Swapping hard drive of Random  Sudden Shutdown MacBook

So they've said they're going to give me a new MacBook since I've brought it in 3 times for RSS. My question is they've offered to swap my current hard drive into the new computer they're giving me. Do I have anything to worry about that the problem might somehow be connected to the hard drive? It's a pain to swap all my data and settings and what not, but I'm worried that I'll bring the problem with me to my new computer.
Any advice is much appreciated. Thanks

There should not be any problem, but if you didn't want to go that route, you could transfer data via FireWire target disk mode or use the Migration Assistant.
http://docs.info.apple.com/article.html?artnum=58583
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

Similar Messages

  • Can I swap hard drives between working and nonworking MacBooks?

    I'm considering buying an Early '08 MacBook (2.4 GHz Core 2 Duo) w/ an apparently bad hard drive ("drive not recognized"). Obviously I want to test before I buy. In order to determine if the HD is the only issue w/ this MB, can I take the hard drive from my functioning MB (1st gen. Core Duo 2.0 GHz, 160 GHz HD, OS X 10.5.7) and simply install it in the non-working MB to see if it starts up? I have a spare 160 GB Fujitsu HD pulled from a 2nd gen. MB Core 2 Duo, but it's wiped clean. Advice?

    AZherps:
    It should work. If the drive is erased, you won't be able to boot from it, of course. But you could test it by booting from the install disk for the computer and formatting the drive in the "new" computer and see how it works.
    cornelius

  • Can I swap hard drive from my Macbook (10.5.8) into Macbook Pro (10.6)?

    I have a white Macbook from 2007 (model A1181, 2.2GHz Core 2 Duo, OSX 10.5.8 installed) which I upgraded with a 500GB hard drive. I now have Macbook Pro (model A1278, 2.53GHz, 10.6 fresh install from disc, 250GB hdd).
    I would like to swap the 500GB drive from the Macbook into the MBP so I can transfer over all my settings and apps. Will that upgrade work? If not, what's the best method to perform this upgrade so I can restore my system on the MBP? I use TimeMachine and SuperDuper to backup my Macbook if that matters. Thank for any input!

    No, once you put the older MacBook drive in, if it even fits, you can't transfer to the new one because it's not physically in the MacBookPro anymore.
    And the MacBookPro may not be able to read a 10.5 boot disk if it shipped with 10.6.
    They are not backwards compatible when trying to boot from an older machines drive that probably doesn't have the correct drivers to run on a MacPro.
    First,
    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk in case you have some directory corruption.
    Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job. Better, run DiskWarrior if you have it.
    After that Repair Permissions.
    No need to report Permissions errors....we all get them.
    Then use Target Disk Mode and Migration Assistant to move settings and data.
    Make sure all your apps. are 10.6 compatible. I would trash any plug ins also.
    I followed this routine and had no troubles.
    DALE

  • Random, Sudden Shutdowns - A redux and other things to rule out first

    Do a google search for "macbook random shutdown" and you'll find many people with similar problems reporting on various forums. At present, this issue has not been picked up by the mainstream PC news media. However, one should also note that only a fraction of those with problems are suffering this particular fault. A large number of other reasons must be ruled out before a MacBook owner should become convinced their machine is one which suffers this problem. Bad RAM, poorly seated RAM, improperly installed hard drive, corrupted OS, corrupted plists, bad batteries, bad chargers, corrupted PMU, and corrupted NVRAM all need to be ruled out first!
    My own MacBook suffered the random sudden shutdown malady and eventually required complete replacement after a logic board replacement did not solve the issue. Some of the MacBooks appear to have a hardware problem which surfaces after a period of use. Many reported their problems starting after a month of ownership. Coincidentally, that also coincided with the release of 10.4.7, but most likely that is not at the root of the sudden, random, shutdown problem.
    (However, 10.4.7 is strongly implicated in a separate MacBook problem - colored vertical lines during boot on some machines. That is probably a separate issue.)
    Description of the Random, Sudden Shutdown Problem
    MacBook suddenly shuts off to a completely powered down state seemingly at random. There are no kernel panic, mouse freezing, or other premonitory symptoms. The machine simply powers down suddenly. The screen goes black. The hard drive spins down and no sleep light illuminates. The machine simply turns itself off.
    The shutdowns may occur on either battery or with AC adapter attached. Some owners report their MacBook is less prone to sudden shut down while on battery vs AC adapter. My own afflicted MacBook would suddenly shutdown on a fully charged battery or on either of two AC adapters.
    The shutdowns occur with either 10.4.6 or 10.4.7 OS loaded. I went through several cycles of clean installs of the base 10.4.6 and the Intel Combo update to 10.4.7 before it became clear that it mattered not which OS was running. Another indicator that this is not an OS issue is that sudden shutdowns can occur in target mode and also when running just the Apple Hardware Test - which relies on minimal software to operate.
    The shutdowns tend to grow more frequent once they begin. They may worsen to the point that a machine will not complete boot up before shutting down. It may take several power up presses to start the machine. Oddly enough, a machine that had difficulty starting up, may be easy to start up several minutes later. It may run for hours or minutes before another sudden shutdown. The frequency is low and random enough that is very difficult to demonstrate this fault to a service technician.
    Some users are able to induce a sudden shutdown by running their CPU's at high load and thus heating up the machine. This is easily done by running the yes command in two Terminal windows. Some users report their MacBook is more prone to sudden shutdowns when their CPU is relatively cool. The bipolar reporting is confusing. There may be more than one type of sudden shutdown being reported. One due to CPU overheating and another due to another hardware problem which has yet to be elucidated.
    Resetting of the PMU and PRAM MAY temporarily reduce the frequency of the sudden shutdowns, but the effect is temporary. Indeed, the effect may not even be real given the randomness of the shutdowns. None-the-less, one must perform PMU and PRAM resets to ensure that some corruption of those devices is not creating a reason for shutdowns. On my own MacBook, resetting PMU and PRAM (four chimes) did not prevent the random sudden shutdowns.
    The sudden shutdowns occur with well seated stock RAM, replacement RAM, and reseated/replaced hard drives. Swapping out and testing both RAM and hard drive helps to eliminate those as the source of the problem. On my own machine, I exchanged the RAM and the hard drive to eliminate them as the cause. This made it considerably easier for the Apple genius to decide it was an internal problem.
    In my case, a logic board replacement did indeed solve the fault, but several days later, sudden shutdowns began again. Presumably either the replacement board has the same weakness as the original or some other component of the machine was the actual reason for the sudden shutdowns. The former is quite likely because the machine was made stable for several days with a new logic board. At that point, I requested to be swapped to a new machine and the Apple Store manager wisely decided to help out his customer. For that I am most grateful. However, it is unlikely that the majority of people will have their machines swapped out, but instead repaired.
    At this time, no official statement regarding cause for or acknowledgment of the MacBook's sudden random shutdown problem has been made. Because the underlying cause has not been revealed, it is impossible to know that a logic board replacement will permanently solve the problem or merely result in the same fault recurring later on the replacement board. Of course, we do not know if it actually is a logic board flaw.
    My advice to MacBook owners whose machines develop the sudden random shutdown symptoms are to...
    1. Get your data backed up immediately. The machine will likely suffer more and more frequent shutdown events.
    2. Revert to stock RAM and hard drive if you have installed after-market replacements. You must do this and see if the shutdowns continue to occur. Otherwise, the first thing blamed will be your RAM and hard drive.
    3a. Perform a PMU reset, by shutting down the MacBook. Removing the battery. Disconnect the AC Adapter. Then, press the power button for five seconds. The reinstall the battery and mains adapter. Restart the machine.
    3b. Reset PRAM by holding option-command-P-R keys down during startup until you hear the chime at least three or four times.
    Resetting the PMU and PRAM are standard procedures you'll otherwise be asked to perform to diagnose your machine.
    4. Do a CLEAN install of the OSX if you wish to totally eliminate a bad OS install as the problem. This will destroy all your data. Alternatively, an archive and install will be helpful without totally destroying your data, but that will not let you exonerate your system files and settings. An alternative is to run Apple's hardware test utility which is found on your OS installation disc. However, an extended hardware test is needed because the shutdown flaw may take hours to surface.
    Note: If your MacBook has become so "narcoleptic" that it cannot even complete a boot up sequence, try holding the power button down until you hear a loud beep. That may allow an otherwise balky machine to start.
    Once you have done the above, and are still seeing random sudden shutdowns, you have largely done the preliminary footwork that you'll need to prove whether your MacBook has this particular problem and not something more common. Then, call AppleCare or visit your Apple Genius to have the machine repaired or replaced. Hopefully, the root cause of this problem will be discovered, disclosed, repaired and prevented. For now, it appears only a fraction of the MacBooks are suffering this fault, but the machine population is still young. Overall, the MacBook is perhaps the finest laptop I've bought from Apple. It will be nice to trust the machine to not lose my work.
    BTW - resetting PMU may induce a separate 10.4.7 related bug which results in your MacBook exhibiting a white screen with progressively more numerous vertical color lines during startup. This appears to be fixable by resetting PRAM and then temporarily changing display resolution to something other than the current setting and then back.

    thanks for the comprehensive info. i experienced this for the first time today. i bought my macbook the day they were released. the shutdown happenned for me after leaving my computer on overnight with no programs running. about two minutes into web browsing it shutdown. it then shutdown in the middle of restarts. i disattached power cord, external hard drive, dvd burner & ethernet & it powered up and has been working for about 20 minutes since.
    this computer has really been a lemon. first my superdrive scratches the **** (just previewed this, i can't believe they sensor the h_ word?) out of discs, then the trackpad button becomes very hard to push. i've been working around those issues using an external dvd burner and mouse, but not sure how to work around sudden shutdowns. i haven't been able to send it in for repairs yet since i bought it cause i needed it's dvd authoring capabilities for a class i was taking, plus i wanted to make sure nothing else went wrong (self fulfilling prophecy?). i was planning on taking it on vacation with me, but guess i better pack my old ibook too (which other than a cd burner which sucked from the start, has been very reliable). i'll send in my macbook when i get back.
    anyway, thanks for the info & advice! i'll back up my crucial data now.
    white macbook, 2GHz, 1GB ram (factory installed) Mac OS X (10.4.7)
    macbook Mac OS X (10.4.6)
    macbook   Mac OS X (10.4.6)  

  • Samsung hard drive problems with mid 2009 Macbook Pro

    Arghh, this is driving me mad. 
    I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
    1. Swap out the stock drive for the Samsung
    2. Boot from a USB drive which contains a mirror of my system
    3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
    4. Reboot
    5. System is very slow. Boots from USB but can't use keyboard to login
    6. Switch off and try again
    7. Remove Samsung drive
    8. Reboot from USB (works perfectly)
    9. Downgrade firmware to 1.6
    10. Replace samsung drive and try again
    11. System boots from USB
    12. Verify that drive is running at 1.5Ghz
    13. Disk utility and system profiler both crash
    14. Disk unmounts by itself and other random weirdness
    15. Remove Samsung drive
    I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
    a. Is there anythign I can do to get this drive to play nicely?
    b. What drive should I get if the answer to a is no?
    As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
    Any advice appreciated.
    Cheers
    //A

    I'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
    I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
    I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
    I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
    How does a cable fail? Could this be my problem?
    Cheers
    //A

  • Swapping Hard Drive problem

    Hello, I have a 2008 model Macbook pro.  I recently pulled the hard drive from a windows pc and replaced that drive with a SSD.  The windows drive was not reformatted, I figured I could do it through Disk Utility.  However, the drive does not show up.  I'm assuming it's currently formatted as ntfs or fat32. 
    The existing drive is bootable, but the machine is put back together and it's a pain to take apart.  Wondering if I can boot into something like terminal and choose to reformat the drive. 
    The only drive that shows up is my bootable flash drive.  I do have the ability to hook up the old drive through a USB to SATA adapter, and possibly boot that way.  If I can get it to boot from that external drive, is there a way to format the newly installed drive without having to rip the whole thing a part?
    I had a hard time with the * shaped screws getting them in and out, so I'm trying to avoid having to remove the drive again....
    Any tips would be appreciated!

    More info:  I think there is something wrong on the motherboard side all of a sudden.  Now when I put the original drive in it doesn't boot up anymore.  I wonder if while removing the old drive, I damaged the Hard Drive Connector?  I just ordered a replacement on ebay (only 9 bucks).  What is odd is I'm pretty careful about removing things, since I have replaced many laptop components over the years, so I don't think I did anything damaging when swapping hard drives.
    The laptop did work fine, but since it is a 5400 RPM drive, I wanted speed, so I wanted to just put a 7200 RPM or SSD.  What I ended up doing this morning was to hook up the SSD externally and choose to install Mavericks to that drive through my bootable USB.  Than, once I booted successfully, I re-took the laptop apart, and put the SSD drive into the laptop.  I didn't put the rail screws on this, I was just testing if it booted, so I just set it in the area it will reside.  I booted and it wouldn't boot up at all, never saw Apple logo, just showed a blinking folder with quesiton mark on the screen. 
    If anyone has any other suggestions, I'd appreciate it, but now the internal drive connections don't seem to work, but I can boot externally for now.  I figured I'd order the Hard Drive connector kit from ebay and see if that fixed it, since that is a 9 dollar part....
    Thanks.

  • How to swap hard drives?

    I currently have a mid-2007 white Macbook with Tiger OS. I'm thinking of purchasing a 13" Macbook Pro, but would like to swap hard drives since my current one is 320gb 7200rpm.
    What's the best way to do this? Can I just swap the drives out, and then reformat them with the installation discs? I don't mind reformatting the hard drives because I have all of my data backed up to an external already.

    Yes, you can swap, reinstall the OS from the DVDs that come with the new MBP, then use Migration Assistant to transfer the data form your external backup.

  • Hard Drive for a MID 2011 MACBOOK AIR 11 INCH

    Do you have a recommendation for online purchase of a new Hard Drive for a MID 2011 MACBOOK AIR 11 INCH??
    Thanks

    Here is another vendor that sells MBA storage upgrades:
    http://www.transcendusa.com/apple/jetdrive/
    Ciao.

  • Hard Drive Crashes (multiple on same Macbook)

    Hi!
    Ok so in July the first hard drive on my son's Macbook crashed. And not just a simple crash. It just clicked and sputtered, and was completely dead. Did not show up in DiskUtility when I booted from the CD, nor could I read it using anything I cold find after putting it in an external enclosure.
    It was the 60GB Seagate that came with it.
    Now this afternoon, the exact same thing has happened again with a replacement 160GB Seagate drive. A physical failure again.
    Now, I could see that maybe Seagate had a bad lot, but it seems highly unlikely that I would get 2 bad drives. My daughters Macbook has had no problems at all, and they were bought the same day.
    So before I replace it (again) with a Hitachi, I need to know if anyone thinks there could be something the Macbook is doing to cause these failures? It seems really bizarre that this has happened twice.
    Thanks!
    Chris
    Message was edited by: Clayton Chris

    The seagate hard drives in early macbooks have a known fault so that should explain your first failure. The drives pretty much self destruct due to a manufacturing error. Just do a search for macbook seagate drive failure or the like and you will find a more detailed explanation.
    Your second drive failure could be down to handling of the machine maybe. I know you are technically supposed to put the macbook to sleep before moving it to avoid damaging the hard drive or like others have said it could just be bad luck. If you changed the hard drive yourself it may well be under warranty.

  • HT1635 How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

    How do I know which Hard Drive to get for my MacBook 2006? The old Hard Drive is a Toshiba (MK8034GSX) S/N Z6APT2XUT 9H5 EC. A?

    I've put a 250gb 7200rpm drive in an Early 2006 with no problems.
    For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
    Or OWC  http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
    To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
    Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/HDE-SATA-Hard-Drive-Enclosure/dp/B001AAVA08/ref=pd_bxgy_pc _text_b
    If you don’t have the tools to open up the MacBook OWC has a set for $5
    http://eshop.macsales.com/item/OWC/TOOLKITMHD/

  • Swapping hard drives between PXI-8115 and PXI-8105 won't boot up

    I have a test system running Windows XP on PXI-8105.  I've upgraded the entire test system for another project and need to upgrade my existing systems; the upgrade runs on Windows 7 and PXI-8115.  I have new hard drives with Windows 7 and the new test software which were loaded/configured/tested on a PXI-8115, but I need to retrofit the PXI-8105 with them.  This doesn't work.  Windows begins to boot but fails and tries over and over again.  In an effort to take the PXI-8105 off-line to troubleshoot, I replaced it with one of the PXI-8115 and the old (WinXP) drive.  This didn't boot up, either.
    Here's a summary of my situation:
    An old system has PXI-8105 running WinXP
    A new system has PXI -8115 running Win7
    A hard drive (with Win7) from the PXI-8115 won't boot on the PXI-8105
    A hard drive (with WinXP) from the PXI-8105 won't boot on the PXI-8115
    What is different between the two PXI controllers that keeps me from swapping hard drives?
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
    Solved!
    Go to Solution.

    A couple thoughts:
    1. Windows 7 probably works fine on a PXI-8105. Although NI never officially supported or shipped that configuration, I suspect that the default Windows 7 installation contains enough of the driver support needed to boot up.
    2. In general, Windows is not very tolerant of swapping hard drives between completely different systems, especially with Windows XP and prior. Consider whether just installing fresh and copying over what you need is faster than trying to do this, but if you must, I would suspect that Windows 7 would be more tolerant of the swap.
    3. As a debugging step, try pressing 'F8' during the boot process to launch the Windows boot menu and try safe mode or some of the other options.  More information here.
    4. If all else fails, Google is your friend here as there's nothing particularly specific about this being an NI product that you need to know when attempting this operation. Any information you find online about swapping hard drives between PCs should be relevant to your situation. Searching for 'swap hard drive to new computer windows 7' gave some useful hits on the first page. Beyond that, you can also look into using the 'sysprep' utility to try and clean the system and prepare for swapping to a new PC.

  • External Hard drive is randomly popping on and off

    Hi. You guys are awesome by the way. We need to set up a tip system, where I can paypal something into an account for you... coffee cards or something, maybe itunes songs!
    One of my external hard drives is randomly disconnecting and then reconnecting to the computer. It is a 1TB Lacie connected over FW800 thru a daisy chain. It is a video edit suite with LOTS of attachments - three FW drives, a FW deck, two monitors, my ipod, and so on...
    Any thoughts? Need more info?
    Thanks.
    Nick

    Does it happen when off the daisy chain and hooked directly to the FW 800 port? If you don't know, then try that.

  • Setting up an external hard drive to back up my MacBook Pro?

    I am currently using a 320GB Western Digital external hard drive to back up my MacBook Pro using Time Machine, soon however I am going to be putting Windows 7 onto my machine so I am trying to figure out how I am going to back up the Mac OS X and the Windows partition at the same time using this hard drive. I am thinking about completetly erasing the drive and putting 2 partitions on it in 2 different formats (one for Mac OS X and one for Windows). I am also thinking of using Carbon Copy Cloner instead of Time Machine because it creates bootable backups. However, now that I am thinking about using Carbon Copy Cloner I am wondering if FAT32 will work for both partitions? (I have been using Mac OS X extended (journaled) only because it works with Time machine). I need help though because I would not know how to go about completely erasing/resetting the drive etc.. then partitioning it and formatting it. I am also wondering if there is a windows equivalent of CCC or Super Duper to back up the Windows partition. Thanks for your help in advance.

    I'm inferring from the way you wrote about using Windows that you plan on using it through Boot Camp.  Have you considered using VMware Fusion (or Parallels) instead?  Then Time Machine would back up the virtual machine along with everything else.  You also have the advantage that you can use both Mac OS and Windows at the same time - you don't have to choose one or the other.  There are two disadvantages.  First, since both Mac OS and Windows are running simultaneously, you need more memory.  I'd recommend no less than 8 GB if you run any serious software on either OS.  You can get away with 4 GB, but at times the system will be really slow.  Second, the virtual machine images are BIG - mine typically run over 20 GB - so you'll probably want a bigger backup drive if you go this way.

  • How big (GB) of a hard drive can my late 2009 MacBook handle?

    I'm looking to upgrade my internal hard drive in my late 2009 MacBook and I want to know what is the highest GB that can be supported?

    I have a late 2009 MacBook White with 4GB Ram and running on Lion.
    I just installed a 750 GB Seagate Momentus XT with 8 GB SSD hybrid drive. It was no trouble and works fast and perfect!
    Just make a new partition on the new disk, clone your current HD to the new disk (I used Carbon Copy Clone) and then replace. Simple as that!
    It just makes a bit more noise and battery life is shortened because of the specs of the Seagate HD.
    I hope this was helpfull.

  • I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

    To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
    Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
    Ciao.

Maybe you are looking for