SWEHR3 0007 INS but event triggers at any operation on Infotype

Helo,
    I'm calling an event on the INS operation of infotype 0007 - Planned working time.
    The whole entry is in configuration is
       Object type: P
       Infotype: 0007
       Subtype : Blank
       Update Op. INS
       Activity : Blank
       Object Type : BUS1065
       Event : HIRED
    This configuration is done in SWEHR3 and workflow is getting triggered.
    The problem is that even when delimiting infotype, It triggers the event and workflow, which should not happen.
    Is that any solution to this...?
   Naimish.

Hi Naimish,
It might help to use table V_T779X_1 for PA instead of T779X which is run through transaction SWEHR3.
Regards,
Priya.

Similar Messages

When launching Illustrator on Mac OSX 10.9 I get an erro that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue fo

When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign

You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

HT5958 I have just updated to FCPX 10.1 but my new libraries do not contain any of my previous events or projects - any body know the answer?

I have just updated to FCPX 10.1 but my new libraries do not contain any of my previous events or projects - any body know the answer?

Did you select the "update old events and projects" option?
Are the originals on external hard drives that aren't connected at the moment?
Exactly how did you upgrade to 10.1?

Trying to download adobe program 'adobe p;hotshot CS5 Optional Automate Plug-ins' but get a message "does not contain valid signature" Any ideas to get around that please.

Trying to download adobe program adobe photoshop CS5 Optional Automate Plug-ins, but get a message that it does not contain valid signature and it won't install the app. Can someone help with this please? Trying to reach Adobe by phone is impossible.
ev

First, have you installed all the updates for photoshop cs5 by going to Help>Updates from within photoshop cs5?
The automated installer only installs the following plugins:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4965
The following plug-ins and associated files are available via an installer:
Automate Plug-Ins:
• Contact Sheet II
• Picture Package (ContactSheetII)
• Web Photo Gallery (WebContactSheetII) plus presets
• Script for Layer Comps to Web Photo Gallery
Other Optional Plug-Ins:
• TWAIN
Other plugins including the pattern maker plugin need to be installed manually using this download:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4964

Event Triggers not getting executed

I'm having following code in beforeData(PLSQL) event trigger:
ADCPackageName.MethodName
There is no such package in database, even my report works fine and publish data without any error.
Is there any configuration for enabling event triggers.
I didn't sufficient documents on event triggers. I want to use them for returning some values to report variables and validating input parameters.

Hi,
I tried to use "SAP_WAPI_CREATE_EVENT" also but it is also behaving in the same manner.
At first execution event is getting triggered but my workitem is not getting terminated.
But when i am executing the same report second time, again my event is getting triggered, and this time my workitem got terminated, and workflow proceeded furthur.
I checked it from SWEL, i have two entries for my event (i.e; first and second execution of report).
Any idea why it is behaving like this.
Please find below code for reference, apart from below code i have only declarations.
call function 'SWC_ELEMENT_SET'
EXPORTING
    element       = 'ActualState'
    field         = 'A'
TABLES
    container     = it_cont
EXCEPTIONS
    type_conflict = 1
    others        = 2.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
    OBJTYPE                       = 'WORKINGWI'
    OBJKEY                        = '000000003061'
    EVENT                         = 'Approve'
IMPORTING
   EVENT_ID                      = it_event_id
RECEIVER_COUNT                =
TABLES
   EVENT_CONTAINER               = it_cont
EXCEPTIONS
   OBJTYPE_NOT_FOUND             = 1
   OTHERS                        = 2
COMMIT WORK.
Regards,
Amar

Strange ZEN logout event triggering

Strange ZEN logout event triggering
Hi!
ZCM 10.3.2, Windows XP/7, Novell Client installed, have a bundle associated to device and should be triggered at ZENworks logout. This all seems to work ok, in ordinary way. But, when user auth is ok with Novell Client (against eDir), but is not attached with DLU via ZEN and appear Windows Workstation login screen and user cancel this dialog and return to Novell Client login screen, then before mentioned bundle is triggered, in some unknown for me reason. Because there is no ZEN login, not speaking about logout. I have similar bundle set to trigger at user login ... it does not run same way. Also, don't see same behavior when bundle is set to run at user logout.
Any ideas?
Btw. this kind of cancelling login is seems to related to getting a'lot of Bundle.ItemCreationError's described in http://forums.novell.com/novell-prod...ionerrors.html.
More thanks, Alar.

Originally Posted by NovAlf
Strange ZEN logout event triggering
Hi!
ZCM 10.3.2, Windows XP/7, Novell Client installed, have a bundle associated to device and should be triggered at ZENworks logout. This all seems to work ok, in ordinary way. But, when user auth is ok with Novell Client (against eDir), but is not attached with DLU via ZEN and appear Windows Workstation login screen and user cancel this dialog and return to Novell Client login screen, then before mentioned bundle is triggered, in some unknown for me reason. Because there is no ZEN login, not speaking about logout. I have similar bundle set to trigger at user login ... it does not run same way. Also, don't see same behavior when bundle is set to run at user logout.
Any ideas?
Btw. this kind of cancelling login is seems to related to getting a'lot of Bundle.ItemCreationError's described in http://forums.novell.com/novell-prod...ionerrors.html.
More thanks, Alar.
Hi Alar,
Do you have any update on you problem because I have the same issue and I am wondering if you found any way to bypass it??
I found another thread but no solution:
http://forums.novell.com/novell/nove...ter-login.html
Thank you in advance for your answer,
OAKFND
PS: Zen version is 11.1

Data Change event triggering Process hangs in Process chain

HI Folks,
In a daily running Process chain we have a Data Change event triggering Process , to trigger broadcasting settings
This process is running for a long time , with no progress
in SM50 , there are 2 process
Process 1 : RSRD_BROADCAST_STARTER Status : OnHold Reason : SLEEP
Process 2 : SAPLRSRD_X_RUNTIME Status : OnHold Reason : RFC
I tried to change the Parallel Processing setting as Number of Processes = 1
But still the process is hanging.
Any inputs will be a great help.
Thanks
Sonal......
P.S : SAP_BW 700 0022 SAPKW70022 SAP NetWeaver BI 7.0 and EP 6.0
Edited by: Sonal Patel on Feb 2, 2010 1:47 PM

Hi sonal,
I would suggest you to uninstall all the components and start all new again, n please make sure you have the following order :-
1) install GUI 710 along with BEx 7.0 and 3.x complete.
2) install BW AddOn (bw350gui710_8-10004473.exe latest one from Service market Place).
3) Install BI AddOn (bi710sp11_1100-10004472.exe latest one from Service market Place).
4) Install SAP precalc server (xPreCalServer10_1-10004472.exe, latest one from Service market Place).
In service market place you can get the components from Downloads ->Support Packages and Patches -> Entry by Application Group -> "SAP Frontend Components"
Also, plz make sure that you restart your Server OS after each and every installation.
This would solve your problem.
Rgds,
Sreekul Nair

Customers should receive event triggered notification.

Hi,
I am suppose to do the e-mail design documentation using sap crm on 1. Customer Receives Event Triggered Notification. and 2. Customer receives the marketing information. on these two topics got no idea on these things at all. Could any one please help me in finding the material for these and also please describe the overview of these two things.
Thanks and Regards,
Venkat.
Message was edited by:
venkat ratnam

Hi,
I cant say about the documentation but what I know is we have to perform the Scott configuration in the system,Maintain the distriution list in custom table for email detials of the customer & develop an exit which will send the required information on event of saving the document..Hope this will help..
Thanks

Class or method needed to capture the event triggered

Hi All,
       Help needed in finding the event triggered in ALV container.
As per my requirement , I am registering the event mc_evt_modify for getting the search help(MEKK) in a ALV container . However it is triggered when ever I am inserting a row in ALV container and also the method data_changed is also triggered with that. But I don't want the method data_changed to be triggered.
Is there any method or class which captures the event triggered so that I can put a condition on mc_evt_modify event.
Please help me to resolve this issue.
Regards,
Srinivas

Hi,
You can check event ONF4
"1 . --------------------   first register it
DATA: it_f4 TYPE lvc_t_f4,
        wa_f4 TYPE lvc_s_f4.
wa_f4-fieldname = 'CONNID'.
wa_f4-register = 'X'.
wa_f4-CHNGEAFTER = 'X'.
APPEND wa_f4 TO it_f4.
CALL METHOD g_alv_grid_ref->register_f4_for_fields
    EXPORTING
      it_f4 = it_f4.
"2. --------------------------- now handle it
handle_on_f4 FOR EVENT onf4 OF cl_gui_alv_grid
                           IMPORTING e_fieldname e_fieldvalue er_event_data,
METHOD handle_on_f4.
    DATA: repid LIKE sy-repid,
          dynnr LIKE sy-dynnr,
          field TYPE help_info-dynprofld.
    repid = sy-repid.
    dynnr = sy-dynnr.
    field = e_fieldname.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
      EXPORTING
        tabname           = 'SFLIGHT'
        fieldname         = 'CONNID'
        searchhelp        = "give search help here
        dynpprog          = repid
        dynpnr              = dynnr
        dynprofield       = field. "return picked value to the one you are in
    "prevent furhter standard processing
    er_event_data->m_event_handled = 'X'.
ENDMETHOD.
Regards
Marcin

VMware Performance Event Triggers use case questions.

1) Can the CPO VMware Adapter Performance Event Triggers and their
SAMPLE SIZE, INTERVAL, and CONDITIONS attributes be configured
for the following use case?
2) Can VMWare Performance Event Triggers be CORRELATED? and if so would it be needed to satisfy the use case?
3) Would an additional performance monitoring tool be required to satisy the use case?:
If a VM CPU or RAM has been 80% for 2 hours then trigger a workflow
and
If a VM CPU or RAM has been at 60% for X days then trigger a workflow

I will first describe how you could instrument a correlation method, but ultimately, I'm not sure it is really necessary for the uses cases described.
To correlate VMware performance events over a designated timeframe, you would create a correlation process that tracks the underlying performance event and decides whether or not to trigger the process you want triggered when the correlated event is detected.
Here's how it works.
First, create a global table with three columns:
1) Virtual Machine path
2) Consecutive Trigger Count
3) Last Trigger time
Create a process that is triggered by a VMware performance event (such as Memory Avg > 80%) where you can set a sample size and interval that makes sense given the timeframe of interest (2 hours or X days). For example, a sample size of 10 and interval of 30 seconds (5 minutes) is a reasonable time slice from vCenter for a 2 hour timeframe. This results in requiring 24 consecutive triggers to raise the actual event of interest. (2 hours divided by 5 minutes)
That is, the formula is:
Sample Size * Interval / Timeframe = Consecutive Trigger Count
The correlation process triggered by the raw VMware event does the following:
1) If there is no existing entry in the global table for the VM, add entry to table with count = 1 and current time
2) if entry exists, check the current time against the last trigger time
   a) if it is the next interval, for example, current time is 12:15 and last triggered time was 12:10 (see note below),
        Increment counter and set last trigger time
        If count = 24, then run the process that handles the "VM Memory Avg > 80% for at least 2 hours " and delete entry from table.
       If count < 24, the process exits having only incremented the counter and set the last trigger time
   b) if the current time is > than last trigger time + time slice (+ a little padding), set the counter back to 1
Note: When comparing current time w/last time, you should pad to account for slight processing delays so compare current-time < last-time+(time slice*2). Anything less than 10 minutes in this case would be considered a consecutive trigger. You could also compare current-time < last-time+time-slice+1, which is probably also safe.
Now, having gone through all that, you may not need the correlation process after all. Simply adjust your sample size to be large enough to accommodate your ultimate timeframe and you can trigger your event handler directly without the need to correlate. So for the 2 hour window, just create a sample size of 240 (* 30 seconds = 2 hours). This may or may not work depending on how performance metrics have been configured on the server (sample size, intervals and how much is saved). You can only set your own sample and intervals to multiples of those configured values (so be careful and refer to the VMware documentation when relying on such metrics)
You may find that the correlation method I first described is more reliable, especially for longer timeframes such as X days (where you need to sample hourly rather than every 5 minutes).
In any case, I think you can do what is asked without external monitoring, but it will require some experimentation and a deeper knowledge of how performance metric sampling works for ESX.

How to disable the "turn page" event triggered by the scroll/swipe function?

The problem is as follows.
The default behaviour of Acrobat Reader (both stand alone and browser plug-in) is to allow scrolling/swiping with the mouse wheel/trackpad. This is useful when the pdf's page length is greater than the screen's own length, because you can read the pdf with no need to distract your attention from the text to the scrollbar button. However, the same scroll/swipe function turns into a usability problem when the pdf is embedded in a html page and the pdf's page length is smaller than the browser's length. In this case, the scroll/swipe turns the page, distracting your attention from the text to the unintended behaviour of the browser. What happens is that you are so used to scrolling/swiping that you did it unintentionally in the pdf's caption area. You really did not want to turn pages in the pdf. Furthermore, if the pdf takes the whole html page, being a website, the scroll/swipe function flips the website pages in ways that neither the reader nor the writer had ever intended. Hence the question. How to disable, in this case, the "turn page" event triggered by the scroll/swipe function? A JavaScript should do, but the SDK documents did not help so far...
Message was edited by: 41457173
Message was edited by: 41457173

... or release a patch for the API,
... or suggest an alternative route to achieve the intended result.

Created events in iCal that synced to iPhone, but events now gone on MBP?

I spent an hour the other night creating a semesters worth of events in my iCal on my 2011 MBP which are now on my iPhone, but have vanished from my computers calendar. I cant get the events back. Any help?

now that im looking at it... basically everything is gone except for holidays on both my iphone and macbook.

How to determine the source of Events triggered in a process chain

Hi ,
We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains. These events are raised via BP_EVENT_RAISE using the ABAP process type.
However, our problem is to identify the source of these event trigger - i.e. which process chain triggered this event ?
Looking at SM64, the event history does not display the source for these events.
Is there any table or program that we can use to determine the source of these events which are triggered.
Any help is much appreciated and points awarded.
thanks
BK

Hi,
do check in the program /SSA/BWT . or TCODE - ST13 -- enter BW-TOOLS and execute. -- Choose Process chains and execute --- Select the date and time for which you want to see the process chains and execute again.
This will give you the entire list of process chains triggered, status, timings(start, end, overall runtime). Once clicked on the process chains it will show you the steps in theprocess chains, data loaded in the data targets, source system, etc...
hope it helps.

Event triggered for checkbox in cl_gui_alv_grid

Hi All ,
I have a requirement like ,i give PO number on selection-screen.After execution, the items should be displayed on second screen ,which has some options on the top like before GR or after GR .(custom screen designed with cl_gui_alv_grid for display)
I desgined checkboxes for each row of the line item.user can click on multiple rows and click on EXECUTE button on the screen.After that smartform should trigger and print .
Now my query is how to capture the checkboxes which the user has entered (thru cl_gui_alv_grid) . Is there any event that gets triggered upon clicking the checkboxes?? I need the data of the corresponding row to process further .User can click on multiple items.
Please respond
Thanks

Hi Hemanth
You should have a field in your internal table matching the checkbox column in ALV.
Call method CHECK_CHANGED_DATA of CL_GUI_ALV_GRID on user command for execute button,
it will set the field = 'X' for ticked lines in your internal table.
Then use a loop on your internal table and find selected lines.
You don't need an event triggered when user clicks.
Edited by: Bulent Balci on Aug 3, 2010 4:42 PM

140MB of photos in "modified" folder, but didn't modify any of them?

I just recently upgraded to '09. I uploaded my first batch of photos the other day. It was a lot, about 1.4GB from a trip I took. I happened to be looking in the package contents for something else, but stumbled up the modified folder for the photos I had just uploaded. I had looked at them in iPhoto but had not adjusted any...not one. In fact, I don't typically edit in iPhoto, but rather in Photoshop. Anyway, the modified folder that coincides with the originals folder has 143MB worth of photos! Why? I didn't modify a single one? Projecting into the future, if this sort of behavior continues, I'll quickly start gobbling up HD space for what is, from what I can tell, no reason. Why on earth would I have 143MB's of modified photo when I hadn't modified a single one? Any clue how/why this would happen?

Yes. It's best, IMO, to upload from the camera to a folder on the Desktop where you can preview and losslessly rotate those photos needing it with the free applicationXee before importing the folder into iPhoto.
If you name the folder to identify the shoot the resulting Event in iPhoto will have the same name. This workflow will also give you the opportunity to sequentially batch rename the files to something more informative than IMG_XXX with an application likeName Mangler. I use the international date format and a brief description like this: 2009-09-06-Labor Day-001.jpg.

SWEHR3 0007 INS but event triggers at any operation on Infotype

Similar Messages

Maybe you are looking for