Swapping storage drive between 13 and 15 inch retina macboks? (both late 2013 models)

Hey all, i have two macbook pro retinas, one 13" 1TB late 2013 and one 15" 500GB late 2013.
Question is can i swap the hard drives out between each other? purely on a hardware level here.
Would they be compatible with with the logic board seeing as they are both same models only different sized display?
I have a time machine backup of both drives and would plan on restoring each once swapped over.
Thanks in advance all!

You might check if something is available at OWC, but if not there is nothing that can be done. Those models do not use standard HDDs or SSDs.
You're always welcome to take it to the Apple Store and ask if they would be able to upgrade the smaller one, but typically Apple does not permit that.

Similar Messages

  • Swapping hard drives between PXI-8115 and PXI-8105 won't boot up

    I have a test system running Windows XP on PXI-8105.  I've upgraded the entire test system for another project and need to upgrade my existing systems; the upgrade runs on Windows 7 and PXI-8115.  I have new hard drives with Windows 7 and the new test software which were loaded/configured/tested on a PXI-8115, but I need to retrofit the PXI-8105 with them.  This doesn't work.  Windows begins to boot but fails and tries over and over again.  In an effort to take the PXI-8105 off-line to troubleshoot, I replaced it with one of the PXI-8115 and the old (WinXP) drive.  This didn't boot up, either.
    Here's a summary of my situation:
    An old system has PXI-8105 running WinXP
    A new system has PXI -8115 running Win7
    A hard drive (with Win7) from the PXI-8115 won't boot on the PXI-8105
    A hard drive (with WinXP) from the PXI-8105 won't boot on the PXI-8115
    What is different between the two PXI controllers that keeps me from swapping hard drives?
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
    Solved!
    Go to Solution.

    A couple thoughts:
    1. Windows 7 probably works fine on a PXI-8105. Although NI never officially supported or shipped that configuration, I suspect that the default Windows 7 installation contains enough of the driver support needed to boot up.
    2. In general, Windows is not very tolerant of swapping hard drives between completely different systems, especially with Windows XP and prior. Consider whether just installing fresh and copying over what you need is faster than trying to do this, but if you must, I would suspect that Windows 7 would be more tolerant of the swap.
    3. As a debugging step, try pressing 'F8' during the boot process to launch the Windows boot menu and try safe mode or some of the other options.  More information here.
    4. If all else fails, Google is your friend here as there's nothing particularly specific about this being an NI product that you need to know when attempting this operation. Any information you find online about swapping hard drives between PCs should be relevant to your situation. Searching for 'swap hard drive to new computer windows 7' gave some useful hits on the first page. Beyond that, you can also look into using the 'sysprep' utility to try and clean the system and prepare for swapping to a new PC.

  • Internal drive for Macbook Pro 13 inch with Retina display from late 2013?

    Hi everyone. After some water spillage to my new computer, the guys at the Apple Store have told me that my internal hard drive needs to be replaced. No other damage was done, thankfully. I have a Macbook Pro 13 inch with Retina Display from late 2013. The Apple genius said my current hard drive has flash storage, and that my new hard drive will need that as well as the computer requires it. Does anyone know where I can buy such a hard drive? Is it possible to buy it from Apple? I am happy to buy online or in a store (I live in Australia). Also, is this Mac Pro model difficult to take apart? I'd like to install the hard drive myself.
    Thanks in advance to anyone who can help!

    From the specs:
    STORAGE AND MEDIA
    Storage
    256, 512 GB, or 1 TB flash storage
    Media
    Optional Apple USB SuperDrive

  • My macbook 15 inch wont turn on, it makes the hard drive sound and then a few seconds later it sounds like its powering down with like a clicking noise

    my macbook 15 inch wont turn on, it makes the hard drive sound and then a few seconds later it sounds like its powering down with like a clicking noise

    Try Resetting your Mac's PRAM and NVRAM
    If that doesn't help, try Resetting the System Management Controller (SMC)
    If neither helped, boot from your install disc, run Disk Utillity. The startup disk may need repairing.
    Using Disk Utility to verify or repair disks
    Check the S.M.A.R.T. status at the bottom of the Disk Utility window.
    Make sure it says: Verified

  • I recently bought the macbook pro retina display early 2013? should I return it and get the late 2013 model?

    i recently bought the macbook pro 15 inch retina display early 2013? should I return it and get the late 2013 model?

    You have 14 days exchange
    New retina has which yours doesn't -
    802ac wifi, very very fast
    Haswell cool running processor
    Longer batt life
    Lightweight form factor
    Faster  PCIe SSD
    Overall a better machine to have yes
    Your choice is subjective to your needs however
    peace

  • Only one of my fans are working on my macbook pro retina 13 inch late 2013 model. Is something wrong?

    It appears that only one of my fans are working on my macbook pro with retina display 13 inch late 2013 model. Is some thing wrong? if so how can i fix it?

    To my knowledge there is only one fan on all 13" Mac notebooks, Retina or standard screen. Not enough space for a second fan and no Discrete GPU to cool.
    So nothing is wrong.

  • Fan like noise - Macbook Pro Retina 13 inch - late 2013 model

    If I open Frontline Commando (game app) my brandnew Mackbook pro make fan like noise. (annoying and scary) Could anyone advice please?
    my sys configuration:
    Model - Macbook Pro Retina 13 inch - late 2013 model
    RAM - 8 GB
    Processor - 2.4 GHz intel core i5
    OS - OS X 10.9.1

    Normal during gaming use, fan noise.
    A: you notice it more in a quiet room (the typical case) which is normal, all is AOK
    B: fuzz and dust has caked onto the blades causing the fan hub to get off balance and make a buzzing sound.
    C: fan rotor is going bad and making a whirring or buzz noise (rare).
    D: Fan is spinning up due to excess heat from gaming, heavy graphics gaming (typical, all is OK)
    A and D are normal
    B and C are not.

  • How can I tell the MacBook Pro with 13-in retina that I purchase is the late 2013 model from the box?

    I'm wondering how I can tell the differences between the late 2013 model and the early 2013 model of MacBook Pro with 13-inch retina from the box?

    You can enter the serial number in the appropriate field on a web site such as this and it will tell you what model it is:
    http://www.chipmunk.nl/klantenservice/applemodel.html
    Ciao.

  • Fonts pixelated on 15" MBP Retina (late 2013 model)

    I recently purchases a 15" MacBook Pro Retina (late 2013 model).  I've notice that the font in some programs look pixelated.  Is this a known issue?  Under System Preferences, I've already attempted to change the resolution from "Best for display" to "Scaled."  Any suggestions to ensure that I see the best on screen (since I paid extra for the Retina feature!)
    Thanks!

    Howdy jimkol,
    The video resolutions supported by your MacBook Pro are described here -
    MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications
    Specifically -
    Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, both at millions of colors
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Sound stops working while using headphones on Retina Macbook Pro (late 2013)

    I have a brand new Retina Macbook Pro (late 2013) with OSX 10.9.1 installed. The sound continuously stops working when I'm using my headphones (which I use on a daily basis). I've noticed that when I unplug the headphones, the sound from the internal speakers and the headphone port stops working.
    I've already checked other answers and have tried their suggestions:
    I've looked at the sound settings and it is not set to mute.
    I've tried unplugging the headphones several times in a row and that still doesn't work.
    I don't see a red light in the headphone port.
    I've checked the headphones and there is nothing wrong with them (I use them with other devices).
    I've tried using different headphones, but the problem persists.
    The only way to get the sound working again is by restarting my laptop which is very inconvenient. I use this laptop for working and having to restart it every time I unplug my headphones is just not a solution. I honestly have no idea what is going on. This is a very new laptop (and my first Macbook); I've had it for less than 3 months. The laptop stays on my desk and has not been dropped or damaged in any way. This is a very expensive laptop and the last thing I would expect is for there to be a problem like this.
    If anyone has a solution to get rid of this problem once and for all, please let me know!
    Thank you.

    I have a brand new Retina Macbook Pro (late 2013)
    Please read the warranty paperwork that came w/your computer.  You have 14 days to return the computer w/no questions asked.  You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.  Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.  If you DIY and mess up, your warranty will be VOIDED! 

  • Glitch at shutdown? Macbook pro retina display late 2013 model

    Hi,
    I have the late 2013 model of the macbook pro retina display. Since the past few weeks, I've been noticing a glitch at shutdown. This started to happen after my macbook asked me for my keychain password. How can I fix this glitch?
    Before the whole keychain password: My mac would take a good 30 seconds to turn off properly. There would be a grey screen for a good 30 minutes.
    After the whole keychain password: My mac just shuts off in a second literally but the grey screen doesnt appear. These a glitch. You can see the dock trying to go down at shutdown but because of the glitch it just stays there.
    How can I fix this? Should I get it checked out?

    Please make a Genius Appointment and take it in for service. Ask for the glitch specialist.

  • Retina Macbook Pro (late 2013) screen blinking

    I recently got a Retina Macbook Pro (late 2013), and the screen has been spontaneously blinking. It's exceptionally distracting, and I've been unable to correlate it to any running program. Has anyone else had this issue?

    Welcome to Apple Support Communities
    Your MacBook is in warranty, so take it to an Apple Store or reseller to get the MacBook repaired or replaced free of charge. It looks like a hardware issue, so it's better to do this

  • Hello. On my Macbook air late 2013 model I am having a problem where microsoft word for mac just stops working for soon reason and at the screen where the document should be is just gray and does not even display the document. Does anybody have a fix?

    Hello. On my MacBook Air late 2013 model I am having a problem with Microsoft office word for Mac where the window for the document becomes all gray and I can not see anything that I have typed or any menus for it and also windows will sometimes dissapear and I am having truble getting them back. If anyone has anyideas of what is going on or could even help me thank you.

    Glad that helped.
    As time goes by (months or years), keep your eyes on how long Microsoft continues to support Office 2011 for Mac.  Eventually you should consider Office 365 or Apple's Pages, Numbers, and Keynote.

  • How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

    how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

    Check with your telephone carrier or Android:
    https://www.android.com/filetransfer/
    Ciao.

  • Can I swap hard drives between 2007 and 2011 iMacs?

    I have a 2007 iMac that I want to replace with a refurbished 2011 model. I had upgraded my 2007 iMac with a 1.5T hard drive and the 2011 model only comes with a 1T hard drive. And you can't do any upgrade at the Apple store on refurb units. SoI am just wanting to swap hard drives. The 2007 has 10.7 and it appears that the 2011 model has the same. (says elegible for 10.8 upgrade on Apple Store site.) I have replaced the hard drive myself, so I am familiar with the process.
    Thanks.

    The drives themselves are compatible, yes. However, the OS might not be. In any case, if you have a Time Machine backup (or some other backup) of the older iMac, it's best to wipe the drive and reinstall the OS once installed in the new Mac. Then you can just transfer your data, apps, and settings from the backup.
    One important thing to note, though: the 2011 iMacs have temperature sensors built in on the hard drive, so if you use a drive other than one supplied by Apple specifically for that system, the fans will run at full speed all the time. Probably the easiest workaround: use something like smcFanControl to regulate the speed of the fans. Hope this helps!

Maybe you are looking for

  • Query not using index after delete?

    In 10 million table, i have purge a 5 millions and done table re-org, rebuilt of index and gather stats 100% including indexes. Query which is doing index scans eariler, now after purge explain plan has changed and its performing full table scan. Any

  • Function module RZL_WRITE_FILE_LOCAL is missing?

    Hi, To avoid using OPEN DATASET command, to read and write into Application server I usually use function modules RZL_WRITE_FILE_LOCAL to write to, and RZL_READ_FILE to read from app servre, but unfortunately I could not find RZL_WRITE_FILE_LOCAL in

  • Organise import error in Web Dynpro Java .

    Hello Experts, Once you done with the application based on RFC and maintained some code in wdDoInit() it wil give some error , where you have to do some step to debug that error . step : 1)  Click on the Error line and right click for options 2) Sele

  • UCCX 9.0.2 set agent to "Ready" after initial login

    I am trying to get agents to go "Ready" automatically after login. I tried to do a workflow macro in "Agent Managment Workflow" - Start-Up but it doesn't seem to work. [DELAY] 17000 [APPLICATION:AGENT_DESKTOP=NOT READY - CISCO AGENT DESKTOP] [CONTROL

  • Error at the time of MIRO

    Dear All,   Error at the time of MIRO  while doing invoice for customs and the error showing as Tax code VO country IN does not exist in procedure ZAXINN                VO i maintained for Non Taxable transactions and Imports PO wont have any tax pro