Swc problem with flex from my custom fla

I have an fla which has several library items with a class linkage to a GenericButton.as file. I am exporting this fla as an swc file, and linking that swc into flex.
My problem is that when flex builds the code for GenericButton it gets undefined property for anything it tries to reference that is part of the library item.
Example:
GenericButton.as does libLabel.text = "something"; where libLabel is a textfield, instantiated in the library clip which is bound to GenericButton in it's class linkage.
The field exists in the clip, but when I compile in Flex with the swc in there, it cant find it. It says libLabel doesnt exist, undefined property.
What am I missing here? I want to allow the fla author to bind some of his items to low-level component classes like that, and it's his job to ensure that all the necessary items are part of it. So if he makes a new button, he must just ensure he has a libLabel textfield somewhere in the clip.
Why cant flex see that the items it's trying to compile have a libLabel in there? Is there a work around?

Thx for the reply Greg, but no, that's not the problem. If you re-read my post you'll probably see my problem is a little more involved than that.
I have symbols exported for actionscript and I can instantiate them in Flex, that's not a problem. The problem is symbols that are exported for actionscript and bound to a base class that contains custom code. That custom code, when it uses it to type-check in flex builder (during the swc link stage), causes undefined properties.
For some reason Flex is not seeing that the exported library item has the things the .as file is looking for.
Does that make sense?
I could probalby put together a simple example project but I'd have to find somewhere to upload it so that others could see.
This problem is hard to describe, you have to read what I'm saying very carefully.

Similar Messages

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

Windows 8.1 Problem with games from windows store.

I've got a problem with games from windows store. The installation is going well without any problems, however when I try to open it it's loading and then it turns off. The same problem happens when I try to use Games for Windows. I've use a sfc scan and
it shows some errors but unfortunately it cannot fix them. Should I share the CBS log or find the solution somewhere else? I hope you help, best regards.

Hi,
According to my experience, the problem like store game app open failed probably caused by hardware driver. such as Audio and Graphic driver. So, first of all, please try to reinstall these two driver to fix this problem for test.
In addition, for SFC scan failed problem, it can be caused by many reasons, I would suggest you use another command to fix your system for test.
Dism /Online /Cleanup-Image /ScanHealth
Also you can test SFC command in Windows 8.1 safe mode.
Thirdly, if problem persists, please check Event Viewer, generally speaking, it would record the app open failed events.
Roger Lu
TechNet Community Support

Hey Guys, problem with Flex Time.

Hey Guys,
i have a problem with Flex Time. I was searching for a way to copy my 1-Tackt Timplin Beat to make 12 out of it, but there were always "wholes" between the new inserted regions. So i found Flex Time, but then when i choosed a Region, pressed the Flex Time button, nothing happend, except that the Header became a little bit bigger, as if there would been added a few more options, but there came only more free space .
Would be great if somebody could help me!:)

I would suggest Option dragging the bottom right edge of the Region so it fits precicely to the grid, then copy. This is a quick way to time stretch...

I have problem with buying from iTunes Store

I have problem with buying from iTunes ??!!
I've put all of my info cards
What can i do ?!

Are you trying to spam the forum with 6 the same posts?
Please give more details of your problem and answer the question below:
Is the app available in your country?
Are you using the App Store for your country?

Hi. I have a problem with downloading from app store while last three days. An error did mot allow me to that. It's number is 1009.

I have a problem with downloading from app store while last three days. An error does not allow me to take any app. The error number is 1009.

Thats the ugliest code I've seen in a while and may be hampering your abilities to debug it. No offense - you have to start somewhere - think of it as somewhat constructive criticism.
However, I cannot find any place where this is happening. Its happening on line 193.
Also, this only happens when you try to move certain pieces to certain squaresThat might be a clue. Try printing out the indexes before line 193 and see what happens. Maybe use a debugger to step through your code.

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

K8t Neo2 problem with resume from standby after BIOS flash

Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail. Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby. The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way. Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%. The only way to get it back down to normal again seems to be to reboot. By Contrast Hibernation works fine, with no increase in cpu load after resume. I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers. Any ideas what is going on?

Noticed last night that S! standby seems to work OK. Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem). The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem. However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present. This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it. Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

Problems with color from Photoshop to InDesign CS2?

Hi all,
Couple of questions:
When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
thanks for all your help,
Alex

>When I select "Proof Colors" from "View", the color changes a little bit. Is this normal?
It's not abnormal, but it will depend on what color spaces the objects are in and the color space that you choose to proof.
>Also, on "View", "Proof Setup", which one should I select "Document CMYK" or "Working CMYK" or some other "Custom"
You have a lot of choices for how to set up color management. I usually leave my settings set up for my most common situation, US Sheetfed coated and Adobe RGB, but if I have a special job I can reassign the document color space (notice I said Assign, not convert, in order to preserve the native object color numbers). You can proof the color in either the Working CMYK (the one in the color settings) the Document CMYK (if that's different) or something else entirely if you are repurposing an existing document for a new output method.
When you proof colors, InDesign calculates the conversions on the fly and displays the results. RGB objects will almost always show some shifting due to gamut differences, but the type and degree will depend on the rendering intent you specify. CMYK objects tend not to show as much shifting because the gamuts are likely to be closer, but again it will depend on the exact profiles and intents. Objects that are already in the chosen proofing space should not show any shift at all.
There is a caveat here regarding working in one space and outputting in another: If you want the colors to be as close as possible you will be converting to the new profile, which will by necessity change some color numbers to match the appearance. This is not usually a problem with things like photographs, but other things, like type, which is created as 100% K can be converted to a four-color mix which is not good. If you know the output conditions, I always recommend setting the document CMYK to that space when you start.
Peter

Problem with output from report to excel, calling the report from form 10g

Hi everyone, I'm having a problem generating a excel from a report, which is called from a form, I'm using Forms 10g. The problem is this: My report has a variable number of columns. These columns appear according to data obtained from the database, these columns are dates, In vesion 6 excel file generated shows the columns one after another starting in column A1 to column CP. I mean that the dates are correlative. But in version 10g the excel file generated shows the same report starting in column A to column T, only shows the 20 dates correlative corresponding to this columns, the rest of the dates are down the excel sheet in groups of 20 dates, it's something, the file in 6i grows across and in 10g grows down the excel sheet. The report (rdf file) is the same in 6i and 10g, I compiled the 6i version to obtain the 10g version. The excel sheet generated in 10g looks like the report was in pdf format, because PDF format, cuts the report in pages and the file grows down, if I generate the report in PDF format it has the same structure excel file in 10g has. I hope yo can help because I have days trying to solve this but I have no succes. If someone could help I could email the excel files generated in two versions. Here I put the code I use to generate the files in 6i and 10g. I have tried with DESFORMAT=SPREADSHEET in 10g but the result is the same. Thanks for your help. Greetings for all.
Code for version 6i (Works Very well)
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
     BEGIN
nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
          BEGIN
          nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
     BEGIN
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
ELSE
          BEGIN
                    nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');
END;
Code for version 10g
PROCEDURE GUARDAREXCEL IS
pl_id ParamList;
nom_rep varchar2(20);
cla_rep varchar2(20);
cod_dis varchar2(4);
nom_arch varchar2(100);
fec date;
--byt12122007.sn
repid REPORT_OBJECT;
     vURL VARCHAR2(500);
     rep_status VARCHAR2(20);
     vJobID VARCHAR2(100);
     v_rep VARCHAR2(100);
VAR NUMBER;
w_name_repserv VARCHAR2(30);
--byt1212007.en
BEGIN
     --w_name_repserv:=F_OBTIENE_SERVREP;
w_name_repserv:='repserv';
pl_id := Get_Parameter_List('mytmp_params');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('mytmp_params');
IF :BK_PARAMETROS.LI_COD_DIS IS NOT NULL THEN
     cod_dis := :BK_PARAMETROS.LI_COD_DIS;
END IF;
IF :BK_PARAMETROS.TI_COD_CLI IS NOT NULL THEN
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,:BK_PARAMETROS.TI_COD_CLI||'%');
ELSE
Add_Parameter(pl_id,'P_COD_CLI',TEXT_PARAMETER,'%');
:BK_PARAMETROS.TI_COD_CLI:='%';
END IF;
IF :BK_PARAMETROS.CLAS_REP=1 THEN
cla_rep := '001';
ELSE
     IF :BK_PARAMETROS.CLAS_REP=2 THEN
          cla_rep := '002';
     ELSE
          IF :BK_PARAMETROS.CLAS_REP=3 THEN
          cla_rep := '003';
     ELSE
          cla_rep := '004';
     END IF;
     END IF;
END IF;
Add_Parameter(pl_id,'P_COD_DIS',TEXT_PARAMETER, cod_dis);
Add_Parameter(pl_id,'P_FECHA',TEXT_PARAMETER,to_char(:BK_PARAMETROS.FECFIN, 'DD/MM/YYYY'));
Add_Parameter(pl_id,'P_CLASE',TEXT_PARAMETER, cla_rep);
Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
/*Add_Parameter(pl_id,'DESTYPE',TEXT_PARAMETER,'File');
Add_Parameter(pl_id,'MODE',TEXT_PARAMETER,'Character');
Add_Parameter(pl_id,'DESFORMAT',TEXT_PARAMETER,'DELIMITED' );*/
select sysdate into fec from dual;
IF :BK_PARAMETROS.TIPO_REP=1 THEN
BEGIN
     repid := find_report_object('tdvenrli1577');
--nom_rep := 'tdvenrli1577.rep';
nom_arch := 'c:\windows\temp\RepCobranzaPlanos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1577');
END;
ELSIF :BK_PARAMETROS.TIPO_REP=2 THEN
BEGIN
     repid := find_report_object('tdvenrli1578');
          --nom_rep := 'tdvenrli1578.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaLargos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1578');
          END;
ELSIF :BK_PARAMETROS.TIPO_REP=3 THEN
BEGIN
     repid := find_report_object('tdvenrli1576');
                    Add_Parameter(pl_id,'P_XLS',TEXT_PARAMETER, '1');
          --nom_rep := 'tdvenrli1576.rep';
          nom_arch := 'c:\windows\temp\RepCobranzaDetallados' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1576');
          END;
ELSE
BEGIN
     repid := find_report_object('tdvenrli1545');
                    --nom_rep := 'TDVENRLI1545.REP';
          nom_arch := 'c:\windows\temp\RepCobranzaTodos' || TO_CHAR(fec, 'ddmmyyyy') || '.xls';
          SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'tdvenrli1545');
          END;
END IF;
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER,nom_arch );
--Add_Parameter(pl_id,'DESNAME',TEXT_PARAMETER, nom_arch);
standard.commit;
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESNAME,nom_arch);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, 'File');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'DELIMITED');
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, w_name_repserv);
     SET_REPORT_OBJECT_PROPERTY(repid, REPORT_OTHER, 'paramform=no');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status IN ('RUNNING','OPENING_REPORT','ENQUEUED')     LOOP
          rep_status:= report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          vJobID := SUBSTR(v_rep, INSTR(v_rep, '_', -1)+1);
          vURL:='/reports/rwservlet/getjobid'||vJobID||'?'||'server='||w_name_repserv;
     END IF;
     WEB.SHOW_DOCUMENT(vURL, '_blank');
     IF NOT form_success THEN
          MESSAGE('Error: PL/SQL held against Button failed to execute');
          RAISE FORM_TRIGGER_FAILURE;
     END IF;
/*Run_Product(REPORTS, nom_rep, SYNCHRONOUS, runtime, FILESYSTEM, pl_id,'');
EXCEPTION WHEN Run_Product_Failure THEN
message('Error');*/
END;

There are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor

Problem with playback from mac to pc?

I recently Created a peroject on a mac containing a large quantity of markers and clips, when I transfered it to my home pc I recieved a notice saying that I needed a third party program for the video to play properly. When I did play the video, its frame-rate was terrible and couldn't keep up with the audio at all. Is this just a problem with the video transfered bit rate or with the actual changing of mac to pc? please help...
transfering has worked before between the two computers and the t3i I use works also with each computer, I wonder if any effects could create this?

I've never seen that message. What exactly did it say? You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

Problem with printing from Acrobat Reader XI

SInce I installed Acrobat Reader XI I have got problems with printing out pages. The text starts a bit down (2 cm) on the paper, resulting that the last part of the text on the page will be missing. And the missing part does not follow on page 2, it just don´t comes out!
It doesn´t matter what settings i click in on the print setting page in Acrobat Reader, it always gets the same result.
Does anyone know what can be the problem?

No files appeared in C:\Users\Pavilion\AppData\Roaming\Adobe\Adobe PDF\Settings but they did appear in Distiller.
I tried to copied them from C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Settings, but found they were already there. I copied them by adding -COPY before .joboptions in the name. Now they appeared in Printing Preferences with the -COPY added.
I tested a print from Word (using File / Print), but was not prompted for the filename or location. I checked my entire system and couldn't find the PDF file anywhere. I tried changing the Port to Desktop\*.pdf using Printer Properties, but that didn't work either.
I was able to successfully use the Acrobat menu item in Word & Excel to create a PDF but it automatically created the file on the Desktop without an option to change the filename.
After several days and hours, I gave up and installed Acrobat X on the W7 computer. I can still use Acrobat XI on the W8 computer. So be it!
Thanks anyway for your attempts to help.

Illustrator CS6 - Organisation problems with printing from PDF

Hi everybody
I working with the Illustroartor for some times now and I get better every time, but now its appears that’s I have a organization problem with my Illustrator CS6 and maybe somebody can help me here.
My problem: I create for example a logo and this logo I like to print on an Objekt like a Paperclip or a Lighter. I have now a print template as a PDF File (see attachement) with serveral predefined print areas. Around 100 predefined printing areas are on the PDF File and the only way to add my logo into this 100 predefined printing areas is by using the funktion “copy/past” but this takes long time and I have to adjust each single logo into the predefined printing area by hand … so this way don’t make really sense and is also very time consuming.
My question is: Is there any way to automate this process by using e.g. the artboard funktion or some other functions?
I would appreacte any help in this case!!!
Thank you very much in advance.
Nice regards
Klaus

Hi Alex,
There is newer version of Data Modeler (3.0 EA2) and it is free
You can download it from here
http://www.oracle.com/technetwork/developer-tools/datamodeler/ea2-downloads-185792.html
Regards
Edited by: Dimitar Slavov on Dec 9, 2010 2:15 AM

Problem with stream from radio

Sorry for my english, I wanted to posted on my local forum but it have problem with server and doesn`t work
So on windows all channel this radio work good but on arch the main channel can`t running
I suppose it`s depend of my iptables setting, I did all setting by this how to http://wiki.archlinux.org/index.php/Sim … wall_HOWTO
from part " Setting up a single machine"
This is adress radio channel with I have problem http://87.118.100.10:7000, in audacious I have only info "prebuffering" and nothing else
vic can run this channel but stream is very dashed. It`s very strange because on windows all work good
I tryed cut iptables in rc.conf in sector daemon and reboot but it was similar
I sent this adress to my friend who use too arch and he had got the same problem
Do you have idea why i have this problem
Second time I`m sorry for my english but please help me
Last edited by yellowfox (2007-02-16 12:21:01)

Your english is much better than my american, so maybe we can communicate somehow.
I don't use iptables since I have a router handling that for me.
Trying http://87.118.100.10:7000/ with xmms, vlc, amarok and mplayer resulted in not much. VLC did give very choppy playback, while xmms got in a buffering/prebuffering loop.
Using amarok or mplayer to open http://87.118.100.10:7000/listen.pls resulted in good music. Wish I could understand the lyrics but I could listen to it.
Opening http://87.118.100.10:7000 in firefox leads to a Shoutcast Admin control panel where the link Listen results in a playlist file.
It also tells me that they are stream aac sound, so, maybe the right plugin or a recompile after installing faad will make your chosen program work.
Good luck and have fun

Abobe v8: Problems with converting from word 2003 to PDF

I use one of those free conversion tools, since i am a student. My problem is that i have a word document with a unique page margin. When i convert from word 2003 to pdf everything gets converted except the page margin which is much bigger then it's supposed to be. Do anyone know how i can fix that?, any help are appriciated.
Kindly Erik

You cannot fix anything in Reader. If you have a problem with the tool
used to create your pdf, please ask in their forum.
Mike

Swc problem with flex from my custom fla

Similar Messages

Maybe you are looking for