SW ATE Developer - Clifton, NJ

Hi Everyone,
I have an opportunity at a company, who specializes in advanced military/space products/equipment, that could be a good fit for you. I’ve copied the details below.
Please let me know what you think!
I’m looking forward to hearing from you.
Thanks!
Nick Vella
Protingent Staffing
Technical Recruiter
www.Protingent.com
http://www.linkedin.com/in/nickvella
Main: 415.683.3133
Toll Free: 877.397.4975
Cell: 415.404.0870
Job Description:
Candidate will be a key member of the test engineering team responsible for the design and development of test software in TestStand and LabVIEW. Duties include developing test strategies, test documentation/procedures, and product testing support. Candidate must have a strong electrical background. Applicant will be subject to a security investigation and must meet eligibility requirements for access to classified information.
Required Skills:
Position requires a BS degree in Electrical or Computer Engineering.
5+ years recent experience with LabVIEW 7.1 or above
2+ years developing Test sequence in TestStand
5+ years of experience developing automated software applications for Test and Measurement instruments in a Test Equipment environment.
- Security clearance is a plus - the ability or obtain a security clearance is a must
Daily Task:
Support the completion of existing Automated Test System (19" rack based systems) for radio communications...

dear sir
presently i am working on ATE with HT basic.
i am interested to apply this job.
for further please find the attached resume of mine.
Attachments:
savan_parekh.doc ‏148 KB

Similar Messages

Consulting service - CLD/CTD developers

Entwine Software & Systems Inc. provide consulting services for clients seeking LabVIEWdevelopment, FPGA, ATE development using TestStand and LabVIEW, Python development.
We have certified LabVIEW and TestStand developers. Experience in Test and Measurement, Process control and data analysis using LabVIEW and related tools of more than 10 years.
Please feel free to contact for any questions and needs.
Regards,
Entwine Software & Systems Inc.
[email protected]
www.entwinesoftwaresystems.com
CLD,CTD

Hi ken,
Kindly let me know if the position is open for non residentials of USA as well, so that I would prove my skils. I wish I can be in your team.
Thanks,
Teja.

LabVIEW v/s C Programming Language

Sorry i posted in wrong location.
Hello All,
My company is going to develop Automated Test software for particular boards.
They are asking me which one is better one to take for ATE development either LabVIEW or C Language.
Now i have to provide them a proper reasons to using LabVIEW in sptie of C language.
Below are some reasons which i got myself:
1-Easy to develop and debug code.
2-Easy to interact with different hardware interfaces.
So, Please let me know more reasons for using LabVIEW.
Best Regards
Puneet Kapoor
Message Edited by puneet.kapoor on 06-30-2008 05:04 PM
CLA 2014
CCVID 2014

Things than can be done more efficiently in C may be imported to Labview via DLL (some hardware interfaces for examples)
LV 8.2 at Windows & Linux

VXI Resource manager problem

I have the following configuration:
VXI-PCI system (National Instrument 777119-32 VXI-PCI 8015 interface kit +
National Instrument 777178-01 mainframe extender.)
One PC.
Two VXI cages.
In the first VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 1.
In the second VXI cage at slot 0, I installed NI zero slot controller,
configured to logical address 2.
The VXI cages are chained using MXI-2/M3 cable.
In the first VXI cage at slot 1, I installed a RACAL Instrument (1260-35
with option OPT-01T) that also needs a logical address, configured to
logical address 3.
In the second VXI cage at slot 1, I installed a RACAL Instrument device
(1260-45 with option OPT-01T) that also needs a logical addre
ss, configured
to logical address 4.
Running the Resource manager with only one RACAL device in either cage -
result OK (logical addresses 1,2,3 or 1,2,4).
Running a full system result - FAIL with the message "The device at logical
address 3 did not respond to the read protocols command.
The same problem appears if I configure the logical address of the OPT-01T
to 255 (auto assign logical address).
Please advice.
Thanks
Eli Nachumzon
ATE Development
Engineering Dept.
ADC teledata
Tel: +972-9-9591453
Fax: +972-9-9591805
E-mail: [email protected]

Eli-
I just noticed this unanswered question. I am guessing you've gotten your answer from another source by now, but in case anyone else has similar issues, I recommend our Logical Address Wizard, which helps configure multi-chassis MXI systems. Your case illustrates a common mistake when assigning LA's; having your two VXI-MXI-2's at LA 1 and 2 will not work. According to the LA Wizard, a combination like LA 4 (containing an instrument at LA 5) and LA 6 (containing an instrument at LA 7) would work.
-Scot

Labview Automated test engineer in HCL 3-5 years,India

Dear All,
We have urgent requirement for Labview test engineers in HCL pune and chennai. Experience 3-5 years. Please send me your cv to [email protected]
Note: freshers will not be cosidered .Min exp-3 years. Knowledge of NI hardware is mandatory.Notice preiod and salary negotiable

Hi,
I am Sameer kargirwar.I have 5 years of experience in ATE development with labview.If you find my resume suitable for above post, Please contact me at [email protected]
regards,
Sameer kargirwar (9028309973)
Attachments:
Sameer resume.docx ‏30 KB

LabView ATE Test Developer

Required:
* Labview experience (3 year minimum)
* ATE experince
* Working experience from a test group (5 year minimum)
* M.Sc.EE or similar.
Preferred/strong plus:
* Experience designing tests from a datasheet
* Experince with statistical analysis of test results (yield analysis)
* Background in chip testing
* HP/Agiline Smartest knowledge/experience
Start: ASAP (Jan/Feb-06).
Duration: 12-18 mo. Full-time on-site.
Location: Denmark.
Hourly rates: EUR 50-70.
I need CV asap. Direct contact: ro (at) axcon.dk.
Read more about Axcon on www.axcon.dk
BTW: Also looking for HP/Agilent Vee programmers.

Mit CV for stilling er her.
Med Hilsen

Error while connecting to ATE DecryptPasswordError "Key does not exist",,,

Dear All,
While trying to implement Syclo Service Manager with SAP CRM , I am trying to start the ATE (Agentry Test environment) on Windows after getting connected to the development server. However, I am getting the below error after I give my user ID and password on ATE login pop-up.
DecryptPasswordError <"Key does not exist",,,>
It initially says that the password is incorrect and asks if we would like to connect to the server instead. When I click on "Connect", the above mentioned error is displayed.
Can you please help me with this. As a matter of fact, in the past, I have been able to connect to ATE without any issues, but not sure what could be the problem this time.
Any quick help is highly appreciated.
Regards,
Ashish Dhagat
Tags edited by: Michael Appleby

Hi Ashish
Without seeing the rest of the logs, I'm assuming you are getting some kind of logon error.
If so, this error can happen if the the Agentry Server fails to load the "cryptography context and key container". This can be found by viewing the Startup.log files located in the LOG folder in the running Agentry Server folder.
The following is an example of the Startup.log:
     05/05/2009 12:50:55, 0, 0, 2, Thr 2120, Key container does not exist, attempting to create a key container.
     05/05/200912:51:02, 0, 0, 2, Thr 2120, Failed to acquire cryptography context and key container. 05/05/2009 12:51:02, 0, 0, 2,
     Thr 2120, Error 2148073487 loading cryptography key
This issue is caused by the User that started the AgentryServer.gui (or LOCAL SYSTEM if running as a Service) which means the user does not have access to the MachineKeys folder. The user needs to have full access to the following folder:
               C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\MachineKeys.
If running as a Service, the user should confirm the logon account.
To change the Logon account from Local System Account to 'This Account' option (needs to be an admin account):
Go to Control Panel->Administrative Tools->Services.
Right click on the appropriate service and select 'Properties'
Select the tab 'Log on'.
Click the radio button next to 'This account'
In the field next to 'This Account', enter ID used for logging into Windows (admin account)
In the Password and Confirm Password fields, enter password associated with the Windows login ID
After verifying that the user has full access to the folder, restart the Agentry Server, and with a cleared client, connect to the Server.
Let me know if this helps.
Thanks,
Ray

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Work Manager 6.1 not rendering on ATE iPad

Hi,
Working with Work Manager 6.1 I find the screens aren't rendering for a number of platforms in the ATE. For our current project we are using the iPad screenset but when testing via ATE the screens don't display the data (All the objects are downloaded correctly).
I couldn't find any SAP notes covering the problem.
This makes it difficult to test rules and actions because many are in screens the need to be accessed by drilling into objects. Since the data isn't visible you can't drill into the required screens.
1. Is this a known issue? If so are there plans to fix this?
2. Are there suggested workarounds?
Currently we're using 2 approaches -
a. Temporarily make the rule/action available on the main screens so they can be triggered and debugged.
b. Make the rules/actions available in the Pocket screensets and trigger them from there (Currently only the Windows CE Pocket PC Portrait platform seems to render correctly)
After successfully testing the rule/action, then remove the temp change. Both approaches can be time consuming and fiddly to implement so it would be much better if ATE just rendered the screens properly.
3. Is it possible to increase the tracing for the other Agentry Clients e.g. WPF or Agentry SMP logging so it can output trace information about rules/actions?
Development Environment -
ATE Version - 7.0.3.605
SMP Platform - 3.0.3.2
Cheers,
Stephen

Hi Michael,
My clients are below -
WPF Agentry Client - 7.0.3.605 (this renders correctly shown below)
SMP Platform - 3.0 SP03 PL02 (Not sure where to find the Agentry Sever version embedded in SMP)
ATE - 7.0.3.605
The ATE / Agentry Clients have been downloaded/installed using SMP SDK 3.0 SP04
Searching SCN I found the questions below which state that rendering in the ATE for iPad doesn't work for Agentry 6.1.x. I want to understand if this still applies for v7.x
SAP Work Manager App not displaying in ATE and iPhone
Improper screen in the Ipad and iphone platform in ATE V6.1.0.3
Cheers,
Stephen

WLI Developer/Architect needed in Tampa Florida..Long term project

Please let me know if any one interestjaied...email me at
[email protected]
Thanks

Hi,
Good experience in ATE projects with lab view, OPC,Ethernet,Modbus.Client server technology for data hand shaking between Lab view and Sql,Oracle. In above I have a 8years experience in this automobile field for project design, development and proving.
Hope , waiting for positve reply

LabVIEW Developer - Eastern PA

Coleman Technologies, Inc. (www.colemantech.com) is looking for an exceptional, highly motivated, individual to fill an immediate opening for either full time employment as a LabVIEW Software Developer or alternatively, work on a mid-term contract basis. Coleman Technologies is a certified National Instruments Alliance Partner and leading custom LabVIEW™ application/system developer in the mid-Atlantic USA (PA, NJ, DE, and MD). The position requires the applicant to work at our Chadds Ford, PA offices.
The duties include:
Design, develop, and install custom applications & systems incorporating a wide variety of technologies (DAQ, machine vision, ATE, motion & real-time control, etc.) for a wide variety of industries.
Maintain systems and applications already in the field including modifications to existing LabVIEW applications.
The ideal candidate would possess the following skills & qualifications:
Well developed analytical skills and the ability to quickly learn new technologies
Intermediate-to-advanced knowledge of LabVIEW (a pre-employment test is required)
Broad technical knowledge spanning a wide range of application areas
Excellent writing, communication (English), management, and interpersonal skills.
Ability to work both alone and with colleagues
Discipline and organization with respect to software development and maintenance.
BSEE, BSME or BS or an advanced degree in Physics, Chemistry, Engineering or another engineering/scientific field.
CLD certification is not required but would be beneficial
Candidates must be either a U.S. citizen or already legally working in the U.S. No visa sponsorship is available for this position. We are not accepting applications from offshore candidates.
Pay is commensurate with skills and qualifications of the applicant. Compensation will include a competitive salary and significant performance based compensation. Benefits include generous health and retirement plans. Email resume to [email protected].

Coleman Technologies, Inc. is again seeking applicants for Junior and Senior level full-time Developers. See our previous post from 2009 for details.
***Applicants must be US citizens or already working in the US with a valid visa.
Please send resume to [email protected]

SAP IM 4.0 in ATE

Hi All,
We have installed SMP 3.0 and we have configured SAP IM 4.0 also. When I am running the application in ATE, I am not able to see any button like we can see the buttons for SAP IM 3.2 ATE.
Do we need to add those buttons manually in all screens wherever required? or Are there any settings we have to change?
--Shyam
Message was edited by: Michael Appleby

Shyam,
You can still use the ATE for testing/debugging in PPC (WinCE) mode with IM 4.0. You should be using the WPF client for Windows production use.
Jason Latko - Senior Product Developer at SAP

LabVIEW /ATE Engineer

I have an opening for
an ATE Engineer with Labview. If you
are interested please forward your resume to me at [email protected] . Thank you for your time.
CLA 2014
CCVID 2014

Hi ,
Punit
I am Brijesh patel.
I am CLAD, I am Working With Nutron Systems(Ahmedabad).
We have developed custumise SCADA application using Labview (We didnt Used DSC module) But we developed Such kind
of Scada. Which can aquire data using serial , TCP/IP protocol. As back hand we used Exel as well as sql.
Brijesh Patel
Brijesh Patel
Application Engineer,
Nutron Systems,
Ahmedabad

SMP 3.0 Development Landscape - Error 14

Hi All,
I followed this blog to set up my SMP 3.0 Development Landscape:
http://scn.sap.com/docs/DOC-56329
Everything seems good to me. I was able to deploy Work Manager 6.1 base app on the SMP 3.0 Server and the startup logs had no error.
I have installed both the SMP Server and ATE on my laptop.
When I try to access the URL: https://localhost:8081/SAPWM in Chrome, I get this message:
The site's security certificate is not trusted!
You attempted to reach localhost, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system.
But when I click 'Proceed Anyway' - I get the 'I am here!' message.
The problem I am facing is in ATE - When I give https://localhost:8081/SAPWM in the Server in ATE, I am getting a Communication Error 14 message. I even tried given my FQDN of my laptop in that URL. It didn't work.
I am not sure what exactly can be the issue. It might be something to do with the certificate. I followed what was mentioned in the blog.
Regards
Ankur
Tags edited by: Michael Appleby

I installed the certificate as described in that blog under Trusted Roots.
now when I access the URL: https://localhost:8081/SAPWM in Chrome, I get this message: You attempted to reach localhost, but instead you actually reached a server identifying itself as <<my computer's FQDN>>.
And in ATE now I get this error:
Requesting Public Key from Server
Connect to server 'localhost', certificate is for 'my computer's FQDN', so it is not valid
Communications error (14)
Connection failed
Ending transmission

ATE does not display SAP Inventory Manager 4.0 screens properly

We're implementing SAP Inventory Manager 4.0 running on SMP 3.0 SP3 PL3. Testing the application in Agentry Test Environment is not possible as screens do not get rendered properly regardless of the platform selected. We've tried with multiple versions of ATE from SMP 3.0 SDK SP1 through SP4. None of those works. Because no buttons are rendered there is no way to interact with the app in ATE.
Could some prerequisites be missing? We've tried on a Windows 7 machine as well as the SMP server itself (Win Server 2008) getting the same exact results.

Lukasz,
Win32 screens were removed from the newest IM release because the WPF uses Tablet (iPad) screens. You can test in the ATE using the PPC screens by making a change to your screensets.ini file that sits in your application directory. We use this trick in product development to test using ATE:
Change your Win32 section in screensets.ini to be as follows:
[Win32]
1=PPC
After bouncing the server, using the above will allow you to debug the PPC screens. We do this for all our testing.
Jason Latko - Senior Product Developer at SAP

SW ATE Developer - Clifton, NJ

Similar Messages

Maybe you are looking for