SWF bgcolor, width and height

me have start a ActionScript Project in Flex
how to set the output swf' width and height? and the bgColor?

Hi - this is an old question, but I'm having the same
question and don't see a response.
I have an actionscript only project, and want to control the
output parameters for the SWF. Is this possible?

Similar Messages

SWF loader need to load 100% width and height

Hi,
 I have using dashboard in my application.In which the flex pages are loaded using SWF loader. the swf is not loading 100% when i minimize the browser. actually its loading 100% when the browser is full screen mode. suppose the browser is opened in 75% the swf also gets loaded based on the browser size. but after maxmizing the browser the SWF its not expaned to the actuall size of the browser. could you anybody help me plz..?
Thanks & Regards
Muthu

Hi,
 I have used this code to load the swf in the main application:
<mx:Canvas id="dashCanvas" creationPolicy="all" cachePolicy="on" width="100%" backgroundColor="#FFFFFF" horizontalScrollPolicy="off" verticalScrollPolicy="off" >
 <mx:SWFLoader id="dashBoard" trustContent="true" width="100%" height="100%" scaleContent="true" autoLoad="true"
source="@Embed(source='../../../../assets/appl/dashboard/dashboard.swf')" />
</mx:Canvas>
And i have set width and height as 100% in <mx:Appilcation> .
Thanks and egards
Muthu

Fullscreen published in flash - htm 100% width and height file is too big

Hello everyone
I need some help to create a fullcreen flash animation inside
dreamweaver.
What I did was to create a html file published in flash 100%
width and height.
It worked well on my explorer browser, but the size of the
file is 995 k and this would be my index.
When I publish on my provider the file doesn't open, probably
is too big as an index, i don't know.
Is there anyone there that could help me on that one?
Thank you
This is the code on Dreamweaver html
<HTML>
<HEAD>
<meta http-equiv=Content-Type content="text/html;
charset=ISO-8859-1">
<TITLE>back_men</TITLE>
</HEAD>
<BODY bgcolor="#262626">


11cf-96B8-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
WIDTH="100%" HEIGHT="100%" id="back_men" ALIGN="">
<PARAM NAME=movie
VALUE="file:///C|/betoko_webfiles/flash_files/betoko/back_men.swf">
<PARAM NAME=quality VALUE=high> <PARAM NAME=bgcolor
VALUE=#262626> <EMBED
src="file:///C|/betoko_webfiles/flash_files/betoko/back_men.swf"
quality=high bgcolor=#262626 WIDTH="100%" HEIGHT="100%"
NAME="back_men" ALIGN=""
TYPE="application/x-shockwave-flash" PLUGINSPAGE="
http://www.macromedia.com/go/getflashplayer"></EMBED>
</OBJECT>
</BODY>
</HTML>
<script type="text/javascript"
src="fixit.js"></script>

Well, firstly you have > 60 minutes of video, therefore, you should not use the 60 minute preset. Since you have 80 minutes of video, you're probably better off using the 90 minute preset.
Secondly, the presets assume that you are compressing your audio to AC3 with A.pack or Compressor 2 (depending on which version of DVDSP you're using). Uncompressed audio takes up lots of disc space and bandwidth.
Thirdly, the difference between the measured size in the Finder and the size in DVDSP is the difference between true gigabytes (how the Finder measures things) and billions of bytes (how DVDSP measures things). When you Get Info in the Finder, look at the number following the file size in GB... it's a larger number that's so many billions of bytes. This larger number should agree with the number you see in DVDSP. See the DVD FAQ for a discussion of this issue.

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

Java returning incorrect values for width and height of a Tiff image

I have some TIFF images (sorry, I cannot post them b/c of there confidential nature) that are returning the incorrect values for the width and height. I am using Image.getWidth(null) and have tried the relevant methods from BufferedImage. When I open the same files in external viewers (Irfanview, MS Office Document Imaging) they look fine and report the "correct" dimensions. When I re-save the files, my code works fine. Obviously, there is something wrong with the files, but why would the Java code fail and not the external viewers? Is there some way I can detect file problems?
Here is the code, the relevant section is in the print() routine.
* ImagePrinter.java
* Created on Feb 27, 2008
* Created by tso1207
import java.awt.Graphics2D;
import java.awt.Image;
import java.awt.print.PageFormat;
import java.awt.print.PrinterException;
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.FileImageInputStream;
import javax.imageio.stream.ImageInputStream;
import com.shelter.io.FileTypeIdentifier;
public class ImagePrinter extends FilePrintable
 private final ImageReader _reader;
 private final int _pageCount;
 private final boolean _isTiff;
 //for speed we will hold current page info in memory
 private Image _image = null;
 private int _imgWidth = 0;
 private int _imgHeight = 0;
 private int _currentPage = -1;
 public ImagePrinter(File imageFile) throws IOException
 super(imageFile);
 ImageInputStream fis = new FileImageInputStream(getFile());
 Iterator readerIter = ImageIO.getImageReaders(fis);
 ImageReader reader = null;
 while (readerIter.hasNext())
 reader = (ImageReader) readerIter.next();
 reader.setInput(fis);
 _reader = reader;
 int pageCount = 1;
 String mimeType = FileTypeIdentifier.getMimeType(imageFile, true);
 if (mimeType.equalsIgnoreCase("image/tiff"))
 _isTiff = true;
 pageCount = reader.getNumImages(true);
 else
 _isTiff = false;
 _pageCount = pageCount;
 public int print(java.awt.Graphics g, java.awt.print.PageFormat pf, int pageIndex)
 throws java.awt.print.PrinterException
 int drawX = 0, drawY = 0;
 double scaleRatio = 1;
 if (getCurrentPage() != (pageIndex - getPageOffset()))
 try
 setCurrentPage(pageIndex - getPageOffset());
 setImage(_reader.read(getCurrentPage()));
 setImgWidth(getImage().getWidth(null));
 setImgHeight(getImage().getHeight(null));
 catch (IndexOutOfBoundsException e)
 return NO_SUCH_PAGE;
 catch (IOException e)
 throw new PrinterException(e.getLocalizedMessage());
 if (!_isTiff && getImgWidth() > getImgHeight())
 pf.setOrientation(PageFormat.LANDSCAPE);
 else
 pf.setOrientation(PageFormat.PORTRAIT);
 Graphics2D g2 = (Graphics2D) g;
 g2.translate(pf.getImageableX(), pf.getImageableY());
 g2.setClip(0, 0, (int) pf.getImageableWidth(), (int) pf.getImageableHeight());
 scaleRatio =
 (double) ((getImgWidth() > getImgHeight())
 ? (pf.getImageableWidth() / getImgWidth())
 : (pf.getImageableHeight() / getImgHeight()));
 //check the scale ratio to make sure that we will not write something off the page
 if ((getImgWidth() * scaleRatio) > pf.getImageableWidth())
 scaleRatio = (pf.getImageableWidth() / getImgWidth());
 else if ((getImgHeight() * scaleRatio) > pf.getImageableHeight())
 scaleRatio = (pf.getImageableHeight() / getImgHeight());
 int drawWidth = getImgWidth();
 int drawHeight = getImgHeight();
 //center image
 if (scaleRatio < 1)
 drawX = (int) ((pf.getImageableWidth() - (getImgWidth() * scaleRatio)) / 2);
 drawY = (int) ((pf.getImageableHeight() - (getImgHeight() * scaleRatio)) / 2);
 drawWidth = (int) (getImgWidth() * scaleRatio);
 drawHeight = (int) (getImgHeight() * scaleRatio);
 else
 drawX = (int) (pf.getImageableWidth() - getImgWidth()) / 2;
 drawY = (int) (pf.getImageableHeight() - getImgHeight()) / 2;
 g2.drawImage(getImage(), drawX, drawY, drawWidth, drawHeight, null);
 g2.dispose();
 return PAGE_EXISTS;
 * 
 * Created By: TSO1207 - John Loyd
 * @since version XXX
 * @return
 public int getPageCount()
 return _pageCount;
 public void destroy()
 setImage(null);
 try
 _reader.reset();
 _reader.dispose();
 catch (Exception e)
 System.gc();
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public Image getImage()
 return _image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgHeight()
 return _imgHeight;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getImgWidth()
 return _imgWidth;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param image
 public void setImage(Image image)
 _image = image;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgHeight(int i)
 _imgHeight = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setImgWidth(int i)
 _imgWidth = i;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @return
 public int getCurrentPage()
 return _currentPage;
 * 
 * Created By: TSO1207 - John Loyd
 * @since Mar 25, 2008
 * @param i
 public void setCurrentPage(int i)
 _currentPage = i;
}Edited by: jloyd01 on Jul 3, 2008 8:26 AM

Figured it out. The files have a different vertical and horizontal resolutions. In this case the horizontal resolution is 200 DPI and the vertical is 100 DPI. The imgage width and height values are based on those resolution values. I wrote a section of code to take care of the problem (at least for TIFF 6.0)
 private void setPageSize(int pageNum) throws IOException
 IIOMetadata imageMetadata = _reader.getImageMetadata(pageNum);
 //Get the IFD (Image File Directory) which is the root of all the tags
 //for this image. From here we can get all the tags in the image.
 TIFFDirectory ifd = TIFFDirectory.createFromMetadata(imageMetadata);
 double xPixles = ifd.getTIFFField(256).getAsDouble(0);
 double yPixles = ifd.getTIFFField(257).getAsDouble(0);
 double xRes = ifd.getTIFFField(282).getAsDouble(0);
 double yres = ifd.getTIFFField(283).getAsDouble(0);
 int resUnits = ifd.getTIFFField(296).getAsInt(0);
 double imageWidth = xPixles / xRes;
 double imageHeight = yPixles / yres;
 //if units are in CM convert ot inches
 if (resUnits == 3)
 imageWidth = imageWidth * 0.3937;
 imageHeight = imageHeight * 0.3937;
 //convert to pixles in 72 DPI
 imageWidth = imageWidth * 72;
 imageHeight = imageHeight * 72;
 setImgWidth((int) Math.round(imageWidth));
 setImgHeight((int) Math.round(imageHeight));
 setImgAspectRatio(imageWidth / imageHeight);
 }

What are the units of "Width" and "Height" of a Shape?

What are the units of "Width" and "Height" properties of a Shape when programming?
Something odd like points or twips or tweedles or nibbles?
http://www.ransen.com Cad and Graphics software

Width and Height are properties of type Single; they represent the dimensions of the shape in points, where 72 points = 1 inch.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Finding the width and height of an image

Hi...
i have a path to an image "images/me.gif" and i'm trying to find its width and height.. am trying to use javax.swing.ImageIcon but it refuses to recognise the constructor with just the filename (string) parameter, and needs a URL to the file... anyone knows what i'm doing wrong??? is this the wrong class that i'm using...!??!?!?!?!?

String filename = "images/me.gif";
Image myImage = carregarImagem(filename);
System.out.println(myImage.getWidth(this));
System.out.println(myImage.getHeight(this));
* M�todo que carrega imagens na mem�ria, a partir da URL onde o
* applet est� sendo carregado. O uso de um 'mediaTracker' � fundamental para
* evitar problemas quanto � velocidade de carga de uma imagem. Se voc� n�o
* usar um mediaTracker, o seu c�digo pode tentar usar uma imagem antes dela
* estar plenamente carregada na mem�ria, o que causaria um erro de execu��o.
* @param nomeDaImagem O nome da imagem a ser carregada
* @return A imagem requisitada ou null caso n�o haja tal imagem na url do applet
public Image carregarImagem(String nomeDaImagem)
               try
                               Image imagem = getImage(getDocumentBase(), nomeDaImagem);
                               MediaTracker carregador = new MediaTracker(this);
                               carregador.addImage(imagem, 0);
                               carregador.waitForID(0);
                               return imagem;
               catch(Exception erro)
                               erro.printStackTrace();
                               System.exit(0);
                               return null;

Current page (not Document) width and height with JSX

Hi,
I am trying to create a script that saves every page of the document and add its width and height to the name.
So far I managed to get the dimensions of the document using:
app.activeDocument.pages.documentPreferences.pageWidth;
app.activeDocument.pages.documentPreferences.pageHeight;
That's ok when all the pages in the document have the same dimensions (Document Preferences).
However, when I use custom pages that does not work.
I tried the code below but does not work either.
for(i=0; i<nb;i++)
 app.activeDocument.pages[i].documentPreferences.pageWidth;
 app.activeDocument.pages[i].documentPreferences.pageHeight;
I have done some research and I don't seem to find any information regarding custom pages dimensions.
Can you please help with this?
Thanks in advance,
Isko

Main();
function Main() {
 var doc = app.activeDocument,
 pages = doc.pages,
 page, width, height;
 for (var i = 0; i < pages.length; i++) {
 page = pages[i];
 width = page.bounds[3] - page.bounds[1];
 height = page.bounds[2] - page.bounds[0];
 $.writeln("Page: " + page.name + " - " + "width = " + width + ", height = " + height);

How do I save the width and height of a photo for repeated use?

How do I save the width and height of a picture for repeated use, rather than having to enter it each time in the 'new file' box?
Thanks, Ed Jackson.

It could be that I'm older and have forgotten. I'm now 73 and will admit I have forgotten many things over the years. I have been using Photoshop since Photoshop version 3. And can not really recall which features or changes were made in ever version of Photoshop I have installed. Adobe has added many features over the years. The number of bugs introduce has also greatly increased after CS3. "New Doc Sizes.psp" in your user id preferences is edited using the two buttons in the new document dialog.
As for guide lines in new documents Photoshop CS6 or CC seem to add some for video file presets with guide lines. I do not know how to edit or add guide line to new doc presets. Guide line actions are easy to create. I have also seem some guideline in new documents when I did not expect any perhaps a new bug. Photoshop like most software has bugs. If you do not see Adobe new presets perhaps you copied an old "New Doc Sizes.psp" over Adobe's newer default file or Adobe migrared you presets and wand wiped their presets out. There are bugs. Close Photoshop down and rename your current "New Doc Sizes.psp" in you user id Photoshop cc preferences folder and start Photoshop it will add a dedault "New Doc Sizes.psp" file see if you see Adobe new presets in the new doc pull down when you select video and film...

Problem with Border Container width and height in %

I want to use bordercontainer in Vgroup and specify its width and height in % form.
But when we try to set width less than 18% or height less than 10% it takes the default values.
Why is it so???
Thanks in advance.
Ronak Shah

Probably a minWidth and minHeight set somewhere

Pdf in new window full width and height

Hi i managed to create a new window and add a pdf to it :
var pdf = new air.HTMLLoader();
pdf.height = 600;
pdf.width = 400;
pdf.load(request);
mywin = window.open("",
"pdfWindow","height=600,width=400,top=10,left=10");
mywin.nativeWindow.stage.addChild(pdf)
But i would like to make the pdf scale to the width and
height of the window , i tried width = '100%' but then it doesn't
show a pdf
for the current result see :
Screen

Okay i created a test :
var pdf = new air.HTMLLoader();
pdf.height = 600;
pdf.width = 400;
pdf.load(request);
mywin = window.open("",
"pdfWindow","height=700,width=500,top=10,left=10");
mywin.nativeWindow.stage.addChild(pdf)
pdf.width = mywin.nativeWindow.stage.stageWidth
pdf.height = mywin.nativeWindow.stage.stageheight
But then the pdf doesn't show, i also think this wouldn't
work on resize of the window ?
Or is there a event that is triggered

[svn] 3580: MXMLG-243 - Path does not draw in the correct location when width and height are set

Revision: 3580
Author: [email protected]
Date: 2008-10-10 16:24:50 -0700 (Fri, 10 Oct 2008)
Log Message:
MXMLG-243 - Path does not draw in the correct location when width and height are set
Fixed MatrixUtil.transformBounds to offset the four bound points by the origin
Bug: MXMLG-243
QA: Yes
Doc: No
Review: Evtim
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-243
http://bugs.adobe.com/jira/browse/MXMLG-243
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/MatrixUtil.as

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks MSDN Community Support Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

How to automate the changing of Width and Height of the document

Hi,
I just want to know if anyone already automate the changing of width and height of document(eps file).
Thanks,
Buddy

Check out SetDocumentSetup from kAIDocumentSuite.

How can I get the image width and height stored in database?

Hi!I write s servlet to display images store in database.but how can I get the image width and height?

Have you tryed using PJA or a similar library?
I presume you get java.lang.NoClassDefFoundError on the line :
Toolkit.getDefaultToolkit();?

SWF bgcolor, width and height

Similar Messages

Maybe you are looking for