Swapping eMac hard drives

Our eMac recently gave out & I don't believe it's repairable, however I do have several files & software on it that I still use. I have been able to find a "new" eMac in working order, however the newer model is a 1.25 GHz (post April 2004)  and my old one is a 1 GHz (pre April 2004). So my question is, would my old hard drive (which I believe is still good) be compatible with the newer machine if I were to swap them out? And if so, would my software still be there/usable afterwards (some of my install discs have been lost and damaged)? Thanks.
Dave Dobesh

edex67,
eMacs predate SATA. They use PATA drives:
http://www.everymac.com/systems/apple/emac/specs/emac_1.25.html
David,
A lot of 1,25G eMacs have bad logic boards--a lot!
See if the newer unit's serial number falls into these ranges:
G8412xxxxxx- G8520xxxxxx
YM412xxxxxx - YM520xxxxxx
VM440xxxxxx - VM516xxxxxx
The program that fixed the issue expired several years ago.

Similar Messages

  • Is The Best Way To Update OS to "Zero Out" eMac Hard Drive?

    Ok, so I've got the OEM Apple eMac Tiger installation discs and
    will be updating to Tiger 10.4+ in the next week or so.
    Here's my question: Is it better to "Zero" out the eMac Hard Drive
    (using the Apple installer/utility disc), or better to just proceed
    with the Tiger installation and select for my previous Apple OS 10.2.8
    to be automatically "archived" during the Tiger installation?
    I would assume that the "Zeroing out" process would be the best, even though
    the actual process of "Zeroing" the Hard Drive takes quite a long time.
    Any suggestions on the best way to prepare the Hard Drive for the Tiger
    installation would be appreciated.
    - David
    Message was edited by: DavidMac

    Is it better to "Zero" out the eMac Hard Drive
    Only if you're erasing sensitive data or experiencing problems with the existing system.
    (40722)

  • My Serial Won't be accepted after APPCARE swapped my hard drive

    Hey,
    A while back my hard drive started slowing down and having errors, and sometimes even spinning down while i was trying to access it. I got it warranty repaired at my local store. They swapped my hard drive or a new one, and reinstalled osx. They did not do backups of any kind, it was not necessary. But now that I try to reinstall my software that I purchased with the computer originally, the serials are not accepted and it won't let me install it on my computer.

    They did not do backups of any kind, it was not necessary<<</div>
    It wasn't? I think you've proved that theory wrong!
    -DH

  • Swap G4 Hard drive with G5 Hard drive.

    I was wondering if it were possible to swap two hard drives.
    I currently work on a G4 and am upgrading to a G5. Can i simply take out the G4 Hard drive and swap it with the G5 Hard drive.
    Then put the G5 Hard drive in the G4?
    Will the OS and programs work as usual?
    Both machines are running OS 10.4.9
    Thanks
      Mac OS X (10.4.9)  
      Mac OS X (10.4.9)  
      Mac OS X (10.4.9)  

    The software may work but the drives use different connectors. The G4 uses ATA, the G5 uses SATA. You can buy an adapter to use a G4 drive in a G5, but you would have to buy a PCI card to use a G5 drive in a G4. It would be simpler to connect the computers with a Firewire cable and copy over the files you need. You can use the Migration Assistant (Utilities folder) to do it.

  • Can I swap the hard drive from MacBook Pro 17 (2009) to MacBook Pro 15 (2006)?

    My MacBook Pro 17 (2009) died. Pushing the power button gets no response. I had had problems with it for some time turning it on, it usually taking many many tries. Plus when I'd try to do a restart after updating software, instead of doing so it'd shut off super quick with a *pop* sound. There was never any of the typical hard drive going bad sounds I've read about and seen in videos. Since it has refused to turn on I've gone through every suggestion I can find to get it to turn back on. Unhook the battery and try starting from just the power cord; the shorting the power pads move; some thing undoing the battery, counting to 10, and then the next steps now escape my memory, but doing more counting to 10 inbetween; unplugging the battery and leaving it sit for 2 days with no power cord plugged in either, then hook it to a power cord and turn it back on; and so many more.
    Also the symptoms just before this fiasco were as follows: I had a CD in the internal drive and was browsing through the images on it via the handy previewer using the space bar. Then I decided to quite, tried ejecting the CD by dragging the icon to the trash, and nothing. I tried again. The same. Then I pushed on the eject key, with the ejct icon popping up on the screen momentarily, but still nothing. Then it appreared as though some things worked and other things were not working. In my frustration I went to the Apple menu and clicked restart with a wince knowing it was going to take forever to turn back on. It did the usual quickly off with a *pop* and made super short lame attempts to turn back on when using the power button. Of course the CD kept trying to spin for a split second and then the little indicator light on the front would go out, then no noise at all.
    Since I do not believe it is the hard drive (of course I could be wrong not being a Mac nerd at all), I was wondering if I can switch the hard drive to my Macbook Pro 15 (2006)?
    I tried this, but it would not read the hard drive. Just a blank grey screen. If it is possible to do this swap, what are the exact steps to do? Please answer like I'm completely illiterate on this, because I really am. I'm super scared of losing everything on the dead MacBook's hard drive. Yeah yeah, I know: then why have I not been backing things up? I had the week prior. Believe me I WILL be doing it daily from now on if I get this mess straightened out!
    Here are the specs for each MacBook Pro:
    Name: MacBook Pro 17 (info gained from the serial on the bottom and then looked up online)
    Model: A1297
    Model Code: mbp_17_early_09
    CPU Type: Intel Core 2 Duo
    CPU Speed: 2.8GHz
    RAM Type: DDR3 PC8500 SODIMM 1066MHz
    RAM Slots: 2
    Max RAM by Slot: 2 x 4GB
    Maximum RAM: 8GB
    RAM Pairing: Modules may be installed individually
    Hard Drive Connection: SATA 300
    Hard Drive Platter Size: 2.5"
    Device Connectivity: USB 2.0, FireWire 800
    Video Output (base graphics option): Mini DisplayPort
    Expansion Slots: ExpressCard/34
    Max Operating System Version: 10.6.8 (I believe that is what was last on the computer)
    Name:    MacBook Pro 15" (retrieved from the System Profiler on this Mac)
      Model Identifier:    MacBookPro2,2
      Processor Name:    Intel Core 2 Duo
      Processor Speed:    2.33 GHz
      Number Of Processors:    1
      Total Number Of Cores:    2
      L2 Cache:    4 MB
      Memory:    3 GB
      Bus Speed:    667 MHz
      Boot ROM Version:    MBP22.00A5.B07
      SMC Version (system):    1.12f5

    OGELTHORPE really sorry to keep bugging you, but it's obvious you know what you are talking about and I'm stuck on thin ice here getting this fixed, because there are no authorized Apple reps here. I would rather shoot myself for messing up, then to trust someone who "says" they can fix my Mac down here.
    I checked out a company owned by ebay that is the same down here, called MercadoLibre. There are quite a few adapters listed there. I'd like to give you links for some and was wondering if you minded taking a look to tell me if any seem to fit the bill. Some have specs in English, others don't. (Google translater is my friend!)
    #1.  http://articulo.mercadolibre.com.uy/MLU-415826915-adaptador-usb-a-ide-y-sata-con -cables-y-fuente-envio-gratis-_JM
    #2. http://articulo.mercadolibre.com.uy/MLU-416270876-usb-20-to-ide-sata-25-35-hard- drive-_JM#D[S:HOME,L:HISTORY,V:1]
    #3.  http://articulo.mercadolibre.com.uy/MLU-416384859-adaptador-usb-20-a-sataide-_JM
    #4.  http://articulo.mercadolibre.com.uy/MLU-415596152-adaptador-usb-20-para-sata-e-i de-manhattan-_JM
    #5.  http://articulo.mercadolibre.com.uy/MLU-416061182-adaptador-de-usb-a-sata-o-ide- 3525-con-fuente-externa-_JM
    #6. http://articulo.mercadolibre.com.uy/MLU-416061069-convertidor-usb-20-a-sata-hdd- 25-soporta-hasta-1tb-_JM
    These are all cost effective enough that I don't care the price - cheap, expensive - whichever will work the BEST!
    I've also looked for the 7200 rpm HDD, and although I found some, I'll be danged if they are not 3.0, instead of the 2.5 that I have. Grrrr! I was willing to spend the $90 for 1tb... or being the non-techie that I am, can this 3.0 go into my 2006 MBP??
    Just so you can see what all is listed right now:
    http://listado.mercadolibre.com.uy/7200-rpm-hdd-2.5-macbook-pro
    Another newbie question: How do I check what the amount if RAM is presently installed in it? (I might be a greenhorn, but I take pride in not being a dumbie and I learn when taught)
    Right now, I'm willing to spend almost anything. I want a few files that are on the HDD at the moment that I was stupid and did not backup on my external. One file I worked on all day due to the dimensions I had to design it at and each effect took a long time to render. I really don't want to do that one again!.. I'm also willing to spend anything that won't cost me the price of a new iMac. Figure that should be the next one I buy that is affordable, but won't be overworked like the MBP was.
    Once again, thanks much for all of your help!

  • EMac hard drive dead?

    My eMac was running slow ... reeeeeeeally slow. Spent ages pondering every mouse click. Just opening folders was agony. I tried the usual round of fixes, some of which helped a little, but after a few hours' use, things would slow down again. Permissions repair got hung up 1/3 of the way through every time. Decided to try Disk Utility from the install disk; it reported an error (2STF/8/3: MAC-10 ata-4 - Master); research suggested that meant hard drive trouble. I tried reinstalling system software and now my Mac can ONLY restart from the Tiger disk --- it can't even mount the hard drive.
    Four questions:
    1. Does this mean what it looks like --- that the hard drive is dead?
    2. Is there any way to access the hard drive at this point?
    3. If the drive is dead, is it better to replace the internal drive or just get an external?
    4. Any recommendations as to brands/spex on replacement drive?
    Thanks in advance.

    Drives do die! I gather you don't have an external drive nor another Mac. Hope you don't have any important files to recover either.
    I had my iBook drive die a couple of years ago while visiting in Namibia on Christmas eve. It hadn't died completely. The local Apple dealer happened to be in his shop on the 26th. We were able to copy most things onto his computer and I bought an external drive and an OX 10.4 DVD. I set up the external drive with a new system and copied all my files to it. It took over 2 months before Apple were able to supply the correct parts but I was able to continue using the Mac during the wait. The iBook was still within the Applecare warranty period so there was no cost to me for the repairs. This procedure will work provided other components in the eMac are in good order.
    Access to the drive depends on how dead it really is. If the drive is not dead you should be able to reformat it from the Instal disc. If this fails then repair is an option.
    You will need to check whether any other parts need replacing. With my iBook one of the hardware control modules had to be replaced too. Once you know likely cost you should consider whether a new Mac is a more practical option - if you can afford one. You will get a better machine with better specifications for an effective price of new less repair costs.
    In terms of recommendations - an external Firewire drive with more than enough capacity for your needs. The advantage of this is that you can use it with any new computer you choose to buy later.

  • Can I swap my hard drive to another ibook g3?

    My screen has broken [liquid damage] and to get it fixed it'll cost £100-£300 and I don't know if it's just the screen gone. It will be cheaper probably to buy a new ibook off ebay and sell my ibook in parts. But I'll need to back up my 60gb hard drive. Firstly, how do I do that? If I remove it will my data all be gone? Can I install that in another ibook g3 [whether of same speed and RAM or not]? The hard drive is seemingly undamaged because the computer still turns on and surely you need data from that to power up - or at least it means the logic board is fine.
    Anyway, how do I back it up? Would it actually be better buying a new ibook off ebay - do I need the exact same specifications as mine in order to swap hard drives if that's possible
    thanks

    Steph,
    First what kind of liquid? Coffee, coke, wine and the like can be very corrosive to minute electrical traces on the motherboard.
    the liquid went onto the top part of the keyboard where the speakers and power buttons are found but may have got into the inner edge of the screen and obviously with that not going on it has broken it.
    Not necessarily the LCD but the cables for the LVDS and inverter go through that area. Also liquid in that area can easily find it's way to the logic board and that could be fatal. I intend to post instructions on dealing with liquid problems. First of all iBooks should have all power pulled and necessary drying out procedures initiated before attempting power up.
    the cursor is not moving so i guess that has broken and so i can't test if the keyboard is working because i can't get logged on. the battery has decharged itself so somehow liquid has got into whatever powers that up, maybe the adapter port as that's on the side?! it does still power up, i can hear it whirring, does that mean that the logic board is still ok? and when you said that if i have a working logic board i can recover data that way, does that mean if i put my logic board from my ibook into a new one, my data would still be on it?
    Your data is on the hard drive.
    and with the powering up but no screen image does it also mean that the hard drive is still intact?
    Probably. Will it go into target mode as in my first post?
    Richard

  • Decided to use MacService to swap my hard drive

    I have 80 gb hard drive that was running out of space. So, for 245, I got a 160gb Hitachi drive, which includes shipping, cloning the new drive, and installation. I went to the local MacMall and they wanted 350 to do it, or I could have bought the hard drive for 110, and the drive case for 40. That would have saved me 100, but that is not enough to get me to open the case, and swap it. I am pretty handy, and have even built a computer before, but I just did not want to mess with my powerbook that much. I will let you know how it goes. The web site is macservice.com.

    I just got my powerbook back today from Mac Service. I can't tell the difference at all. And that is great. The hard drive is now huge, my computer is working as fine as ever, and that is exactly what I wanted. Now, I can use my old hard drive as an external backup after I hop to MacMall in Torrance and get a case for it for about $30. While I am there, I may upgrade my RAM to 2 gb from the current 1 gb. The price for that will be about $60, since I have a Dec, 2005, model, with the PC 4200 ram.

  • Emac hard drive in external hard drive

    hi, couldnt find anywhere to put this. hope here is ok. I have the hard drive of my old emac in an external case at the moment, and was trying to get rid of all of it, in order to use it for storing some music on. firstly how is everything including the operating system itself removed? and can i use it as a regular external hard drive thereafter?
    any help is much appreciated.
    sam

    1. Click here and follow the instructions.
    2. Yes.
    (25811)

  • Swapping out hard drives - Quicksilver

    I have 2 identical G4 Quicksilver PowerMacs and the logic board is fading fast on the first one. The 2nd one has been offline for a few years now and I would like to move the drive with my apps and data from the 1st machine into the 2nd one (I started the 2nd one today and it ran great).
    Other than moving my drive to the 2nd machine, are there any other things that I should consider? Both drives are the same size, same make/model etc. I was going to move the larger RAM sticks to the 2nd machine and boot it up prior to the swap but cannot think of anything else that might be a show-stopper.

    Hello BB,
    I'm with Grant.
    I'm sure they do, but I've never seen a logic board fade fast, or slow; they usually work or they don't, and they don't fail very often.
    By, contrast, hard drives fail all the time - particularly when they're eight years old - and often in a protracted manner, so that you can see (or hear) their demise coming. It might be time to be sure you're backed up.
    If your Macs are absolutely identical, everything interchanges freely. (2001 and 2002 Quicksilvers, however, are not identical, as the 2001s do not natively recognise the larger [over 128GB] hard drives.)
    Dual processor Quicksilvers tend to run a little hot - some hotter than others - which can shorten component life. If you don't mind the extra noise, you can fit a more powerful CPU fan; makes it sound like a leaf blower, though.
    Regards,
    Jon

  • Swapping USB Hard Drives

    On my Mac Pro I replaced an 80GB USB drive called "Files" with a 500GB drive, and after restoring the "Files" volume from backup, decided that my 300GB USB "Music" drive would be a better home for my files, and the 500GB "Files" hard drive would have more space for my growing music library. After swapping the contents successfully on these two drives, I also swapped their volume names. iTunes has no problems finding its source files on the newly renamed "Music" volume, and similarly there's no problem with accessing the files on my "Files" drive.
    However, when connecting to these volumes from my Macbook Prod, the drives are backwards: opening "Files" brings up my music library and opening "Music" shows my files. I've rebooted each machine but that hasn't changed this behavior. Obviously I can continue to accommodate this quirk by opening the "wrong" drive, but I'd like to understand why this is happening and make it so that the Macbook Pro opens the volumes in the same way as they are on the Mac Pro to which they're attached.
    Thanks,
    Nick
    Message was edited by: nickditoro

    Try starting up from a system software CD or DVD, and repair your disk using Disk Utility:
    Insert the Mac OS X Install or Restore disc.
    Restart the computer, then hold the C key during startup.
    From the Apple menu, choose Disk Utility. Do this in the first screen of the Installer. Don't click Continue. If you click Continue in a Mac OS X Installer version earlier than 10.2, you must restart from CD again.
    Click the First Aid tab.
    Click Repair Disk.
    After repairing the disk, try to start from the Mac OS X hard disk.
    If you are able to start up in OS X, then go to Applications > Utilities > Disk Utility and repair permissions on the hard drive.

  • Swapping a hard drive from my mini

    I upgraded my mini to a 320 gig hard drive, and I'm selling it to buy a macbook pro. I'm going to swap the 250 with the 320. Will that just work or will I have to reload the OS? I've made a time machine back up. I've seen the option after you install OSX to retrieve data from a time machine back up. How well does that work. Are there any concerns I should have with loosing data in this process?

    You'll probably have to reload OSX as the MBP has new drivers (like GPU) that the mini never needed to have.
    Of course you can just hook it and see what hits the fan but I'd probably play it safe and reload the OS

  • Emac Hard Drive and Cleaning Question

    Hello to all,
    Sorry for all the crazy questions about this emac. I have never owned a mac before so this is a learning experience as I go and I hope no one minds the questions.
    Here is my latest question. I needed a new hard drive and it came out really easy. Within in about 20 minutes I had the hard drive out and in my hands. Wasn't as tough as I read. Anyway, my quesition is, I don't have the original software that came with the mac but I can get that from apple.
    If I would put a new hard drive in would I still need the original software for the mac or would I get a new disc with the hard drive that would now be the software for this mac?
    Also, I noticed on the green pc board that there is some slight corrosion around some of the solder points and things. Could I use a electronic contact cleaner on this to clean it up? Or is there anyway to clean it up safely without messing up the board. The mac runs but wanted to clean it up.
    Thanks for any help and sorry for the loooooooooong question.
    Xray

    Apple does not bundle Mac OS X with any replacement hard drives; you must purchase OS X (or contact Apple for a replacement set of the eMac's original discs) separately. You can then boot from the OS X Install disc, launch Disk Utility from the Installer/Utilities menu, and use Disk Utility to format (and if desired, partition) the hard drive as Mac OS X Extended.
    I've not heard of corrosion internal to the eMac. Do you know if the Mac was kept in an unusually humid or wet environment, such as a beach house? While contact cleaner itself should be harmless if it's dried thoroughly before re-powering the computer, I'd be reluctant to do any sorrt of scrubbing, even light pressure with a cotten swab, on the wires on the logic board.

  • Bad screen.  Will Apple Store swap my hard drive into new machine?

    I got my Macbook Pro 15" a week ago.  Within a couple of days it developed a prominent green vertical line near the center of the screen, top to bottom.  I have a meeting with a genius tonight.  I assume they'll give my a whole new laptop.  Can they swap out my existing hard drive to the new laptop?  It's not that I have a ton of user data, it's more that I have installed boot camp and Windows 7 on the other partition and it would be pain to backup both partitions before this meeting.

    So I took it to the Apple store tonight and they're going to replace the screen.  They didn't have one in stock so they'll order that and it will probably arrive mid-week.  Then I'll bring it back in, leave it overnight then come back again the next day.  Three visits for a broken screen on a week-old laptop!  I'm not too happy about that but at least I get to keep my HD.

  • Swapping multiple hard drives for Time Machine backups

    I would like to always have one external hard drive attached to my iMac for Time Machine backups, and another external hard drive off site - periodically swapping the two. The though is that if there is fire or theft, it won't help to have a hard drive onsite attached to the computer, because both the iMac and the hard drive could be lost.
    Is Time Machine smart enough to allow me to configure two drives, so that whenever I plug in one of the drives, it can figure out what needs to be backed up?

    I do the same thing, but I have to tell Time Machine each time I switch hard drives.  I have not figured out a way to automate it.  Might be better left manual.
    B

Maybe you are looking for

  • How to reduce execution time ?

    Hi friends... I have created a report to display vendor opening balances, total debit ,total credit , total balance & closing balance for the given date range. it is working fine .But it takes more time to execute . How can I reduce execution time ?

  • Apple TV video not working with receiver / amplifier

    My apple TV (latest model) is connected to my receiver Marantz sr5004  via HDMI.  My tv output from the receiver is conected using component (analog)  cables. Audio is working fine but video does not appear at all. I have modified the HDMI output set

  • AP 1262 don´t negotiate with Gig Interface

    Hi !! I have new 1262 APs, this have Gig Interface, when I connect the AP in my 6500 with PoE Gig Interface, the AP turn on, but the interface never get up. I need to change the speed to 100 in the 6500 switch port, when I do this, the interface beco

  • Session EJB REST/JSON annotations....?

    We are building a highly graphical, javascript-heavy application presently and require access to session EJB's. Access with SOAP based web services will be too heavy for the browser as we have quite a lot of data being passed to and fro. We really ne

  • Compressor audio Problem!

    Dear people, I have a problem with the audio peak. We did a studio shoot where the anchor speaks pretty dynamic. I tried the Compressor filter in FCP wanting to hold the peak at -10dB at the same time wanting to boost the weak signals but it somehow