SW-3850 stacking with different License Levels?

we will be decommissioning the 3750 that is uplinked to a 3850-48port and will be connecting a 3850-24port in full stack-wise and stack-power High availability mode………now it will have the same IOS but the License Level will be different….so my question is will the two switches become stackable with different License Levels?

Hi,
it so not possible stack two switches with different licence. You will have to order new license to be same on both switches.
Please read Q&A for 3850 switch. See link below question "What are the license requirements for a Cisco Catalyst 3850 switch stack?"
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html
HTH
Jan
Please rate answer if useful

Similar Messages

3850 stackable with different License Levels?

We will be decommissioning a 3750 that is uplinked to a 3850-48 port and will be connecting a 3850-24 port in full stack-wise and stack-power High availability mode………now it will have the same IOS but the License Level will be different….so my question is will the two switches become stackable with different License Levels?

Based on the FAQ that is not supported:
You find the FAQ on http://www.cisco.com/go/3850 -> FAQ
Q. What are the license requirements for a Cisco Catalyst 3850 switch stack?
A. In a Cisco Catalyst 3850 stack, all switches should be at the same image-based license (IP Services/IPBase/LAN Base) level. The active switch license level is considered as the reference, and the member switch licenses are compared against it. If there is a mismatch, the active switch with the syslog message “ license mismatch error” indicates that the stacking was unsuccessful.
Q. How is a “ license mismatch error” fixed in a Cisco Catalyst 3850 stack?
A. The license level of the mismatch stack member switch can be changed with the license right-to-use activate <license> all acceptEULA CLI command (entire stack should have the same wired license level) and reloaded from the active switch console. This will enable the member switch to join the stack successfully. The customer has to purchase a license before moving to a specific license level.

Export with different audio levels

I need, very often, to export the same clip with different audio levels.
Is it possible to make presets with altered audio levels, let's say one for -12db and one for -8db.
Until now, i alter the audio level in Premiere, then I make one export, then I go back to Premiere, change again the audio level, I make the second export etc. It works, but it is very time consuming.
Thanx in advance.

It is currently not possible. However, feel free to log a feature request:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

IRQxx is being shared by drivers with different interrupt levels

Hi
Oracle Solaris 10 8/11 s10x_u10wos_17b X86
HP DL380 G5
We have some messages in /var/adm/messages:
Oct 24 07:39:15 phssmb0a unix: [ID 954099 kern.info] NOTICE: IRQ17 is being shared by drivers with different interrupt levels.
Oct 24 07:39:40 phssmb0a unix: [ID 954099 kern.info] NOTICE: IRQ16 is being shared by drivers with different interrupt levels.
This may result in reduced system performance
echo ::interrupts -d | mdb -k
IRQ Vect IPL Bus Trg Type CPU Share APIC/INT# Driver Name(s)
1 0x40 5 ISA Edg Fixed 3 1 0x0/0x1 i8042#0
3 0xb1 12 ISA Edg Fixed 6 1 0x0/0x3 asy#1
4 0xb0 12 ISA Edg Fixed 5 1 0x0/0x4 asy#0
9 0x81 9 PCI Lvl Fixed 1 1 0x0/0x9 acpi_wrapper_isr
12 0x41 5 ISA Edg Fixed 4 1 0x0/0xc i8042#0
14 0x46 5 ISA Edg Fixed 2 1 0x0/0xe ata#0
16 0x84 9 PCI Lvl Fixed 7 2 0x0/0x10 ehci#0, uhci#0
17 0x85 9 PCI Lvl Fixed 0 1 0x0/0x11 uhci#1
18 0x86 9 PCI Lvl Fixed 3 2 0x0/0x12 uhci#2, cpqary3#0
19 0x87 9 PCI Lvl Fixed 1 1 0x0/0x13 uhci#3
22 0x88 9 PCI Lvl Fixed 2 2 0x0/0x16 uhci#4, cpqci#0
24 0x82 7 Edg MSI 2 1 - pcieb#1
25 0x30 4 Edg MSI 4 1 - pcieb#0
26 0x83 7 Edg MSI 5 1 - pcieb#2
27 0x31 4 Edg MSI 6 1 - pcieb#4
28 0x42 5 Edg MSI-X 5 1 - qlc#0
29 0x43 5 Edg MSI-X 6 1 - qlc#0
30 0x44 5 Edg MSI-X 7 1 - qlc#1
31 0x45 5 Edg MSI-X 0 1 - qlc#1
32 0x60 6 Edg MSI 1 1 - e1000g#0
160 0xa0 0 Edg IPI all 0 - poke_cpu
192 0xc0 13 Edg IPI all 1 - xc_serv
208 0xd0 14 Edg IPI all 1 - kcpc_hw_overflow_intr
209 0xd1 14 Edg IPI all 1 - cbe_fire
210 0xd3 14 Edg IPI all 1 - cbe_fire
240 0xe0 15 Edg IPI all 1 - xc_serv
241 0xe1 15 Edg IPI all 1 - apic_error_intr
What is the solution, help needed please
Walter

I am looking at something similar.
On boot I receive the above notices for IRQ 17 and IRQ18. Not seeing any further messages after boot, though.
# echo ::interrupts -d | mdb -k
IRQ Vect IPL Bus Trg Type CPU Share APIC/INT# Driver Name(s)
9 0x80 9 PCI Lvl Fixed 1 1 0x0/0x9 acpi_wrapper_isr
16 0x20 1 PCI Lvl Fixed 0 1 0x0/0x10 sdhost#0
17 0x81 9 PCI Lvl Fixed 1 4 0x0/0x11 ehci#2, ehci#1, ehci#0, yge#0
18 0x82 9 PCI Lvl Fixed 0 5 0x0/0x12 ohci#3, ohci#2, ohci#1, ohci#0, yge#1
19 0x40 5 PCI Lvl Fixed 0 2 0x0/0x13 pci-ide#0, pci-ide#0
24 0x83 7 PCI Edg MSI 1 1 - pcieb#0
25 0x30 4 PCI Edg MSI 0 1 - pcieb#1
26 0x84 7 PCI Edg MSI 1 1 - pcieb#2
27 0x31 4 PCI Edg MSI 0 1 - pcieb#4
28 0x85 7 PCI Edg MSI 1 1 - pcieb#5
29 0x60 6 PCI Edg MSI 1 1 - rge#0
160 0xa0 11 Edg IPI all 0 - poke_cpu
208 0xd0 14 Edg IPI all 1 - kcpc_hw_overflow_intr
209 0xd1 14 Edg IPI all 1 - cbe_fire
210 0xd3 14 Edg IPI all 1 - cbe_fire
240 0xe0 15 Edg IPI all 1 - xc_serv
241 0xe1 15 Edg IPI all 1 - apic_error_intr

IRQ20 is being shared by drivers with different interrupt levels.

Hello!
In my logs this error occurs about once a day:
unix: [kern.info] NOTICE: IRQ20 is being shared by drivers with different interrupt levels.
This may result in reduced system performance.I cannot find any information about this message. Do I have to worry about it?
TIA
Stephan

I'm seeing the same error msg as well (with IRQ28).. Bump..

How to save Jobs with different priority level in a Queue?

Hi, Friends,
I have a set of Job (see below) objects.
I would make a queue: if they have the save priority level, first in and first out. this is easy to do by ArrayList. however, If they have different priority level, I would like make the Jobs with the highest level first out.
How can I implemented this idea in Java?
Regards,
Youbin
public class Job {
private short _priorityLevel = 0;
public void setPriorityLevel(short priorityLevel) {
this._priorityLevel = priorityLevel;
public short getPriorityLevel() {
return _priorityLevel;

Hi,
Here is my test code, it works:
public class Job implements Comparable{
private int _priorityLevel=0;
private String _jobDescription=null;
public Job() {
public void setPriorityLevel(int priorityLevel) {
this._priorityLevel=priorityLevel;
public int getPriorityLevel() {
return this._priorityLevel;
public void setJobDescription(String jobDescription) {
this._jobDescription=jobDescription;
public String getJobDescription() {
return this._jobDescription;
public int compareTo(Object obj) {
return (this._priorityLevel-((Job)obj)._priorityLevel);
import java.util.LinkedList;
import java.util.Iterator;
import java.util.Collections;
import java.util.Collection;
public class test {
public test() {
public static void main(String[] args) {
Job job1 = new Job();
job1.setJobDescription("Job1");
job1.setPriorityLevel(2);
Job job2 = new Job();
job2.setJobDescription("Job2");
job2.setPriorityLevel(2);
Job job3 = new Job();
job3.setJobDescription("Job3");
job3.setPriorityLevel(2);
Job job4 = new Job();
job4.setJobDescription("Job4");
job4.setPriorityLevel(1);
Job job5 = new Job();
job5.setJobDescription("Job5");
job5.setPriorityLevel(1);
Job job6 = new Job();
job6.setJobDescription("Job6");
job6.setPriorityLevel(1);
LinkedList linkedList = new LinkedList();
linkedList.addLast(job1);
linkedList.addLast(job2);
linkedList.addLast(job4);
Iterator ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
System.out.println("---------");
Collections.sort(linkedList);
ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
System.out.println("---------");
linkedList.addLast(job3);
ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
System.out.println("---------");
Collections.sort(linkedList);
ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
System.out.println("---------");
linkedList.addLast(job5);
linkedList.addLast(job6);
ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
System.out.println("---------");
Collections.sort(linkedList);
ite=linkedList.iterator();
while (ite.hasNext()) {
System.out.println(((Job)ite.next()).getJobDescription());
}

Restrict Access To Page Not Working with Different Auth Levels

I have just started playing with the idea of using different auth levels to allow different users access to certain pages on my site.
Within my SQL database I have a authlevel table consisting of 3 possible levels (guest, user, admin)
I am using the Dreamweaver "Log in user" to log in users based on username, pass, and auth level and "Restrict access to page" set to allow user levels 'user' and 'admin'.
The problem, however, occurs when trying to log in. No matter what auth level I try I am redirected to my page where users should be redirected if they are not allowed to enter that page.
I have included below my code from my login page and the page where all authorized users (user and admin) should be directed upon entering the restricted area.
Login Page:
<?php require_once('../Connections/hondovfd.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['username'])) {
$loginUsername=$_POST['username'];
$password=$_POST['password'];
$MM_fldUserAuthorization = "authlevel";
$MM_redirectLoginSuccess = "/membersonly/membersonly.php";
$MM_redirectLoginFailed = "/membersonly/loginfailed.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_hondovfd, $hondovfd);
$LoginRS__query=sprintf("SELECT username, password, authlevel FROM login WHERE username=%s AND password=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $hondovfd) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
    $loginStrGroup = mysql_result($LoginRS,0,'authlevel');
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Log In</title>

<meta name="description" content="Hondo Fire and Rescue serves the Arroyo Hondo and Canada Village areas of Santa Fe County, NM." />
<meta name="keywords" content="hondo, hondo fire, hondo vfd, hondo fire department, santa fe county fire department, santa fe county, volunteer fire department, hondo volunteer fire department" />
<link href="../stylesheet.css" type="text/css" rel="stylesheet" />

<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body class="thrColLiqHdr">
<div id="container">
<div id="header"></div>
<div id="sidebar1">
<h3>Navigation : </h3>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="/index.php">Home</a></li>
<li><a href="/support.php">Support Hondo</a></li>
<li><a class="MenuBarItemSubmenu" href="#">Information Menu</a>
    <ul>
      <li><a href="/people.php">Our People</a></li>
      <li><a href="http://www.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=101620713606637979698.00045b6ead4ab4ea70b78&z=11" target="_blank">Response Area</a></li>
      <li><a href="/medical.php">Medical</a></li>
      <li><a href="/apparatus.php">Apparatus</a></li>
      <li><a href="/training.php">Training</a></li>
      <li><a href="/volunteer.php">Volunteer</a></li>
      <li><a href="/statistics.php">Statistics</a></li>
      <li><a href="/patchtrading.php">Patch Trading</a></li>
    </ul>
</li>
<li><a href="/album.php">Photo Gallery</a></li>
<li><a href="/calendar.php">Calendar</a></li>
<li><a href="/news.php">Blog/News</a></li>
<li><a href="/links.php">Links</a></li>
<li><a href="/contact.php">Contact Us</a></li>
</ul>
<br />
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<span class="lefttext">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="8567201">
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_donate_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!" />
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</img></input></input>
</span>
</form>
<span class="lefttext"><br />
</span>
<center>
<span class="lefttext"><a href="http://www.facebook.com/pages/Santa-Fe-NM/Hondo-Volunteer-Fire-Department/74284233488" target="_blank" class="lefttext">Hondo VFD on Facebook</a></span>
</center>
</div>
<div id="sidebar2">
    <p><a href="/membersonly/login.php">Log In</a> | <a href="/membersonly/logout.php">Log Out</a></p>
    <p>Call Statistics for <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/month.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?> as of <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/date.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></p>
<table width="90%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="60%">EMS Calls</td>
    <td width="40%"><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/emscalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
<tr>
    <td>Fire Calls</td>
    <td><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/firecalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
</table>
<hr />
    <div id="cse" style="width:100%;">Loading</div>
<script src="http://www.google.com/jsapi" type="text/javascript"></script>
<script type="text/javascript">
google.load('search', '1');
google.setOnLoadCallback(function(){
    new google.search.CustomSearchControl().draw('cse');
}, true);
</script>
     
</div>

<div id="mainContent">
<div class="top"></div><div class="wrap">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td height="47" class="h2">Members Only Login</td>
</tr>
<tr>
    <td><form ACTION="<?php echo $loginFormAction; ?>" id="login" name="login" method="POST">
    <table width="40%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="31%">Username:</td>
    <td width="69%"><input name="username" type="text" /></td>
</tr>
<tr>
    <td>Password</td>
    <td><input name="password" type="password" /></td>
</tr>
</table>
<input name="Submit" type="submit" />
    </form></td>
</tr>
</table>

</div>
<div class="bottom"></div>
</div>
      <br class="clearfloat" />
<div id="footer">
    <p align="center">© Copyright 2009 Hondo Volunteer Fire Department | <a href="mailto:[email protected]">Contact Us</a><a href="http://www.legalhelpers.com/chapter-13-bankruptcy/chapter13.html"></a><br />Hosting provided by <a href="http://studiox.com/" target="_blank">Studio X</a></p>
</div>
</div>
<script type="text/javascript">

</script>
<?php include_once("/var/home/hondovfd/hondovfd.org/www/analyticstracking.php"); ?>
</body>
</html>
Other Page:
<?php
if (!isset($_SESSION)) {
session_start();
$MM_authorizedUsers = "user,admin";
$MM_donotCheckaccess = "false";
// *** Restrict Access To Page: Grant or deny access to this page
function isAuthorized($strUsers, $strGroups, $UserName, $UserGroup) {
// For security, start by assuming the visitor is NOT authorized.
$isValid = False;
// When a visitor has logged into this site, the Session variable MM_Username set equal to their username.
// Therefore, we know that a user is NOT logged in if that Session variable is blank.
if (!empty($UserName)) {
    // Besides being logged in, you may restrict access to only certain users based on an ID established when they login.
    // Parse the strings into arrays.
    $arrUsers = Explode(",", $strUsers);
    $arrGroups = Explode(",", $strGroups);
    if (in_array($UserName, $arrUsers)) {
      $isValid = true;
    // Or, you may restrict access to only certain users based on their username.
    if (in_array($UserGroup, $arrGroups)) {
      $isValid = true;
    if (($strUsers == "") && false) {
      $isValid = true;
return $isValid;
$MM_restrictGoTo = "/membersonly/loginfailed.php";
if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {
$MM_qsChar = "?";
$MM_referrer = $_SERVER['PHP_SELF'];
if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
if (isset($QUERY_STRING) && strlen($QUERY_STRING) > 0)
$MM_referrer .= "?" . $QUERY_STRING;
$MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
header("Location: ". $MM_restrictGoTo);
exit;
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Members Only Area</title>

<meta name="description" content="Hondo Fire and Rescue serves the Arroyo Hondo and Canada Village areas of Santa Fe County, NM." />
<meta name="keywords" content="hondo, hondo fire, hondo vfd, hondo fire department, santa fe county fire department, santa fe county, volunteer fire department, hondo volunteer fire department" />
<link href="../stylesheet.css" type="text/css" rel="stylesheet" />

<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
</head>
<body class="thrColLiqHdr">
<div id="container">
<div id="header"></div>
<div id="sidebar1">
<h3>Navigation : </h3>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="/index.php">Home</a></li>
<li><a href="/support.php">Support Hondo</a></li>
<li><a class="MenuBarItemSubmenu" href="#">Information Menu</a>
    <ul>
      <li><a href="/people.php">Our People</a></li>
      <li><a href="http://www.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=101620713606637979698.00045b6ead4ab4ea70b78&z=11" target="_blank">Response Area</a></li>
      <li><a href="/medical.php">Medical</a></li>
      <li><a href="/apparatus.php">Apparatus</a></li>
      <li><a href="/training.php">Training</a></li>
      <li><a href="/volunteer.php">Volunteer</a></li>
      <li><a href="/statistics.php">Statistics</a></li>
      <li><a href="/patchtrading.php">Patch Trading</a></li>
    </ul>
</li>
<li><a href="/album.php">Photo Gallery</a></li>
<li><a href="/calendar.php">Calendar</a></li>
<li><a href="/news.php">Blog/News</a></li>
<li><a href="/links.php">Links</a></li>
<li><a href="/contact.php">Contact Us</a></li>
</ul>
<br />
<form action="https://www.paypal.com/cgi-bin/webscr" method="post">
<span class="lefttext">
<input type="hidden" name="cmd" value="_s-xclick">
<input type="hidden" name="hosted_button_id" value="8567201">
<input type="image" src="https://www.paypal.com/en_US/i/btn/btn_donate_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!" />
<img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">
</img></input></input>
</span>
</form>
<span class="lefttext"><br />
</span>
<center>
<span class="lefttext"><a href="http://www.facebook.com/pages/Santa-Fe-NM/Hondo-Volunteer-Fire-Department/74284233488" target="_blank" class="lefttext">Hondo VFD on Facebook</a></span>
</center>
</div>
<div id="sidebar2">
    <p><a href="/membersonly/login.php">Log In</a> | <a href="/membersonly/logout.php">Log Out</a></p>
    <p>Call Statistics for <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/month.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?> as of <?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/date.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></p>
<table width="90%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td width="60%">EMS Calls</td>
    <td width="40%"><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/emscalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
<tr>
    <td>Fire Calls</td>
    <td><?php
$myFile = "/var/home/hondovfd/hondovfd.org/www/membersonly/firecalls.txt";
$fh = fopen($myFile, 'r');
$theData = fread($fh, filesize($myFile));
fclose($fh);
echo $theData;
?></td>
</tr>
</table>
<hr />
    <div id="cse" style="width:100%;">Loading</div>
<script src="http://www.google.com/jsapi" type="text/javascript"></script>
<script type="text/javascript">
google.load('search', '1');
google.setOnLoadCallback(function(){
    new google.search.CustomSearchControl().draw('cse');
}, true);
</script>
     
</div>

<div id="mainContent">
<div class="top"></div><div class="wrap">
    <table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td height="47" class="h2">Members Only Area</td>
</tr>
<tr>
    <td><p><a href="/membersonly/documents.php">Useful Documents</a></p>
      <p><a href="/membersonly/IncidentCount01_08.pdf">Current Call Statistics</a> as of 9/3/09</p>
      </td>
</tr>
</table>
<script type="text/javascript">

</script>
</div>
<div class="bottom"></div>
</div>
      <br class="clearfloat" />
<div id="footer">
    <p align="center">© Copyright 2009 Hondo Volunteer Fire Department | <a href="mailto:[email protected]">Contact Us</a><a href="http://www.legalhelpers.com/chapter-13-bankruptcy/chapter13.html"></a><br />Hosting provided by <a href="http://studiox.com/" target="_blank">Studio X</a></p>
</div>
</div>
<script type="text/javascript">

</script>
<?php include_once("/var/home/hondovfd/hondovfd.org/www/analyticstracking.php"); ?>
</body>
</html>

you don't need all that bloat. set a session during login of some kind of uniquely identifying id. i.e.
$_SESSION['id'] = $row_rs['id'];
then on the pages you need to protect, check it like this....
<?php
session_start();
if (!(isset($_SESSION['id']) && $_SESSION['id'] != '')) {
die(header("Location: http://www.notinprotectedareas.com")); }
?>
you can use an include file i.e.
<?php require_once('login_check.php'); ?>
where file is name login_check.php to make your auth controls clean on your protected pages.

ABAP and JAVA stack on different SP Level

Hi
We tried to move our XI System on SP 21 and we managed to do so for ABAP stack on 21, while Java is still in 19.
Will it make a difference and any problem will occur, is there any Notes/Link in this regard for a matrix to prove that inconsistency may occur in such case.
Best Regards
Swetank

Thanks Prateek for your reply. Unfortunately we are not able to do so at the moment. As this being Test system need to make sure that any problems will occur on being different SP Level.
BR / Swetank

Reclassification - Posting Logic with Different Posting Levels

Hi *,
we've a reclassification task on posting level 30.
In SAP online help I've found the statement "The system includes all values of the triggering object(s) entered or posted with a posting level less than or equal to 30.". So I assume that also PL 12 and 22 is covered by our reclassification task. However, I've realized that the task doesn't consider postings on PL 12 or PL22. Within the SAP help I couldn't find a remark that cons group changes are exluded.
Does anyone know whether cons group changes have to be considered by the system?
Thanks in advance!
Daniel

Hi Daniel,
AFAIK, 00, 01, 10, 20 and 30 PLs are considered by the system in case of reclass on the PL 30.
PLs of cons groups changes ( 02, 12 and 22) are not considered.

Activate with different license

Can CS3 be activated with a CS4 license? If I am do not have the authorization to use CS4 can I acitivate a copy of CS3 with its license?

'fraid not. Each version has its own set of serial number that work only for that version.

Restoring the backup on other server with different patch level

Hi Gurus,
I have one HP-UX B11.31 server which holds ORACLE software with 10.2.0.4 patch level, and I have restored one database with the same patch level from HP DataProtector successfully. Now, I want to restore two node RAC database backup with Oracle Patch level of 10.2.0.2 into the Restore server which is of 10.2.0.4 patch level, the RAC database uses ASM, here are the steps which I am going to follow;
1. Create a new database with the same schema as like the RAC database in ASM.
2. Restore & Recover the RAC database backup from Data Protector.
But, I have one question, can I restore & recover the backup which is in lower grade Oracle software patch level i.e; 10.2.0.2 on a higher grade Oracle software patch level ie; 10.2.0.4 ???
?:|
Even after restoring & recovering can the database will work? PLEASE guide.
Thanks in Advance.

Thanks again!!!
The point of upgrading the database comes when there is already a database and one is upgrading the ORACLE software version and then upgrading the database to its version using the scripts you suggest.
Here is the scenario where I have to restore and recover a 10.2.0.2 RAC database backup on 10.2.0.4 sotware version,
*my question is that, whether there will be any conflict of patch version as the Oracle Brain will be of the latest version? Oracle software will successfully restore and recover the database backup with a lower patch version? or it will throw any error when restoring the backup like compatibility unmatched between the software and the backup you are trying to restore & recover?*
yes the RAC database is in ASM.
Thanks & Regards

Compatibility between MII with different patch levels.

Hi all,
I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment.
For many reasons that aren't under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in production.
Are there any point to verify? Can we export from development environment and deploy to production without any changes?
On the contrary, what about having the development environment at a higher patch level than production enviroment (e.g 12.0.8 in development and deploy the solution on a 12.0.5 prduction enviroment)?
Thank in advance for your responses/experiences on this subject.
Best wishes for a nice 2010

Hi,
If you transfer from lower patches to higher patches there will not be any problem as such.
In the otherhand if you trying to export the project from higher to lower patch there you have the problem. Becuase some bugs might have been fixed in the higher patch those are not avaialble in the lower. For example in some date function of BLS might have been fixed in updated patch,the same you copied then that particulr function will not work in the lower patch and the BLS will come with errors.
Hope this helps you.
-Suresh
Edited by: Suresh Hiremath on Jan 7, 2010 12:11 PM

Using one Windows 7 64-bit Disk to install on different machines with different licenses

I have Windows 7 64-bit full install disk that I purchased when I built my system. Obviously it came with its own key, which I installed on my custom built system. I recently purchased a Dell Optiplex GX620 computer that I want to use as an
HTPC. It came with Windows 7 64-bit installed. Both of these Windows are 7 64-bit Home Premium. Unfortunately, the Dell has only got an 80GB HDD. I want to upgrade to a 1TB. I also want no problems with the Windows so don't feel
comfortable doing an image from the 80GB to the 1TB, so I want to do fresh install of Windows 7 64-bit. The Dell came with a Windows 7 license key sticker on the side. My question is: Can I do a fresh install of Windows 7 64-bit on the Dell
with the new 1TB HDD using my Windows 7 64-bit full install disk and the license key on the side of the Dell computer and activate it with no problems?

Q. "Can I do a fresh install of Windows 7 64-bit on the Dell with the new 1TB HDD using my Windows 7 64-bit full install disk and the license key on the side of the Dell computer and activate it with no problems?"
A. Yes, but you'll likely have to "activate by phone".
Carey Frisch

Catalyst 2960s Stacking with different IOS versions

Hello Forum Team;
When adding a new switch with older ios version to an existing stack (flexstack) does the new switch will be able to join the stack?
Thanks in advanced!

Hi,
In a stack/flexstack all the switches should have exact same IOS version, otherwise there will be a version mismatch on the stack and the new switch will not be able to join the stack.
The following Document contains more info:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/white_paper_c11-578928.html
Thanks
Ankur
"Please rate the post if found useful"

How to get two syslog resources with different filter levels into ASA

Hi All,
I have my ASA's set up to push logs to my syslog server:
logging host inside 198.xxx.xxx.185
logging trap notification
However, I would like to also trap if a VPN on my ASA's go down, but I want to send that to my SNMP server, NOT my syslog server. I also want to only trap that VPN log message and nothing else, so I want to set the filter level to emergencies:
logging host inside 198.xxx.xxx.16
logging trap emergencies (+ system message 123456)
How can I configure my ASA so that these two syslog destinations will have separate respective filter levels of notifications for .185 and emergencies for .16?
Also, does anyone know the System Log Message ID for a VPN tunnel going down?

Dear Ronny,
i am gining the solution below.But would request you to change your ITAB STRUCTURE LIKE THIS BEFORE USING THE CODE
VERME LGPLA
252.000 EA 300 0149A 0149 410
276.000 EA 300 0149A 0107 410
516.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
528.000 EA 300 0149A 3013 400
then do as follows.
SORT ITAB BY LGPLA VERME.
LOOP AT ITAB INTO WITAB.
W_INDEX = SY-TABIX.
here take all the abOve fields in temp fieds.
LW_VERME = WITAB-VERME..AND SO ON.
AT END OF LGPLA.
   MOVE: all LW fields to work area of ITAB1
   APPEND work area of ITAB1 TO ITAB1.
   DELETE ITAB INDEX W_INDEX
ENDAT.
ENDLOOP.
Basically what u r doing here is thet u r using processing event.
So whenerv VERME changes this event will be triggered.
Just try this out...something like this only will be he logic.
Please let me know further

SW-3850 stacking with different License Levels?

Similar Messages

Maybe you are looking for