Swap out dataset for new data possible?

If I use the same column names in my underlying database tables, is it possible to use them in an existing report to refresh data for new quarter without wiping out my existing reports? The reports took a long time to set up so I hope I can do this.
If it is, can you please point me in the right direction?
Thanks in advance. I think is is probably a basic concept but I'm having a mental block.

Hi ,
I dont think it is possible to append the data to existing report . Once the data rendered to the report , the data is pretty much static and if you want new data to be shown up you need to refresh and re-render the report. Alteranatively , if your
report is taking long time to render consider caching the reports
http://msdn.microsoft.com/en-IN/library/ms155927.aspx
Best Regards Sorna

Similar Messages

ERR:10003 Unexpected data store file exists for new data store

Our TimesTen application crashes and then it can not connect TimesTen datastore, and then we use ttIsql and get error "10003 Unexpected data store file exists for new data store".So we must rebuild the DataStore.
I guess the application damages the datastore because we use "direct-linked" mode. Is it true?
Should I use "Client-Server" mode if our data is very important?
thx!

Your question raises several important discussion points:
It is possible (though very unlikely in practice) for a C or C++ program operating in direct mode to damage the contents of the datastore e.g. by writing through an invalid memory pointer. In the 11+ years that TimesTen has existed as a commercial product we have so far never seen any support case where this was diagnosed as the cause of a problem. However, it is definitely a theoretical possibility and rigorous program testing and use of tools such as Purify is strongly recommended when developing in C or C++ in direct mode. Java programs running in direct mode are completely 'safe' unless they invoke non-Java code via JNI when a similar risk is present.
The reality is that most customers who use TimesTen in very high performance mission critical applications use mainly direct mode...
Note also that an application crashing should not cause any damage or corruption to a datastore, even if it is using direct mode, as Times%Ten contains explicit mechanisms to guard against this.
Your specific problem (error 10003) is nothing to do with the datastore being damaged. This error reflects a discrepancy between the instance main daemon's metedata about all the datastores that it is managing and the reality. This error occurs when the main daemon does not know about a datastore and yet when it comes to connect to (and hence create) the datastore it finds that checkpoint or log files already exist. The main daemon's metadata is managed solely by the main daemon and is completely separate from the datastore and datastore files (the default location is <tt_instance_install_directory>/info, though you can change this at install time). The ususal cause of this is that someone has been manually manipulating files within that directory (which of course you should never do) and has removed or renamed the .DBI file corresponding to the datastore.
This error should never arise under normal circumstances and certainly not just because some application has crashed.
Rather than simply switching to the (much slower) client/server mode I think we should try and understand why this error is occurring. Could you please post the following:
1. Output of ttVersion command
and then we can take it from there.
Thanks, Chris

Period is locked for new data

Good Morning,
Anyone get this error before?
-4013:Period is locked for new data
   at NetPoint.SynchSBO.SBOObjects.SBOOrder.NetPointToSBOOrder(NPOrder order)
   at NetPoint.SynchSBO.SBOObjects.SBOOrder.NetPointToSBO(NPQueueObject qData)
   at NetPoint.SynchSBO.SynchObjectBase.Synch()
Haven't received it before today, of course, the day we go live. The period we are posting to is not locked for new data and it seems to be limited to one customer only... Any immediate thoughts?
Thanks so much,
Kristen

OK, I have it working for the moment, but I am very curious about this. I went back in and selected the Install Plugin button 2 more times just to be sure, I restarted everything and they went through fine. Could it be that the Plugin installed partially before? It didn't seem so because other orders were flowing both ways and just certain ones were seeming to get stuck... Then more gradually started failing until none were passing through. This has been working seemlessly in this environment for weeks until of course go live today, so I am at a loss. Probably just that one piece of excitement for Go Live that we were missing. All is well. James, thanks for responding.

Period is locked for new data [Message 131-107]

Hi all,
One of my client was faced this problem "Period is locked for new data [Message 131-107]" when they do Period-End-Closing for Year 2008 in SAP Business One 2007A Patch 42.
Can anyone help me?
Thank you.
Best regards,
danny

Hi Danny,
Check the link
Period End Closing
*Close the thread if issue solved
Regards
Jambulingam.P

Period locked for new data on PO an SO

Since last week when we try to update a PO anr SO we got this Message
PERIODE LOCKED FOR NEW DATA.
For exemple we change the remark feild only and we got this message.
Since PO and SO are not impacting any gl entry this is not normal. on the DEMO DB i can update a SO or PO when the perio is close without any problem

Hi Roy,
First you have to change if your posting perioud is close.
if close then choose your posting perioud then in your window left side a sign of triangle click on.
after change ur status and after u are able to do changes in previous posting perioud.
this may help u...
Thanks.
JRAJPUT

Swapped out AE for TC and now can't connect to Internet!

Hello all.
I just swapped out an Airport Express base station (the square one, not the old spaceship-shaped one) for a shiny new 1-TB Time Capsule. I figured that since 500 GB external hard drive for Time Machine backups is running out of space, so why not just get a TC so I don't have to worry about (a) hard drive space or (b) plugging in external drives again.
I unplugged the AE and plugged in the TC. Everything else is the same: The TC is plugged into a Verizon DSL modem, and we have two MacBooks in our house. I configured the TC using the Airport Utility. Everything appears to be OK, except that I can't connect to the Internet any more.
I have tried some of the tricks that have worked for other people on this discussion board -- namely, unplugging the DSL modem and the TC and restarting them. They don't appear to work. When I put the old AE back, everything works like a charm.
Has anyone run into this problem before? I'd be grateful for advice and ideas. I don't want to use the TC as a secondary wireless network device, like a range extender. It's a pricey piece of equipment and it should do what it says on the box. I'm pretty sure that the fault lies somewhere between the DSL modem and the TC, but I'm not clever enough with these things to figure it out on my own.

Same problem....3 calls to tech support and almost another one yesterday UNTIL I discovered that re-setting the TC (with the paperclip tool!) worked. The Airport Network, via TC, recognizes my Network and TC pops up into the airport Utility. i kept "losing TC in the Airport Utility page....it only showed AE/Base Station...not waht I wanted.
I unplugged the Express (previous model,one that was prior to "X" capability, ie b/g) and left it unplugged.....this must be an issue) My ONE TO ONE instructors have offered to have a look at it, the AE,at my next appointment.
I, too, have a DSL modem (Qwest) that I have unplugged without success (connections) Unplugging the units seems to work for some things but not this particular problem.
Hope this helps.

Tutorial for new Data Upload feature in 4.1?

Greetings,
Is there a tutorial available for using the new Data Upload feature in 4.1? We have not upgraded to 4.1 yet and I would like to try out the new feature on my APEX test workspace, so I can use the new feature once we are upgraded to 4.1.
Thanks,
John

I installed the Product Portal Sample Database and went to page 21. Very nice looking. Is there any tutorial for this Sample application? In other words, is there a tutorial that uses this application as its basis?
What I am really looking for (my apologies if I have not been clear) is a tutorial that steps you through the process of setting up the new feature of Data Upload in APEX 4.1. I would like to create a new application on my test workspace and learn how to set up the Data Upload page.
Seeing the Data Load in action is very helpful though. Thanks for pointing me to this.
Thanks,
John

I just swapped old modem for new model. Says I'm connected but airport flashing amber and no connection. Do I have to configure a new network???

I just swapped out old modem for new model. Airport flashing amber. Wi-Fi connection good but airport not responding. Do I need to configure a new network connection? Change anything in airport utility?

Welcome to the forum!
I'm a big fan of resetting in situations like this. Who knows what boxes you've ticked where...
Use the hard reset button with a paper clip on your Airport express. Hold it til the light starts blinking, then let it reset.
While it's resetting, go into your Network prefs and make sure you're set up to connect via Airport. Delete any references to your prior wireless network in the preferred networks section. Go into your keychain utility and delete any passwords there. (this is assuming you were using some form of wireless security).
After your AE has restarted, choose it from the Airport pull-down menu and run the Airport Setup Assistant utility. Once you've got it up and running, use Airport Admin utility to set security and passwords.
Seems drastic, but after all the poking around you've done, these steps should be pretty simple to perform. I'm guessing your original "Looking for PPPoE host" was a temporary problem with your IP. Maybe the ethernet cable was unplugged from AE?
Good luck

Swapping out BMPs for PNGs

It's my understanding, in general, that the PNG file format
is smaller and
more appropriate for graphics being displayed on a monitor
screen. Much
smaller. So I tried an experiment, in an effort to reduce the
overall size
of my Captivate file.
1. I exported 5 of the background images in a Captivate (3)
movie and
converted them to PNG files using Adobe Fireworks.
2. I imported the new PNG files back into the same Captivate
movie
3. I swapped the backgrounds for those 5 slides, replacing
the BMP files
with the new PNG files
4. I deleted the BMP background files from the library.
5. I saved the Captivate file
The file size of each individual BMP background image had
been about 2500
KB, replaced by a PNG background image that is about 80 KB. I
know you're
thinking that this should have made a dramatic difference in
the file size
of the Captivate movie. That's what I thought too. But I was
wrong!!
The result ...the Captivate file with PNG files was larger!
Not a lot ...
but it was larger.
Can anyone figure out why this is the case? There are no
settings that I can
find that address the use of PNG files at all.
I'd really like to get the file size of my production down,
without
sacrificing quality. I thought for sure that this would do
it.
Marge

Hi Shawn
The forums software was upgraded to a new format a while back. The link you are pointing to is one that would have worked in the older FuseTalk forums. It is now broken and not understood by the Jive forums.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Discrepency while REPLICATING META DATA (for new DATA SOURCE) in BI side.

In R/3 I have created a simple TRANSACTIONAL data store based on an INFO QUERY.
I even checked the veracity of this data store using RSA3 to see whether it extracts data. Works perfectly.
I go to BW side. Click on the SAP module under which I have created the data source, right click, select 'REPLICATE' and click on it.
( I would love to post the screen shot here, but I think I may not be able to paste BMP files here).
I will write the contents of the POP-UP that appears,
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
3. this and following 3 as DataSource (RSDS)
4. this and following 3 as 3.x DataSource (ISFS).
Well, I normally select option three as per my instructions (without knowing the real reason).
But sometimes, either for the same data source or for another data sources that I created, the same pop up will appear like this
Title:Data Source from Source System Unknown
Pop-up contents:
Data Source (OSOA) DS_01
does not exist in BI system
How do you want to create the object in BI?
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
Just TWO options.
And, if I select option 1, the data source does not work properly on BI side, though it worked perfectly on R/3 under TRANSACTION RSA3 and showed me data.
For some unknown reasons, if I delete the erroneous datasource on BI side and sleep overnight and comeback in the morning and replicate, the POP-UP sometimes appears with FOUR options, (Notice the word 'SOMETIMES')
Can someone explain the secret behind this?
Thanks again in advance,
Gold

3. this and following 3 as DataSource (RSDS)
That means there are total 3 new (not yet in BI) DataSources available, u wanted to replicate as 7.0 datasource (RSRS) or 3.x datasource (ISFS).
(other 2 datasources activated from RSA5, or created by other users under that SAP module)
If there is 1 new DataSource, u will get just TWO options.
1. as DataSource (RSDS)
2. as 3.x DataSource (ISFS)
After replication with option 1, u should activate datasource in BI, then create infopackages, transformation, DTP etc.

How do I swap out jpgs for tiffs after importing a project edited in Pr, to AE?

the original Pr project was created from an image sequence of jpgs.
I'm doing stop motion using Dragonframe to capture the images and here's the workflow i was refered to
Dragon Frame (DF)
Capture in Hi-Res (RAW) and low res jpegs.
Export 720P file for editing in Premiere (establish file name).
Light Room (LR)
Resize RAW files to 2K(tiff), flatten image
Export 2K image sequences (name the same as 720P files)
Premiere (PR)
Cut 720P files to a picture lock.
After Effects (AE)
Import Premiere project.
Swap out 720P files for 2K(tif) image sequences.
Work on shots as compositions.
Composite environmental elements.
Remove rigs.
Export final project.</li>
</ul>

File --> Replace Footage
Mylenium

Issue with DSO Table for New data

When I click on content of new data in the manage of this particular DSO it hangs forever. Also, when I go to se11 and give the related New Data table, it ahngs forever.
Anybody experienced this before or what would this issue be related to?
Thanks in advance

Ask your DBA to see if h/she is able to access the same table from the backend...
When does it hang ?
When displaying the table structure in SE11 or when going to the first selection screen from SE11 or afterwards..?

Form on screen, not updating for new data on inputstream

I'm writing a j2me midlet that will initiate a bluetooth connection to another device. I have been able to set up the inputstreams and outputstreams and send some data between the two devices using serial port emulation.
The following is the code for this part of the program:
ServiceRecord s = (ServiceRecord) serviceVector.elementAt(a);
        int data[] = new int[10000];
        InputStream in = null;
        OutputStream out = null;
        Form dataForm = new Form("Data");
        dataForm.addCommand(exitCommand);
        dataForm.addCommand(backCommand);
        dataForm.setCommandListener(this);
        display.setCurrent(dataForm);
        try {
            StreamConnection conn = null;
            String url = null;
            try {
                url = s.getConnectionURL(ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
                conn = (StreamConnection) Connector.open(url);
            } catch (IOException e) {
                System.err.println("Note: can't connect to: " + url);
            in = conn.openDataInputStream();
            out = conn.openDataOutputStream();
            int ch;
            out.flush();
                while (((ch) = in.read()) != -1) {
                    String aChar = new Character((char)ch).toString();
                    dataForm.append(aChar);
                    dataForm.append("\n");
            conn.close();My problem is that the midlet on the mobile phone will only update its window to display the new screen as a form once the connection has been terminated, that is when the while loop has been broken. Is there a way in which to display the form while the inputstream is waiting for data and then watch the addition of data in real time to the form?
I am relatively new to java and have searched the forum/ internet for such a problem but have not been able to find a solution. Cheers

I don't think that is it now that we are into Monday and it still hasn't updated. Anybody else having issues with their text descriptino not updating? What's a good email address to contact apple about the problem. Non of the "contact Us" email addresses seem to fit the description. The [email protected] is a blackhole.

Will Apple Store Swap Old Model For New Model?

I have a question. Suppose you bought a brand new MacBook Pro within the last 2 weeks from an Apple Store, and new models come out, say, this week. If you took your brand new MacBook Pro back to the Apple Store, would they exchange it for free for one of the new models?
If that is indeed the case, what's the date range? Within the last 2 weeks from the date the new models come out, or perhaps even the last month?

I believe there is a 2 week grace period. There might be a restocking fee involved. Why not ask at an Apple store?

Polling for new Data in Tables with SQL-functions

Hi
In my table I have 2 columns:
event_state : integer (0 = unread, 1 = read)
min_process_time : date
In the DB-Adapter-Wizard I can configure my event_state-Field for using as logical delete field. In the SQL-Query there is a
... WHERE event_state=0
But, I only want to query all new entries in this table, where
min_process_time > SYSDATE.
How can I configure my toplink-mapping, that SYSDATE can be used in the polling-query? If I use plain-sql instead of the expression from the Wizard (last page), then this sql-statement is ignored. In an expression I only can use a constant-value.
Any idea?
Thanks
Gregor

Hi
I am creating a database Polling (logical delete OPEN to CLOSED) adapter that polls a table for records which have a "SCHEDULED" date field.
The Polling Adapter should pick up those records where the status is OPEN and SCHEDULED<=SYSDATE.
DB Adapter wizard does not allows this where clause(SCHEDULED<=SYSDATE) to be set; so i tried modifying the Toplink SQL with custom SQL. But it does not works. Please suggest a workaround.
Please help.
Thanks
Debashis

Swap out dataset for new data possible?

Similar Messages

Maybe you are looking for