Swap fn and ctrl on B560 model

Hello
I buy b560 notebook - its good model but keyboard is dont usefull for my tasks (i am programmer).
Please help me swap ctrl and fn buttons... write me for my email about this...

There is a way apparently there : http://forum.notebookreview.com/lenovo-ibm/474396-​fn-ctrl-swap-all-lenovo-laptops-solved.html
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Similar Messages

  • Request: BIOS for GX740 to swap Fn and Ctrl key.

    hi,
    I was redirected from this topic https://forum-en.msi.com/index.php?topic=139362.0
    Apparently there is no BIOS function in GX740 for the owner to swap Fn and Ctrl key.
    Really appreciate it if it's available.
    Thanks.

    Quote from: 5rg on 08-August-10, 19:48:32
    I didn't receive email. I used alternative method form PM. Thanks.
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    Quote
    I didn't receive email.
    It was sent to ******* @gmail.com address. Check it in "spam" folder, maybe is there as there is no errors reported.
    Quote
    I used alternative method form PM. Thanks.
    Oki, that's the same.
    Quote
    I'll contact you if there is a problem with this mod. I didn't try it yet. Thanks again.
    You're welcome

  • Swap fn and ctrl - GX623

    How to swap fn and ctrl buttons on gx623?

    Look here: https://forum-en.msi.com/index.php?topic=123316.0

  • Newbie: swap fn and ctrl keys on T60

    I bought a used T60.  I am used to using HP Pavilions where the Fn and Ctrl keys are in the opposite positions as on the T60, and I am having trouble retriaining my fingers.
    So i looked for info about how to swap them.  I understand KeyTweak doesn't work on the Fn key, and then I ran across a message about getting to the BIOS.
    I have never messed with BIOS stuff before, but I did interrupt booting, get to it, but do not see swapping the Fn and Ctrl keys listed among the keyboard options.  So I am guessing this feature is maybe in a newer verison of the BIOS.
    I don't want to trash my laptop, but I'd like to swap the functioning of these keys - is there an idiotproof way?
    Also, I used the onetouch Pavilion keys a lot to invoke Firefox or thunderbird.  Is there a way to make a key on the T60 keyboard do that?  There are several keys I never use for anything, like PgUp, etc.
    Thanks.

    Not exactly true. You can't swap the keys with ORIGINAL BIOS - there are modded versions available that will let you do it.
    Read (and download) from here: http://forum.notebookreview.com/lenovo-ibm/474396-​fn-ctrl-swap-all-lenovo-laptops-solved.html
    Note! This is unofficial BIOS images - you might brick your computer, and neither I, nor Lenovo take any responsibility
    IT-technician, running my own company in Bergen, Norway
    Thinkpad T61, 8895CTO C2D 2Ghz/4GB/120GB SSD/1400x1050

  • Swap fn and ctrl keys

    Is there any tool that would let me swap functionalities of fn and ctrl keys on my MacBook Pro?

    try [Ukelele|http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele].

  • Swap cmd and ctrl keys?

    hello im a mac user but i have to open windows on bootcamp to do some work sadly.
    im finding it realy annoying having to swap between "command" and "ctrl" all the time. is there a way to swap them?

    You don't say which Windows you are using but there are many free applets for Windows that allow restructuring the keyboard. Just google for them.
    I take it you don't use the terminal mode in Leopard much, because that's the same as Windows.
    It always takes me a few minutes for my brain to "fix" my fingers for the OS in use - then it's OK.
    But I am sure you will find something on the net that will do what you want.

  • Swapping Fn and ctrl

    I read that it was possible (from another thread) to swap the fn and ctrl in system preferences. I would love to be able to try that out and see how well it works. I looked at the Keyboard and Mouse section under system prefernces but couldn't find any settings that let me do this.
    Can someone help me out?

    Input Remapper will allow you to make kay assignment changes
    http://www.olofsson.info/index.html?inputremapper.html
    There is a good forum to look through for information on this great little utility. In particular, read the sticky on uninstalling the keyboard drivers.
    http://forum.insanelymac.com/index.php?showforum=78

  • Swapping Fn and Ctrl on IdeaPad U330

    After reading the review http://www.jrin.net/2008_09_26/lenovo-ideapad-u330​-initial-hands-on-review of new IdeaPad U330 I understood that the "Fn" key is in the left corner of the keyboard, this is a big problem for users that often are using classic keyboards (on desktops at work or home) and switching to the notebook (at school).
    I am waiting for my IdeaPad U330 that I was billed for,  but I feel that I`ll have problems with the "Fn" key, so:
    I request Lenovo to make a change in BIOS or somewhere else for swapping the functions of "Fn"  ant "Ctrl" keys, there is no problem for me if on the key it will be written something else, but the user has to have the possibility to choose!
    Other user please sustain me here!

    contact middleton
    he managed to make ctrl-fn patch for y550, maybe he can as the same for u330.

  • The good old swap Fn and Ctrl question

    My H430 keyboard, like many Lenovo products, has the Ctrl and Fn keys swapped relative to the rest of the civilized computing world. Since I use keyboard shortcuts a lot when coding, this is a pain. Apparently the Thinkpad series has a BIOS option to swap the keys... but I don't see that option in the H430 BIOS.
    Of course I can buy a real keyboard and take the Lenovo one to Goodwill, but I did pay money for the Lenovo version.
    (Yes, I've read the explanation: in 1992 a highly-placed Macaque monkey in Lenovo's design department swapped the keys, and ever since then Lenovo has believed that some gadget of their own devising is more important than user ergonomics. Apparantly the Macaque monkey clique remains in control...  )
    Anyway: shall I go and get a new keyboard, or is there an easy way to make Lenovo's compatible with society?
    Solved!
    Go to Solution.

    From Wikipedia:
    There is not yet an agreed standard for the placement of the Fn key. It is usually placed adjacent to the left Control key, shrinking and displacing it in the process. The control key is most frequently associated with handy modifier keystrokes such as cut-and-paste, or application shortcuts such as control-s to save. The wide control key on a full size IBM PC keyboard layout allows users to become accustomed to using either the left or right side of the key for these shortcuts. In turn, shrinking and displacing it either to the left or the right causes considerable user-annoyance for a set of users....Further aggravating the situation is the fact that the Fn key is a hardware meta-key which is not remappable through operating system level keyboard remapping tools, ...
    Most manufacturers today have shrunk and displaced the control key to the lower-left corner of the keyboard, placing Fn to its right. This includes most laptops from HP, Dell, Samsung, and Lenovo Ideapads.
    Lenovo Thinkpads place the Fn key in the lower left, displacing control to the right. However, unlike most other manufacturers, the control key remains an oversize key. Keyboards have been a strong source of loyalty for the brand due to both feel and layout, especially among highly technical users, and Thinkpad keyboards are highly regarded as some of the best laptop keyboards.  However, their Fn key placement is sometimes a sticking point for users of other brands.
    Apple Laptops place Fn in the lower-left and shrink control to the right. However, Apple's OS X is somewhat less sensitive to control key shrinking, as it uses the Command-key for many common modifiers, making text-copy the PC keyboard equivalent of Alt-C instead of Ctrl-C.
    As an aside, I never noticed before but my Mac does indeed have the Fn key at the outside bottom corner, with the Ctrl to the right.
    So a replacement of the L. keyboard may be one solution. However, dmille writes (in topic "Access Lenovo H430 BIOS with non-Lenovo keyboard") that after replacing the Lenovo keyboard with another one it became impossible to access the BIOS with the F1 key. 
    Does Lenovo use a non-standard keyboard microcontroller interface, thus making it harder to swap out with an aftermarket keyboard? Huh! 
    Well, a purely mechanical solution to the problem of hitting the Fn key by mistake would be to pry the key up and drop some glue underneath. That ought to turn it into a stationary finger-rest. 
    I'll pick up a couple of keyboards at a used-PC shop and see if the F1-key disable problem crops up for me too. And I'll probably alter the Lenovo keyboard -- it's a huge annoyance to highlight a chunk of code and then, by hitting the Fn key by mistake, erase the whole thing. (Undo is your friend -- but it's still a pain.)

  • Request: Swap fn and ctrl keys [ cr700 ]

    that's it

    @darklifer
    open new own topic, list your hardware model,
    tell your current BIOS & EC versions, look for them in BIOS Setup
    then tell what's you need and will check if its possible or not

  • Request : BIOS for EX628 to swap Fn and Ctrl key please

    BIOS BUILD A1674IMS, Ver1.OV, 11/04/2009
    EC BUILD 1674EMS1 Ver4.23, 09/15/2009
    thanks

    Hello,
    Request can be proceed on donation:
    https://forum-en.msi.com/index.php?topic=134259.0
    Once done the request will be executed and will send back to you when its done

  • Fn and Ctrl key swap for GX740?

    hi, I searched through some topics, I found out that there is a EC mod to swap Fn and Ctrl key for GX620, but does it work for GX740?

    No, it will not work and probably will kill your notebook if you attempt this.
    You can open an request for your notebook in correct forum section:
    https://forum-en.msi.com/index.php?board=51.0

  • G serie fn and ctrl swap

    Hello,
    I just got a g560 with an intel i5-450m cpu, 320 gb hard drive, and 4gb ram.
    I got this laptop for 599 off newegg and i'm loving it. However, what really irks
    me is the placement of the fn and ctrl keys. Because I am a desktop user, I
    am used to the ctrl key in the corner. I checked online in places and heard that
    lenovo had a fn and ctrl swapping feature thingy in the bios but when I pressed
    f2 as it was starting up, I don't see the function or the keyboard section. Is it
    possible to swap the fn and ctrl keys for this laptop?
    Please let me know soon
    and thanx in advance.
    edit : subject edited for common issue.

    hey,
    thanx for the info.
    however, as i checked the drivers and updates from
    the lenovo driver download place, I saw that there was
    a bios update.
    http://consumersupport.lenovo.com/ot/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=67873&OS=Wi...
    my bios version is lenovo 29cn24ww v(1.07)
    and my smbios version is 2.6
    Please take a look and see if this is actually an upgrade
    or if it is actually a downgrade. I just want to make sure
    cuz I heard a lot of people saying that after they do a bios
    update, their comp freezes up and won't boot up.       O.O
    Thanx in advance.  xD

  • How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

    The BIOS feature that you request already exists.
    1.  reboot the computer
    2.  press F1 to enter BIOS setup
    3.  config -> keyboard/mouse -> Fn and Ctrl Key swap

  • Swap fn with ctrl in Windows 7?

    Double Command works perfectly for this in OS X. But I can't find any program to do this in Windows 7.
    The button lacks a scan code, so a .dll fixed this on Windows XP, but does not work on Win7.
    Is there any chance of Boot Camp ever supporting this, or Double Command working in Windows too?

    I've got exactly the same problem with my Macbook Air 2011 in Windows 7 (Bootcamp), I also would like to swap the "function" key with the "control" key (on the left side of the MBA keyboard).
    It should be easy enough for Apple to add/fix this in an update for bootcamp.
    A lot of "switchers" like myself have engrained habits from PC (with Control being in the left corner), not least in CAD where Ctrl is used a lot.
    It would be nice and appropriate of Apple to address this issue, since they are usually very focused on user experience/ergonomics and customizability...
    I've switched some other keys with Autohotkey (such as swapping alt and windows keys, making F12 the print-screen button and so on), which is easy enough, but, in order to change the fn key one would have to mess more deeply with the registry and that doesn't seem very safe or easy for the average user.
    It would be highly appreciated if apple could build us a complete key-remapping app for Windows and include it as a download in updates for BootCamp.
    It would help a lot of PC users feel more comfortable with switching to mac (likely still using windows for this-or-that specialized need, as do I).
    Since they will be able to work in the same way on their ie MBA in "pc-mode" as they did on their previous PC hardware (ie an Engineer who works in the same 3D software for years, on PC, doesnt want to change A THING, which is fair enough), they will feel much more comfortable with getting cozy with OSX...
    Looking forward to the good news asap!
    Otherwise insanely happy with my machine, fantastic piece of equipment, does everything I need it to (except above).
    Cheers,
    Lorenzo

Maybe you are looking for

  • Help with "owned" variables concept in WPF

    I'm trying to move from WinForms to WPF and so far it's been going well. I'm struggling with the concept of updating variables from events in my code behind. It says that it was created or owned by another thread. Basically in my code all over the pl

  • Problem in AP after transefering  journals to GL

    Hi, I am run request transefer journal to GL to transefer invoices journal the requesr run completed and correctly when swith to Gl responsiibilty to find unposted journal i can't find it i used toad to serch the journal in GL_JE_LINES GL_JE_HEADERS

  • CFCHART Changes ?

    I just discovered how to use the CFCHART in ColdFusion MX, and I thought it looked great,at least as compared to the old charting method supported by ColdFusion. Then, in testing the charts in CF7, I find that the entire format for Pie Charts has bee

  • TAF On 11g DataGuard with FSFO

    Hi All, Today, i have created TAF for my 11.1.0.7 Oracle database running on RHEL 5.4 64 bit. I have configured my databases with FSFO enabled. (MaxAvailibility with LGWR SYNC AFFIRM transport) I created TAF with following entries: 1) Created and ena

  • Can't get Solaris 8 to show my second hard drive.

    I installed Sol8 on a 1 hard drive intel machine (as the only OS, no windows). Later, I added a second hard drive, and after running the device config assistant (DCA) still doesn't show it in the list of drives under the 'format' command. Physically,