Message:
copy the trunk to my sandbox dir
Added Paths:
flex/sdk/sandbox/natebeck/trunk/thank you for that hint.
i THINK i found why it is thatway(just wana state here that i am still an absolute newb in making PKGBUILD's my own).
there are some entrys in the MakeFile that describe where to put what (afaik because of what i gave ./configure as parameters?)
everything except the DATADIR is set to ${prefix}/bla or ${exec_prefix}/bla.
but DATADIR needs an absolute path as target to install probably or it gets just ignored, so its, whatever i make either DATADIR=/usr/share/ufoai(where i trys to install it there instead of throwing it into the pkg dir) or DATADIR=/home/bla/pkg/usr/share/ufoai(where he trys to look for that files even after installation.)
since i dont solved the problem with your hint i postet the makefile into a pastebin, maybe u can tell how to actually work around this.
http://pastebin.com/m3da70e68 -
Need to setup Oracle 10g Sandbox for Class
Hello all,
This is the first time I am teaching a class on Oracle 10g. I would like some advice on how to do the initial setup of the database. I have 14 students in my class. I want to create each of them an account and I want each of them to be able to create tables in a sandbox. I do not want student A to be able to see student B's tables or do anything to them. I would like each student to be able to create tables with the same name. If Student A creates a table called Inventory, Student B should be able to create a table called Inventory without colliding with Student A's table. What would be a simple way to do this? Thank you!Sorry if you took it wrong, but it was not clear from your first post.
So, to try to give a "better" answer, assuming you have only one database for all your student, you should not be afraid they "see" tables from eachother.
Oracle allow multiple times same object name hosted by different users, as long as they have no public synonym.
You should create the users with the minimum rights you want they will do (create table, create view) without forgot create session and quota against the proper tablespace, and probably you should give them a default tablespace as well. But avoid any powerful rights like DBA, RESOURCE and CONNECT, they would be able then to fire some commands you want to avoid.
Nicolas. -
[svn:fx-3.x] 11952: Merging a drag/ drop related trunk change that should have made it into 3.x.
Revision: 11952
Revision: 11952
Author: [email protected]
Date: 2009-11-18 12:42:08 -0800 (Wed, 18 Nov 2009)
Log Message:
Merging a drag/drop related trunk change that should have made it into 3.x.
QE notes: None
Doc notes: None
Bugs: SDK-15988
Reviewer: Jason (originally)
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15988
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/airframework/src/mx/managers/NativeDragManagerI mpl.asObrigado, Dude! Instalei o SQL Developer agora mesmo no GNU/Linux Ubuntu 11.10, depois de uma longa procura na internet pela melhor forma de instalar o SQL Developer. Parabés pelo "post".
Traslate:
Thanks, Dude! I installed SQL Developer now in GNU / Linux Ubuntu 11.10, after a long search on the internet for the best way to install SQL Developer. Parabés by "post". -
An Invalid Setup has been detected for the current Transaction Type in AME
Gurus,
I am constantly getting an error An Invalid Setup has been detected for the current Transaction Type in Approvals Management
My client have 3 units say A,B,C. A requirement is such that whenever a vacancy is created, an approval should be sought from units HR manager.
I have created a dynamic query for this and it is working fine for first two units say A & B. i.e. whenever somebody from unit A or B creates a vacancy it is correctly fetching the
respective units managers. But, this whole AME is not working for unit C. An error pops out which says *An Invalid Setup has been detected for the current Transaction Type in
Approvals Management* . Can anybody tell me what can be the issue?
Edited by: 919527 on Aug 8, 2012 12:40 AM
Edited by: 919527 on Aug 8, 2012 12:41 AMSolved it. The cursor wsa fetching two rows in plcae of one.
-
Revision: 4637
Author: [email protected]
Date: 2009-01-23 04:40:16 -0800 (Fri, 23 Jan 2009)
Log Message:
Update config testsuite on blazeds/trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory. Change some things around in the mxunit build.xml to make this possible, mainly allow things like test directory, reports directory etc. to be passed in as ant properties.
Add browserServer.jar to the qa-regress-sdk.zip file used for regression runs.
Update blazeds/trunk to use the latest qa-frameworks.zip.
Checkintests: passed
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/build.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zipJust checked but could only find this thread Unable to run ADFBC JUNIT Test Classes with JDEV11G 11.1.1.6
As it's also dealing with junit and 11.1.1.6.0 you might want to read it.
Timo -
Revision: 12673
Revision: 12673
Author: [email protected]
Date: 2009-12-08 14:41:28 -0800 (Tue, 08 Dec 2009)
Log Message:
Integrating latest FXGUtils now that TLF 566 is in trunk (which includes a fix for TLF 2497992).
Changelist: 646928
Implementation-Title: FXG Compiler
Implementation-Version: 1.414471
BuildDate: 2009/12/04:03:06:24
Notes:
Made bitmap clipping implementation more efficient.
Bug(s) Fixed:
- #2491501 (Inconsistent word spacing results between MXMLC static and runtime compilation)
- #2492932 (MXMLC gets null pointer exception on this FXG)
- #2489341(FXG with a large BitmapImage results in a malformed SWF)
- Added code to break down straight edges whose dx or dy exceeds 65535 twips into smaller segments.
- #2495874 (many objects are missing in Opacity.fxg renders via MXMLC static compiler)
- FXGUtils now ignores gradient entries of more than 15 gradient entries.
- It logs warnings for such violations and continues processing.
QE notes: Yes, please remove whiteSpaceCollapse="preserve" from static FXG mustella test cases or please regenerate bitmaps.
Doc notes: N/A
Localization: No, there are just resource strings removed in this changelist, no new strings.
Bugs: N/A
Reviewer: Sujata
Tests run: Checkintests, mustella spark/core/fxg (25 failures all relating to tests that have whiteSpaceCollapse="preserve" but the reference bitmap do not expect this behavior and should be regenerated or tests modified).
Is noteworthy for integration: Yes
Modified Paths:
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/FXGException_en.properties
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/fxg/swf/FXG2SWFTranscoder.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/AbstractFXGNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/ContentPropertyNode.j ava
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/TextNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/LinearGradientF illNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/fills/RadialGradientF illNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/filters/GradientBevel FilterNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/filters/GradientGlowF ilterNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/LinearGradien tStrokeNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/strokes/RadialGradien tStrokeNode.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/sax/FXGSAXScanner.java
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/swf/ShapeHelper.java
Added Paths:
flex/sdk/trunk/modules/fxgutils/src/java/com/adobe/internal/fxg/dom/PreserveWhiteSpaceNod e.java -
[svn:bz-trunk] 8453: Update qa-frameworks. zip on blazeds trunk to pick up fix for QETOOLS-39.
Revision: 8453
Author: [email protected]
Date: 2009-07-08 08:50:29 -0700 (Wed, 08 Jul 2009)
Log Message:
Update qa-frameworks.zip on blazeds trunk to pick up fix for QETOOLS-39.
Ticket Links:
http://bugs.adobe.com/jira/browse/QETOOLS-39
Modified Paths:
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip -
My wife and I share the same iTunes account. How do I setup a separate account for her? Can I do it using my iMac?
ThanksUsing More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax. -
Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S EDear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E -
An Invalid Setup has been detected for the cur..For PO Approval AME -R1211
Hi Friends,
I am using R12.1.1
I set up AME for Purchase Order Approval and when i run Test Workbench I am getting the following error:
An Invalid Setup has been detected for the current Transaction Type in Approvals Management.Please contact your system administrator.
My sertup uis correct? so whta's cauising this issue? is it a Bug?
Regards,
DBPlease see these docs.
An Invalid Setup has been detected for the current Transaction Type in Approvals Management. [ID 602920.1]
Leave Of Absence Approval Failing With - An Invalid Setup Has Been Detected For The Current Transaction Type In Approvals Management [ID 437835.1]
Invalid Setup Has Been Detected For The Current Transaction Type In Approvals Management [ID 1313961.1]
An Invalid setup has been detected for the current transaction type [ID 1300417.1]
Connect By Loop Problem in Supervisor Hierarchy [ID 579750.1]
When Submitting Competence Profile With Approval Off Warning Message Received [ID 759245.1]
Absence Mgmt Not Initiating HR Workflow Giving AME Errors [ID 852867.1]
Initiating A Transaction That Goes For Approval Fails With ORA-06502 [ID 795063.1]
Thanks,
Hussein -
Windows 8 setup does not prompt for license key, then fails, on hp envy notebook
Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
PierreHi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com -
Is there any way to setup a email account for sending only
is there any way to setup a email account for sending only? i have a pop account that i fwd to my google acct, so all my mail is mapi thru google/exchange. i do need this account as a send email address so currently i have entered a wrong password so i do not duplicate my inbox. its annoying as i get the bad reteival popup continuessly. Many email products, like outlook allow you to decide which accounts to download. it should be a simple fix from Apple, but dont think there is any one to talk too about this. other option is to use the gmail app or chrome, but like apple's email better for iphone Any ideas??
Read here:
http://apple.stackexchange.com/questions/26105/iphone-mail-send-only-account -
How can I setup different number range for each company code?
Dear GURU,
Is it possible to setup different number range for material document by company code? If yes, what should i do.
Thank you in advance.
ThammaritHi,
you maintain the number assignment for the following documents:
material documents
physical inventory documents
The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
Caution: Change in the Fiscal Year
If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
Example:
Interval for 1995: 4900000000 to 4999999999 status: 4900451234
Interval for 1996: 4900000000 to 4999999999 status: 4900000000
If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
Physical inventory documents
Number range interval from 0100000000 to 0199999999
This group contains the following transaction/event types:
- IB Physical inventory documents
- ID Physical inventory documents for counts and differences
without reference
- IN Physical inventory documents for recounts
- IZ Physical inventory documents for count without reference
- WV Physical inventory documents for difference postings in the WM System
Material documents for goods movements and inventory differences
Number range interval from 4900000000 to 4999999999
This group contains the following transaction/event types:
- WA Goods issues, transfer postings, other goods receipts
- WH Goods movements for handling units (HU)
- WI Material documents for inventory adjustment postings
- WL Goods issues for delivery documents (SD)
- WQ Goods movements for usage decisions (QM)
- WR Goods movements for completion confirmations (PP)
- WS Goods movements for run schedule headers (PP)
- WZ Documents for batch status changes
Material documents for goods receipts
Number range interval from 5000000000 to 5999999999
This group contains the following transaction/event types:
- WE Goods receipts for purchase orders
- WF Goods receipts for production orders
- WO Subsequent adjustment of subcontract orders
- WW Subsequent adjustment of active ingredient materials
Inventory sampling numbers
Number range interval from 0200000000 to 0299999999
This group contains the transaction/event type SI.
SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
Note
For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
Actions
Check whether you can use the predefined groups and number intervals.
If you want to change any groups, proceed as follows:
a) Choose Group -> Maintain.
b) Select the transaction/event type that you want to re-allocate.
c) Place the cursor on the new group and choose Edit -> Assign element group).
d) Save your settings.
If you want to define new groups, proceed as follows:
a) Select Group -> Maintain.
b) Then select Group -> Insert.
c) Enter a text for the number range group.
d) Maintain the number interval for this number range group.
e) Allocate the transaction/event types to the number range groups (see step 2).
If you want to maintain new number range intervals for an existing group, proceed as follows:
a) Choose Group -> Maintain.
b) Select a group and choose Interval -> Maintain.
c) Choose Edit -> Insert year.
d) Maintain the number interval for the new fiscal year.
If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
Note on transport
You transport number range objects as follows:
In the initial screen, choose Interval -> Transport.
Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted.
Thanks and regards
Rajesh -
when i login to MES operator resp..i get a error saying...You must setup an HR employee for this Oracle Application user...how to resolve this?
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine
Maybe you are looking for
-
Multivalue Error ? one user affect another user not affect !!!
Hi all, My user raised one issue. Details below: He is getting multivalve error when he execute the report (Webi) using his credentials .but other user can execute the same report without error As per my understanding itu2019s not possible because it
-
I have a problem with runing a jar file
after i compiled the hole project into a jar file when i want to run it i get this error: ======================================================== C:\Documents and Settings\BlackShark>java -jar D:/eclipse/workspace/Bazooka/E xe/Bazooka-Server.jar Exc
-
What are the new tax patches to be attached for the FY 2008 in India....
Hi Experts.... What are the new tax patches to be added for the tax calculations for the Financial year 2008.Please advice... regards, sai.
-
Question ... what is needed to download RAW files from my Sony NEX 6 to Lightroom 4 on my Mac?
-
Problems with official Digital Copys (e.g. Death Race) on Zen-Player (8 GB)
Hi, I'm having some problems with my Zen Player and the official digital copies of "The Dark Knight" (inluded as DVD in the Blu-ray Box) and "Death Race" (included as DVD-5 in the two disc steelbook). When I try to copy the wmv-files via Windows Expl