Swap fields in Premiere Pro CS4

How can I do "Swap fields" to a progressive video in Premiere Pro CS4 (4.2.1)? There is Project tab / right click video file / Interpret Footage / Field Order, but that only either does nothing to the progressive scan video or apparently converts interlaced to progressive, in which case my video goes very blurred and bad quality since it's not correctly processed.
So, my video is .avi MJPEG, incorrectly defined as "interlaced" in the headers and incorrectly having the field order swapped even though there are no real fields since it's progressive. It's saved by Blackmagic Intensity Pro capture card, no processing done yet.
I'm just looking for a simple swap fields function for Premiere, but can't find it anywhere. At export stage is same or similar to that Interpret Footage place, I can't swap fields but just basically destroy my video.

HDV is MPEG2 and capturing is only a tranfer of data, nothing more.

Similar Messages

Does Premiere Pro CS4 really support Vista 64-bit?

I have installed Premiere Pro CS4 on my Vista 64-bit server and recognized in the task manager that Premiere is listed as a 32-bit application "Adobe Premiere Pro.exe *32" which makes me wonder if Adobe's statement given in the FAQ is correct, where they say "Adobe Premiere Pro is optimized to run on 64-bit systems. The key advantage of 64-bit systems is that they can use up to 64GB of RAM. Adobe Premiere Pro CS4 can use large amounts of this memory because it splits different tasks into separate processes."
Am I executing the correct Premiere Pro EXE-file (the application itself works fine) and is that 32-bit application able to make use of the fully available RAM space (which is 8 GB on my system)?

Well great for you Harm, but this problem has me stumped. I've been troubleshooting NLE systems since my Pinnacle DC30 Premiere 4.2 system.
I'm looking for a solution not to start a fight so if anyone has confronted similar problems and found a fix, please reply.
FYI, Adobe has made it clear that Premiere CS4 does not support daisy chaining decks or any other 1394 devices, but this is not my problem.
"Adobe Premiere Pro CS4 doesn't support multiple devices on a FireWire chain or multiple devices on a FireWire card."
Above quote copied from this Adobe support document http://kb2.adobe.com/cps/405/kb405744.html
I'm not working with DV I have been shooting in 720P on a Sony PVW EX1 if that even matters.
Can you explain why my external array works well with XP fairly well with 32 bit Vista? It's an ASUS P5E Deluxe motherboard. This is not BS, I have a long list of Microsoft case numbers and it is REAL pain having to explain to someone in India the problem over and over again. I've been told by the array manufacturer SimpleTech ProDuo that it should work with the OS drivers. The Internet forums for other 1394 devices have many instances of 64 bit Vista incompatibility. The same problems I'm having with the same OS just different devices. What's really weird is how it will work fine like today, it's back to normal. I have had this system working perfectly then overnight the array vanishes in my computer but shows up in device manager with an error. Then a few hours later without changing anything, it starts working again, very intermittent. As usual, it will fail when there's a deadline.
I've run Avast antivirus, Malwarebytes and Spybot. Swapped cables,defragged drives, updated MB bios and software looked everywhere for solutions.
The MB Manual is found at http://support.asus.com/download/download.aspx?SLanguage=en-us
I can transfer content to my internal array but I'm trying to optimize a workflow that starts by shooting on SxS cards on the PVW EX1 and transferring them to the array in the field with the 32 bit Vista laptop and making rough cuts. I keep the project files on a USB drive. Then transfer the array and USB drive to the 9450 quad desktop system in the studio for final editing. When I get this to work, it's a real time saver. But transferring files to the internal array is possibly the only dependable solution for now.

Slow Playback in Premiere Pro CS4 (how do you lower preview res?)

Hi everyone, I was just wondering how to lower the playback/preview resolution while3 editing in Premiere Pro CS4? I'm editing 720p video (.mov format, that's what my camera shoots in, so I don't think I can change that). All I can see when I right click the source monitor is "Quality > High, Draft, Automatic". Is there anything else I can select? (kind of like in after effects, where you can set it to 1/2, 1/4, etc.). I've been searching the internet for the better part of the day and all I've found is that 'quality' menu I mentioned earlier.
It's still painfully slow to watch on 'draft', and it doesn't look like it makes that much of a difference in quality. Now, my laptop isn't exactly the rendering beast I'd like it to be, but it can handle 720p [slowly] in after effects so I think it should work in premiere too.
Thanks!
PS: Any of you experts think this would be a good computer for NLE / rendering effects?
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259&Sku=B69- 1277

Thanks for clearing that up!
New desktop it is... I'll probably be swapping out the low power drive for a faster one, since Harm mentioned that in his 'building for NLE' thread.
Oh yeah, one more thing: How can I force it to render? For example, I put an HD clip into the timeline, it has a yellow bar along the top of the timeline in it's location, yet when I hit enter it just plays (with annoyingly low fps)?? Going to sequence > render effects in work area doesn't work either.

Premiere Pro CS4 Functionality Questions

Hey everyone,
I've been thrown onto a Project which is using Premiere Pro CS4 (we have been using Roxio VideoWave), and have some basic questions I'm hoping someone can answer (I'm no expert in the video editing software field):
1) in Video Wave, I can easily add photos and movies to a project just by dragging and dropping from Windows explorer. In Premiere, it seems the only way I can add photos and videos to a project is to import the media, and then drag them from the "project library" to the timeline. Is there a way to drag and drop a photo directly from Windows Explorer into a Timeline? If so, please tell me what basic step I'm missing. :-)
2) Is there any way to preview what a transition will look like before actually adding the transition to the movie?
3) When I add a video/photo from the project library, I have to hold the CTRL key to have it to a "ripple" insert (eg, push everything else in the timeframe out). Also, I have to hold the CTRL key to do a "ripple trim". Is there any way to set these actions as the default so I don't have to hold the CTRL key down for these?
4) Lastly (for now :-) ), in Roxio Videowave I could easily edit the volume of a sound clip in the timeline just by clicking on the middle line going through the sound wave and dragging it up or down. I can't seem to figure out if there's a similar easy way to do it in Premiere Pro.
Any help appreciated! Again, sorry if these are basic stupid questions, but Premiere is currently way above my level of experience.
Thanks! :-)

1) Is there a way to drag and drop a photo directly from Windows Explorer into a Timeline?
In Premiere, no, there is not--at least not from Explorer itself. You need to import the files first (you can drag and drop them into the Project panel/bin), and then edit them into a sequence. However, you might try out the Media Browser; go to Window > Media Browser if you don't see it. Media Browser will give you an Explorer-like interface that you can use to drag files directly from the folder structure on your hard drive into a sequence; when you do so, they will simultaneously be imported into the project.
2) Is there any way to preview what a transition will look like before actually adding the transition to the movie?
Nope; you just have to try them until you find one you like. Then memorize it
3) When I add a video/photo from the project library, I have to hold the CTRL key to have it to a "ripple" insert (eg, push everything else in the timeframe out). Also, I have to hold the CTRL key to do a "ripple trim". Is there any way to set these actions as the default so I don't have to hold the CTRL key down for these?
Nope; those are hard-wired. It'll become automatic for you after awhile.
4) Lastly (for now :-) ), in Roxio Videowave I could easily edit the volume of a sound clip in the timeline just by clicking on the middle line going through the sound wave and dragging it up or down. I can't seem to figure out if there's a similar easy way to do it in Premiere Pro.
You probably don't have the volume or keyframe adjustments enabled for your track. Check the following screenshot:
You can select either "Show clip Keyframes" (which lets you keyframe other effects via the dropdown on the clip) or "Show Clip Volume" which shows just the volume effect. A yellow line will appear across the waveform; you can drag it up and down to adjust the total volume of a clip, or use the Control/Command key and click on the rubberband to add keyframes/nodes so that you can ramp the audio. You can also Control/Command click on a keyframe again to make it sprout handles so that you ease in or ease out the level. Note that you can also select the "Track" options, but that (as the name implies) adjust the level for the whole track and not individual clips.

Geotag support in Premiere Pro CS4?

Hi,
I have a new HDR-CX500 which supports geotagging of video. Can Premiere Pro CS4 display this information for imported video?

Pr does have the ability to store the coordinates in the metafile data though. What you can do with it though is just use it for sorting, filtering. One of the metadata profiles has the fields pre setup.

PREMIERE PRO CS4 CRASHES every time I try to export to media....

Import a file in whatever format (MPEG 2, MPEG 4, AVI, etc.), I add effects (or leave the file untouched) and then try to export it to MEDIA...Then Premiere Pro CS4 crashes giving me this error:
Premiere Pro has encountered an error.
[..\..\Scr\Component\ComponentFactory.cpp-119]
After pressing "continue" it brings another message:
Sorry, a serious error has ocurred that requires Adobe Premiere Pro to shut down. We wil attempt to save your current project.
I press OK and the Crash Report dialog box appears....
I installed Premiere Suite 3 weeks ago and I have never used this software before....Premiere has never allowed me to export any file...
My Lap Top has Windows 7 Ultimate - 64 with NVidia GT 130 1 GB video card, 8 GB of RAM, 1 TB of HD and 1920 x 1080 P display...
Any advice? or somebody who has had the same problem?
Thanking you for your time and courtesies in assisting me, please receive my best regards.
AZUARO

Have you just installed the software or applied
updates also?
Updates are needed for premiere as well as Media and other.......
Ciao
Giorgio

Premiere Pro CS4 "Export Settings" window does not show up.

Hello,
I've run into a new problem with Premiere Pro CS4. Basically, when I select "File > Export > Media" my Export Settings window doesn't show up. If I click on the Premiere window I hear the beeping sound and nothing happens, if I hit Enter the Export Data window pops up and then Media Encoder opens. So, it seems that my Export Settings window is still open but I can't see it and make the necessary setting changes. It does not appear to be minimized and I can not locate it on my desktop anywhere. This is really frustrating because I was able to see the Export Settings window just a few weeks ago when I was exporting my last project. I've tried changing my screen resolutions but that didnt reveal the Export Settings window.
Does anyone know what is going on here and, more importantly, how I can fix it? I am really stuck here and am working against a deadline. Any and all help is greatly appreciated!
-Ben

Ben,
THANK YOU!!!! For two days I have been struggling with the exact same issue. And of course it was simple to fix, if I had just thought about it. Thank you for taking the time to post your experience. I had tried all sorts of stuff trying to get everything onto my #1 monitor, with desktop & workspace resets, resizing my display, etc. After reading and printing your post,
Hitting ALT+Space,
Down Arrow,
Enter,
and then pressing the left arrow and watching my Export window slide into view, I was laughing so hard, that I was tearing up. It would have been a month waiting for my second monitor to get repaired to get to see what was still being displayed on this ghost monitor. Each week, I video and edit our church's service and then post three versions (Windows Media Player, Ipod-MP4, MP3 Audio) of it to our web site. I would have been four weeks behind were it not for your post.
Again, a BIG Thank You!!!
Tony Salso
[email protected]
Cedar City, UT 84720
Tony—Professional Digital Pictures
--Videographer and Webmaster
Red Hills Southern Baptist Church
Serving Jesus in Southern Utah
[email protected]
www.redhillssbc.org

Premiere Pro CS4 over remote desktop does not play sequence

Hi all,
I have been researching this issue over the internet but I have found absolutely no references to it:
I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
Any suggestions as to what this may be? Any help will be greatly appreciated!

I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software). I had a Workstation at work with Premiere Pro installed on it and all the source footage on it. I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely. You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
I hope this helps

Adobe Premiere Pro CS4 4.1.0 update not working!files wrong size too?

when i go to download Adobe Premiere Pro CS4 4.1.0 update it says that file size is 30.5MB but when it starts downloading it it says thats the file size is 110mb and once installed it wont let me import VOB files. Has anyone got a solution?
Thanks

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

Premiere Pro CS4 does not import EX1 files longer than 1 hour

I had to record a long speech and used a Sony XDCAM HD EX1 camera with a 32 Gb and a 16 Gb SXS cards. The speaker paused after 1h 26 min. I stopped the recording and waited until the green light that allows recording the segment came on. Later I recored smaller segments.
I copied all the recorded files to the PC hard disk ( Intel Quad Core 2.4 Ghz with 3.25 GB RAM with XP Proofessional SP3).
I used Sony Clip browser to watch the clips and all of them were perfect. Then I opened premiere Pro CS4 4.21 and I wanted to import this 27 GB file. In the media browser appeared only one mp4 file. All the short ones where imported normally but the big one freezed premiere and the only way to close premiere was with the windows task manager.
I checked again in the Sony XDCAM clip browser version 2.6 and you can see it perfectly. There was a detail, though: in the lower part of the preview window I saw 6 marks. When I checked the file in the disk, I found that the 27 Gb file was separated in 7 parts. Each of them was 3.51 Gb and the last one 2.5 Gb. That means that the file was cut in pieces that were less than 4Gb supposed max file lenght.
I tried many ways to import and no result. The I used the "export " of the sony clip browser. There is one choice that is "MXF for XDCAM HD". When I chose this item another panel appeared and showed a 1440 X 180 59.94i 25Mbps choice. I took it and after some time it created the 27 Gb file that I could import it normally with 4 audio tracks. But there is a drawback a "media concept" logo appeared to remeber to "buy" the program.
Anyhow, the question is: How can I import to Premiere CS4 a MP4 file created by a Sony EX1 HD camera whose lenght is more that 1 hour long ?
Thanks
Wolfgang

I think is the contrary because the clip browser copies all the foleders needed. I got this opinion from another forum that copies into Final Cut:
"My workflow is to create a hard drive folder for the project, then use Clip Browser to import the clips from the card. I review the clips, labelling them, adding logging notes, setting the status and putting in essence marks as needed (the number of characters available for the essence mark description is fairly limited). I then open FCP, create and save a new project then call up XDCAM Transfer. I select the project folder and it will pull in all the clips. I then filter for OK status, occasionally create subclips then import. The clips come over to the bin, with their names and with the essence marks converted to markers. Obviously there are backups taken - I've not mentioned them."

Premiere Pro CS4: 64-Bit App or Not?

I read in the new Premiere Pro CS4 specs that it was "optimized for use on Win Vista 64-Bit..."
Using that language, is Adobe saying it's still a 32-bit app, but will work fine on the Vista 64-bit platform? Would appreciate somebody clarifying that point.
Bill Buchanan
Buchanan Film Co.

Good Marketing.
Dave

Premiere Pro CS4 - editing video from GoPro video camera

I am having a problem trying to edit video from the GoPro camera in Premiere Pro CS4 (PP). Have not been able to get much help from GoPro - they just tell me to speak with Adobe. I think the video codec used by the camera is MJPEG (?). It won't play at all on the timeline. Interestingly it will in After Effects (AE) CS4 and if I export it out of AE as a Microsoft AVI file I can then play it in PP. However if I go straight to Media Encoder and import the clip and then try export the clip via ME as a Microsoft AVI the exported clip from ME won't play in Premiere Pro. I am confused. Does anyone know this camera, it's codec and why it just won't work when directly imported into Premiere Pro but it will when imported directly into After Effects. Any advise would be greatly appreciated.

Please see a post I made this morning under my screen name BruceERoberts .... details below
I just purchase Adobe Premiere Pro a few days ago - and subsequently updated it to Ver 4.2.1. A started a new project - I tried to import some video footage I just shot with a GOPro Hemet Cam while skiing at our local mountain. I can easlily see the clip using Real Media Player - or the Quick Time player. It is a 10.9 MB ... 7 second MPEG-4 movie clip. File name is "gopro0030.mp4"
I created a "bin" called video .... then right clicked to import the file. You can see the file name in the media browser. But the file would not import. I received this error message: "109C ImporterProcessServer.exe Application Error. The instruction at "0x05efcac" referenced memory at "0x00000014". The memory could not be read. CLick OK to terminate."
This is very frustrating - I just purchased the software - and it won't import a 7 second video clip! It did import still fotos with no problem. What can I do?
thank you for your attention to this.
Bruce Roberts, Vernon B.C.
March 14th 2010
System Info
MS Windows XP
Version 2002 SP3
Dell Dimension XPS
Pentium 4 CPU 3.4 Ghs
3.39 Ghz 3.00 GB of RAM

Adobe Premiere Pro CS4 4.0.1

An update to Adobe Premiere Pro CS4 will be available via Adobe Update Manager shortly. The file will also be available for download tomorrow (November 20) on Adobe.com, as will the readme (at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html). In the meantime, here is the text of the readme.
We're really excited about this update, especially considering we released CS4 just one month ago. To force an update, choose help --> find updates from any Adobe application. The AME update that releases with this update is required as well.
Important note: if you are using the Elemental Technologies RapiHD plug-in, you must update to the latest version in order to use Adobe Premiere Pro CS4 4.0.1. You can update the plug-in by visiting the Elemental Technologies web page: http://www.rapihd.com/?q=node/129
New in this release
- OMF export
- Final Cut Pro import
- Edit in Audition (Windows only)
- Surcode support
- AAF import and export
- High quality motion
- Third-party support
Notable fixes
- Attempting to trim locked tracks results in a crash (#1888355)
- Crash on Win and error on Mac when using Numpad-Asterisk keys to generate marker when
playing in Program Pane when Effect Controls pane is closed (#1890626)
- Crash when the Metadata panel is brought into focus when a DVCPro HD clip is selected
(#1884633)
- When a filter/search is applied in the Metadata Panel and then a different asset is selected, the
filter does not update (#1876954)
- Custom schema causes Adobe Premiere Pro to crash performing many basic operations,
starting with New Project (#1888938)
- Render of transition in imported EDL-based sequence fails; on Mac, causes application to hang
indefinitely, user must be force-quit application (#1873434)
- After ASND is saved, an effect is always ON if it turns OFF while playing (#1864978)
- Crash when attempting to load a project that contains a composition if headless Adobe
Premiere Pro is serving Adobe After Effects (#1871578)
- Exporting video as MPEG 4 will create a video file that imports at the incorrect length
(#1851063)
- Trimming both ends of a clip, then moving the clip will cause looped playback to be silent, or
only playback portions of the clip (#1868409)
- When exporting a timeline containing cuepoints, deleting a cue point via AME Batch-> Export
Settings, the cue point is still present in the output file (#1866690)
- Playing an audio-only file in the source monitor will cause the application to lock up (#1887330)
- Exporting any MT session as 24bit WAV leads to garbled audio Mac only (#1881684)
- Adobe Premiere Pro allocates too much memory and reads too much data from disk when
loading project files on the Mac (#1890579)
- With camera connected, opening clip from Timeline into Source and selecting File  Debug
results in a serious error (#1889197)
- Export to tape is active from DVCPRO HD sequences (#1863718)
- Application intermittently crashes when exporting a movie (#1868405)
- Render and Replace of offline clips takes over 20 minutes (#1885273)
- Application crashes when cancelling Normalize Audio Track dialog (#1887615)
- When an AVCHD clip is inserted into a DV timeline with Scale to Frame Size applied, rendered
previews of the clip show artifacts during Timeline playback (#1863988)
- Using scale to frame size in a timeline lowers output quality and softens detail and sharpness;
typing in scale attributes manually or using Adobe After Effects produces much better results
(#1527669)
- Multiplexed MPEG files exported to HD size and then imported back in to Adobe Premiere Pro
show up as 601 color space instead of 709 color space and hence the colors of the imported
files are off (#1852977)

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

Use of a capture board in Premiere Pro CS4

For several years I have been using Premiere Pro 1.5 with a Canopus Storm 2 capture card and drivers. It has been working fine for me. Actually I have been doing event video for about twenty years and have gone through a lot of Premiere progams. I went from VHS to S-VHS and then into Mini DV. I don't think I will be going to HD. However, like life, we need to keep up with some of the changes. So I have been considering upgrading to Premiere Pro CS4. I was told that Canopus is no longer working with Adobe and that now it is Grass Valley and they have their own editing software. They no longer want to let the user of their products use Adobe products. If this is so, then what type of capture card is working with Premiere Pro CS4? And what is the cost for my changing my system? At least a ball park figure. I just had a new OS put into my video editing computer and right now everything is screwed up. The Adobe Premiere Pro and Canopus seem to be working okay, but I am not getting anything out from my computer to my editing monitor and sound mixer. I worked all week on it and to no avail. For years I did event video and put out some fantastic stuff, now I just want to do some informational videos and nothing is working right. I am open for suggestions.

Okay Harm, that is part of the problem. Since I put in a new OS I can't get my video editing to do right. Nothing is showing up on my studio monitor that is hooked to the Storm 2 card and nothing is coming in to my Mackie 1402 VLZ Pro line mixer that is connected to a CREATIVE Sound Blaster Live card. I have done everything I can think of and nothing is coming out. I have everything hooked up just like it has been for the past five or six years. I downloaded all of my software - Previere Pro first and then Canopus and then Sound Blaster and the plug-ins seem to go in okay. What I am getting is a sound apperance on the Premiere sound screen and also a wave form on the timeline. In all apperance the Storm card and the Premiere are working, but nothing seems to be coming out. Also I am getting no sound out when I download music in Audition. I did before I replaced my Windows XP SP3 OS.
I didn't know that the Canopus Storm 2 had a conflict with PP 1.5. I guess I never experienced any trounble before.
I just now went into my Adobe Premiere Pro 1.5 and opened up a capture that I had downloaded into the timeline. Here is what happens. When I scrub the Capture monitor in PP everything works fine in the computer and the studio monitor and sound line mixer. But when I scrub the timeline I get no sound out, and nothing shows up on my studio monitor. It is almost like everything is reverse.

Can I import I-life files into Adobe Premiere Pro CS4?

Okay, so not exactly an Apple question, but there are so many smart, helpful people on here, and the Adobe forum doesn' t seem very active.
I recently got Adobe Premiere Pro CS4 (the movie editing software). I tried to import files from I-photo, but those folders wouldn't even open. Tried to import files from the movie folder, which were in .mpg format, but got a message that it is an incompatible format.
Those were just simple movie files taken with a small digital camera. Does anyone know how I could use this footage in Adobe Pro? I have access to other Adobe software as well, perhaps there is a way to convert the files? If I try to import something to Adobe from I-movie, should that work? Or from I-DVD? Also, is it possible, with Adobe or regular Mac software, to import regular DVD footage (that is not in form of a computer file, but just something that plays in your DVD player) or perhaps convert it into a computer file? I have some old VHS footage that was copied onto a DVD and would like to edit it, or at least have it on my computer as a file.
Also, if I can't use those files, are there any places on the internet where one can download some simple footage to try out in Adobe? I'm new to it, so I'm just trying to get some files together so I can try out how it works.
Lastly, if anyone knows of a good online tutorual for CS4. It's an older version, and on the Adobe site they only have tutorials for the newer one.
Thanks!

This is a forum. None of the users here -at least not to my knowledge - are Adobe professional
Ninety-nine point nine percent correct. We are blessed with a few Adobe employees here, unlike some fora, but those folk are probably at NAB right now. Also, they are in other departments, so would have to walk "down the hall," or make a call, just as we would.
When it gets to issues on licensing, installation, etc., we're pretty much at a loss. Most of us have never encountered such issues, and only know what we have read in others' threads, when they have bothered to report back. Even then, that is third-hand info.
Last time that I had an Adobe installation issue was AI 3, IIRC. My upgrade version did not have the old database of S/N's. Mine was 00-000-003, and things had changed drastically. One call to Adobe, and a total time of about 5 mins. (including hold time), and I was given a number to plug in, and then everything installed perfectly. That was in about 1989, so is not quite contemporary. Still, that is the last and only first-person account that I can offer. Most here have zero personal experiences, as they came to the party later, and have just not had any such issues.
We'd love to help, but just do not have the experience.
Good luck,
Hunt

Swap fields in Premiere Pro CS4

Similar Messages

Maybe you are looking for