Swalife websight doesn't operate correctly on one of our computers and works fine on the other

We have two Dell laptops. For explanation of this problem, I will refer to them as #1 and #2. I have used Firefox on #1 for 3 years now. Our other computer, #2 has been using IE, but because of IE issues, we decided to switch it to FF also. It is necessary for us to use swalife.com website for work. When I log in to swa life on #1 it works fine as it always has. We downloaded FF 18.0 on #2 and the swalife site only has partial functionality. We can log in to the site on #2 and it recognizes the names and passwords, but will not open the default opening page. The default page has 4 tabs, news, need to know, swa pics, and profiles. The only tab out of the three that works correctly is the need to know tab. The other three have a window that opens that displays the following message:
This Connection is Untrusted
You have asked Firefox to connect
securely to blog.swalife.com, but we can't confirm that your
connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
blog.swalife.com uses an invalid security certificate.
The certificate is not trusted because no issuer chain was provided.
(Error code: sec_error_unknown_issuer)
Yesterday I contacted Norton security. They took control of #2 and said that it wasn't a security problem and that they couldn't fix it. He suggested using Chrome, since swalife.com operated fine with chrome on #2. That is not the solution I wanted. We also contacted Tech Support at swalife and they had no idea what the problem could be. My question to you is...if swalife.com operates correctly on#1 with FF18.0, why can't #2 operate on FF18.0? Both computers are in the same room, using the same router, and are on the same Insight cable connection. I have checked and compared security settings on both computers and both appear to be identical. Please note, that in the Untrusted window it says that "You have asked FF to connect securely to blog.swalife.com but we can't confirm that your connection is secure." We are not asking to connect to blog.swalife. We never use it. The site sends us to this window directly from the log on page.
Please Help
Larry Krauss
[email protected]
614-448-8035

The blog.swalife.com server doesn't send a required intermediate certificate.
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
You can Copy and Paste the certificate text of the intermediate certificate (COMODO High-Assurance Secure Server CA) to a .cer text file and import the certificate in the Certificate Manager or use Firefox > New Tab > Open File.
DO NOT set any trust bits, those are only required for root certificates and should never be set for intermediate certificates.

Similar Messages

  • We have 2 locations using formscentral one location is working fine but the other location is experi

    We have 2 locations using formscentral one location is working fine but the other location is experiening slow response (up to two hours) or the form not displaying? What should be looked at?
    Thanks
    Carleen

    Can you describe what you mean by "experiencing slow response"? Do you mean that you don't see the new responses as they come in? Does it takes up to two hours before they show up in the View Responses table when they show up immediately at your other location? And what do you mean but "the form not displaying"? Are you talking about the fillable form or the editable form in FormsCentral?
    Can you please add me as co-author ([email protected]) of the form so that I can investigate on my side.
    Instructions on how to share can be found here : http://forums.adobe.com/docs/DOC-2462
    Gen

  • I have two ipod nanos.  And i have 2 itunes accounts and we are accessing both accounts from the same PC.  One of my ipod works fine, it gets detected as a device and sync fine.  The other one does not.  Need help.

    I have two ipod nanos.  And i have 2 itunes accounts and we are accessing both accounts from the same PC.  One of my ipod works fine, it gets detected as a device and sync fine.  The other one does not.  Anyone knows what this may be?

    The music sync is one way - computer to ipod.  The only exception is ituens purchases.  The ipod is not a backup device.
    Copy everything from the old computer or your backup copy of your old computer, to the new one.

  • Attachment won't open on one iPhone, but works fine on the other. Why?

    2 iPhones with the same iOS version receive 1 email with an attachment from an Outlook user: one iPhone can open the attachment, the other can't (it only shows as winmail.dat). Why is this and how can I get it to open? Thanks!

    He advised me to 'back up' everything and 'reformat' the computer.
    I have been looking at how to do these tasks - not 100% on both.
    The quickest way to do this is to create a clone copy of your existing internal Macintosh HD. You can create this copy using applications like Data Backup, Carbon Copy Cloner, or SuperDuper!.
    I use an external USB HDD for the clone copies.
    The following AppleInsider article will give you an idea on how to use Carbon Copy Cloner to make a clone backup of your Mac's hard drive.

  • Mail settings on one computer not sending, works fine on the other

    I checked all settings against the working computer (Macbook pro), but still on the G5 is says "can't send through that server."
    I've spent time on the phone with support, changing ports, etc, to no avail.
    So would archive and install do any thing?
    And, if not, what would?
    Thanks

    John,
    You have a modem and router, and the G5 is connected to the router via an ethernet cable -- correct? Do you have another cable to test with?
    On the G5, open Connection Doctor -- what does it say about connecting to the SMTP?
    Ernie

  • Why when i go on icloud i only find one of my ipods and i cant find the other and they have the same apple id?, Why when i go on icloud i only find one of my ipods and i cant find the other and they have the same apple id?

    i need help

    See:
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    Does the one iPod find itself in the Map apps?

  • I have recently replaced one of our computers and it is using Windows 7 as the operating system. Firefox does not seem to be able to size itself to different screen resolutions.

    The recommended resolution for the Windows and Microsoft programs is 1600 x 1200. Windows and the Microsoft Office suite programs appear in a workable resolution. However, Firefox is so small at this resolution that it is hard to work with. If I change the resolution to 1024 x 768, then I am able to use Firefox as in the past, however, the Microsoft Office Suite programs and other browsers are much too large to use. Any help with this problem is greatly appreciated. Thank you, Lee Porter

    The 192.168 prefix suggests that you are on a home network. It is possible you're internal IP address changed from 1 to 2 (or whatever). Buried in the db_1 folders is that folder you mentioned. I made a copy of it named localhost and then everything worked.

  • My iPad 2 touch screen will not work. The screen is currently locked. The sliders work, but the number pad doesn't! My screen was shattered months ago, and worked fine until recently. I need to delete confidential info before replacing the glass. HELP!

    Again, everything worked perfectly until about two days ago. Out of nowhere, the numbers on the unlock screen stopped working. The sliders still work, the photo button still works. I've tried reseting it multiple times, and powering it off multiple times as well! Any help would be very helpful. It needs to be fixed as soon as possible for a private buyer. Thank you!!

    Have a read at all this, including the links. I personally would then proceed in this order.
    Open iTunes on your computer. Connect your device (iPad or whatever) to the computer.  Hold both home and power buttons for exactly 10 seconds, release the power button, keep holding home button until your device recognises it is in Recovery Mode. (Perhaps 10-20 seconds.) If the device screen is black (blank) then it is in DFU Mode.
    See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
    http://support.apple.com/kb/HT1808
    Unresponsive iPads
    http://support.apple.com/kb/TS3281
    http://www.youtube.com/watch?v=OXlY-VcxbCU&feature=youtu.be

  • How to deactivate one of our computers that has been destroyed by a tornado.

    I have one computer that I have the cloud on and works fine but my other computer got sucked up by the tornado. How do I deativate a computer I don't have in order to put it on a new one.

    Hi gleason1012,
    I have checked & found that it is already installed on two computers as you have mentioned.
    To use it again, please download the CC on the new computer & try to activate it, when you try to activate, it will give you a prompt to deactivate from previous installs or deactivate both the install from this new activation on the new computer,deactivate it from here. it will deactivate both the computers including the one you have for the works.
    Now activate it on this computer, for your previously installed computer, reactivate it by:
    1. log out of the CC Desktop App & log back in
    2. Launch any product & "license the software" & sign in, it will reactivate.(Follow these steps in the old work computer)
    Regards,
    Rajshree

  • I've got a serial number for Contribute but it won't activate on one of our computers. Right now we have to use the 30 day trial. Why doesn't it work?

    I've got a serial number for Contribute but it won't activate on one of our computers. Right now we have to use the 30 day trial. Why doesn't it work? Marianne Stanton, The Inquirer and Mirror, Nantucket, MA: Sign in: [email protected]

    Here's the serial number I have and have used on other machines:
    < Removed by Moderator >
    "This serial number is not valid for this product."
    OS 10.7.5
    Contribute 6.5
    Greg Derr
    <Removed by Moderator>

  • I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

    I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true.  . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . .     STACK: / [    -mark-   /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

    Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
    Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
    Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

  • One of my fans is very loud, while the other one is fine, is this an issue?

    One of my fans is very loud, while the other one isn't, is this an issue?

    Hello there, Snake97.
    The following Knowledge Base article provides a great step for fans running at full speed:
    iMac: Fans run at full speed after computer turns on
    http://support.apple.com/kb/ts1433
    In order to correct the issue, reset the SMC. Your iMac should now start up and operate as expected.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

    I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

    Hello david,
    that's correct. Cloud software can be installed on Mac and/or Windows for no extra cost. No platform swapping process is required.
    On the Mac simply sign in to creative.adobe.com with your Adobe ID and download the software. Same as you did on the PC.
    Hans-Günter

  • I downloaded a movie on one of my computers, and yet I can't see it in my purchases and I can't download it on any other devices. Any suggestions?

    I downloaded a movie on one of my computers, and yet I can't see it in my purchases and I can't download it on any other devices. Any suggestions?

    Films will only show in your library if you've downloaded it on that computer or copied it from another computer. You checked the Purchased link under Quicklinks on the right-hand side of the store homepage to see if it shows there for redownloading on that computer
    If it doesn't show there then you can copy it over from the computer that you downloaded it on e.g. via home sharing : http://support.apple.com/kb/HT4527 (that page refers specifally to music, but it works for other content types as well).
    Or you can right-clidck (control-click on a Mac) on the film in the iTunes library that it is on and select 'show in explorer' ('show in finder') and copy it to, for example, a flashdrive, and use that to copy it onto the other computer's iTunes library (File > Add To Library)

  • I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

    I have a spelling app that is stuck on the screen - it doesn't have any way to close it out, and when I split the screen and go to "Finder" to remove it, it says that it can't, because the program is still open. Please help.

    Paul,
    I'm sure this is the correct answer, but just switched to Apple, so am just an apple seed at this point! :~)
    How do I get to the Apple Menu?
    Thanks!
    KL

Maybe you are looking for

  • AT commands appearing in sent message

    Hi guys, I am using AT commands to send SMS from my computer using a java program. When I send a message, the recipient receives the message but with additional AT commands embedded that were used on my side to send the message. What do I need to do

  • AE CC not rendering, chronically slow on start up, quicktime not installing, all on a trial copy

    I have just downloaded AE CC trioal on to my new iMac. on boot up it is chronically slow, but eventually it loads and shows a warning of no quicktime loaded...... looked at a discussion here saying to remove  file to trash , but this file doesn't exi

  • Media in the timeline says it needs to be connected, but it plays fine.

    Hey guys, I'm using Final Cut 7 and today I had to disconnect my external drive that has the project I'm currently working with on it. When I reconnected the drive and opened up my project ,some of the clips in the timeline where there is usually a p

  • Re:addition of fields in selection screen1

    i want to add two fields in selection screen and fetch the correponding pernr(field in vbpa i.e personal number) based on these two partner functions. these two are partner functions are Service Representative ZQ Customs Representative ZG. i want log

  • HT1918 Trying to update my payment info

    Hi there, I'm am trying to update my payment info and trying with two differents credit cards cards and that info I've been adding is correct but I keep getting a message that the credit cards info is wrong.  What else is to do?