Swf does not publish properly, plays fine in preview browser.

I have scoured the internet looking for a solution, and I work with a team of professional Flash developers... Nobody can figure this out.
I have a SWF I've been trying to publish to the web. It's inside an AP div tag. The swf plays fine in Preview mode. When I publish, however, the swf does not play in Safari at all, and will only play in Firefox upon hitting "refresh." After this, the swf will load and play just fine, UNLESS YOU CLEAR YOUR HISTORY, at which point the same problem appears: you see nothing but a black, blank box.
"Yeah, I've heard that before, it's probably your javascript, blah blah blah..." Well, wait, just wait. The swf DOES load in both browsers. It just doesn't play. In order to get it to play, you have to right-click and select Play. I cannot, for the life of me, get it to just go ahead and play automatically when publishing.
But the REAL riddle of all this is that the swfs USED to play just fine until a few days ago. I've done nothing different in my publishing. I have rebuilt the page from scratch to no avail. And I haven't found anything on the internet that addresses this question directly. I've had a couple of developers try and mess with the code for me, and THEY can't get it to work, either. I am pretty much begging for any possible help on this, so thanks in advance.
I am a design-oriented user; I understand code only conceptually. If a code solution is the only solution, please be specific with where and how to implement the advice.
The actual page in question is here:
http://www.thecolodinproject.com/Media/Trailers/Trailer%2002_Lure/Trailer_Volume_02_Lure.h tml
I will be checking back at this page often to look for replies; I hope someone can help. Thanks.

Nope... As I said, the swf USED to run just fine, and still does in certain browsers. I haven't messed with the SWF at all since that time, so there isn't any logical reason it should be different now.

Similar Messages

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

After downloading iTones 10.5.1, the artwork matchs the song that is playing on my iMac but the artwork does not sync properly on my Apple TV. The artwork lags one cover behind. Is anyone else experiencing the same problem.

After downloading iTones 10.5.1, the artwork matchs the song that is playing on my iMac but the artwork does not sync properly on my Apple TV. The artwork lags one cover behind. Is anyone else experiencing the same problem.

I think it is just a bug, but it in very frustrating. I was using just now for about an hour and suddenly the correct artwork appeared for what was playing....but then all went wrong again!!
Apple, please, please issue a patch for this. It surely cannot be too complicated to correct.

I have just upgraded to Lion and I now find that my VPN network does not work properly. It worked fine with Leopard.

I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?

Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie

Music does not sync properly when updated to latest version. Can see computer but can't play from ipod

Music does not sync properly when updated to latest version. Can see on computer but can't play from ipod.

Hope this helps...
I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh. The following steps worked for me:
1. Open itunes and connect iphone 5 if not already. Uncheck all playlists, artists, etc. till nothing is checked to sync. Then uncheck the sync music box so that all music will be removed from the phone. Sync iphone
2. Eject device. Quit itunes (don't just close). unplug iphone.
3. Restart imac, macbook, or PC.
4. Restart iphone.
5. Now after power up, restart itunes then plug in iphone, check sync music and select music to sync. Sync iphone
6. It worked for me!!! Good luck.

Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
Not sure whats going on.
Worked fine using iOS4.3.5.
Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

I have downloaded and installed Photoshop Elements 12 on Windows7. It does not work properly. Help?

I downloaded Photoshop Elements 12 to work on my new platform Windows 7. It does not work properly. Specifically my problem is that I can only load one picture at a time onto the work area even if I have chosen two separate pictures. In other words I can not cut and paste not can I join pictures together.
If I load the program on my older computer with WindowsXP it works fine.
Any suggestions would be appreciated.

You have probably forgotten. In recent versions of PSE you must go to the edit>preferences>general and turn on Allow Floating Documents.

Edge Animate file does not view properly in Firefox

Adobe Edge Animate 1.0 file does not view properly in Firefox (3.5.19)—figure gets cropped... but looks fine in Chrome and Safari.
Here's a link to the file: http://127.0.0.1:54321/Users/breuter/Desktop/RD_Test%3AEdge/Flying_R_Man6.html?mode=previe w
Thanks for any help.

Hi Darrell,
Thanks for your note... this should help: http://rdtest03.businesscatalyst.com/index.html
It may take a few moments for the animation to load.
Cheers,
Bill

SWF does not appear when returning to browser tab

I got an odd bug report on a web app we are developing.
The swf appears fine for the most part, but is the user has multiple browser tabs open, moves to a differnt tab and then returns to the tab with the swf, the swf does not appear until the mouse scrolls over the swf.
At first glance it would look like the swf is not being redrawn until the user intereacts with it (we are doing a good amount of mosue polling). It it as if to save memory the browser stops displaying the image, and does not redeisplay until we explicitly redraw the stage.
Has anyone run into a similar situyation? I am not sure where to start with this.
Some potentially relevant apsects of the swf:
Most of the objects on the stage have chachAsBitmap set to true and we are applying a gradient mask to most of the stage, so there is a good amount of processing going on and I know thishas caused some other redraw oddities.
The frame rate is set to a very slow 4fps, and movie is controlled from a timmer.
Any leads would be appreciated.
The tester reporting this was using Chrome 9.0.597.107 and Flash player 11.3.300.26

Thank you very much! I was not aware of the ThrottleEvent, I'll try forcing a redraw when I recieve it.
Reading the documentation, it says the frame rate drops typically to between 2 and 8 fps. If I am running at 4 fps, with the swf still throttle down and back up? After reading this document http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c36cfb8137124318eebc6-8000.html I assume yes, but do you know if that is the case.
Hopefully the client will let me up the minimum player version to 11.2
Thanks again

When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

I am working with multiple PDF files in Acrobat Pro XI. Sometimes when I move a page from one PDF to another it does not view properly. It was fine in the source PDF, but not when moved to the desired PDF. I also see a message momentarily across the bottom of my screen that says "consolidating fonts". What must I do to fix this?

Lloyd ,
Follow these steps for Acrobat 11 .
Launch Acrobat>Tools>Print Production>Acrobat Distiller
Now in Acrobat Distiller follow these.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.
See if this helps.
Regards
Sukrit Dhingra

Swf does not publish properly, plays fine in preview browser.

Similar Messages

Maybe you are looking for