Swapping out optical drive for SSD

Early 2011, 15" Macbook Pro with Mavericks 9.1
So basically, I want to replace my optical drive with an SSD. Seen a few discussions on it, know basically how it works, am aware of the warranty voiding issue, and also aware of how people at apple who made my computer are 12034725801x smarter than me and I shouldn't do it. I'm gonna do it anyway.
What are the best brands for the superdrive slot to hold the second drive, and should I leave the HDD in the primary slot or move it to the secondary?
The first one is the main question. I've read that only the primary can boot, and if that's true, then it would have to be the SSD for sure. Confirmation would be nice.

Get the OWC DataDoubler bracket for your model. The SSD should replace the HDD. The HDD goes where the optical drive is located. What you need to do:
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive.  Place the old drive in an external USB enclosure.  You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive.  Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
  1. Open Disk Utility in your Utilities folder.
  2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area.  If it does not say "Verified" then the drive
      is failing or has failed and will need replacing.  Otherwise, click on the
      Partition tab in the DU main window.
  3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID  then click on the OK button. Click on the Partition button and
      wait until the process has completed.
  4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
  5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
  6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
  1. Open Disk Utility from the Utilities folder.
  2. Select the destination volume from the left side list.
  3. Click on the Restore tab in the DU main window.
  4. Check the box labeled Erase destination.
  5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
  6. Select the source volume from the left side list and drag it to the
      Source entry field.
  7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume.  Click on the Restart button.  You should boot from the new drive.  Eject the external drive and disconnect it from the computer.
If you wish to use your Home folder on the HDD instead of on the SSD:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Similar Messages

  • Thinkpad Edge S430 - Swapping out optical drive for HDD?

    Hi There
    I just ordered myself an S430 with a 128gb SSD HDD included. I didn't see an option to replace the optical drive with a secondary HDD (e.g. a 500gb) so have the optical drive in as standard. Now, I would have rather changed this out for a secondary HDD or for a Blu-Ray drive, thinking I could do this myself once bought...Looking at other posts it looks like you can swap out the optical drive for a Blu-Ray drive, although I would preferably get a secondary drive over the Blu-Ray, but I'm hesitant over a few things:
    Is this possible to do myself (swapping out for either secondary HDD or blu-ray drive) without voiding the warranty? (I got it with 2 year warranty)
    Is it actually possible to do at all? (swapping out for a secondary HDD)
    Thanks
    Solved!
    Go to Solution.

    Unfortunately, I have found no hard drives that are compatible for your optical bay.  I do believe the reason you can change out your optical drive is to change to a blue-ray or CD, or DVD, maybe a player or burner. But like I said, I have found no hard drive that can fit in your optical drive.  You may be able to find what I could not but I have been looking all over the web. 
    I know how you feel, my computer at home can not have any hard drives in the optical bay as well.
    Best regards,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • Swapping OPtical Drive for SSD

    I am going to swap my optical drive for an SSD to make everything far more faster. My computer is out of warranty so it won't be affected. I was just wondering what will happen to my existing hard drive when I clone the old hard drive and copy it on to the SSD? Obviously I will make it so my computer boots       my SSD, does my old hard drive act in the same way an external hard drive does? Will I be able to save things on there just as easily as before?
    Thanks

    Go talk to Bmer over here
    http://macosg.com/
    What he did was move the hard drive to the optical bay and then replaced the boot drive with a SSD with a kit, he can walk you though it all as he's good with SSD's and all it's headaches. The kit also makes the Superdrive a external optical drive.
    SSD's make good boot and program drives, but not a good file drive, use the hard drive for that instead.
    One of the drawbacks is you can't boot from the OS X install disks or Windows disk or even perhaps not even Linux disks on a external optical drive.
    So you'll have to learn all about Carbon Copy Cloner and option bootable clones too.
    Download the free MacTracker and find out your SATA, as that can limit your SSD speed and could save you money as you buy the slower older SATA SSD's to match your hardware instead of the higher more expensive ones you can't use anyway.
    Good Luck.

  • Swapping optical drive for SSD - How to set it up?

    I'm going to purchase a Crucial M4 128GB SSD for my Late 2011 13" i7 Macbook Pro. I don't use my optical drive at all, so I figure I may as well swap that out for my current 750GB HDD, and put the SSD in the main harddrive bay. I know full well how to physically install the respective drives, but my confusion comes when cloning the current HD onto the SSD, then moving all your media files (music, movies, documents etc) over to the HD, while keeping your system files and applications on the SSD.
    So what I really need, is a PROPER in depth guide from the start of the setup process (First boot after installation of physical drives) detailing how to copy my system files and applications over to the SSD so I can boot from it, while keeping my data & media files on the HD and being able to access them all as I normally would through finder.
    Any and all responses are appreciated - I need all the advice i can get!

    If you use a cloning software program it will move, actually copy, everything from your original drive to the SSD.
    No need to anything after that to get the SSD to boot and have all your programs and data.

  • Swapping out hard drive fro SSD - does this invalidate the warranty?

    I'd like to install a Seagate Momentus XT 500GB SSD Hybrid Internal Hard Drive http://bit.ly/SSDHybrid in a MacBook Pro I'm buying.
    Will I be invalidating the warranty...?

    Hi
    I phoned Apple Care to ask the same question as I changed the stock RAM sticks and hard drive a month ago.
    I even phoned up twice and spoke to two different staff to make sure I get the same answer.
    Basic as the previous post stated, the warranty remains the same apart from the new parts you replace. However, Apple Care people told me if something went wrong when you are installing the new parts, then your warranty is not valid.
    The process itself is pretty easy, I believe there are instructions on how to do it in the manual. There are also lots of videos on YouTube as well. You can also get Apple approved repair center to do the change if you prefer.
    P.S. I kept the original RAM sticks and hard drive incase something goes wrong. Then I can simply put them back in the macbook to see if its the additional parts which are coursing the problem or the rest of the stock system. This will help me greatly when it comes to claim warranty repair.

  • Best HDD for replacing optical drive? (+SSD)

    Hello!
    Ill be buying a regular macbook pro and replacing the optical drive for an HDD.
    Now, I know that when you have only one drive, you should go for a 7200 rpm one. But in my case, since the OS wil be stored in the SSD, should I go with a 5400 rpm or 7200 rpm HDD?
    Obviously Ill be storing data there, but even though, wouldnt I benefit in any way from going with a faster drive?
    Ive also heard that 7200 rpm generates more heat, but would that happen if it's not the main drive?
    What do you guys think?

    So I'm going to resurrect this thread because of an issue I am having with my current setup that is exactly like what the OP was lookign to use:
    I currently have a HGST Travelstar 7K1000 2.5-Inch 1TB 7200 RPM SATA III HDD in the HDD bay of my late 2011 15-inch Macbook Pro, and a Crucial M4 128GB SSD in the Optical drive bay inside an Optibay. Since upgrading to this setup, my machine has been extremely glitchy, and I have had pinwheels popping up like crazy.
    My previous setup however still had the same SSD, but the SSD was in the HDD bay, and I had the stock 500GB 5400 RPM drive in the optical bay. That worked just fine, with no glitches or anything. When I tried just putting the larger HDD drive where the previous one was (in the optical bay) it would not even get recognized by my Mac. It would show up in Disk Utility, but not initialize, not erase, not partition, or anything. But once I swapped the SSD and new HDD, it recognized just fine.
    SSD is the System Drive, HDD is the storage drive.
    Any thoughts? Thanks!

  • What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

    What is the best and reasonably priced external cd/dvd optical drive for an Imac 21.5 inches from late 2009?

    A lot of people have a Mac where the superdrive has been taken out to be replaced with a harddisk. Try to find a friend who has done that, give him a beer and take the superdrive, then buy a superdrive container from OWC or another for  afew dollars and put it in there. This slimdrive container has a USB connector. There you go.

  • What is the best 3rd party optical drive for my mac?

    What is the best 3rd party optical drive for my mac?

    I really like this drive, it reads/writes DVD's and CD's just fine on my mac and on my PC aswell also it has only 1 USB so it will only take up one of your 4 USB's
    Amazon UK link
    Amazon US link

  • Is there a swap out ac plug for australia?

    is there a swap out ac plug for australia?

    There's the IdleTimeout parameter in the reports server's conf file. I believe that is defaulted at 15 minutes though, not 5 minutes.

  • Question - What is the best external optical drive for an imac W8******5PE ?

    Question - What is the best external optical drive for an imac W8****5PE ?
    <Edited by Host>

    Try http://eshop.macsales.com/shop/firewire/optical-drives/
    Allan

  • Optical Drive for MBP Retina Display

    I am trying to find an external optical drive for my new MBP with Retina Display late-2013. I would prefer a Blu-Ray dual-layer slim burner due to its acceptance of large storage media (for backup purposes). I am using Toast 10 Pro as a burning software. It would be a bonus if I could also play DVDs or Blu-rays from it (using XBMC or VLC media players). What would you recommend? Thank you.

    http://eshop.macsales.com/shop/superdrive/MacBook_Pro_15

  • Very simple step-by-step guide for Optical Drive to SSD swap?

    When my MacBook Pro comes out of warranty I'd like to remove the optical drive and put in an SSD, to hold my apps and OS.  I have a 13" MBP, early 2011, with a 500GB SATA HDD (5400 RPM). 
    I'm generally handy with tech stuff, but having looked into this, am a bit uncertain on the best way forward, so am hoping to get advice from more experienced types on this forum.  Issues and questions so far are...
    1) Stage 1 - determining specs and approach
    The first issue for me is to determine...
    - Whether it's better to house the SSD in the HDD bay and move the latter into the optical drive bay, or whether I should leave the HDD where it is and put the SSD in the optical bay.  Given my MBP model, which is best?
    - What SSD is best?  I’m currently looking at this, which includes a data transfer kit.  Crucial's M4s seem to be pretty good for this sort of thing:
    http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=B9BCBF75A5CA7304
    - What cables, adapters, bays, software etc are appropriate for my model?  I’m based in Australia and will likely order much of the kit from abroad, so if I miss anything, it’s likely to be a (frustrating!) wait. 
    - I’m also keen to put a case around the formerly-internal optical drive so need to figure out cables and cases for that.
    2) Stage 2 - Doing the swap
    Seems that the best thing is to find a super-simple how-to video. 
    As there are quite a few out there, any opinions on ones that are great (and ones that are to be avoided!) would be welcome.
    3) Advice for use once installed.
    Assuming I’ve gone through the process correctly, I'll put my OS and apps on the SSD.  Then...
    - Can I simply delete the OS residing on the HDD?  Understandably I want to avoid any bad-or-irreversible-without-great-pain mojo.
    - Ditto for apps.  Is there anything required to ensure any settings and preferences don’t get lost?

    Okay - I'm getting closer to doing this.
    I'm leaning toward getting this bay for the HDD and this enclosure for the optical drive, to make it an external.  Fortunately it's available from an Aussie retailer. For me it's a little hard to figure out from the description whether this only works to shift the HDD to the optical drive bay and whether that means I'd need a separate bay/adapter to mount the SSD in the boot drive location, so any advice would be wonderful.
    This is the SSD I'm looking to get: 256GB Crucial m4 2.5" SSD with Data Transfer Kit.
    And I'd get CCC.  Is there anything else I'd need (cables, bays)?
    And a last question: I have a number of apps that are registered/authorised to my current machine - Kindle, iTunes and Final Draft.  Do I need to de-authorise them, before loading them on my SSD, or will the applications see them as still being part of the current machine?
    Thanks again for any help!
    GG

  • Swap optical drive with SSD for 4k video editing?

    I've already swapped the original HD with an SSD 500gb and replaced the optical drive with the original HD as a secondary drive. That has worked nicely for a couple years. But now that I'm doing intense 4k video editing, I want to replace the HD in the optical bay with a 1tb SSD.
    My question to you: Will the SSD perform at the same speed in the optical bay as it would in the main bay as a secondary drive? Or is there a speed limitation on the optical bay periphery and as such it's not worth putting a fast drive in there?
    What alternative options would you suggest for video editing? My late 2011 Macbook Pro 2.5ghz core i7 with 16gb ram stalls when editing 4k footage off a firewire g-raid. I figured an internal SSD would perform faster and as a double benefit make my files portable without need for an external drive.

    I've already swapped the original HD with an SSD 500gb and replaced the optical drive with the original HD as a secondary drive. That has worked nicely for a couple years. But now that I'm doing intense 4k video editing, I want to replace the HD in the optical bay with a 1tb SSD.
    My question to you: Will the SSD perform at the same speed in the optical bay as it would in the main bay as a secondary drive? Or is there a speed limitation on the optical bay periphery and as such it's not worth putting a fast drive in there?
    What alternative options would you suggest for video editing? My late 2011 Macbook Pro 2.5ghz core i7 with 16gb ram stalls when editing 4k footage off a firewire g-raid. I figured an internal SSD would perform faster and as a double benefit make my files portable without need for an external drive.

  • Replacement optical drive for late 2009 Mini

    I recently purchased a used late 2009 Mac Mini that works great except the optical drive does not read any CD's/ DVD's I have fed into it. I hooked up an external USB drive which reads hem fine, but is not bootable, in case I ever need to reinstall my OS.
    Can anyone provide a model # of a reasonability priced internal slot load CD/ DVD reader- writer that is also Mac bootable?

    There should be a compatible replacement superdrive-like optical drive
    among those listed for Apple Mac Mini from OWC macsales site online.
    They also appear to have several other upgrade & replacement parts...
    An instruction video (free) can be seen on the bottom of their pages
    on how to install optical and hard drives. Or use online iFixit guides.
    About USB flash or externalHDD, be sure the HDD or SSD is formatted
    to use with GUID and HFS+ Journaled; there may be other details that
    need to be readfor these to work. External USB optical drives can be
    used with bootable system discs, be sure to check retail seller returns
    policy when you get some brand such as LG or other, so you may return
    the unit should it not work out for your purposes. Some won't boot OS X.
    Good luck & happy computing!

  • Replacing MacBook Pro 4,1's optical drive with SSD

    Has anyone swapped out their optical drive and added a SSD in its place? Or alternatively removed their optical drive, put the HDD in its place, and installed a SSD in the HDD's original location? On a pre-unibody MacBook Pro 4,1. I've read many posts of people doing so with the unibody models, but am curious to hear the results of anyone who has done it with this older model.
    Thanks!

    I have just recently purchased an "OPTIBAY" from here:http://store.mcetech.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=OBSXGB- MB15&Category_Code=STORHDOPTIBAY
    And I bought this SSD:http://www.newegg.com/Product/Product.aspx?Item=N82E16820721107 (which was $65 on sale the other day) to hold the OS and apps. Hope this helps.

Maybe you are looking for

  • Are there any Beta users who didn't need to create a new library in 1.0?

    I know that I had to. A whole lot of flakiness disappeared when I did. I did the usual thing of exporting the Beta 4.1 XMP metadata and then re-importing all my files to a brand new native 1.0 library. Since then, I've had _no_ sorting problems and n

  • How can I use the entire screen width while using fluid grids?

    Starting to  play around with fluid grids in CS6. If you start with the fluid grid template, in the desktop layout (for example), the gridContainer is 88.5% wide. It appears you should do everything within the gridContainer div. With that being said,

  • HTML / Word Editor in SAP HR

    Hi Experts Can anyone please advise how can HTML / Word editor be configured in SO10. The only option right now is standard text editor and even after changing editor, it doesn't help. Please advise. thank you Regards Neha

  • Images in album resize??

    Maybe one of you guys can help me. I will try to explain. I have imported an album of photos to iweb, when I look at the album page I have windows that show each album I have imported. The problem I have is that in those windows the images are not in

  • Migrating from Weblogic Portal 4.0 to 8.1

    Hi folks, do you know of any handy migration guide for old Portal 4.0. I have found myself migration guides from 4.0 to 7, and from 7 to 8.1, but i need a more direct migration from 4.0 to 8.1 . My company needs to estimate migration efforts/costs fo