Swf does not load the images on the web

I made a swf that works perfectly on my computer.
The swf does not load the images, cal with the buttons, when I use the swf on the web.
I think the problem is due to the fact that the web changes the path of the file, that is called with the following variable:
var ImmageUrl: String = "MyFolder2 /" + MynamePic + ".jpg";
The path is C:/MyFolder1 "(with the swf)" /MyFolder2 "(with the pics)"
Any hint ?
Thank you.

When you place an swf in a web page, any files that the swf loads have to be targeted as if the swf is sitting in the same folder as the html page. If you have the swf in a different folder than the html page, then you need to adjust the paths for the files it loads so that it acts as if it is in the html page's folder.

Similar Messages

Nexus 5010P-BF does not load system image

Hi experts,
We have a N5K-C50510P-BF. When these nexus starts that didn't booting any further than the kickstart. Here's the boot sequence log
User break into bootloader
Loader Version pr-1.3
loader>
loader> boot bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin
Booting kickstart image: bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin....
........................Image verification OK
<FF>serial 00:04: unable to assign resources
INIT: platform_type cmdline parameter not found. Asssuming Oregon.
I2C - Mezz absent
Starting Nexus5010 POST...
Executing Mod 1 1 SEEPROM Test......done
Executing Mod 1 1 GigE Port Test.......done
Executing Mod 1 1 Inband GigE Test.....done
Executing Mod 1 1 NVRAM Test....done
Executing Mod 1 1 PCIE Test...............................done
Mod 1 1 Post Completed Successfully
POST is completed
can't create lock file /var/lock/mtab~185: No such file or directory (use -n flag to override)
nohup: redirecting stderr to stdout
autoneg unmodified, ignoring
autoneg unmodified, ignoring
Checking all filesystems..... done.
Loading system software
No system image INIT: Sending processes the TERM signal !!! --
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
switch(boot)# sho ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
kickstart: version 5.2(1)N1(3)
kickstart image file is: bootflash:/n5000-uk9-kickstart.5.2.1.N1.3.bin
kickstart compile time: 12/4/2012 1:00:00 [12/04/2012 09:53:21]
Hardware
RAM 3619880 kB
bootflash: 4030464 kB
--More--
(none) kernel uptime is 0 days 0 hour 1 minute(s) 42 second(s)
I try to load the system image
switch(boot)# load bootflash:n5000-uk9.5.2.1.N1.3.bin
****************INIT: Sending processes the TERM signal
switch(boot)# INIT:
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
As you to see, Nexus5010 does not load system image, falls back to kickstart.
Plz help me.

Check the MD5 hash of the boot file. It could be corrupted.

Hierarchy Viewer does not load after clicking on the + icon

Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
                                                       - Responsible - ContactDetails
                    - Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
                                                                                                    -Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.

@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda

Ecore diagram editor does not load when I click the (aird) file

When I click on an aird file , which I created for the first time to graphically edit an ecore diagram, the diagram editor does not load, but instead, Eclipse opens the aird file as xml in a text editor! Why this is happening? and how can I solve this? any thoughts?
I am using Eclipse 4.4.2. in mac.
I updated the content, with the hope to get a reply.

Hi, sorry for the lag.
This might happen depending on the perspective you are using, please try with the "Modeling" perspective.
You should be able to load the .aird using right-click=>open and then see the corresponding diagrams as childs of the .aird file.

Can I revert back to prior mozilla. 6.0 does not load all images

many websites do not load all pictures and images since I updated to 6.0. Can I undo update?

*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Firefox 3.6.12 does not load nay images from Joomla sites 1.5.21 and above. Works on Safari but Not Firefox. This happened after the firefox upgrade. All Joomla 1.5.20 and below work ok. why is this happening?

I have been developing Joomla sites for more than 4 years now and generally all the Joomla sites work well in Firefox. In this case, however, ever since Joomla upgraded to 1.5.21 and above, all Joomla sites on this level are having problems with Firefox 3.6.12 loading images.
We have tested a number of Joomla template manufactures and all the results are the same.
This problem is with the macbook pro only thus far. All the other apple products, like the towers, etc. are fine.
Not sure why this is happening. Any advice would be greatly appreciated,
Thanks,
Leland

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Safari 7.0 does not loading big image.

Hi. I have Mac book pro (13-inch Early 2013).
I'm Korean. and my english level is very terrible.
but, My MacBook has some problem.
My Mac installed OSX10.9. and safari ver is 7.0.
If loading big image, safari is show black box.
But other brower is show image.
thanks for reading, my broken text.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot insafe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Swf does not load flv on server

This has been asked before but it doesn't appear to
have been answered... On my local workstations the swf loads and
runs the flv fine. They are both in the same directory. When I
upload the pair to a server (windows 2003) the swf no longer loads
the flv file. I've tried multiple workstations and two servers with
the same result. No matter where I put the swf/flv pair and no
matter how I try to load the swf (direct URL, in an HTML page by
itself or in the web page) the result is the same....
When I imbed the video in the swf it runs fine, so, the swf
runs okay it is specifically the loading and running of the flv
file by the swf file on the server. I don't think it's a network
issue because I've tested my workstations across the network and it
works fine. It is specifically when the swf tries to load a flv on
a server. I don't get an error message, just a blank swf holder.
It's not the flash code because I've tried multiple playback
components and they all give me the same resutl. Again, it appears
to be specifically related to the swf loading the flv on the
server.
It appears to be something that has happened in the last few
months (maybe I missed an update/) because I know it worked when I
first uploaded the site. It appears to have stopped working in the
last six weeks. I don't check my site on a daily basis but I last
updated my site about the end of January and it was working then...
I'm using studio 8...
THANKS...

quote:
Originally posted by:
jcasanova
Is the path
http://www.yoursite.yadayada/yadayada.flv
right?
Are you referring to the url in the object on the html page?
Is that supposed to be the swf?
<param name="movie" value="
http://www.yoursite.yadayada/yadayada.swf"
/>
tyroners,
If you have found a solution, please post it! I have been
working on this all day with no luck. Runs fine on localhost, but
on my WIN2003 server, it just shows the blank swf. I did read that
you also need to upload the skin swf file to the same directory if
you are using one.
I will post too when I fugure this one out
Thanks
G

Safari 7.0.1 does not load large images

When I use safari and try to load an image with a resolution above, say, 2000x2000, I get a black box, sometimes with a grey area in the corner. The correct image displays for a brief moment, about a half second, but not enough for my viewing pleasure. This usually happens when I click imgur links on reddit, such as this one. I just searched a very large image on google, and was able to load it no problem. I've tried turning off all extensions, but even with no extensions the images do not load. Any advice is much appreciated. Thank you!

Turning auto graphics off solved the issue for me: http://www.youtube.com/watch?v=QxSlQ-GNbik
Seems like Safari won´t render large images when you are using integrated grapchis.

Safari does not load large images

Images like on http://imgur.com/a/ZKhFa#zV5Hq9q do not load properly.
The load halfway, and when they become a certain size, they do not load anymore.
I have noticed this since OS X Mavericks.
Firefox and Chrome load these images properly.

Might be a Safari extension or third party plug-in preventing the images from loading properly.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.

To cure the March 2013 monthly Calendar problem I amended my All- Day events for April 1 to timed events on my iPad. Now the Calendar does not load at all on the iPad, but still OK on iPhone 5. Any suggestions please?

In order to cure the problem on my iPad of the month of March 2013 only causing the Calendar to close, I amended all "All Day" events on April 1 to timed events. Now my Calendar will not open, although my Calendar on an iPad 2 and on iPhones 5 & 4 work perfectly. I have tried turning iPad off/on, but no effect. Any ideas please?

I'm having the same issue with my 3rd gen iPad too. I always viewed my calendar in month view. It won't even open since it's stuck on month view.
I've quit the app (properly closing via taskbar) and re-opened - crashes immediatly.
Quit the app and rebooted (via holding home/power buttons until restart) and opened - still crashes immediatly.
Anyone know how I'm able to get access to the app so I can change all day events to timed events in April. Is it just April 1st or all of April? I haven't even opened my iPhones iCal yet to see if it's having the same issue.
Also, not sure if this will work but iCal on my mac wireless syncs my calendar events. I'm wondering if I change April 1st all day events to timed events whether it'll sync and fix the issue of crashing?

After effects CC does not load since I downloaded the new Apple OS X (Maverick)

Can anyone help me over-come this issue?

Hi this might help:
http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html

Firefox does not load long images, pixelates images if they are not in their original size, and has problems with thumbnails (in some sites)

Firefox has problems with images.
In sites like deviantART or ImageShack with full-view option, images that are not in full size/thumbnails get slightly pixelated e.g. http://img251.imageshack.us/f/screenshot2tq.jpg/
Long images get completely messed up if full-viewed e.g. http://img689.imageshack.us/f/screenshot5z.jpg/ (though if the file is only big, it loads just fine)
Also, thumbnails in some sites get messed up e.g. http://img201.imageshack.us/f/screenshotyr.jpg/
And in general, Firefox has more 'glitches' like not allowing to add more search engines. It wasn't like that before and I can only assume that it got messed up somewhere with updates, but I'm not really sure.
I've tried cleaning out cache, re-installing Firefox (multiple times) and even downloaded Firefox 4 beta, but the problem remains.
I use Ubuntu.
Does anyone else have similar problems? Or know where the problem lies?

Do you have the latest driver for your graphics display card?
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Swf does not load completely in browsers

Hello,
It looks like other people are having issues with
uploading/viewing, but I can't seem to find an answer to my
problem. There are pieces missing from my home page. When I go back
to the home page from the other pages (by clicking on "Lindsey
Sonu", the home page is complete. I have checked my site on three
different browsers, at all times of the day and on both a mac and
pc. I can't seem to figure out what is wrong. Please help!
www.lindseysonu.com
Thank you :)

So after hrs of searching forums and trying different things,
I still couldnt get my site to load completely until I decided that
maybe it could be a corrupt image that I used. It wasnt that
either, but then I remembered that this started happening after I
added a preloader. So I took the preloader off and now my site
loads correctly! Hallelujah! I'm still confused as to why that was
the problem. Maybe the site doesnt need a preloader b/c of its
small size. Anyway, I hope this helps anyone who comes across this
issue!

Application does not load correctly when deploying to standalone server

All,
I have created simple application implementing fusion theme. Applicaiton works fine when I run on integrated server but when deployed on standalone server it does not load any images or the theme itself. afrloop keep incrementing in status bar and ends up with java script error while later.
I deployed another test application on standalone server and that works fine i.e. theme gets loaded correctly. Also, how should I include images on the page? I have a images folder in web content folder but they dont get loaded.
Any help will be appreciated.
Thanks,
Dipal

LabVIEW now uses the Microsoft installer. It's possible that you need to upgrade the version that's on the Win2K box. I think the latest service packs from Microsoft include it.

Swf does not load the images on the web

Similar Messages

Maybe you are looking for