Swap size when insalling LMS 3.2
Trying to install LMS 3.2 on win server 2003 which has 4gig RAM on a 160gig harddrive.
The Swap is set to 9 gig but this seems little under installation. The system says it is 4gig of Swap which will cause poor performance.
Any tips and suggestion will be appreciated.
Yawena.
Exactlly, how did I do that? Actually I did not do anything, but saw one of the HD named "Swap" with the size of 9gig. My mistake.
Then found out that the max virtual mem was set to 4096. Changed that according to your suggestion. The installation went well without error.
Am on the next step now, I think I have to wait a bit because after installation, booted the server and and logged on the browser and got some DCR and cmfDbmonitor issue in CS. May be have to restart the processors.
Thanks Joe!
Similar Messages
-
Why swap size error when I install ides ecc6.0 in windows 2003 x86
Hi,
I feel very confusion why the installation prompts me that "Swap size are not meeting condition" when I install IDES 6.0 in windows 2003 server x86.
The ides type: ECC 6.0, MS SQL server 2005, Windows 2003 server x86.
It's windows, not linux, where is the swap space?
Could somebody give me a kindly help?
Thank and thank
JasonHi,
In Windows, Paging File Space (Virtual Memory Space) concept is called as similar to Swap space thing in Linux/Unix OS. Both terms are used for virtual memory concept as per OS.
Minimum 20 GB of Paging File spaces is required for the SAP Installation on Windows. So ,allocate them from different drives or from single drive partition of your available Hard disk space.
Follow this path [to change your existing Virtual Memory or Page File size in Windows|http://technet.microsoft.com/en-us/library/cc737315%28WS.10%29.aspx].
Control Panel -> system -> Advanced Tab -> Performance section-Settings -> Advanced Tab -> Virtual Memory ->Change
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Feb 6, 2010 2:36 PM -
Swap size keeps dropping on Solaris 10 (x86)
Hi,
I have setup Solaris 10 (x86) on a SunFire V20Z, and mirrored my 2 hds.
raidctl c1t0d0 c1t1d0
recently i have been getting system messages that says
WARNING: /tmp: File system full, swap space limit exceeded
when i checked, I noticed that my swap size has dropped. I had setup c1t0d0s1 for swap (2GB).
When i reboot, the system will show the swap as correct, but it will start dropping over a period of time
bash-3.00# swap -l
swapfile dev swaplo blocks free
/dev/dsk/c1t0d0s1 28,65 8 4193272 4193272
bash-3.00# swap -s
total: 565248k bytes allocated + 933124k reserved = 1498372k used, 2280600k available
The next day when i check again;
-bash-3.00$ swap -l
swapfile dev swaplo blocks free
/dev/dsk/c1t0d0s1 28,65 8 4193272 4193272
-bash-3.00$ swap -s
total: 1344296k bytes allocated + 1676016k reserved = 3020312k used, 642752k available
I have just rebooted my system again because my /tmp has dropped to 8.3MB
swap 8.3MB 4.0K 8.3MB 1% /tmp
My /tmp mount in vfstab shows;
swap - /tmp tmpfs - yes -
Any help?Well, /tmp and swap are tightly connected to eachother, since its basicly the same thing.
Hence, when you allocate space in /tmp, the amount of available swap will drop, in the same way the amount of space available in /tmp will drop if a lot of swap has been allocated by processes running on the system.
swap -s will show you the amount of unallocated (or free) swap, that it shrinks over time is perfectly normal on most systems, however its not really normal that applications allocates that much swap on a short time.
I suspect that you have an application running on your system which is eating a lot of memory and hence using up your swap space, so next time this problem occour, i'ld run the following;
prstat -a -s size
This will give a list of processes running on the system, and sort them by how much virtual memory they have allocated.
Funny thing; i tested the command above on a S10 server, and found that nfsmapid had allocated about 400 mb. And i'm not even using NFSv4.. smells memory leak.
Hope this explaination is somewhat clear ;)
7/M. -
How to determine SWAP size ??? (Netra 440/ Solaris 10)
Hi Friends
I have trouble with the following OUTPUTs:
# prtdiag
System Configuration: Sun Microsystems sun4u Sun Fire V440
System clock frequency: 177 MHZ
Memory size: 8GB
# /usr/sbin/swap -l
swapfile dev swaplo blocks free
/dev/vx/dsk/bootdg/swapvol 291,7000 16 16373168 13437120
# swap -s
total: 6495832k bytes allocated + 236328k reserved = 6732160k used, 6942968k available
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/bootdg/rootvol 62516603 34004373 27887064 55% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 6962904 1608 6961296 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap1.so.1 62516603 34004373 27887064 55% /platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap1.so.1 62516603 34004373 27887064 55% /platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0 0 0 0% /dev/fd
swap 6965712 4416 6961296 1% /tmp
swap 6961344 48 6961296 1% /var/run
swap 6961296 0 6961296 0% /dev/vx/dmp
swap 6961296 0 6961296 0% /dev/vx/rdmp
/dev/vx/dsk/bgw1dg/vol01 203768832 129151641 70294743 65% /var/opt/BGw/Server1
/dev/vx/dsk/ora1dg/vol01 10480640 5502642 4666959 55% /var/opt/mediation/ora
/dev/dsk/c1t2d0s2 70589121 219550 69663680 1% /mnt
At first I would have said that the total SWAP size is 6,6GB, but now I am in doubt since I see several SWAP line on the df OUTPUT.
Please help:
1. What is the total SWAP size for the machine?
2. Why is there 4 lines mentionning SWAP on the df OUTPUT?
3. With 8GB of RAM on this machine do I need to increase the SWAP?
4. If yes how to increase the SWAP?
Thanks in advance !Swap can be a confusing thing. It's an overloaded term that people often use to mean somewhat different things.
1. Determine the swap allocated for the system with swap -l. The number of blocks minus the swaplo value will give you the true count. Blocks are 512 bytes, so do the math to get a GB value.
2. df output reflects file systems that are currently in use. In Solaris 10 there are a few virtual file systems that are backed by swap space itself. You'll notice all these swap fs components have the same size because they use the swap as a common pool.
3. Sizing swap shouldn't be based strictly on the amount of physical memory available. While there are guidelines for doing precisely that, those guidelines are given for the general case (i.e., no information on the apps that will be running). Monitoring demand is key. swap -s and vmstat will both give you a good general view of the demand for swap.
But, if you're a guidelines sort of person:
http://docs.sun.com/app/docs/doc/817-5093/fsswap-31050?a=view
4. The easiest way to increase swap is to make files that can be added to the overall swap space. I generally prefer this approach from the ground up, because it means I never have to dedicate disk space to a swap region. There are different steps for doing it with UFS and ZFS. Here's the ufs way:
a) Pick a UFS file system with space on a disk that isn't hot. Make a swap file and add it to the swap space like so:
- # mkfile 1024m /filesys2/swapfile
- # swap -a /filesys2/swapfile
Then check the outcome with swap -l and swap -s.
In many cases I will add a swap file to a customer's system and remove the partition-based swap (swap -d) that they have. There is no appreciable difference in performance and the flexibility of moving swap can come in handy when a system has to accept a different workload with a minimum of downtime. -
How can I find out the real swap size in use?
Output from top
Memory: 48G real, 18G free, 35G swap in use, 70G swap free
Output from swap -l
swapfile dev swaplo blocks free
/dev/md/dsk/d20 85,20 16 143514512 142687856
Output from vmstat
r b w swap free re mf pi po fr de sr m1 m1 m1 m2 in sy cs us sy id
0 1 0 77353576 21184344 791 2270 3705 4 4 0 0 8 6 6 1 4691 153527 11300 6 8 86
How can I calculate the real swap size in use and available?
ChaMy god man. You didn't configure 70GB of swap, really, did you?
You know that the old recommendation of "double the memory" stopped making sense back in the day when we started getting more than 2GB ram.
Anyway, to answer your question - top's number is correct.
You can also use sar to look at the number of free blocks available to swap.
In any case, 35G of swap in use ... thats a sick system. If thats an oracle box, get your oracle boys to tune back the amount of ram oracle is allocating ... :) -
SWAP SIZE Recomonded during instalation.
Dear All
When installing Dialogue Instance, it shows an error as below :
Code:
Condition : Swap Size
Result Code : Condition not met
Severity : MEDIUM
Message : For the selected services at least 74228 MB swap space are recommended. Current value: 65536 MB. (Updated 2005-06-24)
Before it's size is of 40128MB, i extended it up to above value 65536MB.
But from that, i cant extended it as per the requirement mentioned above.
If i try to extend it shows as :
Code:
extendlv hd6 1G
0516-787 extendlv: Maximum allocation for logical volume hd6
is 512.
Please suggest me, How to proceed further, or is there any other way.
Waiting for your replies,
Thanks in advance,
Regards
Vamsi.Hi Vamsi,
extendlv hd6 1G
0516-787 extendlv: Maximum allocation for logical volume hd6
is 512.
try this, find your rootvg pp size
#lsvg rootvg | grep "PP SIZE"
VG STATE: active PP SIZE: 64 megabyte(s)
Need to calculate how many new PPs are needed in the hd6
size x 1024 /PP Size
1x1024/64 = 16
extraPPs+current=New
16+512=528
extend the LV
#chlv -x 528 hd6 -
Hello,
I'm installing SAP Solution Manager on Ubuntu.
I started sapisnt end after typing the Database ID, when on the status line appears "Checking Swap Size..." I get an error.
I copy the tail of sapinst.log:
INFO 2006-05-13 17:35:58
Execute step prepareChecks of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
INFO 2006-05-13 17:35:59
Execute step runChecks of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
ERROR 2006-05-13 17:36:01
FCO-00011 The step runChecks with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks was executed with status ERROR .
INFO 2006-05-13 18:01:17
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks".
ERROR 2006-05-13 18:01:20
FCO-00011 The step runChecks with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks was executed with status ERROR .
INFO 2006-05-13 18:01:24
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks".
ERROR 2006-05-13 18:01:28
FCO-00011 The step runChecks with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks was executed with status ERROR .
Do you have an idea of which problem could occure?
Thank you.
Regards,
Tommaso cereghettiHi Pascal,
I noticed that sapinst is using /oracle, but I didn't selected the DB path yet. Could that be the error? Where is the system reading this path from?
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.956 NWUsers.haveAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.964 NWUsers._readAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.964 NWUsers._isSystemRead(ORA_SID, os)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.970 NWUsers._isSystemRead() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.970 NWUsers._readAccountData() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.971 NWUsers.getMasterPassword()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.972 NWUsers._useMasterPasswordForAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.973 NWUsers._useMasterPasswordForAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.974 NWUsers.getAccountData(): {
role:ORA_SID
type:USER
systems:os
id:
name:oraeva
comment:SAP Database Administrator
home:/oracle/EVA
shell:/bin/csh
privileges:
exists:false
client:
host:undefined
instancenumber:undefined
locked:false
password:XXXXXX
groups:dba,oper,sapinst
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
set accountdata for ORA_SID to {
role:ORA_SID
type:USER
systems:os
id:
name:oraeva
comment:SAP Database Administrator
home:/oracle/EVA
shell:/bin/csh
privileges:
exists:false
client:
host:undefined
instancenumber:undefined
locked:false
password:XXXXXX
groups:dba,oper,sapinst
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:10.975 NWUsers.changeAccountData() done
TRACE
The step askOraSid with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|NW_GetDBUserParameter|ind|ind|ind|ind|3|0|NW_GetUserParameterUnix_ora|ind|ind|ind|ind|0|0 has been executed successfully.
INFO 2006-05-15 10:56:11
Execute step sanityCheckAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:NW_GetSidNoProfiles_ind_ind_ind_ind
function:NW_GetSidNoProfiles_ind_ind_ind_ind_DialogPhase_sanityCheckAccounts_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|sanityCheckAccounts returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:NW_GetSidNoProfiles_ind_ind_ind_ind
function:NW_GetSidNoProfiles_ind_ind_ind_ind_DialogPhase_sanityCheckAccounts
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.229 NW.getSystem(EVA)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.234 NW({
dbtype:ora
dir_profile:/usr/sap/EVA/SYS/profile
doMigMonConfig:false
hasABAP:true
hasJava:true
isAddinInstallation:undefined
loadType:SAP
os4_krnlib:
os4_seclanglib:
sapDrive:
sapmnt:/sap/sapmnt
sid:EVA
umeConfiguration:
unicode:true
useParallelAbapSystemCopy:
workplace:false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.274 NW.setSapDrive()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.275 NW.setSapDrive(): nothing done.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.275 NW() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.276 NW.getSystem() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.276 NWUsers(EVA)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
t_NW_users.updateRow({
sid:EVA
}, WHERE sid='EVA'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.279 NWUsers() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.279 NWUsers.sanityCheck()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.280 NWUsers.sanityCheckOsAccount(SIDAdm)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.280 NWUsers.getAccountData(SIDAdm)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.282 NWUsers.haveAccountData(SIDAdm)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.289 NWUsers.haveAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.297 NWUsers._readAccountData(SIDAdm)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.297 NWUsers._isSystemRead(SIDAdm, os)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.303 NWUsers._isSystemRead() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.304 NWUsers._readAccountData() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.304 NWUsers.getMasterPassword()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.305 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.306 NWUsers._useMasterPasswordForAccountData(SIDAdm)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.307 NWUsers._useMasterPasswordForAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.307 NWUsers.getAccountData(): {
role:SIDAdm
type:USER
systems:os
id:
name:evaadm
comment:SAP System Administrator
home:
shell:/bin/csh
privileges:
exists:false
client:
host:undefined
instancenumber:undefined
locked:false
password:XXXXXX
groups:sapsys,sapinst,dba,oper
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.308 NWUsers.sanityCheckOsAccount() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.308 NWDB._get(EVA, ora)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.309 NWDB._fromTable(EVA, ctor)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.311 NWDBora(EVA)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.312 NWDB(EVA, {
ORACLE_HOME:
abapSchema:
abapSchemaUpdate:
dbsid:EVA
hostname:gadamer
installDB:true
javaSchema:
sid:EVA
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.312 NWDB() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.313 NWDBora(EVA) done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.313 NWDB._fromTable() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.314 NWDB.getDBSID()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.314 NW.getPersistentDefaultProfile()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.337 PersistentR3Profile().getPath()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.338 NW.getDefaultProfilePath(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.338 NW.getDirProfile(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.339 NW.getDirProfile() done: /usr/sap/EVA/SYS/profile
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Defaultprofile of EVA is /usr/sap/EVA/SYS/profile/DEFAULT.PFL
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.340 NW.getDefaultProfilePath() done: /usr/sap/EVA/SYS/profile/DEFAULT.PFL
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.341 PersistentR3Profile().getPath() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.342 NW.isUnicode(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.342 NW.isUnicode() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.342 NW.getPersistentDefaultProfile() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.343 NWDB.getDBSID() done: EVA
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.343 NWDBora.sanityCheckAccounts() start
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.344 NWDB.getDBHost()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.344 NWDB.hasABAP()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.345 NW.hasABAP(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.345 NW.hasABAP() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.345 NWDB.hasABAP() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.346 NW.getPersistentDefaultProfile()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.347 PersistentR3Profile().getPath()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.348 NW.getDefaultProfilePath(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.348 NW.getDirProfile(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.349 NW.getDirProfile() done: /usr/sap/EVA/SYS/profile
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Defaultprofile of EVA is /usr/sap/EVA/SYS/profile/DEFAULT.PFL
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.350 NW.getDefaultProfilePath() done: /usr/sap/EVA/SYS/profile/DEFAULT.PFL
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.351 PersistentR3Profile().getPath() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.351 NW.isUnicode(true)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.352 NW.isUnicode() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.352 NW.getPersistentDefaultProfile() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.352 NWDB.getDBHost() done: gadamer
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.353 NWUsers.sanityCheckOsAccount(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.354 NWUsers.getAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.356 NWUsers.haveAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.363 NWUsers.haveAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.370 NWUsers._readAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.371 NWUsers._isSystemRead(ORA_SID, os)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.377 NWUsers._isSystemRead() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.377 NWUsers._readAccountData() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.377 NWUsers.getMasterPassword()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.379 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.379 NWUsers._useMasterPasswordForAccountData(ORA_SID)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.380 NWUsers._useMasterPasswordForAccountData() done: true
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.381 NWUsers.getAccountData(): {
role:ORA_SID
type:USER
systems:os
id:
name:oraeva
comment:SAP Database Administrator
home:/oracle/EVA
shell:/bin/csh
privileges:
exists:false
client:
host:undefined
instancenumber:undefined
locked:false
password:XXXXXX
groups:dba,oper,sapinst
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.381 NWUsers.sanityCheckOsAccount() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.382 NWDBora.sanityCheckAccounts() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.382 NWUsers.sanityCheck() done
TRACE
The step sanityCheckAccounts with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0 has been executed successfully.
INFO 2006-05-15 10:56:11
Execute step fillPRCContext of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:NW_Onehost_System_ind_ind_ind_ind
function:NW_Onehost_System_ind_ind_ind_ind_DialogPhase_fillPRCContext_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|fillPRCContext returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:NW_Onehost_System_ind_ind_ind_ind
function:NW_Onehost_System_ind_ind_ind_ind_DialogPhase_fillPRCContext
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.625 NW.getSystem(EVA)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.630 NW({
dbtype:ora
dir_profile:/usr/sap/EVA/SYS/profile
doMigMonConfig:false
hasABAP:true
hasJava:true
isAddinInstallation:undefined
loadType:SAP
os4_krnlib:
os4_seclanglib:
sapDrive:
sapmnt:/sap/sapmnt
sid:EVA
umeConfiguration:
unicode:true
useParallelAbapSystemCopy:
workplace:false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.665 NW.setSapDrive()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.666 NW.setSapDrive(): nothing done.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.666 NW() done
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2006-05-15 10:56:11.667 NW.getSystem() done
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6890
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPrerequisiteCheckerDialogs_context.insertRow({
dataPath:/sap/inst/SOLMANMaster/IM_LINUX_X86_64/COMMON/INSTALL/PREREQUISITE_CHECK_DATA.XML
showDBInfoDialogs:false
showSapSystemInfoDialogs:false
showOnlyBadResults:true
showDataFileDialog:false
showServiceDialog:false
showResultsDialog:true
runChecksInDialog:true
}), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.insertRow({
id:abap_ci_inst,abap_scs_inst,abap_di_inst,j2ee_ci_inst,j2ee_scs_inst,j2ee_db_inst
selected:true
}), inserting
TRACE
The step fillPRCContext with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0 has been executed successfully.
INFO 2006-05-15 10:56:11
Execute step setDefaultDataPath of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_setDefaultDataPath_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|setDefaultDataPath returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_setDefaultDataPath
is validator: false
TRACE
The step setDefaultDataPath with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:12
Execute step getPreliminaryShipmentInfo of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_getPreliminaryShipmentInfo_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|getPreliminaryShipmentInfo returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_getPreliminaryShipmentInfo
is validator: false
TRACE
The step getPreliminaryShipmentInfo with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:12
Execute step showDataFileDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showDataFileDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|showDataFileDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showDataFileDialog
is validator: false
TRACE [iaxxcdialogdoc.cpp:142]
CDialogDocument::evaluateDependsAndDependsNot()
Do front side checks at backend for dialog element dataPath
TRACE [iaxxcdialogdoc.cpp:150]
CDialogDocument::evaluateDependsAndDependsNot()
Value element exists; excecute checks
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showDataFileDialogValidator_default
is validator: true
TRACE [iaxxgenimp.cpp:304]
CGuiEngineImp::showDialogCalledByJs()
Dialog dPRCDataFile was skipped because of ( getCurrentDialog()->skip() or !getCurrentDialog()->shallShow() )returns true.
TRACE
The step showDataFileDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:12
Execute step getDataFile of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_getDataFile_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|getDataFile returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_getDataFile
is validator: false
TRACE [syuxcfile.cpp:344]
CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PREREQUISITE_CHECK_DATA.XML, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file /sap/inst/SOLMANMaster/IM_LINUX_X86_64/COMMON/INSTALL/PREREQUISITE_CHECK_DATA.XML to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PREREQUISITE_CHECK_DATA.XML
INFO 2006-05-15 10:56:12 [syuxcfile.cpp:574]
CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PREREQUISITE_CHECK_DATA.XML, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file '/sap/inst/SOLMANMaster/IM_LINUX_X86_64/COMMON/INSTALL/PREREQUISITE_CHECK_DATA.XML' to '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PREREQUISITE_CHECK_DATA.XML'.
TRACE [iaxxbfile.cpp:189]
CIaOsFile::copyFromPath_impl()
CSyFile::copy done.
TRACE [syuxcfile.cpp:344]
CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PRC_SHIPMENT_DATA.XML, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file /sap/inst/SOLMANMaster/IM_LINUX_X86_64/COMMON/INSTALL/PRC_SHIPMENT_DATA.XML to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PRC_SHIPMENT_DATA.XML
INFO 2006-05-15 10:56:12 [syuxcfile.cpp:574]
CSyFileImpl::copy(const CSyPath & /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PRC_SHIPMENT_DATA.XML, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file '/sap/inst/SOLMANMaster/IM_LINUX_X86_64/COMMON/INSTALL/PRC_SHIPMENT_DATA.XML' to '/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PRC_SHIPMENT_DATA.XML'.
TRACE [iaxxbfile.cpp:189]
CIaOsFile::copyFromPath_impl()
CSyFile::copy done.
TRACE
The step getDataFile with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:12
Execute step prepareServicesTable of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareServicesTable_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|prepareServicesTable returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareServicesTable
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_update
displayName:J2EE Engine Update
}, WHERE id = 'j2ee_update'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_workplace_inst
displayName:Developer Workplace
}, WHERE id = 'j2ee_workplace_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:abap_db_inst
displayName:Database Instance (AS ABAP)
}, WHERE id = 'abap_db_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:abap_ci_inst
displayName:Central Instance (AS ABAP)
}, WHERE id = 'abap_ci_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:abap_scs_inst
displayName:Central Services Instance for ABAP (AS ABAP)
}, WHERE id = 'abap_scs_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:abap_di_inst
displayName:Dialog Instance (AS ABAP)
}, WHERE id = 'abap_di_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_db_inst
displayName:Database Instance (AS Java)
}, WHERE id = 'j2ee_db_inst'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_ci_inst
displayName:Central Instance (AS Java)
}, WHERE id = 'j2ee_ci_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_di_inst
displayName:Dialog Instance (AS Java)
}, WHERE id = 'j2ee_di_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:j2ee_scs_inst
displayName:Central Services Instance (AS Java)
}, WHERE id = 'j2ee_scs_inst'), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCServices.updateRow({
id:pi_inst
displayName:PI Usage Type
}, WHERE id = 'pi_inst'), inserting
TRACE
The step prepareServicesTable with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:13
Execute step showServiceDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showServiceDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|showServiceDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showServiceDialog
is validator: false
TRACE
The step showServiceDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:13
Execute step prepareDBInfoTable of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareDBInfoTable_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|prepareDBInfoTable returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareDBInfoTable
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:ada
displayName:MaxDB
}, WHERE ROWNUM = '0'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:ora
displayName:Oracle
}, WHERE ROWNUM = '1'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:db2
displayName:IBM DB2 UDB for zLinux and z/OS
}, WHERE ROWNUM = '2'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:db4
displayName:IBM DB2 UDB for iSeries
}, WHERE ROWNUM = '3'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:db6
displayName:IBM DB2 UDB for UNIX and Windows
}, WHERE ROWNUM = '4'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBTypes.updateRow({
id:mss
displayName:MS SQL Server
}, WHERE ROWNUM = '5'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCConnectMethods.updateRow({
id:URL
displayName:JDBC URL
}, WHERE ROWNUM = '0'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCConnectMethods.updateRow({
id:SecStore
displayName:Secure Store
}, WHERE ROWNUM = '1'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBRoles.remove(WHERE 1=1)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBRoles.insertRow({
id:j2ee_db
}), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBRoles.insertRow({
id:abap_db
}), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBRoles.updateRow({
id:j2ee_db
displayName:Database for AS Java
}, WHERE ROWNUM = '0'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBRoles.updateRow({
id:abap_db
displayName:Database for AS ABAP
}, WHERE ROWNUM = '1'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCDBInfo.insertRow({
service:j2ee_db_inst
serviceDisplayName:Database Instance (AS Java)
dbRole:j2ee_db
dbRoleDisplayName:Database for AS Java
showDBInfoDialogs:false
dontCheck:true
}), inserting
TRACE
The step prepareDBInfoTable with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:14
Execute step showDBInfoOverviewDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showDBInfoOverviewDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|showDBInfoOverviewDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showDBInfoOverviewDialog
is validator: false
TRACE
The step showDBInfoOverviewDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:14
Execute step postProcessDBInfoOverviewDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_postProcessDBInfoOverviewDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|postProcessDBInfoOverviewDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_postProcessDBInfoOverviewDialog
is validator: false
TRACE
The step postProcessDBInfoOverviewDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:14
Execute step prepareSapInfoTable of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareSapInfoTable_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|prepareSapInfoTable returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareSapInfoTable
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCSapSystemRoles.remove(WHERE 1=1)
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCSapSystemRoles.insertRow({
id:j2ee
}), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCSapSystemRoles.insertRow({
id:abap
}), inserting
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCSapSystemRoles.updateRow({
id:j2ee
displayName:SAP System based on AS Java
}, WHERE ROWNUM = '0'), updating
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
tPRCSapSystemRoles.updateRow({
id:abap
displayName:SAP System based on AS ABAP
}, WHERE ROWNUM = '1'), updating
TRACE
The step prepareSapInfoTable with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:15
Execute step showSapInfoOverviewDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showSapInfoOverviewDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|showSapInfoOverviewDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_showSapInfoOverviewDialog
is validator: false
TRACE
The step showSapInfoOverviewDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:15
Execute step showDialog of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|PrerequisiteCheckerDBDialogs|ind|ind|ind|ind|0|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDBDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDBDialogs_ind_ind_ind_ind_DialogPhase_showDialog_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|PrerequisiteCheckerDBDialogs|ind|ind|ind|ind|0|0|showDialog returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDBDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDBDialogs_ind_ind_ind_ind_DialogPhase_showDialog
is validator: false
TRACE
The step showDialog with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|PrerequisiteCheckerDBDialogs|ind|ind|ind|ind|0|0 has been executed successfully.
INFO 2006-05-15 10:56:15
Execute step prepareChecks of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareChecks_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|prepareChecks returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_prepareChecks
is validator: false
TRACE
The step prepareChecks with key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0 has been executed successfully.
INFO 2006-05-15 10:56:15
Execute step runChecks of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_runChecks_Preprocess
is validator: false
TRACE
Execution of preprocess block of |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks returns TRUE.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:PrerequisiteCheckerDialogs_ind_ind_ind_ind
function:PrerequisiteCheckerDialogs_ind_ind_ind_ind_DialogPhase_runChecks
is validator: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
PrerequisitChecker runChecks
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite checker: Reading data from /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/PREREQUISITE_CHECK_DATA.XML
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite checker version is 1.1
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite check data version is 1.1
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
OraVersion.createFromString() version: 1.1
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
OraVersion.createFromString() version: 1.1
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
OraVersion.createFromString() version: 1.1
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
OraVersion.createFromString() version: 1.0
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package network::network match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package ::j2ee_update match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package ::pi_inst match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package ::abap_ci match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6892
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os::os_unix match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6893
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_unix::os_unix_64 match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6894
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_64 match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6895
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_64_rhel match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6896
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os::os_windows match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6897
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_windows::os_windows_32 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6898
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_sun::os_sun match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6899
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_true64::os_true64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6900
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_aix::os_aix match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6901
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_hp::os_hp match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6902
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::j2ee_linux match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package db_db6::os_linux_db_db6 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6903
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_32 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6904
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_ia64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6905
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_ppc64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6906
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_x86_64 match result is PRCCondEvalResult.OK. The package has been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_rhel4_x86_64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_sles9_x86_64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [syuxctask.cpp:1355]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 6907
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker: Collecting condition packages: Package os_linux::os_linux_s390x_64 match result is PRCCondEvalResult.FALSE. The package has not been selected for checking.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker performing checks: Condition network::hostname from package network::network evaluated to PRCCondEvalResult.OK. Message: 'The host name has to be an alphanumerical string of characters [A-Z] and [a-z] and digits [0-9], and the hyphen (or minus) character "-". Although the newer RFCs permit host names beginning with digits, we recommend that host names begin with an alpha character. Maximum host name length is 13. Current host name: gadamer. See also SAP Note 611361.'.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker performing checks: Condition os_rlimit::rlim_soft_lesseq_hard from package os::os_unix evaluated to PRCCondEvalResult.OK. Message: 'A soft resource limit has to be less than or equal to the corresponding hard limit. This is not the case for the following limits: None.'.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Prerequisite Checker performing checks: Condition os_ram::os_ram_unix from package os::os_unix evaluated to PRCCondEvalResult.OK. Message: 'For the selected services at least 128 MB RAM are required. Current value: 3959 MB. If the current value is much lower than the required value this will significantly slow down the installation or make it even impossible. In this case stop the installation, add more RAM and start it again.'.
TRACE [iaxxejsbas.hpp:281]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown std::bad_cast: St8bad_cast
ERROR 2006-05-15 10:56:18
FCO-00011 The step runChecks with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|2|0|runChecks was executed with status ERROR .
TRACE
<html><head></head><body><p>An error occurred while processing service <b>SAP Solution Manager 4.0 > SAP Systems > Oracle > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Regards,
Tommaso -
Text Size When Printing Comments Different Than On-Screen
Hello. We are supporting an end-user with an unusual problem. They are able to make sticky comments fine and adjust the font size on screen. However, when this user goes to print either to a physical printer or a PDF, the font size of the comment is different (smaller) than what is shown on screen.
On-Screen Example:
Print To PDF Example:
Is there an option to match the text size of the printed version to that of the on-screen? Even if the printed text size can be bumped up just a bit, it'd be greatly appreciated. The font size when commenting on-screen is 18 Arial but it seems like the printed version is more like 10 Ariel.
Thank you.Just tried the latest version of Adobe Reader and the same issue occurs. Making the on-screen font size 70 in the Commenting Preferences field makes NO CHANGE when printed (comes out at about 10 / 12 point font). Even the Print Preview doesn't show the larger font so there's some setting getting lost when you go to print.
Talking to our client, this problem likely coincides with Adobe updates that were pushed out. This is easily reproducible (anyone with an up-to-date version of Adobe Reader can do this) but doesn't seem to be a fix.
Any help out there? -
Memory parameters settings as per RAM and swap size
Hello Experts,
We have installed the newly SAP systems (Solman 7.1, ECC6 EHP 5, and CRM EHP1), below is the platform-
OS - Linux x86_64
RAM - 20 GB (ECD ABAP and solman (ABAP+JAVA)) and 24 GB (CRM ABAP).
swap size is twice of RAM.
Kernel - 720 64bit
Current memory parameters values are (by default) -
ztta/roll_area 6500000
ztta/roll_first 1
ztta/short_area 3200000
rdisp/ROLL_SHM 32768
rdisp/PG_SHM 32768
rdisp/PG_LOCAL 150
em/initial_size_MB 4096
em/blocksize_KB 4096
em/address_space_MB 4096
ztta/roll_extension 2000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
abap/heap_area_total 2000000000
abap/heaplimit 40000000
abap/use_paging 0
Could anyone suggest the calculation for above parameters so I can tune it according to my platform to avoid any memory bottleneck.
Regards
Saurabh MishraHI
For 20 Gb Instance For 24 GB
ztta/roll_area 6500000 em/initial_size_MB 16000 MB
ztta/roll_first 1
ztta/short_area 3200000
rdisp/ROLL_SHM 32768
rdisp/PG_SHM 32768
rdisp/PG_LOCAL 150
em/initial_size_MB 12000
em/blocksize_KB 4096
em/address_space_MB 4096
ztta/roll_extension 2000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 10000000000
abap/heap_area_total 12000000000
abap/heaplimit 40000000
abap/use_paging 0
and Configure ABAP Buffer abap /buffer size of 800 MB(Initially)
CUA and Screen Buffer of 20 Mb each.
The lowered values because DB Should be considered while changing SAP Memory,even though memory is allocated on need basis.
Regards
Arun.H -
How can I increase the thumbnail size when using Safari to upload an image to a website?
I upload many images to multiple websites and when using Safari to upload these images, the thumbnails are so small I can barely make out what the image is. I can easily figure out how to increase the thumbnail size when viewing them in Finder and set the default to my liking, but I cannot seem to find a way to do this in Safari. The last topic I saw on this was form 2013 and have not seen any update. Is there a way to do this?
Delete all unused, invisible layers.
Sometimes zip compression is better than jpg compression (in the pdf output settings). Zip is lossless, and works better with non gradient colour or no images.
Flattening the image before you save it to pdf can reduce the file size if you are using jpg compression.
Post a preview of your pdf and we can comment further on how to reduce the file size. -
I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.
Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.
-
Swap size limitations / default rules
I've been playing with software raid to speed up my hd performance.
I currently have 4 x 160 gig hd's (2 x sata & 2 x pata).
I got my 4'th hd today, so I did a clean install (got too much spare time) and for some reason decided to set my swap to 1gig on each drive witch should be 4gig total (just to be sure).
However, after getting my system up and running, checking with gnome-system-monitor & top, I see only 2gig of swap space is in use.
I did a quick search here on the forum & google, and it seems that by default swap is 2 x ram, I got 1gig ram so it add's up.
I checked :
[root@Cray loke]# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [multipath] [raid6] [raid10]
md1 : active raid0 sdb2[0] sda2[1] hdb2[2] hda2[3]
3919360 blocks 64k chunks
md2 : active raid0 sdb3[0] sda3[1] hdb3[2] hda3[3]
15229184 blocks 64k chunks
md3 : active raid0 sdb4[0] sda4[1] hdb4[2] hda4[3]
605577792 blocks 64k chunks
md0 : active raid1 sdb1[0] sda1[1] hdb1[2] hda1[3]
96256 blocks [4/4] [UUUU]
unused devices: <none>
And did a speed test comparing /dev/md/1 (swap) & /dev/md2 (/)
[root@Cray loke]# hdparm -t /dev/md/1
/dev/md/1:
Timing buffered disk reads: 366 MB in 3.01 seconds = 121.61 MB/sec
[root@Cray loke]# hdparm -t /dev/md/2
/dev/md/2:
Timing buffered disk reads: 348 MB in 3.02 seconds = 115.40 MB/sec
Looking at the speed, the swap file is using 4 drives but only 2gig of the 4 available, I doubt I ever going to use all the swap space, but since its already there and I'm not gonna add more hd's anytime soon, why not have it all available .
So my question is, where do I alter / force the swap size to go byond 2gig or 2 x ram?
Thanks.kth5 wrote:i think that in this case the oh so great 32bit addressspace limitation comes into effect.
after this the total can only be 4gig of memory which is presented by swap and physical memory together. so if you have 2gigs physical memory in your machine that's it. no way to have another 4gig swap. anyway, as you only have one it might be the md setup or swapfs limit after all, then i have no idea.
you may want to look into highmem support etc. in the kernel, but i actually doubt that it'll help much.
I too would say that this could be the result of a 32bit cpu and addressing range. I have done some research on a similar subject, how to get 4GB of physical RAM working under various windows OS-s, and found out that most motherboards don't even have the address space for reaching those 4 GB. In other words, you may have 4x1GB sticks in your mobo and it can even "officialy" support 4GB ram, but you would get 3,3 or 3,5 if you're lucky, because the rest of the address space is used for addressing various I/O devices, like usb, firewire, ata/sata, pci bus, and so on. Things get more complicated from there on, since better motherboards can have the last GB moved up into "5th" GB address space so you don't "loose" it.
And the reason for me writing this is to also suggest enabling highmem support in the kernel. -
Print size does not default to form size when printing PDF form.
So, we have created an interactive new client form for our firm. The form was created in LiveCycle Designer ES 8.2 and is set to legal size (8.5 x 14). After the form was completed and exported, it was filled out for testing and printed. During the printing process it was noticed that in the print dialog box, the dimentions for the form were wrong. It showed that the default document size was 8.5 x 11. Where and how is this changed in LC?
A new form was created (starting from scratch) with the document settings set to legal again, and inside of LC in the PDF preview panel, I tried to print and the same thing occured.
Please advise as how to set the document to its default size when printing without have to do it in the print dialog box.The print dialog doesn't display the forms dimensions but those of the currently selected paper format of your printer.
If you change the page format in the printer driver the diemensions in the preview will change too. -
File sizes when burning in different formats
Like many people, most songs in my playlists are MP3s/MPEG.
If I want to burn 20 songs as an Audio CD (to play in a car's CD player) and select same in Preferences>Advanced, I understand that the files will be uncompressed to something like AVI format.
My playlists show (at the bottom) file sizes of 50MB to 70MB. Obviously, the real size when uncompressed is something nearer 700MB. It means a bit of guesswork as to how many songs I can burn on one CD.
Similarly, when burning Data CDs, the file size will be much reduced.
Is there a way I can ascertain the exact file size when burning in different formats?+"It means a bit of guesswork as to how many songs I can burn on one CD."+
For audio CDs, there is no guesswork required. At the bottom of the playlist that you are about to burn, you will see the number of songs and the total time. If the time is under 80 minutes, the list will fit on a normal audio CD. If it is approximate, like "1.2 hours," click on it and it will change to exact hours, minutes, seconds. -
My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!
When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them. By the way, do your friends click on the photo attachment in the mail to open it?
Maybe you are looking for
-
How do you add files to a target of an Xcode project from the terminal?
Hi friends. I am building a tool to build projects in an automated way. So far it is working great but I can't find a command to add files to a target from the command line. Basically what I want to do is the following: I have a directory with the XC
-
DND Tables with JTextField Editors Mouse Problem
Hello! I am trying to be able to drag and drop between two tables and within a table and also use a TextArea as the editor of the cells. I am having the following problem: When I click on a cell both the drag_start and the cell is in editor mode so I
-
Aperture 3 bug:Failed to create bitmap context color transform
*Aperture 3 error*: Aperture[2000] <Error> Failed to create bitmap context color transform Aperture[2000] <Error> CGBitmapContextCreateWithData: failed to create delegate Using Aperture 3.03 and Mac OS 10.6.4, all updates included. This is the Consol
-
[SOLVED]wlanwep encryption is failing after system update(pacman -Syu)
After a system update with "pacman -Syu" my wlan encryption does not work anymore. If I switch off encryption on my access point, I can communicate without any problems. I have currently two wlans active, one with encryption, one without. I use the f
-
Problem importing/adding music
My wife's iPod recently was erased by iTunes. Don't know why, but it happened. So, fearing that iTunes might delete what was on the computer too, I decided to backup her iTunes music folder before re-syncing(which is on an external hard drive)by maki