Svrmgrl connect internal fails after changing oracle os user passwd on 8.06

Hello,
I've this problem.
I've installed oracle rdbms 8.0.6 on HP-UX 10.20.
I've choosen o.s. authentication system with password file.
In the password file I set the password of the os user oracle which owns installation.
In first time svrmgrl connect internal looks good.
But when I've changed oracle os user password, and i retry to do connect internal
I receive the following message:
SVRMGR> connect internal;
Password:
Password:
ORA-01031: insufficient privileges
I've tried to reset the password to the old one, but it's unuseful
Could someone help me?

In the password file I set the password of the os
user oracle which owns installation.The Password for the password file is supposed to be the SYS password and not OS User oracle which owns installation.
I do not think the Oracle OS user password change is the problem. When you alter SYS password using the alter user command, it should change the password file automatically.
Try
SVRMGR> connect sys/sys_password as see whether it works. If it does not, then check other issues.

Similar Messages

Re-config of ssh fails after changing Oracle Home while installing RAC

Hi,
Red Hat Linux 5
Oracle 10.2.0.1 RAC installation
While installing Oracle RAC under ORACLE user we are Configuring ssh for the first time works fine. If any changes done (Eg: i changed the home path of oracle user), then the ssh configuration will prompt for password no matter how many times you reconfigure the ssh.
I have created another OS user orclusr instead of oracle to over come this issue
Have any one came across this situation or finds a solution, please reply back.
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 12:33 PM

hariharan.thyagarajan wrote:
Hi,
One of the most important reasons for building Real Application Clusters is stability.
Changing the Oracle Home, after the cluster is built is about 180 degrees counter to this philosophy.
I agree with this but we face the error while installing oracle cluster
here is my scenario:
create oracle user on both the nodes(rac1,rac2):
1) my first oracle home - /home/oraclePart of thinking these things through before proceeding is to recognize that the concept of ORACLE_HOME is not the same as the $HOME directory for the OS user who happens to be named "oracle".
Since you appear to be still in the process of building this system, I'd suggest you go back to square one while you can.
2) configure ssh on both the nodes
3) due to sapce constraint in /home mount point we changed the oracle home to /oracle
4) so my new oracle home is /oracle
5) re-configuring of ssh is working fine, no error's
6) but if i issue the below command ssg date rac2 it prompts for password why ?
Any possibility to over come this issue ?
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 1:14 PM

Cant connect on rman after change password sys user

Hello,
After of to change the sys password user not enable to connect with: rman target /
Somebody can help me?
Eder

hello,
I am using a script:
$ORACLE_HOME/bin/rman target/ catalog rman/rman@rman
run{
backup database;
the output:
RMAN> 2> 3> 4>
configuration for DISK channel 2 is ignored
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of crosscheck command at 10/14/2008 07:14:21
RMAN-12001: could not open channel ORA_DISK_1
RMAN-10008: could not create channel context
RMAN-10003: unable to connect to target database
ORA-01017: invalid username/password; logon denied
RMAN>
the content of my sqlnet.ora:
LOG_FILE_SERVER=server.ora
LOG_FILE_CLIENT=client.ora
TRACE_DIRECTORY_CLIENT=$ORACLE_HOME/network/trace
TRACE_DIRECTORY_SERVER=$ORACLE_HOME/network/trace
TRACE_UNIQUE_CLIENT=ON
TRACE_LEVEL_CLIENT=26
Eder
Edited by: ederpitt on Oct 14, 2008 9:40 AM

Svrmgrl: connect internal requires password after system crash

Please help.
I'm running Oracle 7.3.4 on SunSolaris 2.6.
It seems we had a system crash.
Message when I try to restart the database
with the runscirpt (rtc2.d....)
"Database "SID" possibly left running when system went down (system crash?).
Notify Database Administrator.
Kennwort:
Kennwort:
SVRMGR> ORA-01031: insufficient privileges
SVRMGR> ORA-01031: insufficient privileges
SVRMGR>"
also when I attemting:
svrmgrl connect internal
I'm prompted for a password (Kennwort).
I don't know the password.
I tried it as root and oracle user.
Any suggestions or help?
Thank you.
null

In the password file I set the password of the os
user oracle which owns installation.The Password for the password file is supposed to be the SYS password and not OS User oracle which owns installation.
I do not think the Oracle OS user password change is the problem. When you alter SYS password using the alter user command, it should change the password file automatically.
Try
SVRMGR> connect sys/sys_password as see whether it works. If it does not, then check other issues.

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

After changing a Standard-User-Account to a Microsoft-User-Account, does the OS UPLOAD (to cloud) all images in the folder used to hold all background images? Or, maybe, just the first 2 (or 20...)?

TIA.

Hi,
In Windows 8, 8.1, User can use Microsoft Account to login system. This account can be use to sync its user setting, profile, such as background, IE history. that's to say, when you login another Windows 8 or 8.1 system, If your computer connected to Internet,
it would sync your User setting and profile to this second system.
Roger Lu
TechNet Community Support

Connection fails after changing router to wpa

hi there i got a wireless-b BEFW11S4 router and my pc is using a wireless-g adaptor. my internet is supplied by a company who reguired us to change to wpa and after that my pc could't connect to the internet. my laptop is still able to connect so im wondering what is wrong

im not sure but that shouldn't be the case. my adaptor can connect fine when i disable the wireless security(wpa pre-shared key)in the router wireless settings. unless ofcuase that a b router cant accept a g adadpotr when running wpa

RMAN Backup job fails after changing sys, system passwords

Hello Oracle community,
11.1g
After we changed the passwords for sys, system and sysman the backup jobs fails. this is my error log:
Recovery Manager: Release 11.1.0.7.0 - Production on Mo Aug 30 11:16:29 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12532: TNS: Ungültiges Argument
RMAN>
Echo einstellen ein
RMAN> set command id to 'BACKUP_MEGALON.INT_083010111617';
Befehl wird ausgeführt: SET COMMAND ID
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei set Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' database;
Starten backup um 30.08.10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> backup device type disk tag 'BACKUP_MEGALON.INT_083010111617' archivelog all not backed up;
Starten backup um 30.08.10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: Fehler bei backup Befehl auf 08/30/2010 11:16:29
RMAN-06171: Nicht bei Zieldatenbank angemeldet
RMAN> exit;
Recovery Manager abgeschlossen.
Ikrischer

Hello Tychos,
I am able to make a sqlplus connection, but your hint send me in the correct direction. I had a special character "@" in the password and I think that was the reason for my problems with RMAN.
Ikrischer

Load of XML datstore fails after change of PK in from numeric to varchar

I am facing the following problem.
I am trying to load an XML datastore (target) from an Oracle table (source) via an interface.
The primary key in the Oracle table is of data type varchar. However, the primary key in the XML datastore after reverse engineering is created as datatype numeric. When I change the data type of the XML data store PK from numeric to varchar and then execute the interface the load fails with error:
Wrong data type for input string.
Taking the geo_dim.xml in the ODI demo folder as an example I take the following steps:
- I reverse engineered the geo_dim XML that creates amongst other things the Country datastore in the XML model
- When reverse engineering, ODI adds surrogate PK keys to the XML datastore. These are of data type numeric.
- I change this surrogate PK key to data type varchar via the ODI designer and load the XML via an Interface from an Oracle source table that has a PK of type varchar.
- The load of the XML datastore fails with the error "Wrong data type for input string."
Looks like a bug to me. Any ideas?
Thanks
uli

I figured this one out myself. As part of the JDBC URL you can submit a parameter ni. If set to false this will generate FKs and PKs as varchar.
It's in the documentation:
numeric_id or ni
No
boolean (true | false)
true
If set to true, all internal Primary and Foreign Keys are of NUMERIC type. Otherwise, they are of the VARCHAR type.

IE failed after installing oracle forms

Hello ,
I have installed Oracle Forms10g,& DB then .After connecting to DB when I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the form runtime,rather it shows a blank page with a url: http://<My_PC Namexxx-pc>:8889/forms/frmservlet. I came to know that I need to change formsweb.cfg,default.env and registry.dat,I have installed the my jinitiator also. Please help me out how can i run my form locally. I am giving the codes also of those files,if i need to change anything please let me know
default.env*
# $Id: default.env 14-apr-2005.13:22:43 pkuhn Exp $
# default.env - default Forms environment file, Windows version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value in the Windows registry
# will be used. If no value is found in the registry, the value used will
# be that defined in the environment in which the servlet engine (OC4J
# or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# If you need to include more than one directory, they should be semi-colon
# separated (e.g. c:\test\dir1;c:\test\dir2)
FORMS_PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# webutil config file path
WEBUTIL_CONFIG=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\server\webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_REJECT_GO_DISABLED_ITEM=FALSE
FORMS_RESTRICT_ENTER_QUERY=TRUE
# The PATH setting is required in order to pick up the JVM (jvm.dll).
# The Forms runtime executable and dll's are assumed to be in
# E:\ORACLE_INSTALLED\DevSuiteHome_1\bin if they are not in the PATH.
# In addition, if you are running Graphics applications, you will need
# to append the following to the path (where <Graphics Oracle Home> should
# be replaced with the actual location of your Graphics 6i oracle_home):
# ;<Graphics Oracle Home>\bin;<Graphics Oracle Home>\jdk\bin
PATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\bin;E:\ORACLE_INSTALLED\DevSuiteHome_1\jdk\jre\bin\client
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications. In addition, you will need to
# modify the PATH variable above as described above.
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
#GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>\forms\server
# System settings
# You should not normally need to modify these settings
FORMS=E:\ORACLE_INSTALLED\DevSuiteHome_1\forms
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=E:\ORACLE_INSTALLED\DevSuiteHome_1\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\repository.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ldapjclnt10.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\debugger.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\ewt3.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\share.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\utj.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\jlib\zrclient.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\reports\jlib\rwrun.jar;E:\ORACLE_INSTALLED\DevSuiteHome_1\forms\java\frmwebutil.jar
formsweb.cfg_
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=E:\ORACLE_INSTALLED\DevSuiteHome_1
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

I tried to run TEST.FMB(example form given by oracle), My IE(IE8,Windows7) dont show the, I have installed the my jinitiator also.Internet explorer (IE 8) doesn't support jinitiator. You have to upgrade JRE.
Check this link. http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
Hope this will help you
If someone's response is helpful or correct, please mark it accordingly.

Can not start opmn after change OracleAS Metadata Repository Listener Port

Hello,
I installed OracleAS metadata Repository Listener Port, And i change the port of the listener, then flowwoing the manual was needed start teh OID component
But I won´t start

Roberto,
The tail of OIDCTL.log is:
09/02/23 19:14:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/02/23 19:58:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/03/02 16:02:43 Start process
09/03/04 15:57:21 Start process
And the tail for oidmon.log:
2009/03/02:16:02:43 * oidmon_u47pacrm01.unitec.mx:0 *
Updating Process Table...
2009/03/04:14:52:11 * Killed process pid = 1345
2009/03/04:14:52:11 * Monitor Process id = 1345 Terminated
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1374
2009/03/04:14:52:11 * ODISRV Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1370
2009/03/04:14:52:11 * OIDLDAPD Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:15:57:21 * Connecting to database, connect string is te04as
2009/03/04:15:57:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:57:23 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * Connecting to database, connect string is te04as
2009/03/04:15:57:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:01 * Connecting to database, connect string is te04as
2009/03/04:15:58:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:21 * Connecting to database, connect string is te04as
2009/03/04:15:58:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:41 * Connecting to database, connect string is te04as
2009/03/04:15:58:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:01 * Connecting to database, connect string is te04as
2009/03/04:15:59:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:21 * Connecting to database, connect string is te04as
2009/03/04:15:59:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:41 * Connecting to database, connect string is te04as
2009/03/04:15:59:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:01 * Connecting to database, connect string is te04as
2009/03/04:16:00:01 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:21 * Connecting to database, connect string is te04as
2009/03/04:16:00:21 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:41 * Error connecting database. -1
2009/03/04:16:00:41 * Error : Guardian Process terminated
2009/03/04:16:50:45 * Connecting to database, connect string is te04as
2009/03/04:16:50:45 * [gsdsiConnect] ORA-0,
2009/03/04:16:50:45 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:50:47 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * Connecting to database, connect string is te04as
2009/03/04:17:18:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:18:38 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * Connecting to database, connect string is te04as
2009/03/04:17:18:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:16 * Connecting to database, connect string is te04as
2009/03/04:17:19:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:36 * Connecting to database, connect string is te04as
2009/03/04:17:19:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:56 * Connecting to database, connect string is te04as
2009/03/04:17:19:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:16 * Connecting to database, connect string is te04as
2009/03/04:17:20:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:36 * Connecting to database, connect string is te04as
2009/03/04:17:20:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:56 * Connecting to database, connect string is te04as
2009/03/04:17:20:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:16 * Connecting to database, connect string is te04as
2009/03/04:17:21:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:36 * Connecting to database, connect string is te04as
2009/03/04:17:21:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:56 * Error connecting database. -1
2009/03/04:17:21:56 * Error : Guardian Process terminated
-----

Installation fails after changing My Docs position

Installation fails for Adobe Reader after downloading it in the installer. Then starts installing but says "Error installing Adobe Reader", in details: "The path to Documents Programs or the volume are not valid. Insert them again". I was messing with letters of the partitions before this. Just changed my CD to E, then my second partition to D to fix the creation of D for my CD. And changed position of MY Documents to unit D as always.
But i had a weird problem with the Libraries. They got removed, i tried to recover them, and they didn't appear. Then i clicked them through Start button, in IMAGES, DOCUMENTS, and all the fast links together with Control Panel, and they appeared. I fixed it all.
Not when i try to see the "file in the browser" with any program, i can't get it working neither.
How can i solve this?

Ok I fixed it.
I created another account with administration rights. Then i copied everything from my last account (thankfully only the desktop contents and two more files) and deleted the last account. THe new account created the new Library folders which were broken before. Everyhing working perfect.
I guess it´s related to some data Adobe stores in the My Documents folders.
Thanks!

Unable to connect to network after Installing Oracle VM server 2.2.1

Dear All,
I have downloaded Oracle VM Server 2.2.1 from Oracle E-Delivery Site.
I installed it on one server. But after installing it I am not able to connect to the network.
When I am trying to ping other servers, it says Destination Host Unreachable.
Do I need to install something for NIC like eth0 or xenbr0... or network connectivity?
Can anyone have soluiton of this problem?
Yours views & comments are highly appreciated.
Thanks in Advance.

This is the output of
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 xenbr0
172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 172.16.1.254 0.0.0.0 UG 0 0 0 xenbr0
I checked on other machines on same network, they have configured same netmask configured.

Dtlogin fails after changing UID - invalid MIT-MAGIC-COOKIE

The environment is a small stand-alone network of Suns running Solaris 5.10 with no central admin, no DNS. One of the users had login accounts on several machines and asked me to fix it up while he was away. So I consolidated his several home directories onto one machine, changed all the different UIDs on the various Suns to be the same UID, did a chown to match on all the files in his new consolidated home directory, then modified /etc/auto_home on all the machines to point to the new home.
It all works with console or ssh logins and with dtlogin from the machine on which I didn't change the UID (also where his home now resides). But on the other machines where the UID was changed, trying to log into either CDE or JDS soon comes back to the login screen with an error in .dt/startlog: "invalid MIT-MAGIC-COOKIE-1 key", "Xlib: connection to :0.0 refused by server". I'm guessing the problem is because the user's current UID is different that what it was before on this machine.
I tried deleting his ~/.*authority files, moving his ~/.dt directory out of the way, and even deleted and recreated the user on one of the remote machines with no joy. This user is going to be mighty unhappy with me when he gets back from vacation next week! Help.
Edited by: SanDiegoDweller on Aug 12, 2010 7:18 PM -- added a bit more clarification

Thanks to these suggestions I was able to determine that the X stuff was still referring to the user's old home directory on the local machine rather than his automounted home directory.
All the local disks were called /export/home -- in an effort to deconfuse myself and make sure I knew which disk space was being used, I changed them to /export/home-A and /export/home-B on machines A and B (renamed the directory and changed /etc/vfstab). All normal logins work, but no X logins work. When logged in as the user, xauth says "error in locking authority file /export/home/user/.Xauthority" but there are no longer any /export/home directories! This is after I've deleted his .Xauthority file. Apparently, the X stuff is remembering somewhere an old path. How can I clean this up?
Edited by: SanDiegoDweller on Aug 16, 2010 12:54 PM

Cannot connect to database after change of server ip

hi gems..
the ip of our database server has got changed.
Windows server, 11gr2 database version, archivelog mode.
i have changed the tnsnames.ora and the listener.ora manually with the new ip.
I am able to connect to sqlplus "/as sysdba" (since authentiacetion services is NTS)
But i am not able to connect to 'sqlplus sys/password@sid as sysdba'
it is throwing the error of
ERROR:
ORA-12560: TNS:protocol adapter error
pls help...

tnsping sid:
E:\>tnsping ORCL
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 28-FEB-2
012 19:11:53
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
E:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 10.184.1
32.101)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)
TNS-12560: TNS:protocol adapter error
E:\>
lsnrctl status
E:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 28-FEB-2012 19:13
:13
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.184.132.101)(PORT=152
1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
listener.ora
# listener.ora Network Configuration File: E:\app\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.184.132.101)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = E:\app
ipconfig
E:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.184.132.101
Subnet Mask . . . . . . . . . . . : 255.255.252.0
Default Gateway . . . . . . . . . : 10.184.132.1
i have changed the ip 10.184.132.101 manually as per the new ip.

Svrmgrl connect internal fails after changing oracle os user passwd on 8.06

Similar Messages

Maybe you are looking for