Swapping between 801.2X and something else - vanished buttons

I use my computer at home and at uni, and must swap between two different servers and airport systems (although I'm not entirely sure of the technical stuff) and the buttons for doing this have disappeared. I took them for granted, so never really paid much attention to what they said, but I know they're gone!
I had to go into 'Internet Connect' then up the top there was a row of buttons, and I had to swap between 801.2X for uni and something else for home. These are the buttons that have disappeared.
Does anyone have any ideas where they might be? It makes it very hard to swap between the two now, and I never know if my internet will work properly.
Thanks!

If only life was that simple! I already have them set up as different locations. I was told when I first set up for the uni system that if it wasn't working, to change from VPN (home) and 802.1X (uni) in at the top of the 'Internet Connect' box. It's these buttons that have disappeared, along with 'Airport' and 'Summary', and the option for adding a new 802.1X connection is greyed out in the File menu (although the New VPN Conenction one isn't).
Thanks for trying, that would be a great idea, but it's already been done... Any more ideas?

Similar Messages

How can i troubleshoot a "software conflict between a device and something in my original user account"

hi
my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
i changed to another account on my iMac and my camera connected immediately.
is anybody able to explain how i go about fixing this "software conflict".
many thanks
Carlo

With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
Delete the Outbox.mbox and empty the Trash.
Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

On my list of calls made/received some of them have an icon which is a phone handset and something else. Can you tell me what this is and where to I D icons?

On my list of incoming/outgoing phone calls some of them have an icon beside the name which is a telephone handset and something else I don't recognize. Can anyone tell me what it means and where to find a list of icon explanations? Thanks.

You're probably talking about the handset with an arrow pointing up and to the right. That indicates an outgoing call.

Swap between Droid 2 and Storm 2

I currently use a Droid 2 Global and love the android OS. However I need to support the BlackBerry server and business apps than run on the BlackBerry OS. I need to use and be much more familiar with the BlackBerry phone. I would like to keep the Droid around for testing in the future and use the Storm more day to day.
If I purchase a BlackBerry storm 2 and subscribe to the BB plan, could I swap back and forth between the droid and storm relatively easily?
What are the potential pitfalls of purchasing a new Storm via eBay or some other outlet?

This sounds like a plan ... the top business communication platform for day-to-day, and you can still stay current with what's going on with Android.
The BlackBerry Internet Service plan has a different code than the smartphone data plan, so the swapping might not be seamless. You may have to call customer service, but they will happily do this for you. I've done it many times. You may want to ask though if you're limited to two plan changes per month.
Re: the Storm 2 ... I am a big fan of buying phones on eBay. However, because the S2 has some glitches, I would probably feel more comfortable buying a certified preowned from this site ... at least you know it's gone through testing. It's $70 on a one-year, so you can still upgrade in 10 months when newer BlackBerry models are out. If you really don't want to burn your upgrade, then hopefully you can find something affordable yet fully functional on eBay.
Good luck!

No AltGr in X and something else...

I'm using ion2 and I can't get AltGr characters in any app.
However it works in command line outside X...
My kbmap is pt-latin9.
is this a xorg or a ion problem?
Something else:
How do I change the default font size in xterm?

Alexo wrote:I'm using ion2 and I can't get AltGr characters in any app.
However it works in command line outside X...
My kbmap is pt-latin9.
is this a xorg or a ion problem?
Does
setxkbmap pt
work? If yes, put it in your .xinitrc or .xsession
Alexo wrote:Something else:
How do I change the default font size in xterm?
Put
xterm*faceSize: 14
in ~/.Xdefaults (14 is the default size)
Run: xrdb .Xdefaults
and start xterm to check the changes. I haven't tried it, though.

How can I have an object toggle between fade out and fade in with button?

Hello all,
I have a problem and I was hoping someone out there could help me out with it.
I have smart shape that is set to show for "rest of project" on one of my early slides. It is not visible in output in the properties, but when a user clicks a button in the project, it should fade in and then stay visible. If the user clicks the same button again, it should fade out and stay hidden. So rather than toggle between show and hide, which I know how to do, I want it to toggle between fade in and fade out. I am having trouble with this. Setting its transition to fade in and fade out in the properties of the smart shape doesn't help...
Here is the advanced action I have attached to the button that should allow the user to toggle between fade in and fade out. The "if" parts works -- the object fades in and then finally "shows" at 100% the "else" part almost works. It fades out, disappears, but then shows again, which I obviously dont want it to do. I want it to stay hidden.
If you can help, it would be great!!

I Don't
But as a work around you could try increasing the canvas size to match the illustrator file, paste in the object then crop off the excess canvas in photoshop

Swapping between client database and web database

Hi i have completed tutorials etc so can now create the
sqlite database for my application which is downloaded by the user
and will run on thier desktop so i am calling it the "client
database" which contains data they are working with but there is
another database containing identical tables which i am calling the
"global database" the idea of this is to transfer data between the
different clients and backup that information.
so i am looking for a tutorial or a sample app where the app
takes information from a web based database and copy's that rob
into a sqlite database on the clients machine?
this is the main problem im having and seen people mentioning
blaze DS and stuff like that, ideally i wouldn't like to use PHP
but atm is looking like i may have to.
i will sell my soul to anyone who can help with this lol
(also i am using FLEX 3.0)

Hi,
Yes, if you use LCDS everything is there already for you, so
that you can complete this application in very less time. Since you
want to use PHP, you can use Zend PHP, which will support Remoting
using AMF. Using Zend PHP, write PHP classes which will help you to
synchronize data between server and client and just invoke those
from your Flex application when required.
Hope this helps.

Lost my playlists and something else :o(

I have a MacBook Pro, with the HD partitioned into "Mac HD" and "Audio". I have a rather large music library on "Audio" that is linked to my Serato library.
Today, I noticed that some of my playlists were missing.
I found this online: iTunes: How to re-create your iTunes library and playlists - Apple Support and followed the instructions. I have now gone from well over 22000 songs, to just over 5000 tracks.
I noticed there are 2 iTunes libraries on my mac. One on "Mac HD" drive which appears to be about 30 gb, and another on the "Audio" drive (where I have set iTunes as the default drive and folder for my music).
The playlists I was looking for were not restored with the above process. However.... When I do a Spotlight search, I can find the name of the playlist I'm missing on a file called music.txt. How do I get all this back to normal?

I should add, when I started the process from the link above, iTunes started dumping audio onto my "Mac HD" drive... something I didn't want to do. I only have about 20gb free space there now

Two possibly unrelated questions - Hard Drive and something else.

Sorry I only have symptoms not specifics at this point. I have an intel core duo mac mini, running 10.5.6, with 4 gigs of ram. I have a couple of issues that may be unrelated: A possible Hard drive issue and another strange issue. I don't know if there are related but since I may have to go through the hassle of cracking open my mini I thought I would ask.
First issue when I stream video over the internet sometimes and only sometimes my machine will suddenly restart, no shutdown, no prompts, just instantaneously restart, other times it will stream hours of video without issue. This issue has plagued me since 10.4 and all subsequent upgrades.
Second issue is what I believe is a hard drive failure, but I'm not sure and I don't want to buy/replace it if that's not the issue. I updated to 10.5.6 a few months ago and was running with no issues although lately it has been getting slower. Last week my parents came over to watch "24" online so after working on my computer all morning I restarted my machine thinking it would stream better, upon restart it would get to the large apple with the spinning graphic and hang up, then about after a minute in it would simply power off. Confused I restarted with the same results. I tried this probably 10 times with the same result. Checked all the cables, etc. nothing. so next I booted into the Leopard Installer and ran disk utility. At first the hard drive didn't show up in the left column so I quit disk utility and launched startup disk, again no hard drive, then I re-launched disk utility - now it showed up. I ran repair disk since repair permissions was greyyed out. It came back with errors saying disk couldn't be repaired. Sorry the only error message I recall is a damaged catalog B-tree. So I restarted and for the first time in 10 hours my machine actually restarted and everything came back. From here I backed up everything important. Since then it has restarted 3 times will no issues, other than running a little slower than usual. So last night I ran Disk Warrior and receive the error message. " Could not rebuild due to a disk malfunction. A disk malfunction is a failure of or damage to any mechanical component of the disk device or any component connected to it. Since I had disk warrior in there I checked the hardware test option where it checks the S.M.A.R.T. something or another, sorry for the choice of words I've never done that, and it returned saying the drive was fine. So here I am a bit confused if it's the hard drive or another issue any ideas.

Hi daredman01-
Could the unit simply be overheating? Have you vacuumed out the air vent that rns along the bottom edge of the mini?
Good job getting things backed up. How full is the hard drive?
Luck-
-DP

E2000 Opening NAT, and something else

Hi all. My title is pretty self-explanatory - I'm looking to open the NAT. The network in this house was set up by someone a bit more computer savvy; unfortunately he's no longer available and I can't get his input on it.
I'm trying to just follow a guide I found elsewhere. However, giving the IP address to a browser asks for a username and a password. I do not have these, and the defaults (admin as I understand) don't work. Solutions? I suspect the person who set it up used his own password, but that doesn't help now.
My other problem is something that could be anything. I'm a gamer and this is why I want to open the NAT. That said - I've NEVER had connection problems of any sort beyond not being able to use a mic on the Xbox sometimes, even with a moderate NAT. Lately, however, I can't go five minutes without crippling lag. Any ideas on that would be appreciated.

Okay Im having some serious issues, Ive followed the guide to the last word and every day i have to reset my router at least 10 times and repeat this process over and over until the darn thing works again. I cannot connect to my friends on live my connection is terrible and im always glitching out of games I am in S.O.S mode and this ship is quickly sinking and my frustration level is about to pop. If it helps im wired into my router but can also go wireless on my xbox 360.

Progressively slower renders and something else...

First... does anybody know why FCP renders my timeline over again when I "edit to tape"? I'm rendering everything in the timeline just before I put to tape... and my output settings match the timeline settings...
also, the renders seem to slow down at the 10-15% mark... if I stop and start the render again it'll go up to 10-15% in seconds...
No. I'm not rendering the same thing over and over again... and It's mostly motion stuff, with 2,3 sometimes 10 layers of video. I've monitored drive speed, processor usage... everything seems to run fine.
It's a well maintained and stable system.
Thanks

First... does anybody know why FCP renders my timeline over again when I "edit to tape"? I'm rendering everything in the timeline just before I put to tape... and my output settings match the timeline settings...< </div>
This has been a weird thing about FCP since v1 or v2. I don't think we have ever gotten a satisfactory answer.
Michael's suggestion to export self-contained, reimport the new movie, and place it in your edit to tape process is pretty much what we've all been doing for several years. When Apple disabled timecode to the dsr-11, many of us started building entire sequences including slate, tone. bars, countdown.
bogiesan

Gmail fetch problem and something else

Hi,
I have set up on my iphone ver 2.2 the gmail imap acount through the iphone.
Fetch is set to 30 mins, i've disabled push bcz gmail does not support push anyway (apart from android so they say) and to reduce battery use.
Two issues I can't seem to solve:
My phone does not fetch while in sleep, if I dont touch it for more than 30 mins, I open it and it shows last updated in a time more than 30 mins. sometimes even 2 hours and no fetching.
Other thing - that may be the cause: when i wake up the phone from sleep - unlocking it, and going to the gmail and pressing update manually (due to the problem i described before) the iphone cant connect to the wifi on first time and gives me msg regarding unable to connect to 3G (I've disabled that throgh the iphone option and through my cellular company - I dont have a data plan).
After getting those cant connect to 3G msg's i press again and then it connects and download the emails - if there are new ones.
I have a wireless router that i configured with my iphone - safari doesn't seem to have problem connecting from sleep right away.
Any suggestions?
Thanks,
Nitay

Hi,
I can already state that the problem still exits, I already got the message 'no cellular data available...' followed by 'cannot connect to smtp.gmail...
Which I think it may be the issue causing the problem of periodically fetch. (Since it can't connect to the server for some reason).
Any ideas?
Thank again

My firefox home page is gone and something else is in its place

When I was downloading a game, it gave me a new home page. My firefox home page is gone. I'd like it back. I won't mess around with those game things again.

Firefox determines your current locale and presents pages in the local language.
#You may need to (re)set the pref general.useragent.locale to the preferred language (e.g. en-US or en-GB) on the about:config page. See: http://kb.mozillazine.org/General.useragent.locale
#*You can open the about:config page via the location bar, like you open a web site.
#*Use the Filter bar at the top of that page to quickly locate the pref.
#*If you travel frequently to other language locales, you may want to try this add-on: https://addons.mozilla.org/en-US/firefox/addon/1333/
#If you have the Firefox user interface (menu bar) in the wrong language then you can get the language version of your choice here: http://www.mozilla.com/firefox/all.html
#*Reinstalling Firefox won't affect the data in your profile folder (e.g. bookmarks and cookies and passwords), but make sure that you do not choose to delete files in the profile folder in the uninstall window.
#If the Google or Yahoo page is in the wrong language then see:
#*Google: http://www.google.com/support/bin/answer.py?answer=873
#*Yahoo: http://help.yahoo.com/l/us/yahoo/homepage/troubleshooting/troubleshoot-02.html

Venture Siggy with Chip Design and Something Else

I have never had a Venture before this one that came today and I love the design! It is very slick. I dont know if they recently revamped the design, but they did a nice job. Also, Cap one now has the option to consolidate your credit lines in your online account management into 1 card if you so choose and it says it will take less than 5 minutes! I am thinking of combining my 2 QS's and the Venture Siggy all to the Venture Siggy since I already use my Cash Rewards for rewards and have SD'd my 2 QS's. I knew you could combine limits before, but wasnt sure if there was an option to do this yourself in your online account access. Thoughts?

NP27 wrote:
FinStar wrote:
NP27 wrote:
FinStar wrote:
NP27 wrote:
Venture and 1 QS= 0 balanceOther QS=balanceYou Venture card would need to wait before it's eligible to be combined (provided this is your newly acquired CC). The QS with the 0 balance can be moved/merged with the other QS with the balance (but not the other way around) - someone correct me if I'm wrong.The Venture is the new CC. If after I combine the 2 QS's(either way one with the other balance or not is OK) would I be able to combine the combined QS's into the Venture when the Venture is eligible to be combined? Lol....sorry if I am confusing anyoneYou should be able to do so provided the larger/combined QS does not have a balance or any pending transactionsbefore being merged onto Venture. The online feature will let you know whether the cards can be merged or not.great...and this is at Venture 6mos old or more?Correct. Once it has reached the 6-month mark (or greater).

Share cinema display between Mac Mini and MacBook Pro

Hello -
I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use.
How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one input in the LED cinema display ???
Thanks in advance.
Andrew

Interesting - I have the same idea: sharing a 24" cinema display between a Macbook Pro for myself and a Mac mini for my wife.
The only problem I see is that the display doesn't have any Firewire ports. So if I want to use an external harddrive (or a mini-DV camcorder) on both computers when connected to the display, then I'd have to plug that into the computer instead of the display ...

Swapping between 801.2X and something else - vanished buttons

Similar Messages

Maybe you are looking for